Synthesis and high electrochemical performance of polyaniline/MnO2-coated multi-walled carbon nanotube-based hybrid electrodes

Multi-layered electrodes which consist of polyaniline (PANI)/manganese dioxide (MnO₂)-multi-walled carbon nanotubes (MWNTs) are prepared as the electrode materials for supercapacitors. MnO₂-MWNTs are made by the in situ direct coating method to deposit MnO₂ onto MWNTs; the core/shell structure of multi-layered fibrous electrodes can also be obtained by PANI coating onto the MnO₂-MWNTs. The effect of PANI coating on the electrochemical performance and cyclic stability of MnO₂-MWNTs is investigated. From the cyclic voltammograms, the PANI/MnO₂-MWNTs show remarkably enhanced specific capacitance and cycle stability compared to MnO₂-MWNTs, where the highest specific capacitance (350 F/g) is obtained at a current density of 0.2 A/g for the PANI/MnO₂-MWNTs as compared to 92 F/g for pristine MWNTs and 306 F/g for MnO₂-MWNTs. This indicates that the improved electrochemical performance of PANI/MnO₂-MWNTs is due to the enhanced electrical properties by nano-scale-coated MnO₂ onto MWNTs and the PANI coating that leads to the increased cycle stability by delaying the dissolution of MnO₂ during charge/discharge tests.     

三元复合材料PANI／Ag／MWNT的电化学行为和比电容

通过原位聚合的方式在银纳米粒子/多壁碳纳米管（Ag/MWCNT）复合材料的表面成功聚合苯胺单体制备了聚苯胺/银纳米粒子/多壁碳纳米管（PANI/Ag/MWCNT）三元复合材料苯．通过对三元复合材料的结构以及表面形貌进行分析,表明聚苯胺层完全包覆了Ag/MWCNT复合材料,形成了核壳式结构．同时银纳米粒子则以单质晶体的形态存在于多壁碳纳米管与聚苯胺层之间．三元复合材料电极在1 mol/L的KOH溶液中具有极低的阻抗,而与聚苯胺电极相比,这些复合材料电极则表现出更低的电阻、更高的电化学活性和更好的循环稳定性．尤其是当苯胺和Ag：MWCNTs质量比为5：5时,该复合材料电极在0.25 A/g的电流密度下表现出最大的比电容值为160 F/g．     

Preparation of polyaniline grafted multiwalled carbon nanotubes and conductive application in polyetherimide

A methodology for improving antistatic property of polyetherimide (PEI) composite using polyaniline (PANI) grafted multi‐walled carbon nanotubes (MWNTs) as conductive medium was proposed. First, the MWNTs grafted with PANI (PANI‐g‐MWNTs) were prepared by in‐situ polymerization in an emulsion system. Subsequently, PANI‐g‐MWNTs were blended with PEI using N‐methyl‐2‐pyrrolidone as solvent. After removing the solvent, the PEI/PANI‐g‐MWNT composite was prepared. As assisted conductive medium, the grafted PANI molecular chains on MWNT surface were dispersed in the PEI matrix to decrease the percolation value of the antistatic composites. The structure and morphology of PANI‐g‐MWNTs were characterized by Fourier transform infrared spectroscopy, transmission electron microscope, thermogravimetric analysis, and X‐ray powder diffraction, respectively. The dispersion of PANI‐g‐MWNTs in PEI matrix was studied by scanning electron microscope. The electrical performance was characterized by highly resistant meter. The volume resistivity of the conductivity percolation threshold was 1.781 × 10^?8 S/cm when the loading of PANI‐g‐MWNTs was 1.0 wt%. The conductivity of PANI‐g‐MWNTs/PEI composites was found to be higher than that of pristine MWNTs/PEI composite. Copyright © 2012 John Wiley & Sons, Ltd.     

Investigations on silver/polyaniline electrodes for electrochemical supercapacitors

Polyaniline (PANI) and silver doped polyaniline (Ag/PANI) thin films were deposited on stainless steel substrates by a dip coating technique. To study the effect of doping concentration of Ag on the specific capacitance of PANI the concentration of Ag was varied from 0.3 to 1.2 weight percent. Fourier transform-infrared and Fourier transform-Raman spectroscopy, and energy dispersion X-ray techniques were used for the phase identification and determination of the doping content in the PANI films, respectively. The surface morphology of the films was examined by Field Emission Scanning Electron Microscopy, which revealed a nanofiber like structure for PANI and nanofibers with bright spots of Ag particles for the Ag/PANI films. There was decrease in the room temperature electrical resistivity of the Ag/PANI films of the order of 10(2) with increasing Ag concentration. The supercapacitive behavior of the electrodes was tested in a three electrode system using 1.0 M H(2)SO(4) electrolyte. The specific capacitance increased from 285 F g(-1) (for PANI) to 512 F g(-1) for Ag/PANI at 0.9 weight percent doping of Ag, owing to the synergic effect of PANI and silver nanoparticles. This work demonstrates a simple strategy of improving the specific capacitance of polymer electrodes and may also be easily adopted for other dopants.     

PANI/MWCNT电极在硫酸锂溶液中电容性能

化学氧化法制备聚苯胺/多壁碳纳米管复合材料(PANI/MWCNT),扫描电镜(SEM)、XRD及IR表征样品结构及形貌,电化学方法测定复合电极循环伏安曲线、恒流充放电曲线及电极交流阻抗.结果表明,PANI/MWCNT电极在1mol/L的Li2SO4溶液中具有较好电容性能,在电流密度为5mA/cm2时,比电容为412F/g.PANI/MWCNT电极较PANI电极有更好的大电流放电能力,50mA/cm2下复合电极的比电容仍达318F/g,为5mA/cm2时该电极比电容的77.2%,而PANI电极的比电容仅为其5mA/cm2时的56.2%.交流阻抗证明碳纳米管降低复合电极的电阻,显著提高大电流放电能力.     

Influence of carbon shell structure on electrochemical performance of multi-walled carbon nanotube electrodes

Core/shell nanostructures have received considerable attention due to the synergistic effect of their combination of materials. In this work, core/shell carbon/multi walled carbon nanotubes (MWNTs) (C-MWNTs) composed of core MWNTs and carbon shells were prepared to obtain a new type of carbon electrode materials. Carbon shells containing nitrogen groups were prepared by coating polyaniline (PANI) onto the MWNTs by in situ polymerization and subsequent carbonization at 850 °C. After carbonization, the C-MWNTs contained 5.84% nitrogen and showed a hollow structure and crystallinity like that of pristine MWNTs. In addition, the C-MWNTs exhibited electrochemical performance superior to that of pristine MWNTs, and the highest specific capacitance (231 F g⁻¹) of the C-MWNTs was obtained at a scan rate of 0.1 A g⁻¹, as compared to 152 F g⁻¹ for pristine MWNTs. This superior performance is attributed to the maintenance of high electrical conductivity by the π–π interaction between the carbon layer and the MWNTs, increased specific surface area of C-MWNTs, and the presence of nitrogen groups formed on the carbon electrode after the carbonization of the shell PANI.     

Electrochemical Detection of DNA Hybridization Based on the Probe Labeled with Carbon‐Nanotubes Loaded with Silver Nanoparticles

A sensitive electrochemical method for the detection of DNA hybridization based on the probe labeled with multiwall carbon‐nanotubes (MWNTs) loaded with silver nanoparticles (Ag‐MWNTs) has been developed. MWNTs were electroless‐plated with a large number of silver nanoparticles to form Ag‐MWNTs. Probe single strand DNA (ss‐DNA) with a thiol group at the 3′‐terminal labeled with Ag‐MWNTs by self‐assembled monolayer (SAM) technique was employed as an electrochemical probe. Target ss‐DNA with a thiol group was immobilized on a gold electrode by SAM technique and then hybridized with the electrochemical probe. Binding events were monitored by differential pulse voltammetric (DPV) signal of silver nanoparticles. The signal difference permitted to distinguish the match of two perfectly complementary DNA strands from the near perfect match where just three base pairs were mismatched. There was a linear relation between the peak current at +120 mV (vs. SCE) and complementary target ss‐DNA concentration over the range from 3.1×10^?14 to 1.0×10^?11 mol/L with a detection limit of 10 fmol/L of complementary target ss‐DNA. The proposed method has been successfully applied to detection of the DNA sequence related to cystic fibrosis. This work demonstrated that the MWNTs loaded with silver nanoparticles offers a great promising approach for sensitive detection of DNA hybridization.     

The preparation of PANI/CA composite electrode material for supercapacitors and its electrochemical performance

Polyaniline (PANI)/carbon aerogel (CA) composite electrode materials were prepared by chemical oxidation polymerization. The morphology of PANI/CA composite was examined by scanning electron microscopy. The results showed that PANI was uniformly deposited onto the surface of porous CA and filled big inner pores of the CA. Electrochemical performance of the composite electrode was studied by cyclic voltammograms and galvanostatic charge/discharge measurements. The results indicated that the PANI/CA composite electrode had much better electrochemical performance, high reversibility, and high charge/discharge properties than CA. Moreover, the results based on cyclic voltammograms showed that the composite material has a high specific capacitance of 710.7 F g⁻¹, while the capacitance of CA electrode was only 143.8 F g⁻¹. Besides, the supercapacitor using the PANI/CA composite as electrode active material showed a stable cycle life in the potential range of −0.2–0.8 V.     

Electrocrystallized Ag nanoparticle on functional multi-walled carbon nanotube surfaces for hydrazine oxidation

4-Aminobenzoic acid was covalently grafted on multi-walled carbon nanotubes (MWNTs) by amine cation radical formation in the electrooxidation process of the amino-containing compound. Then, silver (Ag) nanoparticles were electrocrystallized on 4-aminobenzoic acid monolayer-grafted MWNTs by a potential-step method. The structure and nature of the resulting Ag/MWNT composites were characterized by transmission electron microscopy and X-ray diffraction. The electrocatalytic properties of the Ag/MWNT electrode for hydrazine oxidation have been investigated by cyclic voltammetry, high electrocatalytic activity of the Ag/MWNT electrode can be observed. This may be attributed to the small particle size of the silver particles. The results imply that the Ag/MWNT composites have a good application potential in fuel cells.     

Controllable deposition of a platinum nanoparticle ensemble on a polyaniline/graphene hybrid as a novel electrode material for electrochemical sensing

We demonstrate for the first time an interfacial polymerization method for the synthesis of high-quality polyaniline-modified graphene nanosheets (PANI/GNs), which represents a novel type of graphene/polymer heterostructure. The interfacial polymerization at a liquid-liquid interface allows PANI to grow uniformly on the surface of the GNs. An ultra-high loading of Pt nanoparticles was then controllably deposited on the surface of the PANI/GNs to form a Pt/PANI/GNs hybrid. The obtained composites were characterized by scanning electron microscopy, transmission electron microscopy, energy-dispersive spectrometry, X-ray diffraction, X-ray photoelectron spectroscopy, and thermogravimetric analysis. The Pt/PANI/GNs hybrid shows excellent electrocatalytic activity toward methanol oxidation and oxygen reduction. H(2)O(2) and glucose were used as two representative analytes to demonstrate the sensing performance of a Pt/PANI/GNs-modified electrode. It is found that this sensing element shows high sensitivity and a low detection limit for H(2)O(2) and glucose. The results demonstrate that the Pt/PANI/GNs hybrid may be an attractive and advanced electrode material with potential applications in the construction of electrochemical sensors and biosensors.     

In situ chemical fabrication of polyaniline/multi-walled carbon nanotubes composites as supports of Pt for methanol electrooxidation

Science China Chemistry - In this study, platinum (Pt)-polyaniline(PANI)/MWNTs catalysts were synthesized by two sequential reactions. First, core-shell structural PANI/MWNTs composites were...     

The Electrochemical Properties of Nanocomposite Films Obtained by Chemical In Situ Polymerization of Aniline and Carbon Nanostructures

Interactions between the π bonds in the aromatic rings of polyaniline (PANI) with carbon nanostructures (CNs) facilitate charge transfer between the two components. Different types of phenyleneamine‐terminated CNs, including carbon nano‐onions (CNOs) and single‐walled and multi‐walled carbon nanotubes (SWNTs and MWNTs, respectively), were prepared as templates, and the CN/PANI nanocomposites were easily prepared with uniform core–shell structures. By varying the ratio of the aniline monomers relative to the CNs in the in situ chemical polymerization process, the thickness of the PANI layers was effectively controlled. The morphological and electrical properties of the nanocomposite were determined and compared. The thickness and structure of the PANI films on the CNs were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and infrared spectroscopy. TEM and SEM revealed that the composite films consisted of nanoporous networks of CNs coated with polymeric aniline. The electrochemical properties of the composites were investigated by cyclic voltammetry and electrochemical impedance spectroscopy. These studies showed that the CN/PANI composite films had lower resistance than pure polymeric films of PANI, and the presence of CNs much improved the mechanical stability. The specific electrochemical capacitance of the CNO/PANI composite films was significantly larger than for pure PANI.     

Direct deposition of gold nanoparticles onto polymer beads and glucose oxidation with H2O2

Gold nanoparticles (Au NPs) were deposited directly from aqueous solution of diethylenediaminegold(III) complex onto polymer beads commercially available, such as poly(methyl methacrylate) (PMMA), polystyrene (PS), and polyaniline (PANI) without surface modification. The dropwise addition of NaBH4 to reduce Au(III) was found to be very effective to obtain small Au0 NPs with a narrow size distribution except for PANI. The catalytic performance of Au NPs deposited on polymer beads for H2O2 decomposition and glucose oxidation with H2O2 were more significantly affected by the kinds of polymer supports than by the size of Au NPs. The equimolar oxidation of glucose with H2O2 could be operated by controlling the decomposition rate of H2O2 over Au/PMMA.     

Fabrication of 3D ordered needle-like polyaniline@hollow carbon nanofibers composites for flexible supercapacitors

Carbon nanofiber-based supercapacitors have broad prospects in powering wearable electronics owing to their high specific capacity,fast charge/discharge process,along with long-cycling life.Herein,a poly(ac rylo n it rile-co-β-methyl hydrogen itaconate) copolymer was prepared and used to synthesize flexible hollow carbon nanofibers(HCNFs) via an electrospinning method without breaking after multiple bending.Subsequently,the inner and outer surfaces of HCNFs were evenly covered with ordered needlelike polyaniline(PANI) through in-situ polymerization methods to obtain three-dimensional flexible HCNFs/PANI composites,which exhibited a high capacity 1196.7 F/g at 1 A/g and good cycling stability(90.1% retention at 5 A/g after 3000 cycles).The symmetrical supercapacitor based on the HCNFs/PANI composites also delive red an outsta nding electrochemical performance with high energy/power density(60.28 Wh/kg at 1000 W/kg) and superior cycling durability(90% capacitance retention after at 5 A/g3000 cycles),which confirmed that the HCNFs/PANI composites had a wide application potential in flexible energy storage devices.     

Facile synthesis of multifunctional multiwalled carbon nanotubes/Fe3O4 nanoparticles/polyaniline composite nanotubes

With an average diameter of 100-150 nm, composite nanotubes of polyaniline (PANI)/multiwalled carbon nanotubes (MWNTs) containing Fe₃O₄ nanoparticles (NPs) were synthesized by a two-step method. First, we synthesized monodispersed Fe₃O₄ NPs (d=17.6 nm, σ=1.92 nm) on the surface of MWNTs and then decorated the nanocomposites with a PANI layer via a self-assembly method. SEM and TEM images indicated that the obtained samples had the morphologies of nanotubes. The molecular structure and composition of MWNTs/Fe₃O₄ NPs/PANI nanotubes were characterized by Fourier transform infrared spectra (FTIR), energy dispersive X-ray spectrometry (EDX), X-ray photoelectron spectra (XPS), X-ray diffraction (XRD) and Raman spectra. UV-vis spectra confirmed the existence of PANI and its response to acid and alkali. As a multifunctional material, the conductivity and magnetic properties of MWNTs/Fe₃O₄ NPs/PANI composites nanotubes were also investigated.     

Thermal conductivity enhancement of MWNTs on the PANI/tetradecanol form-stable PCM

We prepared PANI/tetradecanol/MWNTs composites via in-situ polymerization. DSC results indicated that the composites are good form-stable phase change materials (PCMs) with large phase change enthalpy of 115 J g⁻¹. The MWNTs were randomly dispersed in the composites and significantly enhanced the thermal conductivity of the PCMs from 0.33 to 0.43 W m⁻¹ K⁻¹. The form-stable PCMs won’t liquefy even it is heated at 80°C, so that the MWNTs were fixed in the composite and the phase separation of the MWNTs from PANI/tetradecanol/MWNTs composites won’t occur.     

Thermal stability and glass transition behavior of PANI/MWNT composites

Polyaniline/multi-walled carbon nanotube (PANI/MWNT) composites were prepared by in situ polymerization. Transmission electron microscope (TEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) were used to characterize the PANI/MWNT composites. Thermal stability and glass transition temperature (T _g) were measured by thermogravimetry (TG) and temperature modulated differential scanning calorimetry (TMDSC), respectively. The TG and derivative thermogravimetry (DTG) curves indicated that with augment of MWNTs content, the thermal stability of PANI/MWNT composites increased continuously. While, T _g increased and then decreased with the MWNTs content increasing from 0 to 20 mass%.     

Thermal stability of several polyaniline/rare earth oxide composites

Polyaniline/rare earth oxide composites (PANI/La₂O₃ and PANI/Sm₂O₃) were synthesized by in situ polymerization at the presence of sulfosalicylic acid (as dopant). The composites obtained were characterized by Fourier transform infrared spectra (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). The thermal stability of the composites was investigated by thermogravimetry (TG) and derivative thermogravimetry (DTG). The electrochemical performance of the composites was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results of FTIR, XRD, SEM, CV, and EIS show that the structure of composite has changed greatly when rare earth oxide content is >0.7 g (PANI/La₂O₃[w/w(92.7/7.3)] and PANI/Sm₂O₃[w/w(96.2/3.8)]) and the PANI in the composite has transformed into pernigraniline base (non-conducting state) from emeraldine base (conducting state). TG-DTG analysis indicates that the thermal stability of composite was higher than pure PANI, which is attributed to the interaction between PANI and rare earth oxide.     

Highly Sensitive Enzyme-free Sensor Based on a Carbon Paste Electrode Modified with Binary Zinc Oxide/Polyaniline Nanocomposites for Dopamine,Ascorbic Acid and Uric Acid Sensing

Hybrid composites ZnO/PANI were facily synthesized by a sonication process at room temperature. This procedure is non-expensive, time/energy saving and environmentally safe. The as-prepared ZnO/PANI were characterized by FTIR, UV-vis spectroscopies and SEM in order to investigate the structure and morphology of the studied composites. The samples were used to modify carbon paste electrode (CPE) in order to develop electrochemical biosensors (ZnO/PANI/CPE). The sensing properties of the nanoparticles were evaluated for dopamine, ascorbic acid and uric acid non-enzymatic detection. The effect of percentage of polyaniline in the composites and the effect of calcination on the biosensor's response were also examined in the present study. It was revealed that the existence of PANI in ZnO/PANI/CPE largely enhanced the electroactive surface area and therefore the sensitivity for electrochemical sensing. A good electrochemical behavior was noted for ZnO/40 wt% PANI-cal/CPE modified electrode toward DA, AA and UA oxidation. The electroactive surface area of the previously mentioned modified electrode (0.235 cm²) was two times higher than that of the bare electrode (0.117 cm²). The liner relationships between current intensities and concentrations were found to be 0.01–1.4 mM, 0.1–1.3 mM and 0.01–0.12 mM, with detection limit of 0.029 mM, 0.063 mM and 0.007 mM, for DA, AA and UA respectively. In the mixtures of ascorbic acid (AA), dopamine (DA) uric acid (UA) and glucose (Glu) the sensor showed high selectivity of DA with low interference of ascorbic acid by a current change of 14 %. The as-prepared ZnO/PANI/CPE biosensor displayed a good reproducibility and stability.     

超级电容器用含氮碳与含氮碳/炭气凝胶复合电极材料的制备和性能研究

采用原位聚合法合成聚苯胺(PAIN)及聚苯胺/炭气凝胶(PAIN/CA)复合材料,经过高温裂解制备含氮碳(NC)及含氮碳/炭气凝胶复合材料(NC/CA),再以KOH为活化剂对其进行活化,制备活化含氮碳(ANC)及活化含氮碳/炭气凝胶复合材料(ANC/CA)。采用扫描电镜、循环伏安、恒流充放电以及电化学阻抗等方法进行性能测试,结果表明,由于KOH的活化作用,含氮碳材料的粒径明显变小,其比电容值为138 F/g,高于未活化含氮碳材料(98 F/g),ANC/AC3复合材料电极的比电容值比ACA电极(88 F/g)高,达到127 F/g。