Gel decomposition and formation of MgFe<Subscript>1.6</Subscript>Ga<Subscript>0.4</Subscript>О<Subscript>4</Subscript> powders

The thermal behavior of the gels that are formed in the synthesis of MgFe_1.6Ga_0.4О₄ powders was studied by differential scanning calorimetry and thermogravimetry (DSC–TG). The combustion temperatures of the gels in flowing air and flowing argon were determined from experimental data and thermodynamic calculations. The calculations of combustion temperatures from the heat flow of reaction versus time are shown to be a reliable tool to determine the parameters of gel combustion.     

Synthesis and Structure of [Co(NH<Subscript>3</Subscript>)<Subscript>6</Subscript>]<Subscript>2</Subscript>[W<Subscript>4</Subscript>Se<Subscript>4</Subscript>(CN)<Subscript>12</Subscript>]·8.5H<Subscript>2</Subscript>O

The compound [Co(NH₃)₆]₂[W₄Se₄(CN)₁₂]·8.5H₂O was obtained by evaporating an aqueous ammonia solution of K₆[W₄Se₄(CN)₁₂]·6H₂O and CoCl₂·6H₂O complexes. The starting Co(II) of CoCl₂·6H₂O transforms into [Co(NH₃)₆]³⁺ when exposed to air in a water-ammonia medium. Crystal data: triclinic crystal system, a = 10.7750(8) Å, b = 12.2843(9) Å, c = 19.6539(14) Å; α = 90.213(2)°, β = 99.910(2)°, γ = 114.737(1)°, V = 2319.1(3) ų, space group , Z = 2, D _x = 2.633 g/cm³.Original Russian Text Copyright © 2004 by I. V. Kalinina, Z. A. Starikova, F. M. Dolgushin, D. G. Samsonenko, and V. P. Fedin__________Translated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 5, pp. 905–908, September–October, 2004.     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

Solubility and stability of (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>SO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O<Subscript>2</Subscript> in organic and aqueous-organic media

Solubility and stability of (NH₄)₂SO₄·H₂O₂ in organic solvents (glycerol, ethylene glycol, TOSOL-A40 OM antifreeze), in mixtures of an organic solvent and water, and in pure water was studied. Crystallographic properties of the ammonium sulfate precipitating from aqueous-organic solvents and aqueous solutions in various time intervals and differing from ordinary (NH₄)₂SO₄ in solubility and one of crystallographic parameters were analyzed.     

Synthesis and structure of the complex [Mo<Subscript>3</Subscript>(μ<Subscript>3</Subscript>-S)(μ<Subscript>2</Subscript>-S<Subscript>2</Subscript>)<Subscript>3</Subscript>(Et<Subscript>2</Subscript>NCS<Subscript>2</Subscript>)<Subscript>3</Subscript>]I

The structure of tri-μ₂-disulfido-μ₃-thiotris(diethyldithiocarbamato)-S,S′-triangle-trimolybdenum iodide [Mo₃(μ₃-S)(μ₂-S₂)₃(Et₂NCS₂)₃]I was determined. The compound was characterized by differential thermal analysis and IR, Raman, and X-ray electronic spectroscopy.     

Synthesis and thermal analysis of indium-based hydrotalcites of formula Mg<Subscript>6</Subscript>In<Subscript>2</Subscript>(CO<Subscript>3</Subscript>)(OH)<Subscript>16</Subscript>·4H<Subscript>2</Subscript>O

Insight into the unique structure of layered double hydroxides (LDHs) has been obtained using a combination of X-ray diffraction and thermal analysis. Indium containing hydrotalcites of formula Mg₄In₂(CO₃)(OH)₁₂·4H₂O (2:1 In-LDH) through to Mg₈In₂(CO₃)(OH)₁₈·4H₂O (4:1 In-LDH) with variation in the Mg:In ratio have been successfully synthesised. The d(003) spacing varied from 7.83 Å for the 2:1 LDH to 8.15 Å for the 3:1 indium containing LDH. Distinct mass loss steps attributed to dehydration, dehydroxylation and decarbonation are observed for the indium containing hydrotalcite. Dehydration occurs over the temperature range ambient to 205 °C. Dehydroxylation takes place in a series of steps over the 238–277 °C temperature range. Decarbonation occurs between 763 and 795 °C. The dehydroxylation and decarbonation steps depend upon the Mg:In ratio. The formation of indium containing hydrotalcites and their thermal activation provides a method for the synthesis of indium oxide-based catalysts.     

Synthesis and crystal structure of Rb<Subscript>2</Subscript>[(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>(SeO<Subscript>4</Subscript>)] · 1.33H<Subscript>2</Subscript>O

The single crystals of Rb₂[(UO₂)₂(C₂O₄)₂(SeO₄)] · 1.33H₂O were synthesized and studied by X-ray diffraction. The crystals are monoclinic, space group P2₁/m, Z= 2, the unit cell parameters: a = 5.6537(8), b = 18.736(3), c = 9.4535(15) Å, β = 98.440(5)°, V = 990.6(3) ų, R ₁ = 0.0506. The main structural units of the crystal are infinite layers of [(UO₂)₂(C₂O₄)₂(SeO₄)]^2?, corresponding to the crystal chemical group A₂K ₂ ⁰² B² (A = UO ₂ ²⁺ , K⁰² = C₂O ₄ ^2? , B² = SeO ₄ ^2? ) of uranyl complexes. The uranium-containing layers are united into a three-dimensional framework through the electrostatic interactions with the outer-sphere rubidium ions and the hydrogen bonding system involving the outer-sphere water molecules.     

Crystal structure and thermal properties of [Au(en)<Subscript>2</Subscript>]<Subscript>2</Subscript>[Cu(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>]<Subscript>3</Subscript>·8H<Subscript>2</Subscript>O

The crystal structure of a double complex salt of the composition [Au(en)₂]₂[Cu(C₂O₄)₂]₃·8H₂O (en = ethylenediamine) at 150 K is determined by single crystal X-ray diffraction. The crystal data for C₂₀H₄₈Au₂Cu₃N₈O₃₂ are: a = 9.1761(3) Å, b = 16.9749(6) Å, c = 13.4475(5) Å, β = 104.333(1)°, V = 2029.43(12) ų, P2₁/c space group, Z = 2, d _x = 2.450 g/cm³. It is demonstrated that the thermal decomposition of the double complex salt in a helium or hydrogen atmosphere affords the solid solution Au_0.4Cu_0.6.     

Sol–gel synthesis and characterization of polycrystalline GdFeO<Subscript>3</Subscript> and Gd<Subscript>3</Subscript>Fe<Subscript>5</Subscript>O<Subscript>12</Subscript> thin films

Thin films of the perovskite and garnet structured gadolinium ferrites GdFeO₃ and Gd₃Fe₅O₁₂ have been synthesized by a sol–gel method, based on stoichiometric mixtures of acetyl acetone chelated Gd³⁺ and Fe³⁺ dissolved in 2-methoxy ethanol. After spin coating onto Si wafers, and heating in air at 700 °C for 20 h, neatly grown essentially single phase films were obtained. From X-ray photoelectron spectroscopy an iron deficiency is observed in the uppermost layer of both films, implying that the crystallites preferably end in planes rich in Gd and O but not in Fe. The films were also characterized by X-ray powder diffraction, scanning electron microscopy, infrared spectroscopy, and magnetic measurements.     

Impedance Study of the Conductivity of Solid Oxide Electrolyte Films SrZr<Subscript>0.95</Subscript>Y<Subscript>0.05</Subscript>O<Subscript>3–δ</Subscript> and CaZr<Subscript>0.9</Subscript>Y<Subscript>0.1</Subscript>O<Subscript>3–δ</Subscript>

Information on the across-plane conductivity of films of solid-oxide electrolytes SrZr_0.95Y_0.05O_3–δ and CaZr_0.9Y_0.1O_3–δ deposited on ion-conducting supports is acquired by the impedance method. It is shown that the support/film interface and the intergrain boundaries considerably affect the across-plane charge transfer in the film. The effect of the crystallographic orientation of the YSZ support on the microstructure and conductivity of the CaZr_0.9Y_0.1O_3–δ electrolyte film is demonstrated.     

Ionic mobility and electrophysical properties of solid solutions in PbF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> and PbF<Subscript>2</Subscript>–SnF<Subscript>2</Subscript>–SbF<Subscript>3</Subscript> systems

Ionic mobility and electrical conductivity of solid solutions with fluorite structure, obtained with solid-state approach in PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems, are studied by 19F NMR and electrochemical impedance spectroscopy methods. The 19F NMR spectra parameters, types of ion motions in the fluoride sublattice, and the ionic conductivity magnitude are shown to be determined by the temperature and fluoride concentration in the solid solutions. The solid solution specific conductivity in the PbF₂–SbF₃ and PbF₂–SnF₂–SbF₃ systems at 420–450 K is as high as ~10^–2 S/cm, which allows accounting the solid solutions as a base for preparation of functional materials.     

Synthesis and study of uranyl arsenate (UO<Subscript>2</Subscript>)<Subscript>3</Subscript>(AsO<Subscript>4</Subscript>)<Subscript>2</Subscript> · 12H<Subscript>2</Subscript>O

A method for producing synthetic troegerite of composition(UO₂)₃(AsO₄)₂ · 12H₂. Owas developed. X-ray diffraction, IR spectrometry, X-ray fluorescence analysis, and scanning calorimetry were used to study its dehydration and thermal decomposition, to solve the structgure, and to determine X-ray diffraction and IR spectroscopic characteristics.     

Phase equilibria in the Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–CdO system and the thermal stability of Cd<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and CdNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Phase equilibria were studied in the Nb₂O₅–CdO system in the Nb₂O₅-rich region including CdNb₂O₆ and Cd₂Nb₂O₇. It was determined that CdNb₂O₆ and Cd₂Nb₂O₇ in air are stable to 1150 and 1120°C, respectively, and that, above these temperatures, there is solid-phase decomposition of niobates with CdO release in the gas phase. Along with the cadmium oxide evaporation, the Cd₂Nb₂O₇ decomposition is accompanied by the formation of cadmium metaniobate CdNb₂O₆ and the CdNb₂O₆ decomposition results in the formation of niobium oxide Nb₂O₅. No thermal events were observed in the differential thermal analysis curve for a 1: 1 CdNb₂O₆–Cd₂Nb₂O₇ mixture heated to 1100°C in air, which suggests that there are neither phase transformations in cadmium niobates, nor a eutectic within this temperature and concentration ranges. A study of the morphology of compacted samples of niobates determined specific conditions for producing dense composite ceramics, a mixture of niobates, that is suitable for using as a dielectric material.     

Synthesis and Crystal Structure of [Co(H<Subscript>2</Subscript>O)<Subscript>6</Subscript>](C<Subscript>19</Subscript>H<Subscript>17</Subscript>O<Subscript>4</Subscript>SO<Subscript>3</Subscript>)<Subscript>2</Subscript>⋅8H<Subscript>2</Subscript>O

The title compound, cobalt 4′,7-diethoxylisoflavone-3′-sulfonate([Co(H₂O)₆](X)₂⋅8H₂O, X = C₁₉H₁₇O₄SO₃) was synthesized and its structure was determined by single-crystal X-ray diffraction analysis. It crystallizes in the triclinic space group P-1 with cell parameters a = 9.026(3) Å, b = 16.431(5) Å, c = 18.195(6) Å, α = 72.289(4)^∘, β = 87.498(4)^∘, γ = 82.775(5)^∘, V = 2550.1(13) Å⁻³, D_c = 1.419 Mg m⁻³, and Z = 2. The results show that the title compound consists of one cobalt cation, six coordinated water molecules, eight lattice water molecules, and two 4′,7-diethoxylisoflavone-3′-sulfonate anions, C₁₉H₁₇O₄SO⁻₃. Two anions have different conformations. Twelve H atoms of six coordinated water molecules, as donors, form hydrogen bonds with four oxygen atoms of sulfo-groups of two anions and eight oxygen atoms of eight lattice water molecules. In addition, π < eqid1 > ⋅ < eqid2 > π stacking interactions exist in the crystal structure, which together with hydrogen bonds lead to supramolecular formation with a three-dimensional network.     

Transformations of CO<Subscript>2</Subscript> in Two-Phase Systems C<Subscript>8</Subscript>F<Subscript>18</Subscript>–H<Subscript>2</Subscript>O and C<Subscript>6</Subscript>F<Subscript>6</Subscript>–H<Subscript>2</Subscript>O

The transformation of carbon dioxide in aqueous emulsions of perfluorons in the presence of oxygen in the air results in the formation of a mixture of oxalic acid and a minor set of organic compounds C₄–C₈. The maximum CO₂ consumption occurs in the emulsion with the C₈F₁₈: H₂O vol/vol ratio of 1: 0.42 at pH 2.4; the H₂C₂O₄ yield is 11 mol %.     

Crystal structure of Na<Subscript>3</Subscript>(NH<Subscript>4</Subscript>)<Subscript>2</Subscript>[Ir(SO<Subscript>3</Subscript>)<Subscript>2</Subscript>Cl<Subscript>4</Subscript>]·4H<Subscript>2</Subscript>O

The complex Na₃(NH₄)₂[Ir(SO₃)₂Cl₄]·4H₂O was examined with single crystal X-ray diffraction and IR spectroscopy. Crystal data: a = 7.3144(4) Å, b = 10.0698(5) Å, c = 12.3748(6) Å, β = 106.203(1)°, V = 875.26(8) ų, space group P2₁/c, Z = 2, d _calc = 2.547 g/cm³. In the complex anion two trans SO ₃ ^2? groups are coordinated to iridium through the S atom. The splitting of O-H bending vibrations of crystallization water molecules and N-H ones of the ammonium cation is considered in the context of different types of interactions with the closest neighbors in the structure.     

Synthesis and crystal structures of [K(H<Subscript>2</Subscript>O)(Piv)]<Subscript>∞</Subscript> and [K<Subscript>2</Subscript>(Phen)(H<Subscript>2</Subscript>O)<Subscript>2</Subscript>(Piv)<Subscript>2</Subscript>]<Subscript>∞</Subscript>

A method for the synthesis of potassium pivalates (trimethylacetates) from potassium tert-butoxide and pivalic acid was proposed. The complexes of the formulas [K(H₂O)(Piv)]_∞(I) and [K₂(Phen)(H₂O)₂(Piv)₂]_∞ (II) (Piv denotes the pivalate anion and Phen denotes 1,10-phenanthroline) were obtained and characterized by elemental analysis and IR and ¹H NMR spectroscopy. The crystal structures of complexes I and II were determined using X-ray diffraction. Crystal structure I has a layered motif with two nonequivalent K atoms (C.N.s 5 + 2 and 6). The coordination of phenanthroline in II gives rise to a ribbon motif, the structure containing three nonequivalent K atoms (C.N.s 6, 6 + 1, and 8).     

Quantum Chemical Study of Niobium and Tantalum M<Subscript>4</Subscript>O<Subscript>10</Subscript> Oxide Clusters and M<Subscript>4</Subscript>O<Stack><Subscript>10</Subscript><Superscript>–</Superscript></Stack> Anions

Structural parameters and vibrational frequencies of the clusters (T_d)–Nb₄O₁₀, (C_3v)-TaNb₃O₁₀, (D_2d)-Nb₄O ₁₀ ^– , and (C_s)-TaNb₃O ₁₀ ^– were calculated. According to the (U)DFT/SDD calculations with BLYP, B3LYP, and PBE0 functionals magnetization of the anion (D_2d)-Nb₄O ₁₀ ^– is distributed equally among four niobium atoms. In the anion (C_s)-TaNb₃O ₁₀ ^– unpaired electron presumably occupies niobium atoms. The distinction in contributions from Nb atoms in the magnetization of the tantalum-containing cluster grows with the exchange component of the DFT functional in the series of functionals BLYP < B3LYP < PBE0 < UHF.     

Synthesis and properties of (VO)<Subscript>0.09</Subscript>V<Subscript>0.18</Subscript>Mo<Subscript>0.82</Subscript>O<Subscript>3</Subscript> · 0.54H<Subscript>2</Subscript>O microrods

The (VO)_0.09V_0.18Mo_0.82O₃ · 0.54H₂O microrods of hexagonal symmetry system with the unit cell parameters a = 10.586 Å and c = 3.698 Å were obtained for the first time under hydrothermal conditions (T = 160°C, τ = 30?50 h). Particles were 1–2 μm in diameter and up to 45 μm in length. The compound is thermally stable up to 469°C. The core-electron Mo3d, V2p, and O1s and valence-band X-ray photoelectron spectra and IR spectra of the samples were studied. The molybdenum atoms in the complex oxide have the oxidation state Mo⁶⁺. The vanadium atoms introduced into the h-MoO₃ lattice in molybdenum positions have the oxidation state V⁵⁺. Approximately one-third of vanadium atoms as vanadyl ions (VO)²⁺ are located in the channels of h-MoO₃ lattice, thus stabilizing the latter.