Quasi-distributed fiber Bragg grating sensor system based on a Fourier domain mode locking fiber laser

A novel quasi-distributed fiber Bragg grating (FBG) sensor system based on Fourier domain mode locking (FDML) fiber laser is proposed and demonstrated. The low reflectivity FBGs with the same Bragg wavelength are connected cascaded in a long fiber working as the sensing elements of the sensor system as well as the wavelength and cavity length selecting elements of the FDML laser. By adjusting the driving frequency of the FDML fiber laser, lasing with different selected cavity lengths will be achieved correspondingly. When the wavelength of the working FBG shifts which includes the sensing information, FBG interrogation can be realized both in wavelength and time domain.     

Multiple fiber Bragg grating interrogation based on a spectrum-limited Fourier domain mode-locking fiber laser

A novel fiber Bragg grating (FBG) sensing system based on a spectrum-limited Fourier domain mode-locking (SL-FDML) fiber laser is proposed. Multiple FBGs cascaded in a long fiber are utilized as both the sensors in the system and the wavelength-selected components in the SL-FDML fiber laser. Both wavelength-division multiplexing and spatial-division multiplexing techniques are demonstrated for interrogation of multiple FBGs by mapping the wavelength measurement to the time measurement and by adjusting the driving frequency of the SL-FDML fiber laser. The proposed FBG sensing system, employing techniques of the wavelength- and spatial-domain interrogation of multiple FBGs, can be used in remote and quasi-distributed multipoint sensing.     

Long-distance fiber Bragg grating sensor system with a high optical signal-to-noise ratio based on a tunable fiber ring laser configuration

A novel tunable fiber ring laser configuration with a combination of bidirectional Raman amplification and dual erbium-doped fiber (EDF) amplification is proposed for realizing high optical signal-to-noise ratio (SNR), long-distance, quasi-distributed fiber Bragg grating (FBG) sensing systems with large capacities and low cost. The hybrid Raman-EDF amplification configuration arranged in the ring laser can enhance the optical SNR of FBG sensor signals significantly owing to the good combination of the high gain of the erbium-doped fiber amplifier (EDFA) and the low noise of the Raman amplification. Such a sensing system can support a large number of FBG sensors because of the use of a tunable fiber Fabry-Perot filter located within the ring laser and spatial division multiplexing for expansion of sensor channels. Experimental results show that an excellent optical SNR of approximately 60 dB has been achieved for a 50 km transmission distance with a low Raman pump power of approximately 170 mW at a wavelength of 1455 nm and a low EDFA pump power of approximately 40 mW at a wavelength of 980 nm, which is the highest optical SNR achieved so far for a 50 km long FBG sensor system, to our knowledge.     

基于线型腔掺铒光纤激光器的光纤光栅传感实验研究

提出了一种基于线型腔掺铒光纤激光器的光纤布拉格光栅传感解调系统,并进行了理论分析和实验验证。此传感系统具有稳定性好、信噪比高、结构简单等特点。实验结果表明:在常温下光纤光栅传感解调系统能很好的实现光纤光栅传感信号的传感和检测;15m掺铒光纤用作增益介质可以产生较大信噪比的稳定激光输出,系统在4nm范围内的解调精度为0.04nm。     

Dynamic strain measurement using two wavelength-matched fiber Bragg grating sensors interrogated by a cascaded long-period fiber grating

In this work, we describe a fiber Bragg grating (FBG) sensing system using two wavelength-matched FBG sensors for static and dynamic strain measurement. A cascaded long-period fiber grating (CLPG)-based demodulation technique has been used to interrogate the two wavelength-matched FBG sensors. Experimental results of static strain measurement show that the proposed system has a strain resolution of 1 με. This system has also been used for dynamic strain measurement. An eddy current displacement meter-based system has been used as a comparison measurement. Experimental results of dynamic strain measurement have proved that the FBG sensing system has a good performance in the measurement of dynamic strain. The results of static and dynamic strain measurement indicate that the sensing system using two wavelength-matched FBG sensors is superior to the single FBG sensor system.     

Development of an optical fiber hydrophone with fiber Bragg grating

A new type of optical fiber hydrophone is constructed with a fiber Bragg grating (FBG) based on the intensity modulation of laser light in an FBG under the influence of sound pressure. The FBG hydrophone shows linearity, with dynamic range about 70 dB. It can measure amplitude and phase of an acoustic field in real time, and operates in a wide range of acoustic frequency, at least from 1 kHz to 3 MHz. No signal distortion is observed in the detected signal. Because of the simplicity in its operating principle and geometry, an FBG hydrophone is expected to be an acoustic sensor of high practicality compared to a conventional optical fiber hydrophone.     

Numerical analysis and characterization of fiber Bragg grating-based Q-switched ytterbium-doped double-clad fiber lasers

A numerical model of the fiber Bragg grating (FBG)-based actively Q-switched double-clad fiber laser is presented in this paper. Based on numerical simulations, the influence of FBG on Q-switched pulse performance of Yb³⁺-doped double-clad fiber laser is studied, the pulse characteristics are discussed and analyzed using different FBG profiles, and further investigation is conducted to study the pulse characteristics of the fiber lasers under varying Q-switching conditions, including repetition rates, apodization profiles of FBG, peak reflectivity of the tunable FBG, cavity length and pump power.     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法，在D形内包层掺Yb3+双包层光纤一端直接写制出Bragg光栅，用作双包层光纤激光器的输出腔镜.试验得到了线宽为0.196nm，波长为1058.2nm，最高输出功率为570mW的稳定激光输出，解决了激光器中模式竞争造成的输出不稳定现象.从速率方程出发，对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析，结果与实验符合很好. 关键词： 双包层光纤光栅 掺Yb3＋双包层光纤激光器 相位掩模 速率方程     

Single-longitudinal-mode erbium-doped fiber laser based on a fiber Bragg grating Fabry-Perot filter

A novel single-longitudinal-mode (SLM) erbium-doped fiber laser with a simple linear cavity based on a fiber Bragg grating Fabry-Perot filter (FBG-FPF) and a narrowband (～0.06 nm) FBG is proposed and demonstrated experimentally. Two uniform FBGs form the FBG-FPF, which has two ultranarrow transmission bands with a bandwidth of 0.12 pm and a wavelength spacing of 0.095 nm. By slightly tuning the central wavelength of the narrowband FBG, SLM lasing at 1549.658 or 1549.563 nm (corresponding to the two transmission peaks of the FBG-FPF) is achieved with a laser output power of ～4 mW, when the pump power is ～75 mW.     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法 ,在D形内包层掺Yb3 双包层光纤一端直接写制出Bragg光栅 ,用作双包层光纤激光器的输出腔镜 .试验得到了线宽为 0 196nm ,波长为 10 5 8 2nm ,最高输出功率为 5 70mW的稳定激光输出 ,解决了激光器中模式竞争造成的输出不稳定现象 .从速率方程出发 ,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析 ,结果与实验符合很好     

Wideband tunable linear-cavity fiber laser source using strain-induced chirped fiber Bragg grating

A novel wideband tunable linear-cavity fiber laser source using strain-induced chirped fiber Bragg grating (FBG) and erbium–ytterbium co-doped fibers is proposed and demonstrated for the first time. The strain-induced chirped FBG, which acts as a partial-reflecting mirror, is achieved by bending a uniform FBG bonded at a slant onto the lateral surface of a simply supported beam. A single wavelength lasing with a maximum wavelength tuning range of 17 nm has been achieved experimentally.     

Proposal of metal bellows-based fiber Bragg grating accelerometer

A metal bellows-based fiber Bragg grating(FBG) accelerometer is proposed and experimentally demonstrated. The optical fiber(containing the FBG) is pre-tensioned,and the two ends of the optical fiber are fixed directly from the shell to the inertial mass. In this design,the FBG is uniformly tensioned to obtain a constant strain distribution over it. By employing this configuration,the FBG always has a sharp reflection characteristic with no broadening in its reflection spectrum during wavelength shifting. Dy...     

Actively mode-locked dual-wavelength fiber laser with close wavelength spacing using a fiber Bragg grating

A simple actively mode-locked fiber ring laser is proposed and successfully demonstrated to generate dual-wavelength picosecond pulses with close wavelength spacing using one Bragg grating in standard single-mode fiber. The proposed laser can be made to operate in stable dual-wavelength at room temperature, due to the birefringence characteristic of the FBG induced by transverse strain. Transverse strain loading on the FBG allows the wavelength spacing to be controlled. Generation of stable dual-wavelength pulses with a pulsewidth of 212–234 ps and a tunable wavelength separation from 0.2 to 0.44 nm at a pulse rate of 1.05 GHz was demonstrated.     

Simultaneous demodulation technique for a multiplexed fiber Fizeau interferometer and fiber Bragg grating sensor system

We propose a demodulation technique for a multiplexed fiber Fizeau interferometer (FFI) and fiber Bragg grating (FBG) sensor system using the discrete wavelet transform with signal processing enhancements. This simple and flexible demodulation technique determines the cavity length of FFI and the Bragg wavelength of FBG simultaneously and is especially suited for quasi-static measurements. We demonstrate this demodulation technique by performing some strain measurements, and a strain resolution of 1.0 microepsilon and an accuracy of 2.6 microepsilon are obtained. The maximum cross-talk of the sensor system is 6% of the applied strains.     

Development of a multiwavelength Raman fiber laser based on phase-shifted fiber Bragg gratings for long-distance remote-sensing applications

We propose a simple and flexible multiwavelength Raman fiber laser based on phase-shifted fiber Bragg gratings (FBGs) and a tunable chirped FBG. Using a simple multiwavelength Raman laser configuration with a single phase-shifted FBG and a tunable chirped FBG, we readily achieved simultaneous two-channel sensing probes with a high extinction ratio of more than 50 dB over a 50-km distance. The multiwavelength output was stable and the peak fluctuation was less than 0.5 dB. The temperature and strain sensitivities are estimated to be 10.1 pm/degrees C and 7.5 pm/microstrain, respectively.     

Chirped fiber Bragg gratings with arbitrary group delay responses using stepped-stretching fiber method

We present the design and development of piece-wise stepped-chirp fiber Bragg gratings (FBGs) with arbitrary group delay responses using a uniform phase mask in a pre-stretched fiber. The method involves writing a series of sub-gratings on a pre-stretched fiber whose length is varied during the UV exposure process. Two motorized stages are employed to control the length of the pre-stretched fiber in order to adjust the grating pitch at each writing step to achieve piece-wise stepped chirping of the FBG. To demonstrate the effectiveness of the method to produce chirped FBGs with arbitrary group delay responses, a linear-chirp FBG and a quadratic-chirp FBG were fabricated, and their measured performances agree well with analytical predictions. PACS 42.81.-i; 42.79.Dj; 42.79.Ci     

Switchable multi-wavelength erbium-doped fiber laser based on a four-mode FBG

We propose a switchable multi-wavelength erbium-doped fiber laser based on a four-mode fiber Bragg grating(FBG). The four-mode FBG is fabricated in a hydrogen pre-loaded fiber by the phase mask method, which can support four linearly polarized modes around 1550 nm. The five operation wavelengths are at 1547.5, 1546.8,1546.0, 1545.1, and 1544.2 nm, respectively. Through adjusting the polarization state and the lateral offset coupling in cavity, the laser can be switched into the operation state of single, dual, or triple wavelengths. The proposed laser has the advantages of simple configuration, stable operation, and easy adjustment.     

基于飞秒激光直写光纤光栅的掺镱光纤激光器

 利用飞秒激光微加工技术,可以在光纤纤芯内直写出布拉格光栅,它与传统的光纤光栅制作方法相比,具有耗时短、无需光敏光纤、周期可任意设定、光栅稳定性高等优点。采用800 nm钛宝石飞秒激光器,在Hi1060光纤内写入一支8 mm长的布拉格光栅,光纤光栅的周期为2.9 μm,这是中心波长为1 042 nm的八阶光纤布拉格光栅。将所得光栅与一段有源的双包层光纤熔接,作为激光输出镜,利用975 nm的LD光纤模块作为泵浦源,采用端泵浦技术构成双包层光纤激光器。双包层光纤采用Nufern公司镱(Yb³⁺)离子掺杂双包层光纤,光纤长度3 m。所得激光器的输出功率为71.1 W,中心波长1 042 nm,带宽约为0.8 nm。     

Tunable phase-shifted fiber Bragg grating based on a microchannel fabricated by a femtosecond laser

A phase-shifted fiber Bragg grating(PS-FBG) based on a microchannel was proposed and realized by combining the pointby-point scanning method with chemical etching. The PS-FBG is composed of a fiber Bragg grating(FBG) and a microchannel through the fiber core. The microchannel can introduce phase shift into the FBG. What is more important is that it exposes the fiber core to the external environment. The phase shift peak is sensitive to the liquid refractive index, and it shows a linear refractive index response wavelength and intensity sensitivity of 2.526 nm/RIU and-111 d B/RIU, respectively.Therefore, such gratings can be used as sensors or tunable filters.     

A cheap and practical FBG temperature sensor utilizing a long-period grating in a photonic crystal fiber

A whole temperature sensor in one package utilizing a fiber Bragg grating (FBG) made in a conventional single-mode fiber and which uses a long-period grating (LPG) made in a photonic crystal fiber is proposed and experimentally demonstrated. The function of the interrogation is that the wavelength change of the FBG with environmental temperature is transferred to the intensity of the output via the LPG. Utilizing the temperature-insensitivity of the LPG in the PCF, the interrogation is stable and enables a cheap and practical temperature measurement system with a wide dynamic range.