TiO2-anatase-supported oxorhenate catalysts prepared by oxidative redispersion of metal Re0 for methanol conversion to methylal: A multi-technique in situ/operando study

TiO₂-anatase-supported rhenium catalysts were prepared by oxidative redispersion of metallic rhenium. The structure and the activity of the as-prepared catalysts were found to be similar to those prepared by the incipient wetness impregnation technique. Interestingly, our results suggest that the active phase of those catalysts retain oxorhenate species in which the rhenium could be involved as Re⁶⁺ in small clusters, as suggested by UV–visible absorption and XPS experiments. Such catalysts were found to be highly active in methanol conversion to methylal. However, we have evidenced that the low rhenium surface coverage catalyst is prone to surface poisoning because of the formation of rhenium carbonyl species and coke in the absence of oxygen. A comprehensive multi-techniques in situ and operando study made it possible to show that the redox couple(s) implied in the target reaction involve Re⁷⁺, Re⁶⁺and Re⁴⁺ species and to make a rational link between the pieces of the puzzle.     

Ultradeep Hydrodesulfurization of Dibenzothiophene (DBT) Derivatives over Mo-Sulfide Catalysts Supported on TiO2-Coated Alumina Composite

The present paper reviews in detail the different studies now being conducted by our research team concerning the ultradeep hydrodesulfurization (HDS) of dibenzothiophene (DBT) derivatives over Mo/TiO₂ and Mo/TiO₂–Al₂O₃ catalysts. First, a detailed characterization of Mo/TiO₂ (P-25 Degussa, 50 m²/g) catalysts prepared by equilibrium adsorption technique shows that Mo- species are highly and uniformly dispersed on the surface of titania up to 6.6 wt% MoO₃ loading. Above this value, some aggregation of Mo occurs, leading to the formation of bulk MoO₃. Below 6.6 wt% MoO₃ loading, the Raman spectroscopy data of the calcined samples show that the supported Mo-species possess a highly distorted octahedral MoO₆ structure. TiO₂–Al₂O₃ composites were prepared by chemical vapor deposition (CVD) using TiCl₄ as a precursor. Using several characterization techniques, we demonstrated that the support composite presents a high dispersion of TiO₂ over -Al₂O₃ without forming precipitates up to ca. 11 wt% loading. Moreover, the textural properties of the composite support are comparable to those of alumina. Under the present sulfidation conditions (673 K, 5%H₂S/95%H₂), Mo-species supported on TiO₂ are better sulfided than on alumina, as demonstrated using XPS. This can be attributed to the relatively lower interaction between Mo-species and titania. The state of sulfide species supported on the composite support can be considered as a transition state between TiO₂ and Al₂O₃. However, at relatively higher TiO₂ loadings (ca. 11 wt%), Mo/TiO₂–Al₂O₃ catalysts exhibit sulfidability similar to that of Mo/TiO₂. The HDS tests conducted in both the laboratory and in industry show that sulfide catalysts supported on TiO₂–Al₂O₃ (ca. 11 wt% TiO₂) are more active than those supported on TiO₂ or Al₂O₃.     

SiO2负载氮掺杂TiO2可见光响应光催化剂的制备及性能

以四氯化钛为钛源,尿素为氮源,采用液相水解-沉淀法制得SiO2负载N掺杂TiO2可见光响应TiO2-xNy/SiO2光催化剂(TSN)。以苯酚为模型物,考察了TSN在可见光区、紫外光区及太阳光下的光催化活性,以及催化剂的使用寿命、分离性能。采用XPS、FTIR、UV-Vis DRS、XRD、TEM和低温氮物理吸附等对催化剂的结构进行表征。结果表明,N以阴离子形式进入TiO2体相并置换晶格中的O,适量N掺杂的TSN在紫外光区、可见光区及太阳光下均表现出较高的活性。SiO2与TiO2界面间有Ti-O-Si键形成,结合牢固。N掺杂在TiO2表面生成Ti-O-N键,形成新的能级结构,使催化剂的吸收红移至450~500 nm,诱发TiO2可见光催化活性。SiO2负载可减小TiO2颗粒平均尺寸,增加催化剂比表面积;同时SiO2负载还可改善催化剂的分离性能,提高催化剂使用寿命。     

载有C60的TiO2纳米粒子光催化活性

以水溶性C₆₀和TiO₂粒子为前驱体,采用水热法制备了载有C₆₀的锐钛矿型TiO₂纳米粒子。应用X射线衍射、透射电子显微镜、红外光谱、紫外-可见漫反射光谱、荧光光谱对产物进行了表征。以对-硝基苯酚为模型污染物研究了产物的光催化活性,结果表明适量负载C₆₀可以提高TiO₂纳米粒子的光催化活性,C₆₀起着传输电子、促进TiO₂光生载流子分离的作用,且经7次循环使用后对-硝基苯酚的降解效率仍能达到74%。讨论了载有C₆₀的TiO₂纳米粒子光催化降解对-硝基苯酚的机理。     

Mn-Mo-W-O_x脱硝催化剂活性组分的配伍优化

采用等体积浸渍法制备系列Mn-Mo-W-O_x/堇青石和Mn-Mo-W-O_x/TiO_2催化剂,用于选择性催化还原NO.通过Mn、Mo、W 3种元素不同配比对催化剂配伍进行优化,确立Mn-Mo-W-O_x最佳配比.采用XRD、N_2-BET、PyIR、SEM以及XPS等表征分析催化剂的固相结构、比表面积、酸量、表面形貌和表面元素.结果表明:当Mn/Mo/W元素摩尔比为10∶0.5∶1,载体为TiO_2时,催化剂的催化性能最优.适量Mo掺入Mn-W-O_x催化剂可以增大其比表面积,提高催化剂表面L酸酸量以及Mn~(4+)离子浓度,从而有效提高了催化剂高温活性.载体替换为TiO_2时催化剂的比表面积和酸量明显提高,从而增强了催化剂的脱硝性能.     

Efficient oxidative degradation of 2-chlorophenol and 4-chlorophenol over supported CuO-based catalysts

A series of metal oxide catalysts for catalytic oxidative degradation of 2-chlorophenol (2-CP) and 4-chlorophenol (4-CP) were prepared, and the supported CuO catalysts were studied particularly. The supported CuO catalysts were characterized by XRD and NH3-TPD techniques, in which CuO/γ-Al2O3 exhibited high degradation activity. The addition of Na2O or K2O into CuO/γ-Al2O3 improved the oxidative degradation of CPs remarkably, in which Na2O was more efficient than K2O. Over CuO/γ-Al2O3-Na2O, CPs were completely converted and the liberation of the inorganic chloride from 2-CP or 4-CP reached 97% or 100% respectively at 30 ?C for 2 h. The supported CuO catalysts with good dispersion of CuO particles and less acid sites were favorable for the efficient oxidative degradation of CPs. In addition, the initial pH of the reaction solution was found to be an important factor which influenced the catalytic oxidative degradation of CPs and the initial pH of 11.2 and 9.8 was preferred for the oxidative degradation of 2-CP and 4-CP respectively over CuO/γ-Al2O3 catalyst.     

Monolith Manganese-Based Catalyst Supported on ZrO2-TiO2 for NH3-SCR Reaction at Low Temperature

Monolith catalysts were prepared using TiO₂ and ZrO₂-TiO₂ as supports with MnO₂ as active component and Fe₂O₃ as promoter. The catalytic activities at low temperature and stability at high temperature for selective catalytic reduction of NO_x with NH₃ (NH₃-SCR) in the presence of excessive O₂ were studied after the catalysts calcined at different temperatures. The catalysts were characterized by X-ray diffraction (XRD), specific surface area measurements (BET), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results indicated that the catalyst supported on ZrO₂-TiO₂ had excellent stability at high temperature, and possessed high specific surface area and oxygen storage capacity, and had strong redox property. The results of the catalytic activities indicated that the monolith manganese-based catalyst using ZrO₂-TiO₂ as support had evidently improved the activity of NH₃-SCR reduction reaction at low temperature, and it showed great potential for practical application.     

Calorimetric Characterization of Surface Reactivity of Supported Ga2O3 Catalysts

The surface properties of supported gallium oxide catalysts prepared by impregnation of various supports (γ-Al₂O₃, SiO₂, TiO₂, ZrO₂) were investigated by adsorption microcalorimetry, using ammonia and water as probe molecules. In the case of acidic supports (γ-Al₂O₃, ZrO₂, TiO₂), the acidic character of supported gallium catalysts always decreased in comparison with gallium-free supports; on very weakly acidic SiO₂, new acidic centers were created when depositing Ga₂O₃. The addition of gallium oxide decreased the hydrophilic properties of alumina, titania and zirconia, but increased the amount of water adsorbed on silica. The catalytic performances in the selective catalytic reduction of NO by C₂H₄ in excess oxygenwere in the order Ga/Al₂O₃>Ga/TiO₂>Ga/ZrO₂>>Ga/SiO₂. This order is more related to the quality of the dispersion of Ga₂O₃ on the support than to the global acidity of the solids. This revised version was published online in July 2006 with corrections to the Cover Date.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO_2负载型催化剂,并将其用于CO2加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%(质量百分数)时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO2的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

Unusual Extensional Rheology and Dispersion Behavior of High Impact Polystyrene/TiO2 Nanocomposites Prepared by Melt‐Compounding

The extensional rheology and dispersion behavior of high impact polystyrene (HIPS) and HIPS/TiO₂ nanocomposites prepared by melt‐compounding were investigated. The influence of ethylene‐vinyl acetate (EVA) copolymer on the extensional rheology of HIPS/TiO₂ masterbatches was also researched. The rheological experiments investigated with Rosand Presicion Rheometer confirmed that the HIPS/TiO₂ masterbatches, the HIPS/EVA/TiO₂ masterbatches and the HIPS/TiO₂ nanocomposites with low TiO₂ loading shown different extensional rheology in comparison to the pure HIPS. Field‐emission scanning electron microscopy (FE‐SEM) shown the dispersion morphology of TiO₂ nanoparticles in HIPS based nanocomposites and indicated the influence of TiO₂ dispersion behavior on the unusual extensional rheology of HIPS nanocomposites.     

Preparation of TiO2 nano-particle photocatalysts by a multi-gelation method: the effect of pH change

TiO₂ photocatalysts were prepared by a multi-gelation method and the effect of the changes in the pH during the pH swing times, i.e., by a controlled pH swing, on the morphology of the TiO₂ particles was investigated. The photocatalytic properties of the TiO₂ catalysts prepared by controlled pH swing were compared with TiO₂ particles prepared without adjusting the pH during the swing times. The photocatalytic degradation reaction of these TiO₂ catalysts was investigated by comparing their effectiveness in 2-propanol oxidation. The experimental results showed that the TiO₂ photocatalysts prepared without adjusting the pH performed better in controlling the important parameters of the catalysts such as particle size, surface area, anatase/rutile phase ratio and pore size, as well as pore volume than the TiO₂ photocatalysts prepared by a controlled pH swing method. Deceased.     

States of cobalt and iron in catalysts supported on TiO2 from data of diffuse reflectance IR spectra of adsorbed carbon monoxide

The variations in the oxidation states of cobalt and iron atoms in pure and mixed Co- and Fe-containing catalysts supported on TiO₂ as a function of the conditions in which the catalysts were prepared and preliminarily treated were studied by analysis of the IR spectra of carbon monoxide adsorbed on these catalysts. A mutual influence of the components was discovered; iron was found to promote reduction of cobalt.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 1946–1951, October, 1995.     

CuO Catalysts Supported on Porous TiO2 Microspheres for Low-Temperature CO Oxidation

The porous TiO₂ microspheres were prepared by the reversed-phase suspension polymerization and sol-gel method using reversed-phase suspension droplets as the templates. The CO oxidation catalytic properties of the CuO/TiO₂ catalysts prepared by hydrothermal method and impregnation method were extensively investigated. The structure of CuO/TiO₂ catalysts was determined by TG-DTA, XRD, TEM, and XPS. The results indicated that the redox capacity of CuO/TiO₂ was greatly depended on the aqueous solution concentration of Cu(NO₃)₂ used in the preparation of CuO/TiO₂ and the calcination temperature of the CuO/TiO₂ catalysts.     

SO42-改性后的TiO2(锐钛和/或金红石)表面上MoO3的分散性质研究

采用红外(IR)、拉曼(Raman)、X-射线衍射(XRD)、程序升温还原(TPR)等方法考察了经硫酸根改性后的金红石(SR)与锐钛矿(SA)的混合比例变化时的负载型催化剂，MoO₃ / TiO₂(SR+SA)，的一些物理化学性质(如活性组分MoO₃的分散行为、表面酸碱性、氧化还原性)的变化规律。结果表明：对于MoO₃ / TiO₂(SR+SA)样品，低含量MoO₃表面分散时倾向于优先与混合载体中的改性金红石(SR)发生作用；TiO₂载体表面SO₄^2-的存在，使得载体表面产生了新的酸性位，导致样品中表面分散的钼物种主要以聚合八面体状态存在。     

Preparation and Characterization of Bismuth Doped TiO2 Thin Films

A series of Bismuth-doped titanium oxide (Bi-doped TiO₂) thin films on glass substrates have been prepared by sol-gel dip coating process. The prepared catalysts were characterized by XRD and XPS. The photocatlytic activity of the thin film catalysts was evaluated through the photodegradation of aqueous methyl orange under UV illumination. The experiments demonstrated that the Bi-doped TiO₂ prepared was anatase phase. The doped bismuth was in the 3⁺ oxidation state. The presence of Bi significantly enhanced the photocatalytic activity of TiO₂ films. At calcination temperature of 500°C, with doping concentration of 2 wt %, Bi-doped TiO₂ thin film showed the highest photocatalyic activity.     

TiO2基固体超强酸的制备及光催化性能研究

半导体氧化物TiO2对很多有机污染物吸附较强、催化氧化活性高,因此它在环境污染治理方面扮演极其重要的角色,被广泛用于光催化处理多种有机物,但常规二氧化钛半导体光催化剂较低的量子效率(约4%)使其应用受到一定程度的制约[1]。1979年H ino[2]等首次报道无卤素型SO42-/M xO y固体超强酸体系以来,引起化学工作者极大关注。固体超强酸催化剂如SO42-/TiO2,SbF5/SiO2/TiO2等是一类新型酸催化剂,广泛用于酯化反应、苯衍生物烷基化、烯烃齐聚等。研究发现,基于SO42-改性的TiO2固体超强酸催化剂对于有机物具有较高的光催化氧化活性[3,4],…     

Effect of TiO2 Calcination Pretreatment on the Performance of Pt/TiO2 Catalyst for CO Oxidation

In order to improve the CO catalytic oxidation performance of a Pt/TiO₂ catalyst, a series of Pt/TiO₂ catalysts were prepared via an impregnation method in this study, and various characterization methods were used to explore the effect of TiO₂ calcination pretreatment on the CO catalytic oxidation performance of the catalysts. The results revealed that Pt/TiO₂ (700 °C) prepared by TiO₂ after calcination pretreatment at 700 °C exhibits a superior CO oxidation activity at low temperatures. After calcination pretreatment, the catalyst exhibited a suitable specific surface area and pore structure, which is beneficial to the diffusion of reactants and reaction products. At the same time, the proportion of adsorbed oxygen on the catalyst surface was increased, which promoted the oxidation of CO. After calcination pretreatment, the adsorption capacity of the catalyst for CO and CO₂ decreased, which was beneficial for the simultaneous inhibition of the CO self-poisoning of Pt sites. In addition, the Pt species exhibited a higher degree of dispersion and a smaller particle size, thereby increasing the CO oxidation activity of the Pt/TiO₂ (700 °C) catalyst.     

负载型CuO/TiO2催化剂催化CO2加氢制甲醇

采用浸渍法制备了CuO/TiO₂负载型催化剂,并将其用于CO₂加氢制甲醇反应。重点考察了铜的负载量对催化剂性能的影响,并对其物化性能和催化性能之间的关系进行了讨论。结果发现,随着铜负载量的增加,催化剂中金属铜的比表面先增加后减小,当铜的负载量为10%（质量百分数）时达到最大值。催化剂的表面碱性位数量随铜含量的增加持续减小,中等碱位和强碱位的强度下降。当铜的负载量不高于10%时,CO₂的转化率与铜的比表面积呈线性关系。甲醇选择性与催化剂的表面碱位性质有关,过强的碱性位会降低甲醇选择性。     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Monolayer oxide catalysts from alkoxide precursors, part IV. Vanadia, titania and stibia on SiO2, SnO2, and TiO2 in 2-propanol oxidation

Vanadia monolayer catalysts supported on SnO₂, ZrO₂, TiO₂, and SiO₂, similarly as titania and stibia monolayers deposited on SiO₂, have been synthesized by reacting the corresponding metal alkoxides with hydroxyls on the carrier surfaces. The metal ions loads in monolayer systems were determined. The catalysts activity was tested in 2-propanol transformations. The nature of carrier has a strong influence on the dehydrating to dehydrogenating activity ratio of vanadia monolayer.