Significance of Stefan blowing effect on flow and heat transfer of Casson nanofluid over a moving thin needle

The current mathematical model explains the influence of non-linear thermal radiation on the Casson liquid flow over a moving thin needle by considering Buongiorno's nanofluid model.The influences of Stefan blowing, Dufour and Soret effects are also considered in the model. The equations which represent the described flow pattern are reduced to ordinary differential equations(ODEs) by using apt similarity transformations and then they are numerically solved with Runge–Kutta-Fehlberg's fourth fifth-order method(RKF-45) with shooting process. The impacts of pertinent parameters on thermal, mass and velocity curves are deliberated graphically.Skin friction, rate of heat and mass transfer are also discussed graphically. Results reveal that, the increase in values of Brownian motion, thermophoresis, Dufour number, heating and radiative parameters improves the heat transfer. The increasing values of the Schmidt number deteriorates the mass transfer but a converse trend is seen for increasing values of the Soret number. Finally,the escalating values of the radiative parameter decays the rate of heat transfer.     

Thermo-physical characteristics during the flow and heat transfer analysis of GO-nanoparticles adjacent to a continuously moving thin needle

Nanofluids have shown significant promise in thermal enhancement of many industrial systems and they have been used extensively in energy applications during recent years. Keeping such applications in mind, the present work exhibits a two-dimensional numerical simulation for the boundary layer flow of Graphene oxide (GO)-nanofluids adjacent to a thin needle along with heat transfer. Influence of heat generation/absorption and viscous dissipation have been included to explore the heat transport analysis. The nanofluid flow is generated due to a continuously moving horizontal thin needle. The non-linear expressions governing the flow and heat transfer analysis are changed into dimensionless form by introducing new dimensionless variables. The novelty of current study is to predict the multiple numerical solutions for dimensionless velocity and temperature fields. Numerical computations and graphical delineations were done with the assistance of MATLAB software. This study explores the impacts of several dimensionless key parameters, like, magnetic parameter, Prandtl number, nanoparticles volume fraction and ratio of needle's velocities on the flow and thermal distributions. The computational results have proved that the fluid temperature enhances for higher values of nanoparticles volume fraction while an opposite is true for velocity distributions. In addition, the computed outcomes revealed that for the case of upper branch solution, significant reduction in skin-friction coefficient is seen for higher magnetic parameter.     

Heat transfer over a stretching surface with variable heat flux in micropolar fluids

Heat transfer over a stretching surface with uniform or variable heat flux in micropolar fluids is investigated in this Letter. The boundary layer equations are transformed into ordinary differential equations, and then they are solved numerically by a finite-difference method. The effects of the material parameter K, Prandtl number Pr, velocity exponent parameter m, and heat flux exponent parameter n on the heat transfer characteristics are studied. It is found that the local Nusselt number is higher for micropolar fluids compared to Newtonian fluids.     

Casson fluid flow and heat transfer over a nonlinearly stretching surface

A boundary layer analysis is presented for non-Newtonian fluid flow and heat transfer over a nonlinearly stretching surface. The Casson fluid model is used to characterize the non-Newtonian fluid behavior. By using suitable transformations, the governing partial differential equations corresponding to the momentum and energy equations are converted into non-linear ordinary differential equations. Numerical solutions of these equations are obtained with the shooting method. The effect of increasing Casson parameter is to suppress the velocity field. However the temperature is enhanced with the increasing Casson parameter.     

Boundary layer flow and heat transfer of a Casson fluid past a symmetric porous wedge with surface heat flux

The aim of this paper is to investigate numerically the boundary layer forced convection flow of a Casson fluid past a symmetric porous wedge. Similarity transformations are used to convert the governing partial differential equations into ordinary ones. With the help of the shooting method, the reduced equations are then solved numerically. Comparisons are made with the previously published results in some special cases and they are found to be in excellent agreement with each other. The results obtained in this study are illustrated graphically and discussed in detail. The velocity is found to increase with an increasing Falkner-Skan exponent whereas the temperature decreases. With the rise of the Casson fluid parameter, the fluid velocity increases but the temperature is found to decrease in this case. Fluid velocity is suppressed with the increase of suction. The skin friction decreases with the increasing value of Casson fluid parameter. It is found that the temperature decreases as the Prandtl number increases and thermal boundary layer thickness decreases with the increasing value of Prandtl number. A significant finding of this investigation is that flow separation can be controlled by increasing the value of the Casson fluid parameter as well as by increasing the amount of suction.     

Dual solutions in boundary layer flow of a moving fluid over a moving permeable surface in presence of prescribed surface temperature and thermal radiation

An analysis of the heat transfer for a boundary layer forced convective flow past a moving permeable flat surface parallel to a moving fluid is presented. Prescribed surface temperature at the boundary is considered. A thermal radiation term in the energy equation is considered. The similarity solutions for the problem are obtained and the reduced ordinary differential equations are solved numerically. To support the validity of the numerical results, a comparison is made with the available results for some particular cases of this study. Dual solutions exist when the surface and the fluid move in the opposite directions.     

Effect of melting heat transfer and thermal radiation on Casson fluid flow in porous medium over moving surface with magnetohydrodynamics

In this study, the effects of variable fluid properties on heat transfer in MHD Casson fluid melts over a moving surface in a porous medium in the presence of the radiation are examined. The relevant similarity transformations are used to reduce the governing equations into a system of highly nonlinear ordinary differential equations and those are then solved numerically using the Runge–Kutta–Fehlbergmethod. The effects of different controlling parameters, namely, the Casson parameter,melting and radiation parameters, Prandtl number,magnetic field, porosity, viscosity and the thermal conductivity parameters on flow and heat transfer are investigated. The numerical results for the dimensionless velocity and temperature as well as friction factor and reducedNusselt number are presented graphically and discussed. It is found that the rate of heat transfer increases as the Casson parameter increases.     

Convective heat transfer flow of nanofluid in a porous medium over wavy surface

In this letter, water base nanofluid flow over wavy surface in a porous medium of spherical packing beds is investigated. The copper oxides particles are taken into account. These properties are rehabilitated when fluid interacts with porous walls. For porous medium, Dupuit–Forchheimer model; an extension of Darcy's law model is utilized. The natures of velocity and temperature profiles of nanofluid are discussed graphically whereas the values of convection heat transfer coefficient in the presence of different nanoparticles concentrations in porous medium is presented in tabular form. The obtained results illustrate that convection heat transfer is improved by nanoparticles concentration but reduces when fluid attract to pores structured medium. On the other hand, when particles are added in fluid, convection heat transfer rate is improved but flow velocity is declined.     

Exact solutions for the flow of Casson fluid over a stretching surface with transpiration and heat transfer effects

The effects of transpiration on forced convection boundary layer non-Newtonian fluid flow and heat transfer toward a linearly stretching surface are reported.The flow is caused solely by the stretching of the sheet in its own plane with a velocity varying linearly with the distance from a fixed point.The constitutive relationship for the Casson fluid is used.The governing partial differential equations corresponding to the momentum and energy equations are converted into non-linear ordinary differential equations by using similarity transformations.Exact solutions of the resulting ordinary differential equations are obtained.The effect of increasing Casson parameter,i.e.,with decreasing yield stress(the fluid behaves as a Newtonian fluid as the Casson parameter becomes large),is to suppress the velocity field.However,the temperature is enhanced as the Casson parameter increases.It is observed that the effect of transpiration is to decrease the fluid velocity as well as the temperature.The skin-friction coefficient is found to increase as the transpiration parameter increases.     

Melting phenomenon in magneto hydro-dynamics steady flow and heat transfer over a moving surfacein the presence of thermal radiation

The Lie group method is applied to present an analysis of the magneto hydro-dynamics(MHD) steady laminar flow and the heat transfer from a warm laminar liquid flow to a melting moving surface in the presence of thermal radiation.By using the Lie group method,we have presented the transformation groups for the problem apart from the scaling group.The application of this method reduces the partial differential equations(PDEs) with their boundary conditions governing the flow and heat transfer to a system of nonlinear ordinary differential equations(ODEs) with appropriate boundary conditions.The resulting nonlinear system of ODEs is solved numerically using the implicit finite difference method(FDM).The local skin-friction coefficients and the local Nusselt numbers for different physical parameters are presented in a table.     

Flow and heat transfer of a hybrid nanofluid past a permeable moving surface

A steady flow and heat transfer of a hybrid nanofluid past a permeable moving surface is investigated. In this study, 0.1 solid volume fraction of alumina (Al₂O₃) is fixed, then consequently, various solid volume fractions of copper (Cu) are added into the mixture with water as the base fluid to form Cu-Al₂O₃/water hybrid nanofluid. The similarity equations are obtained by converting the governing equations of the hybrid nanofluid using the technique of similarity transformation. The bvp4c function available in Matlab software is used to solve the similarity equations numerically. The numerical results are obtained for selected parameters and discussed in detail. It is found that hybrid nanofluid enhances the heat transfer rate compared to the regular nanofluid. The results show that two solutions exist up to a certain value of the moving parameter and suction strengths. The critical value in which the solution is in existence decreases as nanoparticle volume fractions increase. The temporal stability analysis is conducted in determining the stability of the dual solutions, and it is revealed that only one of them is stable and physically reliable.     

Dual solutions and stability analysis of flow and heat transfer of Casson fluid over a stretching sheet

The aim of the current study is to find out the dual solutions of the two-dimensional magnetohydrodynamic (MHD) flow of Casson fluid and heat transfer over the stretching sheet. The focus of the study is to examine the linear thermal radiation effects on dual solutions for both the steady and unsteady flow of Casson fluid over the stretching sheet under the influence of uniform magnetic field. The governing equations are formed as system of partial differential equations (PDEs). Using suitable transformations, the system of PDEs are converted into favorable nonlinear system of ordinary differential equations (ODEs). Simulations are performed in Maple 2015 to form the dual solutions in order to achieve the velocity, temperature, skin friction and heat transfer profiles of the Casson fluid over the stretching sheet. It is concluded that the dual solutions for the corresponding model are numerically stable. Furthermore, the upper branch solutions of the Casson fluid profiles are numerically stable as compared to the lower branch solutions. Results indicate that positive Eigen values of the MHD flow of Casson fluid provide stable profiles as compared to the negative Eigen values. It is believed that the current study would provide a base for the dual solution of the other types of the non-Newtonian fluid flows over various categories of surfaces.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.     

Heat transfer in boundary layer stagnation-point flow towards a shrinking sheet with non-uniform heat flux

In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types: direct power-law variation with the distance along the sheet and inverse power-law variation with the distance. The governing partial differential equations (PDEs) are transformed into non linear self-similar ordinary differential equations (ODEs) by similarity transformations, and then those are solved using very efficient shooting method. The direct variation and inverse variation of heat flux along the sheet have completely different effects on the temperature distribution. Moreover, the heat transfer characteristics in the presence of non-uniform heat flux for several values of physical parameters are also found to be interesting.     

MHD flow and heat transfer over a radially stretching/shrinking disk

A steady magnetohydrodynamic (MHD) flow past a radially stretching or shrinking disk is investigated. The governing partial differential equations are transformed into a set of ordinary (similarity) differential equations by a similarity transformation. These equations along with the corresponding boundary conditions are solved numerically using the boundary value problem solver (bvp4c) in Matlab. The effects of magnetic field and suction on the shear stress and the heat transfer are analyzed and discussed. It is found that both parameters affect more in the shrinking region. The increase in the magnetic parameter results in the increase of the skin friction coefficient but decrease in the local Nusselt number.The skin friction coefficient and the local Nusselt number increase as suction increases.     

The effect of magnetic fields on the stability of a cylindrical flow with mass and heat transfer

The effect of axial and radial magnetic fields on the Kelvin-Helmholtz stability of a cylindrical interface between the vapor and liquid phases of a fluid is studied when the vapor is hotter than the liquid and the two phases are enclosed between two cylindrical surfaces coaxial with the interface, and when there is mass and heat transfer across the interface. Both axisymmetric and asymmetric disturbances are considered. The linear dispersion relations are obtained and discussed. It is found that a uniform axial magnetic field has a stabilizing effect on the interface, while the effect of a radial magnetic field depends strongly on the choice of some physical parameters of the system. It is also found that the instability criterion is independent of heat and mass transfer coefficient, but it is different fromthat in the same problem without heat and mass transfer. Finally, the heat and mass transfer has a destabilizing influence on the system.     

Heat transfer analysis for stretching flow over a curved surface with magnetic field

The analysis of a viscous fluid flow and heat transfer is carried out under the influence of a constant applied magnetic field over a curved stretching sheet. Heat transfer analysis is carried out for two heating processes, namely, prescribed surface temperature (PST) and prescribed heat flux (PHF). The equations governing the flow are modeled in a curvilinear coordinate system (r, s, z). The nonlinear partial differential equations are then transformed to nonlinear ordinary differential equations by using similarity transformations. The obtained system of equations is solved numerically by a shooting method using Runge-Kutta algorithm. The interest lies in determining the influence of dimensionless radius of curvature on the velocity, temperature, skin friction, and rate of heat transfer at the wall prescribed by the Nusselt number. The effects of Hartmann number are also presented for the fluid properties of interest.     

Lattice Boltzmann simulation of viscous-fluid flow and conjugate heat transfer in a rectangular cavity with a heated moving wall

In the present work, conjugate heat transfer in a rectangular cavity with a heated moving lid is investigated using the lattice Boltzmann method (LBM). The simulations are performed for incompressible flow, with Reynolds numbers ranging from 100 to 500, thermal diffusivity ratios ranging from 1 to 100, and Prandtl numbers ranging from 0.7 to 7. A uniform heat flux through the top of the lid is assumed. Results show that LBM is suitable for the study of heat transfer in conjugate problems. Effects of the Reynolds number, the Prandtl number and the thermal diffusivity ratio on hydrodynamic and thermal characteristics are investigated and discussed. The streamlines and temperature distribution in flow field, dimensionless temperature and Nusselt number along the hot wall are illustrated. The results indicate that increase of thermal diffusivity yields the removal of a higher quantity of energy from lid and its temperature decreases when increasing the Reynolds and the Prandtl numbers.     

Influence of nucleation on the flow boiling heat transfer coefficient of a refrigerant mixture under varied heat flux conditions

The influence of nucleation on the flow boiling heat transfer coefficient of R-134a/R-290/R-600a refrigerant mixture is experimentally studied in a smooth horizontal tube of 12.7 mm diameter. The heat transfer coefficients are experimentally measured for stratified flow patterns under a varied heat flux condition; a condition found in the evaporator of refrigerators and deep freezers. The experiments are conducted in a counter-current heat exchanger test section. By regulating the flow rate and inlet temperature of acetone, which is the heating fluid flowing in the outer tube, a varied heat flux is provided to the refrigerant flowing in the inner tube. The refrigerant mass flow rate is fixed between 3 and 5 g s⁻¹ and its inlet temperature between −8.59 and 5.33°C, which corresponds to a pressure of 3.2 to 5 bar. The significance of nucleate boiling prevailing in the above-mentioned evaporators is highlighted. The experimental heat transfer coefficients are also compared with well known heat transfer correlations.     

Unsteady MHD flow and heat transfer of fractional Maxwell viscoelastic nanofluid with Cattaneo heat flux and different particle shapes

The paper aims to investigate the unsteady natural convection flow and heat transfer of fractional Maxwell viscoelastic nanofluid in magnetic field over a vertical plate. The effect of nanoparticle shape is first introduced to the study of fractional Maxwell viscoelastic nanofluid. Fractional shear stress and Cattaneo heat flux model are applied to construct the governing boundary layer equations of momentum and energy, which are solved numerically. The quantities of physical interest are graphically presented and discussed in detail. It is found that particle shape and fractional derivative parameters have profound influence on the flow and heat transfer.