A Synthetic Study of Chiral α‐Hydroxy‐H‐Phosphinates Based on Proline Catalysis

A highly enantioselective synthesis of α‐hydroxyphosphinates was achieved based on the L ‐proline‐catalyzed aldol reaction of α‐acylphosphinates and acetone. Due to the preexisting chirality at the phosphorus center, mixtures of two diastereomers of the α‐hydroxyphosphinates were obtained in moderate to good yields, with simultaneously high enantioselectivity for both diastereomers. The products could be converted into α‐hydroxy‐H‐phosphinates with satisfactory yields. Furthermore, an unprecedented oxidation–reduction reaction of the α‐hydroxyphosphinates or α‐hydroxy‐H‐phosphinates to form phosphonates was observed, and the mechanism involved in such a chemical transformation is discussed.     

Mechanistic Insight into the NN Bond‐Cleavage of Azo‐Compounds that was Induced by an Al?Al‐bonded Compound [L2−AlII?AlIIL2−]

An α‐diimine‐stabilized Al? Al‐bonded compound [L^2?Al^II? Al^IIL^2?] (L=[{(2,6‐iPr₂C₆H₃)NC(Me)}₂]; 1 ) consists of dianionic α‐diimine ligands and sub‐valent Al²⁺ ions and thus could potentially behave as a multielectron reductant. The reactions of compound 1 with azo‐compounds afforded phenylimido‐bridged products [L^?Al^III(μ₂‐NPh)(μ₂‐NAr)Al^IIIL^?] ( 2 – 4 ). During the reaction, the dianionic ligands and Al²⁺ ions were oxidized into monoanions and Al³⁺, respectively, whilst the [NAr]^2? imides were produced by the four‐electron reductive cleavage of the N?N double bond. Upon further reduction by Na, the monoanionic ligands in compound 2 were reduced to the dianion to give [(L^2?)₂Al^III₂(μ₂‐NPh)₂Na₂(thf)₄] ( 5 ). Interestingly, when asymmetric azo‐compounds were used, the asymmetric adducts were isolated as the only products (compounds 3 and 4 ). DFT calculations indicated that the reaction was quite feasible in the singlet electronic state, but the final product with the triplet‐state monoanionic ligands could result from an exothermic singlet‐to‐triplet conversion during the reaction process.     

Enantioselective Construction of α‐Chiral Silanes by Nickel‐Catalyzed C(sp3)−C(sp3) Cross‐Coupling

An enantioselective C(sp³)?C(sp³) cross‐coupling of racemic α‐silylated alkyl iodides and alkylzinc reagents is reported. The reaction is catalyzed by NiCl₂/(S,S)‐Bn‐Pybox and yields α‐chiral silanes with high enantiocontrol. The catalyst system does not promote the cross‐coupling of the corresponding carbon analogue, corroborating the stabilizing effect of the silyl group on the alkyl radical intermediate (α‐silicon effect). Both coupling partners can be, but do not need to be, functionalized, and hence, even α‐chiral silanes with no functional group in direct proximity of the asymmetrically substituted carbon atom become accessible. This distinguishes the new method from established approaches for the synthesis of α‐chiral silanes.     

Stereo‐ and Chemodivergent NHC‐Promoted Functionalisation of Arylalkylketenes with Chloral

Stereo‐ and chemodivergent enantioselective reaction pathways are observed upon treatment of alkylarylketenes and trichloroacetaldehyde (chloral) with N‐heterocyclic carbenes, giving selectively either β‐lactones (up to 88:12 dr, up to 94 % ee) or α‐chloroesters (up to 94 % ee). Either 2‐arylsubstitution or an α‐branched iPr alkyl substituent within the ketene favours the chlorination pathway, allowing chloral to be used as an electrophilic chlorinating reagent in asymmetric catalysis.     

Chiral Bis(imidazolidine)‐Derived NCN Pincer Rh Complex for Catalytic Asymmetric Mannich Reaction of Malononitrile with N‐Boc Imines

Chiral bis(imidazolidine)‐derived NCN–rhodium complexes ([PhBidine‐RhX₂] and [tBu‐PhBidine‐RhX₂]) were prepared by a C?H insertion method, and the structures were unequivocally determined by X‐ray crystallographic analysis. The [tBu‐PhBidine‐Rh(OAc)₂] complex smoothly catalyzed an asymmetric Mannich reaction of malononitrile with N‐Boc imines to give products in up to 94 % ee, which are useful for the synthesis of chiral α‐amino acids.     

The α‐effect exhibited in gas‐phase SN2@N and SN2@C reactions

In order to explore the existence of α‐effect in gas‐phase S_N2@N reactions, and to compare its similarity and difference with its counterpart in S_N2@C reactions, we have carried out a theoretical study on the reactivity of six α‐oxy‐Nus (FO^?, ClO^?, BrO^?, HOO^?, HSO^?, H₂NO^?) in the S_N2 reactions toward NR₂Cl (R = H, Me) and RCl (R = Me, i‐Pr) using the G2(+)_M theory. An enhanced reactivity induced by the α‐atom is found in all examined systems. The magnitude of the α‐effect in the reactions of NR₂Cl (R = H, Me) is generally smaller than that in the corresponding S_N2 reaction, but their variation trend with the identity of α‐atom is very similar. The origin of the α‐effect of the S_N2@N reactions is discussed in terms of activation strain analysis and thermodynamic analysis, indicating that the α‐effect in the S_N2@N reactions largely arises from transition state stabilization, and the “hyper‐reactivity” of these α‐Nus is also accompanied by an enhanced thermodynamic stability of products from the n_(N) → σ*_(O?Y) negative hyperconjugation. Meanwhile, it is found that the reactivity of oxy‐Nus in the S_N2 reactions toward NMe₂Cl is lower than toward i‐PrCl, which is different from previous experiments, that is, the S_N2 reactions of NH₂Cl is more facile than MeCl. © 2013 Wiley Periodicals, Inc.     

Tandem Synthesis of Benzo[b]carbazoles and Their Photoluminescent Properties

5 H‐Benzo[b]carbazoles were prepared through a tandem reaction between 2‐ethynyl‐N‐triphenylphosphoranylidene anilines and α‐diazoketones through ketenimine intermediates in moderate‐to‐good yields. By using this approach, benzo[b]benzo[5,6]indolo[3,2‐h]carbazoles, fluoreno[9,1‐ab]carbazoles, and fluoreno[9,1‐ab]fluoreno[1′,9′:5,6,7]indolo[3,2‐h]carbazoles were constructed in one pot. Moreover, the resulting products emitted light within the range 410–521 nm, with quantum yields of up to 62 %.     

Synthesis and X‐ray Crystal Structures of Zinc Complexes Supported by Chelating Ligands: Various Reactions of α‐Iminopyridines with ZnEt2

α‐Iminopyridine (α‐IP) is an important redox‐noninnocent ligand. The substituents on the imino function of α‐IPs have important impact on the reaction selectivity with diethylzinc. For the α‐IPs with a hydrogen substituent on the imino carbon, reduction occurred for the non‐bulky N‐substituents phenyl and 2‐methylphenyl groups, whereas alkyl addition and coupling reactions can be selectively achieved for the sterically bulky N‐substituents 2,6‐dimethylphenyl or 2,4,6‐trimethylphenyl group. However, for the α‐IPs with a CH₃ substituent on the imino carbon, the deprotonation reaction happened regardless of the N‐substituents of 2‐methylphenyl or 2,6‐dimethylphenyl group. All the products were isolated and characterized by single‐crystal X‐ray diffraction. The possible mechanisms of these reactions were also discussed.     

α‐Amino acid: an effective ligand for asymmetric catalysis of transfer hydrogenation of ketones

Ruthenium complexes, prepared by mixing the potassium salt of α‐amino acids and [RuCl₂(arene)]₂, acted as catalysts for the asymmetric transfer hydrogenation of ketones from 2‐propanol in the presence of KOH. For example, the transfer hydrogenation of acetophenone from 2‐propanol was catalyzed effectively by the ruthenium complex prepared from potassium L ‐prolinate and [RuCl₂(p‐cymene)]₂ to give (R)‐1‐phenylethanol in 72% yield with 81% ee. The yields and enantioselectivities of the product were influenced strongly by the structure of the α‐amino acidate ligand, arene ligand, and substrate, by the amount of additional base, and by the concentration of the substrates. The best enantiomeric excesses of the products was 92%, when 1‐tetralone was subjected to this reaction using a prolinated ruthenium complex bearing p‐cymene. Furthermore, the potassium salts of dipeptides were tested as a ligand for this transfer hydrogenation. Copyright © 2001 John Wiley & Sons, Ltd.     

Pd/Light‐Accelerated Atom‐Transfer Carbonylation of Alkyl Iodides: Applications in Multicomponent Coupling Processes Leading to Functionalized Carboxylic Acid Derivatives

The atom‐transfer carbonylation reaction of various alkyl iodides thereby leading to carboxylic acid esters was effectively accelerated by the addition of transition‐metal catalysts under photoirradiation conditions. By using a combined Pd/hν reaction system, vicinal C‐functionalization of alkenes was attained in which α‐substituted iodoalkanes, alkenes, carbon monoxide, and alcohols were coupled to give functionalized esters. When alkenyl alcohols were used as acceptor alkenes, three‐component coupling reactions, which were accompanied by intramolecular esterification, proceeded to give lactones. Pd‐dimer complex [Pd₂(CNMe)₆][PF₆]₂, which is known to undergo homolysis under photoirradiation conditions, worked quite well as a catalyst in these three‐ or four‐component coupling reactions. In this metal/radical hybrid system, both Pd radicals and acyl radicals are key players and a stereochemical study confirmed the carbonylation step proceeded through a radical carbonylation mechanism.     

Biocatalytic Conversion of Cyclic Ketones Bearing α‐Quaternary Stereocenters into Lactones in an Enantioselective Radical Approach to Medium‐Sized Carbocycles

Cyclic ketones bearing α‐quaternary stereocenters underwent efficient kinetic resolution using cyclohexanone monooxygenase (CHMO) from Acinetobacter calcoaceticus. Lactones possessing tetrasubstituted stereocenters were obtained with high enantioselectivity (up to >99 % ee) and complete chemoselectivity. Preparative‐scale biotransformations were exploited in conjunction with a SmI₂‐mediated cyclization process to access complex, enantiomerically enriched cycloheptan‐ and cycloctan‐1,4‐diols. In a parallel approach to structurally distinct products, enantiomerically enriched ketones from the resolution with an α‐quaternary stereocenter were used in a SmI₂‐mediated cyclization process to give cyclobutanol products (up to >99 % ee).     

Transition‐Metal‐Free Multicomponent Approach to Stereoenriched Cyclopentyl‐isoxazoles through C−C Bond Cleavage

An efficient multicomponent reaction for the synthesis of stereoenriched cyclopentyl‐isoxazoles from camphor‐derived α‐oximes, alkynes, and MeOH is reported. Our method involved a series of cascade transformations, including the in situ generation of an I^III catalyst, which catalyzed the addition of MeOH to a sterically hindered ketone. Oxidation of the oxime, and rearrangement of the α‐hydroxyiminium ion generated a nitrile oxide in situ, which, upon [3+2] cycloaddition reaction with an alkyne, delivered the regioselective product. This reaction was very selective for the syn‐oxime. This multicomponent approach was also extended to the synthesis of a new glycoconjugate, camphoric ester‐isoxazole C‐galactoside.     

A novel hydrophobic copper complex supported on γ‐Fe2O3 as a magnetically heterogeneous catalyst for one‐pot three‐component synthesis of α‐aminophosphonates

A novel hydrophobic copper complex supported on γ‐Fe₂O₃ is synthesized and characterized by different methods such as FT‐IR, XRD, TEM, SEM, TGA, VSM, ICP and CHN analysis. It was used as a magnetically recyclable heterogeneous catalyst for the efficient synthesis of α‐aminophosphonates via a one‐pot three‐component reaction under solvent‐free conditions. The present catalytic system worked extremely well for the synthesis of α‐aminophosphonates even up to five subsequent trails without significant loss of its catalytic activity or copper leaching. The TEM image and FT‐IR spectrum of the catalyst after five times recovery showed that the structure of the catalyst was stable under the reaction conditions with no change being observed. The strong magnetic properties of the reused catalyst were revealed by complete and easy attraction using an external magnet and also by VSM curve. This work represents the first and unique example of a hydrophobic copper complex for catalysis in water generating reactions.     

Construction of Optically Active Quaternary Propargyl Amines by Highly Enantioselective Zinc/BINOL‐Catalyzed Alkynylation of Ketoimines

A general and efficient method for the highly enantioselective alkynylation of ketoimines through a zinc/1,1′‐bi‐2‐naphthol (BINOL)‐catalyzed process has been developed. A variety of ketoimines, including α‐fluoroalkyl α‐imine esters, α‐aryl α‐imine esters, and trifluoromethyl aryl ketoimines, are applicable and provide their corresponding quaternary propargyl amines in excellent yields with high ee values (up to 99 % ee). Both the steric and electronic effects of substituents at the 3,3′ positions of BINOL are critical for the reaction efficiency and enantioselectivity. To demonstrate the usefulness of the method, (R)‐α‐CF₃ α‐proline has been prepared in a highly efficient manner. The notable features of this protocol are its broad substrate scope, high reaction efficiency (up to 99 %) and enantioselectivity (up to 99 % ee), low catalyst loading (5 mol % of BINOL derivative), and mild reaction conditions.     

A Conjugate Addition Approach to Diazo‐Containing Scaffolds with β Quaternary Centers

Structurally complex diazo‐containing scaffolds are formed by conjugate addition to vinyl diazonium salts. The electrophile, a little studied α‐diazonium‐α,β‐unsaturated carbonyl compound, is formed at low temperature under mild conditions by treating β‐hydroxy‐α‐diazo carbonyls with Sc(OTf)₃. Conjugate addition occurs selectively at the 3‐position of indole to give α‐diazo‐β‐indole carbonyls, and enoxy silanes react to give 2‐diazo‐1,4‐dicarbonyl products. These reactions result in the formation of tertiary and quaternary centers, and give products that would be otherwise difficult to form. Importantly, the diazo functional group is retained within the molecule for future manipulation. Treating an α‐diazo ester indole addition product with Rh₂(OAc)₄ caused a rearrangement to occur to give a 2‐(1H‐indol‐3‐yl)‐2‐enoate. In the case of diazo ketone compounds, this shift occurred spontaneously on prolonged exposure to the Lewis acidic reaction conditions.     

Diastereo‐ and Regioselective Addition of Thioamide Dianions to Imines and Aziridines: Synthesis of N‐Thioacyl‐1,2‐diamines and N‐Thioacyl‐1,3‐diamines

Addition reactions of thioamide dianions that were derived from N‐arylmethyl thioamides to imines and aziridines were carried out. The reactions of imines gave the addition products of N‐thioacyl‐1,2‐diamines in a highly diastereoselective manner in good‐to‐excellent yields. The diastereomeric purity of these N‐thioacyl‐1,2‐diamines could be enriched by simple recrystallization. The reduction of N‐thioacyl‐1,2‐diamines with LiAlH₄ gave their corresponding 1,2‐diamines in moderate‐to‐good yields with retention of their stereochemistry. The oxidative‐desulfurization/cyclization of an N‐thioacyl‐1,2‐diamine in CuCl₂/O₂ and I₂/pyridine systems gave the cyclized product in moderate yield and the trans isomer was obtained as the sole product. On the other hand, a similar cyclization reaction with antiformin (aq. NaClO) as an oxidant gave the cis isomer as the major product. The reactions of N‐tosylaziridines gave the addition products of N‐thioacyl‐1,3‐diamines with low diastereoselectivity but high regioselectivity and in good‐to‐excellent yields. The use of AlMe₃ as an additive improved the efficiency and regioselectivity of the reaction. The stereochemistry of the obtained products was determined by X‐ray diffraction.     

Hydroxylation and Ring‐Opening Mechanism of an Unusual Flavoprotein Monooxygenase, 2‐Methyl‐3‐hydroxypyridine‐5‐carboxylic Acid Oxygenase: A Theoretical Study

Hybrid meta‐GGA density functional theory (the MPWB1K functional) was used to study the hydroxylation and ring‐opening mechanism of 2‐methyl‐3‐hydroxypyridine‐5‐carboxylic acid oxygenase (MHPCO). This enzyme catalyses the conversion of 2‐methyl‐3‐hydroxypyridine‐5‐carboxylic acid (MHPC) to α‐(N‐acetylaminomethylene)succinic acid (AAMS), which is the essential ring‐opening step in the bacterial degradation of vitamin B₆. MHPCO belongs to the flavin‐containing aromatic hydroxylases family. However, MHPCO is capable of catalysing a subsequent aromatic ring‐cleavage reaction to give acyclic products rather than hydroxylated aromatic ones. Our calculations show that the re‐aromatisation of the hydroxylated intermediate occurs spontaneously in aqueous solution; this implies that the ring‐opening process occurs inside the enzyme’s active site, in which limited water is available. The instability of the hydroxylated intermediate of MHPCO is the main reason why acyclic products are formed. Previously proposed mechanisms for the ring‐opening step were studied, and were shown to be less likely to occur (ΔΔG^≠298>35 kcal mol^?1). Two new pathways with reasonable barrier heights (ΔΔG^≠298<15 kcal mol^?1) are reported herein, which are in accordance with all experimental information present to date.     

Catalytic Asymmetric Three‐component Hydroacyloxylation/ 1,4‐Conjugate Addition of Ynamides

A highly enantioselective three‐component hydroacyloxylation/1,4‐conjugate addition of ortho‐hydroxybenzyl alcohols, ynamides and carboxylic acids was developed under mild reaction conditions in the presence of a chiral N,N′‐dioxide/Sc(OTf)₃ complex, which went through in situ generated ortho‐quinone methides with α‐acyloxyenamides, delivering a range of corresponding chiral α‐acyloxyenamides derivatives containing gem(1,1)‐diaryl skeletons in moderate to good yields with excellent ee values. The scale‐up experiment and further derivation showed the practicality of this catalytic system. In addition, a possible catalytic cycle and transition state model was proposed to elucidate the origin of the stereoselectivity based on X‐ray crystal structure of the α‐acyloxyenamide intermediate and product.     

Highly Enantioselective Synthesis of α‐Stereogenic Esters through Catalytic Asymmetric Michael Addition of 4‐Oxo‐4‐arylbutenoates

Highly enantioselective Michael addition of 1,3‐dicarbonyl compounds and nitromethane to 4‐oxo‐4‐arylbutenoates catalyzed by N,N′‐dioxide–Sc(OTf)₃ complexes has been developed. Using 0.5–2 mol % catalyst loading, various α‐stereogenic esters were obtained regioselectively with excellent yields (up to 97 %) and enantioselectivities (up to >99 % ee). Moreover, the reaction performed well under nearly solvent‐free conditions. The products with functional groups are ready for further transformation, which showed the potential value of the catalytic approach. According to the experimental results and previous reports, a plausible working model has been proposed to explain the origin of the activation and the asymmetric induction.     

Easy Access to Modified Cyclodextrins by an Intramolecular Radical Approach

A simple method to modify the primary face of cyclodextrins (CDs) is described. The 6^I‐O‐yl radical of α‐, β‐, and γ‐CDs regioselectively abstracts the H5^II, located in the adjacent D ‐glucose unit, by an intramolecular 1,8‐hydrogen‐atom‐transfer reaction through a geometrically restricted nine‐membered transition state to give a stable 1,3,5‐trioxocane ring. The reaction has been extended to the 1,4‐diols of α‐ and β‐CD to give the corresponding bis(trioxocane)s. The C₂‐symmetric bis(trioxocane) corresponding to the α‐CD is a stable crystalline solid whose structure was confirmed by X‐ray diffraction analysis. The calculated geometric parameters confirm that the primary face is severely distorted toward a narrower elliptical shape for this rim.