磁性Co/TiB2室温高效催化氨硼烷产氢及串联降解有机污染物

通过熔盐法制备TiB₂载体,并采用简单的沉淀-沉积法制备了Co/TiB₂磁性可回收纳米催化剂,用于室温催化氨硼烷（NH₃BH₃）溶液产氢及串联降解对硝基苯酚（4-NP）及偶氮染料酸性橙7（AO7）、酸性红1（AR1）和甲基橙（MO）等有机污染物。采用X射线衍射、扫描电子显微镜、透射电子显微镜、X射线光电子能谱、振动样品磁强计等表征方法对催化剂的微观形貌和结构等进行分析。结果表明,Co纳米粒子均匀地分布在TiB₂载体表面,晶粒尺寸约为40 nm,并且被TiB₂载体包覆,具有典型的金属-载体强相互作用。Co/TiB₂表现出优异的室温催化NH₃BH₃溶液产氢活性,产氢速率为565.8 mol_H2·mol_cat^-1·h^-1。在串联降解有机污染物反应中,Co/TiB₂在7 min内催化4-NP氨基化的转化率接近100%,反应速率常数高达0.72 min^-1;降解AO7的反应速率常数在3种偶氮染料中最高（0.34 min^-1）。通过EPR-DMPO（EPR=电子顺磁共振,DMPO=5,5-二甲基-1-吡咯啉-N-氧化物）自由基捕获实验检测出Co/TiB₂+NH₃BH₃催化体系中产生大量的氢自由基（·H）。得益于·H的强还原性,Co/TiB₂+NH₃BH₃催化体系能够将4-NP氨基化为具有更高价值的对氨基苯酚（4-AP）,同时能够还原偶氮染料分子中的显色基团偶氮基（—N=N—）。     

层层自组装修饰磁性纳米粒子及蛋白质吸附研究

采用层层自组装技术将聚天冬胺酸和聚乙二胺修饰到磁性纳米粒子表面上, 并研究了修饰后的磁性纳米粒子的zeta电势变化和对蛋白质的吸附. 先通过化学共沉淀的方法获得了四氧化三铁磁性纳米粒子, 然后利用层层自组装的方法对纳米粒子进行了修饰. 用TEM表征了纳米粒子的尺寸. 用红外光谱表征了修饰过程中磁性纳米粒子表面组成的变化情况. 研究了修饰过程对磁性纳米粒子的zeta电势的影响. zeta电势的正负和大小与表面连接的分子的带电性质有关. 磁性纳米粒子的等电点接近中性. 聚天冬胺酸修饰的磁性纳米粒子的Zeta电势为负值. 在聚乙二胺溶液的pH＝11时获得的双层修饰的磁性粒子的等电点接近9, 并且等电点随聚乙二胺溶液的pH的减小而减小. 结果也表明在pH＝7.4时具有不同表面电荷的磁性纳米粒子通过静电作用选择性地吸附蛋白质.     

表面氨基高密度化介孔氧化硅的合成及其高效去除酸性橙7

以月桂酸为阴离子表面活性剂,3-胺丙基三乙氧基硅烷(APTES)为共结构导向剂,合成了高含量氨基功能化介孔氧化硅材料(AFMS)。以AFMS为吸附剂对溶液中酸性橙7(AO7)进行吸附,对影响AO7吸附效率的相关因素进行了详细研究,结果表明,溶液pH值及温度影响较大。吸附动力学表明,本研究中合成的AFMS对AO7的吸附速率极快。Sips吸附模型对吸附等温线模拟效果最好,从中可知AO7在样品D(由3.0 mL正硅酸乙酯及1.4 mL APTES合成)上的最大吸附量为1.26 mmol·g^-1,远远高于相关文献报道的值。此外,通过吸-脱附循环实验证明,样品D具有良好的稳定性。     

良分散性磁性壳聚糖纳米粒子的制备及吸附性能研究

采用原位共沉淀法,在碱性条件下以环氧氯丙烷为交联剂,制备出了具有超顺磁性、分散性良好的磁性壳聚糖纳米粒子。用红外光谱仪(FTIR)、X射线衍射仪(XRD)、透射电子显微镜(TEM)、振动样品磁强计(VSM)对纳米粒子的组成、形貌和磁性能进行了表征。结果表明:用原位共沉淀法制备得到的磁性壳聚糖纳米粒子平均粒径约7nm,饱和磁化强度为73.5emu/g。与活性炭相比,磁性壳聚糖纳米粒子对偶氮染料具有很高的吸附容量和快速的吸附速率。     

Fe3O4@SiO2@TiO2-Co/rGO磁性光催化剂的合成及其光催化活性研究

采用溶胶-凝胶法和水热法（HTM）合成了Fe₃O₄@SiO₂@TiO₂-Co/rGO复合纳米粒子（磁性光催化剂）,通过X射线衍射、扫描电子显微镜及其能量分散光谱和UV-vis漫反射光谱对产物进行了表征分析.研究了Co掺杂量、溶液pH值、亚甲基蓝（MB）溶液初始浓度以及干扰离子（例如Cl^-、SO₄^2-、CO₃^2-）等因素对MB降解的影响,并对磁性光催化剂的可重复使用性进行了分析.正常实验条件下（pH=7,[MB]=10 mg/L,磁性光催化剂用量=0.1 g/50 mL）,150 min内MB最大去除率达到98.24%.干扰离子影响MB降解次序为CO₃^2- < Cl^- < SO₄^2-,磁性光催化剂重复使用7次MB光降解率仅下降7.07%,新型磁性光催化剂具有良好的MB降解性能和较高的重复使用性能.     

在酸性条件下合成氧化亚铜纳米立方体(英)

在微酸性(pH：4～6)的水热体系中130 ℃反应18 h合成了氧化亚铜纳米粒子，粒径约为100 nm，呈立方体外形。乙二胺和十六烷基胺在反应体系中充当缓冲试剂，调节反应液的pH值并控制体系中游离Cu²⁺的浓度，使得Cu²⁺不会被迅速还原成单质铜。所合成的纳米立方体的能带宽度约为2.51 eV，比氧化亚铜体材料和氧化亚铜纳米线蓝移了0.51 eV和0.17 eV，它有利于把太阳光谱中能量高的可见光转化成其他形式的能量。     

磁性壳聚糖/Fe3O4/氧化石墨烯吸附剂的制备及其多染料吸附性能

为了提高壳聚糖的多染料吸附性能并使其便于固液分离,采用共沉淀法制备了壳聚糖、磁铁矿纳米颗粒、氧化石墨烯复合磁性吸附剂(CS/Fe₃O₄/GO)。系统的结构表征显示,CS包覆的Fe₃O₄磁性纳米颗粒均匀地分布在GO的表面。CS/Fe₃O₄/GO具有高达42.5 emu·g^-1的室温铁磁性,因此可在外加磁场中实现高效固液分离。研究表明,CS/Fe₃O₄/GO对亚甲基蓝(MB)、甲基橙(MO)和刚果红(CR)等多种染料具有良好的吸附性能,溶液的pH、初始浓度和吸附时间对其多染料吸附性能具有显著影响。在最佳条件下,CS/Fe₃O₄/GO对MB、MO和CR的吸附量分别达到210.6、258.6和308.9 mg·g^-1。CS/Fe₃O₄/GO具有优异的循环利用性能,经5次循环后仍能保留90%以上的原始吸附量。采用吸附等温线和吸附动力学对CS/Fe₃O₄/GO的多染料吸附性能进行了拟合分析,并详细讨论了其吸附机理。     

磁性壳聚糖微球对牛血清白蛋白的吸附性能

在微乳液体系中, 以戊二醛为交联剂制备了磁性壳聚糖纳米粒子(Fe₂O₃-CS). 采用透射电子显微镜(TEM)、红外光谱(IR)、振动样品磁强计(VSM)等手段对纳米粒子进行表征. 结果表明, 纳米粒子的粒径在40 nm左右, 分散性良好, 具有较好的磁响应性能. 以碳二亚胺(EDC)为活化剂, 研究了Fe₂O₃-CS纳米粒子对牛血清白蛋白(BSA)分子的吸附性能, 并使用原子力显微镜(AFM)、紫外分光光度计(UV)进行表征. Fe₂O₃-CS粒子对BSA 的吸附大致符合Langmuir吸附模型, 298 K时饱和吸附量约为250 mg·g^-1, 吸附常数为0.007 L·mg^-1. 将BSA-粒子分散在不同pH的缓冲溶液中, 研究BSA-粒子复合物的稳定性. 用聚丙烯酰氨凝胶电泳(SDS-PAGE)对结果进行表征, 发现在碱性条件下BSA分子能从磁性粒子表面脱附下来.     

氟硅酸铵改性纳米HZSM-5分子筛催化甲醇制丙烯

在静态条件下, 采用不同浓度的氟硅酸铵溶液对纳米ZSM-5分子筛进行了改性处理. 利用粉末X射线衍射(XRD)、²⁷Al 魔角旋转固体核磁共振(²⁷Al MAS NMR)、X射线荧光光谱(XRF)、X射线光电子能谱(XPS)、N₂ 吸附、透射电镜(TEM)、NH₃程序升温脱附(NH₃-TPD)、吡啶吸附红外光谱(Py-IR)等技术对改性前后纳米ZSM-5分子筛的骨架结构、织构性质、酸性质进行了表征. 并在常压、反应温度为450℃、甲醇质量空速(WHSV)为1 h^-1的条件下, 研究了改性前后纳米HZSM- 的甲醇制丙烯(MTP)催化性能. 结果表明, 合适浓度的氟硅酸铵处 理能够选择性地脱除纳米ZSM-5 分子筛的外表面铝, 从而使得HZSM-5 的酸密度降低, 比表面积和孔容增大, MTP催化性能显著提高. 氟硅酸铵改性后纳米HZSM-5 的丙烯选择性和丙烯/乙烯(P/E)质量比分别由原来的 28.8%和2.6提高到45.1%和8.0, 催化剂寿命增加了近2倍.     

O-羧甲基壳聚糖纳米微粒制备及对Ni~(2+)吸附研究

将壳聚糖与氯乙酸反应,通过控制反应条件制备了取代度为0.71的O-羧甲基壳聚糖,将改性后的O-羧甲基壳聚糖与多聚磷酸钠反应,制备了粒径分布在370-710nm的O-羧甲基壳聚糖纳米微粒,透射电镜观察表明该微粒呈球状,平均粒径为450nm.在此基础上研究了O-羧甲基壳聚糖纳米微粒对工业电镀镍废水Ni~(2+)吸附性能,考察了溶液pH、Ni~(2+)起始浓度、平衡吸附时间、粒径等因素的影响,结果表明:O-羧甲基壳聚糖微粒最佳吸附条件是Ni~(2+)溶液pH为8.0、Ni~(2+)溶液起始浓度为33.28mg/ml、平衡吸附时间为0.5h、粒径较小的O-羧甲基壳聚糖纳米微粒对Ni~(2+)的吸附量要大于粒径较大的吸附量.     

Adsorption kinetics and thermodynamics of acid dyes on a carboxymethylated chitosan-conjugated magnetic nano-adsorbent

The monodisperse chitosan-conjugated Fe(3)O(4) nanoparticles with a mean diameter of 13.5 nm were fabricated by the carboxymethylation of chitosan and its covalent binding onto Fe(3)O(4) nanoparticles via carbodiimide activation. The carboxymethylated chitosan (CMCH)-conjugated Fe(3)O(4) nanoparticles with about 4.92 wt.-% of CMCH had an isoelectric point of 5.95 and were shown to be quite efficient as anionic magnetic nano-adsorbent for the removal of acid dyes. Both the adsorption capacities of crocein orange G (AO12) and acid green 25 (AG25), as the model compounds, decreased with increasing pH, and the decreasing effect was more significant for AO12. On the contrary, the increase in the ionic strength decreased the adsorption capacity of AG25 but did not affect, obviously, the adsorption capacity of AO12. By the addition of NaCl and NaOH, both AO12 and AG25 could desorb and their different desorption behavior could be attributed to the combined effect of pH and ionic strength. From the adsorption kinetics and thermodynamics studies, it was found that both the adsorption processes of AO12 and AG25 obeyed the pseudo-second-order kinetic model, Langmuir isotherm, and might be surface reaction-controlled. Furthermore, the time required to reach the equilibrium for each one was significantly shorter than those using the micro-sized adsorbents due to the large available surface area. Also, based on the weight of chitosan, the maximum adsorption capacities were 1 883 and 1 471 mg x g(-1) for AO12 and AG25, respectively, much higher than the reported data. Thus, the anionic magnetic nano-adsorbent could not only be magnetically manipulated but also possessed the advantages of fast adsorption rate and high adsorption capacity. This could be useful in the fields of separation and magnetic carriers. [formula in text].     

In Situ FTIR Spectroscopy Study of the Photodegradation of Acetaldehyde and azo Dye Photobleaching on Bismuth‐Modified TiO2

The photocatalytic properties of bismuth‐modified titania were studied by photobleaching of two aqueous azo dyes solutions (Reactive Black 5 and Acid Orange 7), and by photoinduced decomposition (PID) of acetaldehyde using in situ FTIR spectroscopy. Low bismuth doping concentrations up to 3 at.% is shown to lead to an increased photobleaching rate of both azo dyes solutions. Too high Bi dopant concentrations lead to less developed crystallite nanoparticles and exhibit weaker adsorption capacity. Bismuth doping altered the adsorption kinetics of acetaldehyde resulting in different surface products, and a modified photocatalytic reaction pathway was inferred.     

Adsorption of dyes on activated carbon and graphitic thermal carbon black

The adsorption of a basic dye (Methylene Blue; MB) and an acidic dye (Acid Orange; AO) has been studied on three activated carbons (ACs; FAS, SKD, and BAU) significantly differing in their porous structures and surface concentrations of ion-exchange groups and on graphitic thermal carbon black (GTCB). The effective specific surface area of FAS, SKD, and BAU determined by dye adsorption is, respectively, 60, 50, and 40% of the BET nitrogen adsorption surface area. The MB uptake on ACs and GTCB increases with rising pH, while the AO uptake decreases. Addition of an electrolyte (0.3 M NaCl) virtually does not effect the adsorption of dyes on ACs and GTCB. It is suggested that hydrophobic interactions, and not ionic ones, are the major contributors to the adsorption of dyes on ACs.     

Thermodynamics of the adsorption of different dyes onto bentonite modified with hexadecyltrimethylammonium cation

Removal of two different dyes: Acid Orange 10 (AO10) and Reactive Black 5 (RB5) from their aqueous solutions using organobentonite as adsorbent was investigated. The experiments were carried out at different temperatures (298, 313, 323, and 333 K) in order to obtain thermodynamic parameters for adsorbate/adsorbent system i.e., activation energy, Gibbs free energy, enthalpy and entropy. The results of thermodynamic studies indicated that the adsorption of both dyes onto organobentonite is an endothermic process, while the values for activation energies (76 kJ mol^?1 for AO10 and 51 kJ mol^?1 for RB5) indicated that chemisorption occurred.     

Application of Fenton‐Based Reactions for Treating Dye Wastewaters: Stability of Sulfonated Azo Dyes in the Presence of Iron(III)

Fenton‐ and photo‐assisted Fenton advanced oxidation processes generate reactive oxygen species from hydrogen peroxide and are candidates for the remediation of dye wastewaters. The purpose of this study was to investigate interactions of iron (III) with hydroxyazo dyes. The o‐hydroxyazo dyes Acid Orange 7 (AO7; 4‐[(2‐hydroxynaphthalen‐1‐yl)azo]benzenesulfonic acid sodium salt) and Acid Orange 10 (AO10; 7‐hydroxy‐8‐(phenylazo)naphthalene‐1,3‐disulfonic acid disodium salt) represent dyes allegedly able to chelate Fe^III through the chromophore. The p‐hydroxyazo dye Acid Orange 20 (AO20; 4‐[(4‐hydroxynaphthalen‐1‐yl)azo]benzenesulfonic acid sodium salt) represents an analogous structure that is unable to chelate Fe^III due to the position of the OH group. Reactions were carried out at pH 2 – 3 in perchlorate or chloride media in the absence of peroxide. No evidence was found by UV/VIS spectroscopy for complexation of Fe^III by the o‐hydroxyazo chromophore. Instead, Fe^III apparently coordinated or formed an ion pair with the sulfonate group, and, when only one sulfonate group was present (i.e., AO7), the dye formed a co‐precipitate with iron(III) hydrous oxides and perchlorate ion. Dye precipitation was seeded by colloidal iron hydrolysis product nuclei. By contrast, the p‐hydroxyazo dye (AO20) was rapidly oxidized by iron(III). The net Fe²⁺/oxidized AO20 ratio was 2 : 1, and a minor yield of 1,4‐naphthoquinone was obtained. The major initial oxidation product, which was not identified, formed a reversible complex with Fe²⁺. Results of this study indicate that the effectiveness of Fenton‐based methods for treating certain azo dyes that form insoluble ferric salts may be compromised by removal of the catalyst from solution. However, the degradation of certain other azo dyes might be assisted by direct thermal oxidation by iron(III).     

Rapid decolorization of water soluble azo-dyes by nanosized zero-valent iron immobilized on the exchange resin

Nanosized zero-valent iron (NZVI) supported on the cation exchange resin was synthesized and applied to decompose some water soluble azo dyes. The decomposition efficiency for azo dyes was evaluated by using the aqueous suspensions and parked column of this material. Batch experiments indicated that this novel material exhibited excellent degradation ability for 0.05 g·L1 of Acid Orange 7, Acid Orange 8, Acid Orange 10, Sunset Yellow, and Methyl Orange, with decolorization ratio up to 95% in 4 min; pH value was the key factor for degradation and H was one of the reactants; adsorption of azo dyes onto the material existed at the beginning but reduced gradually until disappearing completely. For the packed column system, 58%~90% of azo dyes were decomposed in the 1st circle of solution passing through the column, and the adsorption onto the materials could accelerate the degradation azo dyes with the increasing reaction time. During the degradation process, Fe2 , the product of NZVI, was exchanged to the resin again and could be reduced to Fe0 by KBH4 for reusing. The 10th refreshed NZVI possessed reductive activity up to 90% of the newly systhesized NZVI. Decomposing pollutants in the aqueous solution with columns packed with NZVI immobilized on the cation exchange resin is a promising technology that can solve the reclaiming and refreshing problem of NZVI.     

Synthesis of molecularly imprinted polymer nanoparticles for the fast and highly selective adsorption of sunset yellow

Novel molecularly imprinted polymer nanoparticles were synthesized by precipitation polymerization with sunset yellow as the template and [2‐(methacryloyloxy)ethyl] trimethylammonium chloride as the functional monomer. The molecularly imprinted polymer nanoparticles were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, and their specific surface area and thermal stability were measured. The molecularly imprinted polymer nanoparticles had a high adsorption capacity in wide pH range (pH 1–8) for sunset yellow. The adsorption equilibrium only needed 5 min, and the quantitative desorption was very fast (1 min) by using 10.0 mol/L HCl as the eluant. The maximum adsorption capacity of the molecularly imprinted polymer nanoparticles for sunset yellow was 144.6 mg/g. The adsorption isotherm and kinetic were well consistent with Langmuir adsorption model and pseudo‐second‐order kinetic model, respectively. The relative selectivity coefficients of the molecularly imprinted polymer nanoparticles for tartrazine and carmine were 9.766 and 12.64, respectively. The prepared molecularly imprinted polymer nanoparticles were repeatedly used and regenerated ten times without significant absorption capacity decrease.     

表面印迹纳米磁性壳聚糖的制备及对Cu(Ⅱ)的吸附研究

将壳聚糖与自制的纳米四氧化三铁反应,加入一定量的铜盐使其与壳聚糖络合,再用环氧氯丙烷交联,用酸洗脱铜离子,得到表面印迹的纳米磁性壳聚糖.考察了阴离子、交联剂浓度对铜印迹效果的影响.用振动磁力仪及透射电镜对样品的性质进行表征.研究了表面印迹的纳米磁性壳聚糖对Cu2 的吸附性能.研究结果显示,用硝酸铜印迹制备的表面印迹纳米磁性壳聚糖吸附剂平均粒径为25nm,饱和磁化强度为98.56emu/g,壳聚糖含量为18.7%.吸附剂吸附容量大,吸附速度快.在Cu2 初始浓度为3.91mmol/L,pH为5时,15min即达到吸附平衡,以壳聚糖计Cu2 的饱和吸附量为4.07mmol/g,比纯壳聚糖粉高2倍.在含Zn2 或Cd2 、Pb2 的二元体系溶液中,离子印迹吸附剂对Cu2 具有明显的选择吸附性,而未印迹的纯壳聚糖粉几乎没有选择性.吸附剂易回收,重复使用性好,重复使用4次后,吸附量约保留最初饱和吸附量的98%.     

胺修饰酚醛树脂对酸性橙Ⅱ的吸附性能研究

研究了自制胺修饰酚醛树脂(AMPF)对水溶性染料酸性橙II的吸附性能,探讨了pH值、温度、浓度等因素对酸性橙吸附性能的影响。结果表明,AMPF与市售大孔树脂D296和D301相似,对酸性橙均具有较强的吸附能力。温度升高有利于AMPF对酸性橙的吸附;酸性橙浓度升高,吸附量增大。AMPF对酸性橙的吸附符合Boyd液膜扩散控制。各种树脂对酸性橙的平衡吸附数据符合Langmuir方程和Freundlich等温式,其相关系数大于0.98,n均大于1,表明为优惠吸附。