生物降解聚酯包埋利福平缓释微球的制备及释放行为

以生物可降解乙交酯和丙交酯的无规共聚物(PLGA)为载体,将抗结核病药利福平溶解于PLGA的有机溶液中,采用通常乳化-溶剂挥发方法制备了药物缓释微球.研究了影响微球制备的工艺条件.用电子显微镜观察了微球及降解后的表面形态,测定了微球粒径及载药量,评价了载药微球的体外释放行为.结果表明,以质量分数为1%的明胶为稳定剂,制备的微球形态完整,粒径范围为10～30μm,微球中利福平的平均质量分数为24.3%.体外释药时间可以通过高分子的降解速率来调控,本实验的释药时间可以在42～84d之间调控,药物缓释达到了理想的零级动力学释放.因此,利福平PLGA微球具有显著的长效、恒量药物缓释作用.     

可降解聚乙交酯-丙交酯缓释微球用于甲状旁腺相关肽的持续释放

采用水包油包水(W1/O/W2)复乳溶剂挥发法制备了包载甲状旁腺激素相关肽(PTHrP)的聚乙交酯-丙交酯(PLGA)微球,通过核磁,红外,GPC,扫描电子显微镜等观察PLGA载药微球的结构,表明载药微球具有良好的球形结构,其平均粒径约为8μm.而体外模拟释放表明,此PLGA载药微球能实现PTHrP1-34长达25天的持续释放.并通过MTT法、碱性磷酸酶活性测定等检测负载PTHrP1-34的PLGA微球缓释系统对小鼠成骨细胞MC3T3-E1增殖及分化的影响,结果表明PTHrP1-34浓度为1×10-9mol/L时对MC3T3-E1增殖促进效应最大,且随着药物作用时间的延长,缓释系统促进细胞增殖、分化的作用越明显.     

循环应力下PLGA多孔支架对地塞米松的控制释放

摘要 采用喷雾干燥法制备包载地塞米松(Dex)的聚L-丙交酯-b-聚乙二醇(PLLA-PEG)微球, 以热致相分离/粒子洗去法制备聚乙交酯-co-丙交酯(PLGA)多孔支架, 通过复合溶结法将载药微球固定于PLGA多孔支架中, 制得载药微球-支架(记为MS-S). 另外, 在支架制备过程中将Dex直接加入PLGA溶液中, 制得对比的直接载药支架(记为D-S). 以扫描电镜观察微球和支架的微观形貌, 在循环压应力与水浴摇床两种环境下分别对上述两种载药支架进行控制释放Dex的实验, 用紫外-可见光分光光度计测定Dex的累积释放量. 结果表明, Dex及微球的载入对PLGA支架的整体形貌影响较小; 循环压应力显著提高了Dex从载药支架中的释放速率, 与D-S相比, MS-S延缓了药物的释放. 研究模拟体内循环压应力下支架控制释放药物规律对于实现理想的临床效果具有重要意义.     

聚L-谷氨酸担载胰岛素口服微球的制备与评价

以聚L-谷氨酸为载体材料, 采用无水乳液法制备了口服胰岛素微球, 微球直径在5~20 μm, 载药质量分数为5%~9%. 载药微球具有良好的pH敏感释放行为, 在胃模拟液中2 h释放量约为5%, 在肠道模拟液中2 h释放90%以上. 考察聚合物分子量、溶液浓度、理论投药量及混合材料对微球释放行为的影响.     

聚羟基丁酸酯缓释微球的制备与性能

用溶剂蒸发法制备了以新型生物可降解材料聚羟基丁酸酯为载体、以安定为模药的缓释微球,讨论了药物与载体之比对药物含量与包封率的影响,以及制备微球条件对药物释放性能的影响;微球平均粒径为30～40 μm,粒径分布在 1～1.5之间,最大载药量为19.51%;最高包封率为67.11%;体外累积释放曲线呈"两相"释放特征并拌随初始的"突释效应".扫描电镜观察微球表面呈皱缩表观形态结构,微球内部横断面具有孔道与孔洞,在4℃与室温(20～25 ℃)条件下密封,避光环境下性质稳定.     

聚羟基丁酯酯缓释微球的制备及性能

用溶剂蒸发法制备了以新型生物可降解材料聚羟基丁酸酯为载体、以安定为模药的缓释微球,讨论了药物与载体之比对药物含量与包封率的影响,以及制备微球条件对药物释放性能的影响;微球平均粒径为３０～４０μｍ,粒径分布在１～１．５之间,最大载药量为１９．５１％;最高包封率为６７．１１％;体外累积释放曲线呈“两相”释放特征并拌随初始的“突释效应”。扫描电镜观察微球表面呈皱缩表观形态结构,微球内部横断面具有孔道与孔     

可降解聚合物包覆次血红素六肽微球的制备及生物活性

采用水包油包水(W₁/O/W₂)复乳溶剂挥发法制备了包覆次血红素六肽(DhHP-6)的2种聚酯微球. 通过扫描电子显微镜、 体外缓释行为、 高效液相(HPLC)检测、 酶活力测定和初步的动物实验等表征, 综合评价了载药微球的体外释放及体内生物活性. 实验结果表明, 载药微球球体圆整, 粒径分布均匀, 载药量高, 能够实现体外缓释, 并对细胞过氧化损伤和小鼠脑缺血损伤均有一定的保护作用.     

壳交联pH响应型PLGA载药微球的制备与研究

首先采用一次乳化法制备出PLGA[聚(乳酸-羟基乙酸)]纳米微球,并通过静电吸附将阳离子聚合物壳聚糖修饰到PLGA微球表面,然后以香草醛为交联剂对壳聚糖进行化学交联,得到一种壳交联的p H响应型纳米微球(PCV),微球粒径为(277.60±38.01)nm,表面电位为(21.60±4.51)m V.微球稳定性评价结果显示微球在24 h内粒径变化较小;流式细胞仪检测显示细胞对PCV微球的摄取量比未经修饰的PLGA微球的摄取量高;空白微球细胞毒性实验表明在空白微球浓度小于80μg/m L时细胞的存活率达93.24%.以多西他赛(DTX)为模型药物进行包载,该纳米微球DTX的载药率为7.48%,包封率为34.98%;体外药物释放实验显示,该微球在p H=5.0环境下孵育90 h的药物积累释放率达58.66%,而在p H=7.4的环境下的药物积累释放率为50.63%;此外,载DTX微球毒性试验结果表明该载药微球对A549肺癌细胞有较强的杀伤作用,其IC50值可达0.0009μg/m L.     

聚蔗糖微球缓释载体的研制

药物输送系统(drug delivery system,DDS)主要包括药物和载体两部分,微球(microspheres)是以适宜的高分子材料制成的一种应用较为广泛的新型药物载体。本文研究了聚蔗糖微球的制备方法以及作为药物缓释载体的可行性。以Span-80为表面活性剂,环氧氯丙烷为交联剂,Ficoll-400水溶液为水相(W),氯苯为油相(O),采用反相悬浮聚合法制备了一系列粒径<100μm、圆球率高的聚蔗糖微球。以牛血清蛋白(BSA)为模型药物,研究其作为药物载体的缓释性能。释放实验表明其最大释放率为95%,适当提高其交联程度有利于BSA的缓慢释放。     

聚[碳酸(亚丁酯-co-ε-己内酯)酯]的制备及其载药微球性能的研究

采用阴离子配位聚合方法, 合成了二氧化碳、1,2-环氧丁烷与ε-己内酯的三元共聚物: 聚[碳酸(亚丁酯-co-ε-己内酯)酯](PBCL). 并采用复相乳液(W/O/W)溶剂挥发法制备了包裹抗菌药物甲磺酸帕珠沙星的可降解微球. 对聚合物进行了FTIR, ¹H NMR, ¹³C NMR, DSC, TGA和WAXD等表征, 以及降解性能和载药微球特性的研究. 结果表明, PBCL热稳定性及降解性能优于聚碳酸亚丁酯(PBC). 所得PBCL微球球形规整、表面光滑. 大部分微球粒径在0.5～1 μm的范围内, 载药量和包封率分别达到38.21%和87.9%. 微球的体外释药性能研究在pH 7.4的磷酸缓冲溶液中进行, 释放21 d后, PBCL微球的累积释药量为84.74%, PBC微球的释药量仅为17.29%. 药物的体外释放行为符合Higuchi方程. PBCL载药微球具有长效缓释作用.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.