Catalytic Hydrosilylation of Substituted Acetophenones by 1,1,3,3-Tetrametyldisiloxane with Complexes Rhodium (I) and Platinum (II)

The hydrosilylation of a range of para-substituted acetophenones XC₆H₄COCH₃ (X = H, Me, MeO, F, Cl, NO₂) with 1,1,3,3-tetramethyl disiloxane mediated by complexes of rhodium (I) and platinum (II) was investigated. The complexes of platinum (II) are less effective than complexes of rhodium (I), but display greater selectivity. Six 1-(1′-arylethoxy)-1,1,3,3-tetramethyl disiloxanes have been synthesized by hydrosilylation using several coupling catalysts.     

C60正丙胺铂,铑配合物的合成及其催化硅氢化性能

Ｃ６０与正丙胺反应,然后分别与氯亚铂酸钾或三氯化铑配合,制得出含配位氮原子的富勒烯铂,铑 配合物,它们均能有效地催化烯烃与三乙氧基硅烷硅氢加成,铂配合物还对苯乙烯有独特的催化性能,以近１００％的区域选择性得到α－加成产物,对催化机理进行了初步的探讨。     

二氧化硅-聚硅氧烷负载硫杂-15-冠-5铂、铑配合物的合成及其催化硅氧化性能

6－(ω'-十一碳烯氧甲基)-1-硫杂-4,7,1O,13-四氧杂环十五烷与三乙氧基硅烷进行硅氢加成,产物依次以气相法二氧化硅固载、氯亚铂酸钾或三氯化铑络合,合成了相应的二氧化硅-聚硅氧烷负载硫杂-15-冠-5-铂、铑配合物,并研究了它们在烯烃与三乙氧基硅烷的硅氢加成反应中的催化性能.结果表明,二者均为硅氢加成反应的高效催化剂.     

Hydrosilylation of alkenes catalysed by rhodium complexes immobilized on silica via a pyridine group

2-(2-Trimethoxysilylethyl)pyridine, together with 3-methcryloxypropyltrimethoxysilane, was used to prepare a series of rhodium carbonyl complexes bound to silica via a pyridine group. The rhodium complex Rh₂(CO)₄Cl₂ (Rh₂) was used as the starting compound, and the immobilized complexes were prepared by four different routes which yielded both surface-bonded complexes and complexes bonded within the silicate matrix. These complexes were efficient catalysts of hydrosilylation of octene by triethxysilane. All the immobilized complexes were more than their homogeneous analogues and some could be re-used.     

Catalysis of hydrosilylation XIII. Gas-phase hydrosilylation of acetylene by trichlorosilane on functionalised silica supported rhodium and ruthenium phosphine complexes

Gas-phase hydrosilylation of acetylene by tri-chlorosilane catalyzed in a continuous flow apparatus by rhodium and ruthenium phosphine complexes immobilized on the silica via mercapto, phosphine, amine and nitrile ligands has been studied. GLC analysis of the reaction products showed vinyltrichlorosilane to be accompanied by products of double hydrosilylation of acetylene and the redistribution of trichlorosilane followed by the hydrosilylation and hydrogenative hydrosilylation of acetylene with dichlorosilane. A scheme for this complex competitive–consecutive reaction was proposed. The yield and selectivity of vinyltrichlorosilane can be much improved under special reaction conditions, e.g. rate flow of the particular substrates, temperature, given catalyst and others. Kinetic measurements carried out in the range of 115–140°C allowed us to evaluate the activation energy, E_a, for the vinyltrichlorosilane synthesis, which varied between 20.5 and 27.6 kJ mol^?1 for the selected rhodium and ruthenium supported complexes.     

Bridge functionalized bis-N-heterocyclic carbene rhodium(I) complexes and their application in catalytic hydrosilylation

A series of chelating bridge functionalized bis-N-heterocyclic carbenes (NHC) complexes of rhodium (I) were prepared by reacting the corresponding imidazolium salts with [Rh(COD)Cl]₂ in an in-situ reaction. For the N-methyl substituted complex with a PF₆-anion an X-ray crystal structure was exemplary obtained. All complexes were spectroscopically characterized and tested for the hydrosilylation of acetophenone.     

Catalysis of hydrosilylation by well-defined rhodium siloxide complexes immobilized on silica

Rhodium surface siloxide complexes were prepared directly by condensation of the molecular precursors ([{Rh(μ-OSiMe₃)(cod)}₂], [{Rh(μ-OSiMe₃)(tfb)}₂], [{Rh(μ-OSiMe₃)(nbd)}₂]) with silanol groups on silica surface (Aerosil 200 and SBA-15) and their structures were characterized by ¹³C and ²⁹Si CP/MAS NMR spectroscopy. Such single-site complexes were tested for their activity in hydrosilylation of carbon–carbon double bonds with triethoxysilane, heptamethyltrisiloxane and poly(hydro,methyl)(dimethyl)siloxane. The best catalyst appeared to be cyclooctadiene ligand-containing rhodium siloxide complex immobilized on Aerosil which was recycled as many as 20 times without loss of activity and selectivity in hydrosilylation of vinylheptamethyltrisiloxane with heptamethyltrisiloxane. On the ground of CP/MAS NMR measurements it was established that the mechanism of hydrosilylation catalyzed by silica-supported rhodium siloxide complexes is different from that for the complexes in the homogeneous system.     

Synthesis of rhodium N-heterocyclic carbene complexes and their catalytic activity in the hydrosilylation of alkenes in ionic liquid medium

Rhodium complexes bearing N-heterocyclic carbene (NHC) ligands were prepared from bis(η⁴-1,5-cyclooctadiene) dichlorodirhodium and 1-alkyl-3-methylimidazolium-2-carboxylate, and the catalytic properties of rhodium complexes prepared in the hydrosilylation of alkenes in ionic liquid media were investigated. It was found that both the catalytic activity and selectivity of the rhodium complexes bearing NHC ligands were influenced by the attached substituents of the imidazolium cation. Additionally, rhodium complexes bearing NHC ligands in ionic liquid BMimPF₆ could be reused without noticeable loss of catalytic activity and selectivity.     

Chemical assembling of silica surface using a reaction of catalytic hydrosilylation

Chemical assembling of the silica surface modified by dimethylchlorosilane was performed by the catalytic hydrosilylation of 1,3-divinyl-1,1,3,3-tetramethyldisiloxane, α-methyl styrene, acetophenone, allyl butyl and allyl glycidyl ethers with dimethylchlorosilane. The effect of the nature of complexes of platinum, palladium, rhodium and ruthenium on the parameters of hydrosilylation was studied. It was shown that the maximum rate of hydrosilylation was observed in the reaction with allyl glycidyl ether, and minimum, with α-methylstyrene; the most effective catalyst of hydrosilylation was [Rh(CO)₂(acac)].     

Hydrosilylation and double silylation of carbonyl compounds with 1,1′-bis(dimethylsilyl)ferrocene using nickel- and platinum-catalysts

A series of ferrocene-based organosilicon compounds have been prepared via hydrosilylation or double silylation of carbonyl compounds with 1,1′-bis(dimethylsilyl)ferrocene using (C₂H₄)Pt(PPh₃)₂ or Ni(PEt₃)₄ catalysts. In general, while the platinum catalyst (C₂H₄)Pt(PPh₃)₂ preferentially produced cyclic double-silylated products, the Ni(PEt₃)₄ catalyst led to the hydrosilylated ferrocene products from aldehydes or ketones.     

Modification of (Poly)Siloxanes via Hydrosilylation Catalyzed by Rhodium Complex in Ionic Liquids

Summary. The hydrosilylation of 1-heptene, allyl glycidyl ether and, allyl polyether by heptamethylhydrotrisiloxane and poly(hydro, methyl)(dimethyl)siloxane catalyzed by rhodium(I) complexes (particularly [{Rh(μ–OSiMe₃)(cod)}₂]) in imidazolium ionic liquids (especially [TriMIM]MeSO₄) gives heptyl and glycidyloxy functional (poly)siloxanes and silicone polyethers with high yield and selectivity. The catalytic system based on rhodium siloxide can be easily separated from the product and successfully reused up to five times.     

Synthesis and characterization of chiral mono N-heterocyclic carbene-substituted rhodium complexes and their catalytic properties in hydrosilylation reactions

Different chiral mono-substituted N-heterocyclic carbene complexes of rhodium were prepared, starting from [Rh(COD)Cl]₂ (COD = cyclooctadiene) by addition of free N-heterocyclic carbenes (NHC), or an in-situ deprotonation of the corresponding iminium salt. All new complexes were characterized by spectroscopy methods. In addition, the structures of chloro(η⁴-1,5-cyclooctadiene)(1,3-di-[(1R,2R,3R,5S)-2,6,6-trimethylbicyclo[3.1.1]hept-3-yl] imidazolin-2-ylidene)rhodium(I) (5a), chloro(η⁴-1,5-cyclooctadiene)(1,3-di-[(1R,2S,5R)-2-isopropyl-5-menthylcyclohex-1-yl]imidazol-2-ylidene)rhodium(I) (5b) and chloro(η⁴-1,5-cyclooctadiene)(1,3-di-[(2R,4S,5S)-2-methyl-4-phenyl-1,3-dioxacyclohex-5-yl]imidazolin-2-ylidene)rhodium(I) (5i) were analyzed by DFT-calculations. The enantioselective hydrosilylation of acetophenone, ethylpyruvate and n-propylpyruvate with diphenylsilane and hydrolysis was carried out with chiral C₂-symmetrical mono-substituted N-heterocyclic carbene rhodium complexes giving for the first time an enantioselective excess of up to 74% ee in the case of the n-propylpyruvate.     

Polyamide-bound metal complex catalysts: Synthesis,characterization and catalytic properties

A series of polyamides having different numbers of methylene groups in their repeating units have been synthesized by interfacial polycondensation of terephthaloyl chloride with piperazine and aliphatic diamines H₂N(CH₂)_nNH₂ (n = 2, 6, 10). These materials, which have high thermal stability, were used for immobilization of rhodium and platinum complexes. Chloroplatinic acid and the compounds PtCl₂(CH₃CN)₂ and [RhCl(CO)₂]₂ were used as precursors of the supported catalysts. Low molecular weight analogues of the polyamides were prepared for a study of the coordination mode between the metal ion and the polymer by IR spectroscopy. The results suggest that the carbonyl oxygen of the polyamide is the site of coordination to both rhodium and platinum. The bound catalysts exhibited high activity in hydrosilylation of hexene-1. The activities of the rhodium complexes were found to be dependent on the structure of the polyamide support, decreasing with increasing distance between the amide groups, and closely paralled the changes in the degree of crystallinity of the polymers. Repeated use of the polymers bearing rhodium complexes showed that the bond between the metal and polyamide is fairly stable.     

Preparation of C60–Silica Hybrid Monolith by Sol-Gel Process

A C₆₀–silica hybrid monolith was prepared by the hydrosilylation of C₆₀ in the presence of platinum catalyst followed by sol-gel process with tetraethoxysilane. The hydrosilylation with trichlorosilane, triethoxysilane, chlorodiphenylsilane, and dichlorophenylsilane gave silylated C₆₀s as a brown pasty liquid. The formula was estimated to be C₆₀{Si(OEt)₃}_2.6H_2.6 or C₆₀(SiPh₂Cl)_3.2H_3.2 based on the proton nuclear magnetic resonance spectrum. A C₆₀–silica hybrid gel monolith was obtained by sol-gel process of the silylates and tetraethoxysilane in ethanol followed by aging for 3 weeks at room temperature. The monolith was brown and transparent with a diameter of 25 mm. On the other hand, the sol-gel reaction of tetraethoxysilane, trimethoxyphenylsilane, and C₆₀ provided a heterogeneous gel with a phase separation of C₆₀.     

Fast atom bombardment mass spectrometry of non-volatile organometallic compounds. Rhodium,iridium and platinum complexes containing a cumulene ligand

Fast atom bombardment (FAB) mass spectrometry has been used to examine a series of rhodium, iridium and platinum organimetallic complexes, in which a cumulene ligand is attached to the metal in either σ-or π-bonding fashion. The most intense ion formed in the rhodium and platinum series is the metal-bis(triphenylphosphine) ion, while the [Ir(P(C₆H₅)₃)₂CO]⁺ ion is most intense for the iridium series. The platinum complexes show the most intense molecular ion peaks (up to 35% relative intensity), while the rhodium complexes show the least intense molecular ion peaks. The primary fragmentations of all these complexes occur at the metal-ligand bonds. The cumulenic ligand is lost as an impact unit in all cases. The FAB mass spectra of Rh(P(C₆H₅)₃)₃Cl (Wilkinson's catalyst), Ir(P(C₆H₅)₃)₂COCl (Vaska's compound), Rh(P(C₆H₅)₃)₂COCl and Pt(P(C₆H₅)₃)₂(C₂H₄)–synthetic precursors or related compounds to the organometallic complexes examined here–are included for comparison.     

Cationic rhodium(I)–diolefin complexes containing an optically active C2-symmetric bis(sulfoximine) ligand: Synthesis and catalytic activity

A series of cationic rhodium(I) complexes [Rh(diene)(N^N)][BF₄] (diene = 1,5-cyclooctadiene (cod), norbornadiene (nbd), tetrafluorobenzobarralene (tfb)), containing the optically pure bis(sulfoximine) ligand 1,2-bis(S-methyl-S-phenylsulfonimidoyl)benzene, have been synthesized and fully characterized. The structure of the R,R enantiomer of the ligand, and that of its cyclooctadiene–Rh(I) complex, were confirmed by means of single-crystal X-ray diffraction techniques. Studies on the catalytic activity of these complexes in acetophenone hydrosilylation and dimethyl itaconate hydrogenation are also reported.     

A NEW TYPE OF CROWN FUNCTIONALIZED POLYSILOXANE AND ITS PLATINUM COMPLEX

A new type of crown functionalized polysiloxane, in which the crown moieties were incorporated into main chain, and its platinum complex were synthesized. The polysiloxane was synthesized from 3, 16-dihydroxy-1- thia - 5, 8, 11, 14- tetraoxacycloheptadecane via etheritication with ω-chloroundecene, followed by hydrosilylation with triethoxysilane, cohydrolysis with D_4, sequentially. Treating the polysiloxane with potassium cholroplatinite, the title complex was obtained. It was found that the platinum complex exhibited high catalytic activity in the hydrosilylation of olefins with triethoxysilane.     

Electrochemical oxidation and reduction of rhodium and iridium complexes with fullerenes C60 and C70

The electrochemical behavior of rhodium and iridium complexes with fullerences C₆₀ and C₇₀ was studied by cyclic voltammetry in a THF—toluene mixture. The complexes were found to be capable of oxidation and reduction. It was demonstrated that thein situ generation of metallofullerene complexes in the electrochemical cell by the interaction of C₆₀ and C₇₀ with hydridocarbonylphosphine complexes of rhodium and iridium, HM(CO)(PPh₃)₃, is possible. The influence of structural factors and the action of CO₂ on changes in the redox properties of fullerene complexes was considered.     

The classification of trigonal bipyramidal platinum(II), rhodium(I) and iridium(I) olefin complexes

It is shown that trigonal bipyramidal platinum(II), rhodium(I) and iridium(I) olefin complexes are better classified with the platinum(O) complex [Pt(PPh₃)₂(C₂H₄)] as class T olefin complexes than with the square-planar platinum(II) complexes such as [Pt(C₂H₄)Cl₃]^- which fall in class S. The underlying reasons for this are considered to be electronic rather than steric as was previously suggested.     

Hydrosilylation reactions of hydrosilatrane and 2-methyl-6-ethyl-1,3-dioxa-6-aza-2-silacyclooctane

Conclusions 1-Hydrosilatrane does not react with monosubstituted ethylenes (or acetylenes) either in the presence of platinum or rhodium complexes or upon initiation of the reactions using organic peroxides, UV irradiation, or thermal methods. By contrast, 2-methyl-6-ethyl-1,3-dioxa-6-aza-2-silacyclooctane readily takes part in hydrosilylation of the indicated unsaturated compounds when Rhacac (CO)₂ is present.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khirnicheskaya, No. 4, pp. 899–901, April, 1986.