Resonance Waves in a Model of a Two‐Layered Liquid

With allowance for surface interaction between phases, the behavior of longwave perturbations at the interface between two layers of dissimilar liquids, which form resonance triplets described by a pseudodifferential equation, is studied.     

Model of Self‐Organization of an Ensemble of Cracks Radiating Sound

A model of selforganization of cracks arising in a rock specimen (granite) compressed by a press is proposed. The model is based on the assumption of acoustic wave interaction between the cracks. To construct the model of selforganization of cracks, solutions of the Fokker–Planck equation are used. The experimentally observed spontaneous increase in the activity of acoustic emission, spatial and temporal clusterization, and formation of a fractal structure in rock specimens under constant and slowly varying loads are explained.     

A Method for Determining Model‐Structure Errors and for Locating Damage in Vibrating Systems

A method is proposed for the determination of natural frequencies and mode shapes of a system which is constrained so that unknown stiffnesses are replaced by rigid connections. The constraint is not imposed physically but only in mathematics so that the behaviour of the constrained system is inferred from the unconstrained measurements. Since stiffnesses which are made rigid cannot experience any elastic strain they can have no effect on the inferred measurements. A procedure for comparing the inferred measurements with similarly constrained finite element predictions can be used to determine modelstructure errors. Damage, such as a crack in a beam, can be located by comparing the inferred measurements from the structure in its undamaged and current states. It is demonstrated how unmeasured rotations may be constrained by using rigidbody modes and a reduction/expansion transformation from a finite element model.Sommario. Viene proposto un metodo per la determinazione delle frequenze proprie e dei modi di vibrazione di un sistema vincolato in modo tale che alcuni elementi elastici siano sostituiti da collegamenti rigidi. Il vincolo non viene imposto fisicamente, ma solo matematicamente, e pertanto il comportamento del sistema vincolato viene dedotto dalle misure sul sistema non vincolato. Poiché gli elementi che sono resi rigidi non possono subire alcuna deformazione elastica, essi non hanno certamente alcun effetto sulle misure dedotte per il sistema vincolato. Una procedura che mette a confronto le misure dedotte per il sistema vincolato con le previsioni fornite da un modello ad elementi finiti con analoghi vincoli, può essere utilizzata per determinare errori nella struttura del modello. Danni del tipo di una cricca su una trave possono essere localizzati confrontando le misure dedotte – per sistemi analogamente vincolati – da quelle effettuate sulla struttura non danneggiata e sulla struttura danneggiata. Si dimostra come si possono imporre vincoli sulle rotazioni (non misurate) utilizzando i modi di corpo rigido dell'elemento e una tecnica di riduzione/espansione dei gradi di libertà di un modello ad elementi finiti.     

Experimental and Numerical Study of a Hypersonic Separated Flow in the Vicinity of a Cone‐Flare Model

An axisymmetric laminar separated flow in the vicinity of a coneflare model is studied experimentally and numerically for a Mach number M = 6. The distributions of pressure and Stanton numbers along the model surface and velocity profiles in the region of shock wave–boundary layer interaction are measured and compared with the calculated data. The influence of the laminar–turbulent transition on flow parameters is studied numerically.     

Dust‐ion‐acoustic precursor of a shock wave

The effect of charged dust particles on the structure of the plasma precursor of a strong shock wave is studied. The conditions of formation of a weak discontinuity front are obtained. It is shown that resonant modes can occur in which the concentration of dust particles in the neighborhood of the front increases. In the case of positively charged particles of dust, the formation of a localized compaction region in the form of a soliton bunch is possible and the dependence of the amplitude of the soliton on shockwave velocity is nonmonotonic. In the case of negatively charged particles of dust, a rarefaction wave is formed. The indicated phenomena can substantially affect the concentration of the neutral component in a slightly ionized plasma.     

On the Propagation of Long‐Wave Perturbations in a Two‐Layer Free‐Boundary Rotational Fluid

A mathematical model for the propagation of longwave perturbations in a freeboundary shear flow of an ideal stratified twolayer fluid is considered. The characteristic equation defining the velocity of perturbation propagation in the fluid is obtained and studied. The necessary hyperbolicity conditions for the equations of motion are formulated for flows with a monotonic velocity profile over depth, and the characteristic form of the system is calculated. It is shown that the problem of deriving the sufficient hyperbolicity conditions is equivalent to solving a system of singular integral equations. The limiting cases of weak and strong stratification are studied. For these models, the necessary and sufficient hyperbolicity conditions are formulated, and the equations of motion are reduced to the Riemann integral invariants conserved along the characteristics.     

Re‐Entering of Bodies with a Positive Lift‐to‐Drag Ratio into the Earth's Atmosphere

The problem of gliding descent of a smooth blunted body with a positive lifttodrag ratio in the Earth's atmosphere is solved within the framework of the parabolized viscous shock layer model.     

Dispersion of Dynamically Passive Impurities in Non‐One‐Dimensional Liquid Flow

Equations that describe dispersion of a substance in a nononedimensional incompressible liquid flow through a plane channel are derived. The model under consideration extends the traditional Taylor model to the case where sources of the substance are present in the flow and relaxation transfer processes are taken into account. Additional conditions for the dispersion equations are obtained. The relation between the proposed model and the Taylor model is analyzed. Based on the equations obtained, the mass transfer between circulation regions in the flow is calculated and a system of cellularmodel equations for stagnant cavities is constructed.     

High‐Velocity Penetration of Plane Shaped‐Charge Jets into Nonlinear Media

This paper reports results of metallographic analysis of metal samples cut from targets penetrated by plane shapedcharge jets. It is shown that the plastic deformation due to penetration has a turbulent nature and, in some cases, it occurs in metals with fractal structure formed after passage of the shock wave running ahead of the jet. A penetration model is proposed that takes into account the nonlinear behavior of the target material and the fractality of its structure.     

Electrical Characteristics of Three‐Component Dielectric Composites with Close‐Packed Inclusions

The electric field and effective permittivity are calculated for a twodimensional threecomponent dielectric material reinforced by cylindrical fibers. A composite material with a square close packing of inclusions is considered. The field in the periodic system is investigated using the exact solution of the model problem of interaction of two dissimilar cylindrical inclusions in an external homogeneous electric field. A diagram of the relative effective permittivity is constructed.     

Increasing pressure difference via a gas‐dynamic window for electron‐beam extraction

The functioning of a gasdynamic window designed as an evacuation chamber with orifices 1 mm in diameter for electronbeam extraction from vacuum (10 Pa) into the atmosphere is analyzed. An increase pressure difference is attained due to the ejecting effect arising when the gas flows over an element of the gasdynamic window with pressure taps in the wall. A method for calculating the area of the pressure taps is presented.     

Calculation of Transport‐Equation Eigenvalues

The eigenvalue problem for the transport equation with variable coefficients in an arbitrary domain with a smooth boundary is considered. A saturationfree numerical algorithm is constructed. Examples of numerical calculations are given, which prove the effectiveness of the proposed procedure.     

Exact solutions and mathematical properties of boundary‐value problems for dynamic‐diffusion boundary layers

The paper studies boundaryvalue problems for dynamicdiffusion boundary layers occurring near a vertical wall at high Schmidt numbers and for dynamic boundary layers whose inner edge is adjacent to the dynamicdiffusion layers. Exact solutions for boundary layers at small and large times are derived. The wellposedness of the boundaryvalue problem for a steady dynamicdiffusion layer is studied.     

Heat‐and mass‐transfer characteristics in a spatial subsonic flow around a blunt body

A study was performed of methods for controlling thermal regimes in a spatial supersonic flow around a blunt body with the simultaneous use of gas injection from the surface of the porous bluntness and heat flow in the shell material. The effect of the nonisothermicity of the shell wall on the heat and masstransfer characteristics in the boundary layer was taken into account by solution of the problem in a conjugate formulation. It is shown that heat conducting materials can be used to advantage to reduce the maximum temperatures in the screen zone.     

基于Model 1221的小型加速度测量系统

采用微机械传感器Model1221,通过扩展外部储存器SD卡,设计并制作了由2块直径2.3cm的电路板构成、基于LPC2132微处理器的小型加速度测量系统,并结合该系统的RS232在PC机上设计了对测量数据读取、存储和去噪的分析处理软件。为了准确掌握系统静态和动态性能,分别开展了向心加速度静态标定和冲击加速度动态对比测试,结果表明该系统在测量范围((-50～50)g)和频响范围(0～2kHz)内性能较好,同时可进行长时间存储,具有一定的应用前景。     

The Simply Laminated Microstructure in Martensitic Crystals that Undergo a Cubic‐to‐Orthorhombic Phase Transformation

. We study simply laminated microstructures of a martensitic crystal capable of undergoing a cubic‐to‐orthorhombic transformation of type ${\mathcal P}^{(432)} \to {\mathcal P}^{(222)'}We study simply laminated microstructures of a martensitic crystal capable of undergoing a cubic-to-orthorhombic transformation of type P⁽⁴³²⁾ ? P^(222)￠{\mathcal P}^{(432)} \to {\mathcal P}^{(222)'}. The free energy density modeling such a crystal is minimized on six energy wells that are pairwise rank-one connected. We consider the energy minimization problem with Dirichlet boundary data compatible with an arbitrary but fixed simple laminate. We first show that for all but a few isolated values of transformation strains, this problem has a unique Young measure solution solely characterized by the boundary data that represents the simply laminated microstructure. We then present a theory of stability for such a microstructure, and apply it to the conforming finite element approximation to obtain the corresponding error estimates for the finite element energy minimizers.