Direct Synthesis of a Covalent Triazine‐Based Framework from Aromatic Amides

There have been extensive efforts to synthesize crystalline covalent triazine‐based frameworks (CTFs) for practical applications and to realize their potential. The phosphorus pentoxide (P₂O₅)‐catalyzed direct condensation of aromatic amide instead of aromatic nitrile to form triazine rings. P₂O₅‐catalyzed condensation was applied on terephthalamide to construct a covalent triazine‐based framework (pCTF‐1). This approach yielded highly crystalline pCTF‐1 with high specific surface area (2034.1 m² g^?1). At low pressure, the pCTF‐1 showed high CO₂ (21.9 wt % at 273 K) and H₂ (1.75 wt % at 77 K) uptake capacities. The direct formation of a triazine‐based COF was also confirmed by model reactions, with the P₂O₅‐catalyzed condensation reaction of both benzamide and benzonitrile to form 1,3,5‐triphenyl‐2,4,6‐triazine in high yield.     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

Microporous Polymers from a Carbazole‐Based Triptycene Monomer: Synthesis and Their Applications for Gas Uptake

Two kinds of novel organic microporous polymers TCP s ( TCP‐A and TCP‐B ) were prepared by two cost‐effective synthetic strategies from the monomer of tricarbazolyltriptycene ( TCT ). Their structure and properties were characterized by FT‐IR, solid ¹³C NMR, powder XRD, SEM, TEM, and gas absorption measurements. TCP‐B displayed a high surface area (1469 m² g^?1) and excellent H₂ storage (1.70 wt % at 1 bar/77 K) and CO₂ uptake abilities (16.1 wt % at 1 bar/273 K), which makes it a promising material for potential application in gas storage.     

Rational Design of MOF/COF Hybrid Materials for Photocatalytic H2 Evolution in the Presence of Sacrificial Electron Donors

Crystalline and porous covalent organic frameworks (COFs) and metal‐organic frameworks (MOFs) materials have attracted enormous attention in the field of photocatalytic H₂ evolution due to their long‐range order structures, large surface areas, outstanding visible light absorbance, and tunable band gaps. In this work, we successfully integrated two‐dimensional (2D) COF with stable MOF. By covalently anchoring NH₂‐UiO‐66 onto the surface of TpPa‐1‐COF, a new type of MOF/COF hybrid materials with high surface area, porous framework, and high crystallinity was synthesized. The resulting hierarchical porous hybrid materials show efficient photocatalytic H₂ evolution under visible light irradiation. Especially, NH₂‐UiO‐66/TpPa‐1‐COF (4:6) exhibits the maximum photocatalytic H₂ evolution rate of 23.41 mmol g^?1 h^?1 (with the TOF of 402.36 h^?1), which is approximately 20 times higher than that of the parent TpPa‐1‐COF and the best performance photocatalyst for H₂ evolution among various MOF‐ and COF‐based photocatalysts.     

Water‐Stable Zirconium‐Based Metal–Organic Framework Material with High‐Surface Area and Gas‐Storage Capacities

We designed, synthesized, and characterized a new Zr‐based metal–organic framework material, NU‐1100 , with a pore volume of 1.53 ccg^?1 and Brunauer–Emmett–Teller (BET) surface area of 4020 m²g^?1; to our knowledge, currently the highest published for Zr‐based MOFs. CH₄/CO₂/H₂ adsorption isotherms were obtained over a broad range of pressures and temperatures and are in excellent agreement with the computational predictions. The total hydrogen adsorption at 65 bar and 77 K is 0.092 g g^?1, which corresponds to 43 g L^?1. The volumetric and gravimetric methane‐storage capacities at 65 bar and 298 K are approximately 180 v_STP/v and 0.27 g g^?1, respectively.     

A Robust 3D Cage‐like Ultramicroporous Network Structure with High Gas‐Uptake Capacity

A three‐dimensional (3D) cage‐like organic network (3D‐CON) structure synthesized by the straightforward condensation of building blocks designed with gas adsorption properties is presented. The 3D‐CON can be prepared using an easy but powerful route, which is essential for commercial scale‐up. The resulting fused aromatic 3D‐CON exhibited a high Brunauer–Emmett–Teller (BET) specific surface area of up to 2247 m² g^?1. More importantly, the 3D‐CON displayed outstanding low pressure hydrogen (H₂, 2.64 wt %, 1.0 bar and 77 K), methane (CH₄, 2.4 wt %, 1.0 bar and 273 K), and carbon dioxide (CO₂, 26.7 wt %, 1.0 bar and 273 K) uptake with a high isosteric heat of adsorption (H₂, 8.10 kJ mol^?1; CH₄, 18.72 kJ mol^?1; CO₂, 31.87 kJ mol^?1). These values are among the best reported for organic networks with high thermal stability (ca. 600 °C).     

Porphyrin‐based covalent triazine frameworks: Porosity,adsorption performance,and drug delivery

Two porous porphyrin‐based covalent triazine frameworks (PCTFs), in which porphyrin is incorporated as building block, have been synthesized by the Friedel–Crafts reaction. The copolymer PCTFs show large Brunauer–Emmett–Teller specific surface area of up to 1089 m² g^?1, high CO₂ uptake capacity reaching 139.9 mg g^?1 at 273 K/1.0 bar, and good selectivity for CO₂/CH₄ adsorption attaining 6.1 at 273 K/1.0 bar. The resulting porous solids also can be used as matrices for drug delivery of ibuprofen in vitro. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2594–2600     

Semiconductor/Covalent‐Organic‐Framework Z‐Scheme Heterojunctions for Artificial Photosynthesis

A strategy to covalently connect crystalline covalent organic frameworks (COFs) with semiconductors to create stable organic–inorganic Z‐scheme heterojunctions for artificial photosynthesis is presented. A series of COF–semiconductor Z‐scheme photocatalysts combining water‐oxidation semiconductors (TiO₂, Bi₂WO₆, and α‐Fe₂O₃) with CO₂ reduction COFs (COF‐316/318) was synthesized and exhibited high photocatalytic CO₂‐to‐CO conversion efficiencies (up to 69.67 μmol g^?1 h^?1), with H₂O as the electron donor in the gas–solid CO₂ reduction, without additional photosensitizers and sacrificial agents. This is the first report of covalently bonded COF/inorganic‐semiconductor systems utilizing the Z‐scheme applied for artificial photosynthesis. Experiments and calculations confirmed efficient semiconductor‐to‐COF electron transfer by covalent coupling, resulting in electron accumulation in the cyano/pyridine moieties of the COF for CO₂ reduction and holes in the semiconductor for H₂O oxidation, thus mimicking natural photosynthesis.     

Ionic Covalent Organic Frameworks with Spiroborate Linkage

A novel type of ionic covalent organic framework (ICOF), which contains sp³ hybridized boron anionic centers and tunable countercations, was constructed by formation of spiroborate linkages. These ICOFs exhibit high BET surface areas up to 1259 m² g^?1 and adsorb a significant amount of H₂ (up to 3.11 wt %, 77 K, 1 bar) and CH₄ (up to 4.62 wt %, 273 K, 1 bar). Importantly, the materials show good thermal stabilities and excellent resistance to hydrolysis, remaining nearly intact when immersed in water or basic solution for two days. The presence of permanently immobilized ion centers in ICOFs enables the transportation of lithium ions with room‐temperature lithium‐ion conductivity of 3.05×10^?5 S cm^?1 and an average Li⁺ transference number value of 0.80±0.02. Our approach thus provides a convenient route to highly stable COFs with ionic linkages, which can potentially serve as absorbents for alternative energy sources such as H₂, CH₄, and also as solid lithium electrolytes/separators for the next‐generation lithium batteries.     

Hot π‐Electron Tunneling of Metal–Insulator–COF Nanostructures for Efficient Hydrogen Production

A metal–insulator–semiconductor (MIS) photosystem based on covalent organic framework (COF) semiconductors was designed for robust and efficient hydrogen evolution under visible‐light irradiation. A maximal H₂ evolution rate of 8.42 mmol h^?1 g^?1 and a turnover frequency of 789.5 h^?1 were achieved by using a MIS photosystem prepared by electrostatic self‐assembly of polyvinylpyrrolidone (PVP) insulator‐capped Pt nanoparticles (NPs) with the hydrophilic imine‐linked TP‐COFs having =C=O?H?N= hydrogen‐bonding groups. The hot π‐electrons in the photoexcited n‐type TP‐COF semiconductors can be efficiently extracted and tunneled to Pt NPs across an ultrathin PVP insulating layer to reduce protons to H₂. Compared to the Schottky‐type counterparts, the COF‐based MIS photosystems give a 32‐fold‐enhanced carrier efficiency, attributed to the combined enhancement of photoexcitation rate, charge separation, and oxidation rate of holes accumulated in the valence band of the TP‐COF semiconductor.     

A Hollow Microtubular Triazine‐ and Benzobisoxazole‐Based Covalent Organic Framework Presenting Sponge‐Like Shells That Functions as a High‐Performance Supercapacitor

In this paper we report the construction of a hollow microtubular triazine‐ and benzobisoxazole‐based covalent organic framework (COF) presenting a sponge‐like shell through a template‐free [3+2] condensation of the planar molecules 2,4,6‐tris(4‐formylphenyl)triazine (TPT‐3CHO) and 2,5‐diaminohydroquinone dihydrochloride (DAHQ‐2HCl). The synthesized COF exhibited extremely high crystallinity, a high surface area (ca. 1855 m² g^?1), and ultrahigh thermal stability. Interestingly, a time‐dependent study of the formation of the hollow microtubular COF having a sponge‐like shell revealed a transformation from initial ribbon‐like crystallites into a hollow tubular structure, and confirmed that the hollow nature of the synthesized COF was controlled by inside‐out Ostwald ripening, while the non‐interaction of the crystallites on the outer surface was responsible for the sponge‐like surface of the tubules. This COF exhibited significant supercapacitor performance: a high specific capacitance of 256 F g^?1 at a current density of 0.5 A g^?1, excellent cycling stability (98.8 % capacitance retention over 1850 cycles), and a high energy density of 43 Wh kg^?1. Such hollow structural COFs with sponge‐like shells appear to have great potential for use as high‐performance supercapacitors in energy storage applications.     

Vinylene‐Linked Covalent Organic Frameworks by Base‐Catalyzed Aldol Condensation

Two 2D covalent organic frameworks (COFs) linked by vinylene (?CH=CH?) groups (V‐COF‐1 and V‐COF‐2) are synthesized by exploiting the electron deficient nature of the aromatic s‐triazine unit of C₃‐symmetric 2,4,6‐trimethyl‐s‐triazine (TMT). The acidic terminal methyl hydrogens of TMT can easily be abstracted by a base, resulting in a stabilized carbanion, which further undergoes aldol condensation with multitopic aryl aldehydes to be reticulated into extended crystalline frameworks (V‐COFs). Both V‐COF‐1 (with terepthalaldehyde (TA)) and V‐COF‐2 (with 1,3,5‐tris(p‐formylphenyl)benzene (TFPB)) are polycrystalline and exhibit permanent porosity and BET surface areas of 1341 m² g^?1 and 627 m² g^?1, respectively. Owing to the close proximity (3.52 Å) of the pre‐organized vinylene linkages within adjacent 2D layers stacked in eclipsed fashion, [2+2] photo‐cycloadditon in V‐COF‐1 formed covalent crosslinks between the COF layers.     

<Emphasis Type="Italic">Tetra</Emphasis>-armed conjugated microporous polymers for gas adsorption and photocatalytic hydrogen evolution

Two novel tetra-armed conjugated microporous polymers with different geometries have been designed and synthesized via Suzuki-Miyaura cross coupling polycondensation. Both polymers are stable in various organic solvents tested and are thermally stable. The pyrene-containing polymer of PrPy with the rigid pyrene unit shows a higher Brunauer-Emmet-Teller specific surface area of 1219 m² g^?1 than the tetraphenylethylene-containing polymer of PrTPE (770 m² g^?1), which leads to a high CO₂ uptake ability of 3.89 mmol g^?1 at 1.13 bar/273 K and a H₂ uptake ability of 1.69 wt% at 1.13 bar/77 K. The photocatalytic hydrogen production experiments revealed that PrPy also shows a better photocatalytic performance than PrTPE due to the higher conjugation degree and planar structure, the broader UV-visible (UV-Vis) absorption, the lower photoluminescence lifetime, and the higher specific surface area.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Synthesis of Porous Covalent Quinazoline Networks (CQNs) and Their Gas Sorption Properties

The development of different classes of porous polymers by linking organic molecules using new chemistries still remains a great challenge. Herein, we introduce for the first time the synthesis of covalent quinazoline networks (CQNs) using an ionothermal synthesis protocol. Zinc chloride (ZnCl₂) was used as the solvent and catalyst for the condensation of aromatic ortho‐aminonitriles to produce tricycloquinazoline linkages. The resulting CQNs show a high porosity with a surface area up to 1870 m² g^?1. Varying the temperature and the amount of catalyst enables us to control the surface area as well as the pore size distribution of the CQNs. Furthermore, their high nitrogen content and significant microporosity make them a promising CO₂ adsorbent with a CO₂ uptake capacity of 7.16 mmol g^?1 (31.5 wt %) at 273 K and 1 bar. Because of their exceptional CO₂ sorption properties, they are promising candidates as an adsorbent for the selective capture of CO₂ from flue gas.     

Porous Covalent Organic Framework Based Hydrogen-Bond Nanotrap for the Precise Recognition and Separation of Gold

Utilizing weak interactions to effectively recover and separate precious metals in solution is of great importance but the practice remains a challenge. Herein, we report a novel strategy to achieve precise recognition and separation of gold by regulating the hydrogen-bond (H-bond) nanotrap within the pore of covalent organic frameworks (COFs). It is found that both COF-HNU25 and COF-HNU26 can efficiently capture Au^III with fast kinetics, high selectivity, and uptake capacity. In particular, the COF-HNU25 with the high density of H-bond nanotraps exhibits an excellent gold uptake capacity of 1725 mg g⁻¹, which is significantly higher than that (219 mg g⁻¹) of its isostructural COF (COF-42) without H-bond nanostrap in the pores. Importantly, the uptake capacity is strongly correlated to the number of H-bonds between phenolic OH in the COF and [AuCl₄]⁻ in water, and multiple H-bond interactions are the key driving force for the excellent gold recovery and reusability of the adsorbent.     

Porous‐Organic‐Framework‐Templated Nitrogen‐Rich Porous Carbon as a More Proficient Electrocatalyst than Pt/C for the Electrochemical Reduction of Oxygen

Porous nitrogen‐rich carbon (POF‐C‐1000) that was synthesized by using a porous organic framework (POF) as a self‐sacrificing host template in a nanocasting process possessed a high degree of graphitization in an ordered structural arrangement with large domains and well‐ordered arrays of carbon sheets. POF‐C‐1000 exhibits favorable electrocatalytic activity for the oxygen‐reduction reaction (ORR) with a clear positive shift of about 40 mV in the onset potential compared to that of a traditional, commercially available Pt/C catalyst. In addition, irrespective of its moderate surface area (785 m² g^?1), POF‐C‐1000 showed a reasonable H₂ adsorption of 1.6 wt % (77 K) and a CO₂ uptake of 3.5 mmol g^?1 (273 K).     

A ferrocene‐containing porous organic polymer linked by tetrahedral silicon‐centered units for gas sorption

A novel ferrocene‐containing porous organic polymer (FPOP) has been prepared by Sonogashira‐Hagihara coupling reaction of 1,1′‐dibromoferrocene and tetrakis(4‐ethynylphenyl)silane. Compared with other polymers, the resulting polymer possesses excellent thermal stability with the decomposition temperature of 415°C and high porosity with Brunauer–Emmett–Teller (BET) surface area of 542 m² g^?1 as measured by nitrogen adsorption‐desoprtion isotherm at 77 K. For applications, it shows moderate carbon dioxide uptakes of up to 1.42 mmol g^?1 (6.26 wt%) at 273 K/1.0 bar and 0.82 mmol g^?1 (3.62 wt%) at 298 K/1.0 bar, and hydrogen capacity of up to 0.45 mmol g^?1 (0.91 wt%) at 77 K/1.0 bar, indicating that FPOP might be utilized as a promising candidate for storing carbon dioxide and hydrogen. Although FPOP possesses lower porosity than many porous polymers, the gas capacities are higher or comparable to them, thereby revealing that the incorporation of ferrocene units into the network is an effective strategy to enhance the affinity between the framework and gas.     

Route to a family of robust, non-interpenetrated metal-organic frameworks with pto-like topology

A combination of topological rules and quantum chemical calculations has facilitated the development of a rational metal–organic framework (MOF) synthetic strategy using the tritopic benzene‐1,3,5‐tribenzoate (btb) linker and a neutral cross‐linker 4,4′‐bipyridine (bipy). A series of new compounds, namely [M₂(bipy)]₃(btb)₄ (DUT‐23(M), M=Zn, Co, Cu, Ni), [Cu₂(bisqui)_0.5]₃(btb)₄ (DUT‐24, bisqui=diethyl (R,S)‐4,4′‐biquinoline‐3,3′‐dicarboxylate), [Cu₂(py)_1.5(H₂O)_0.5]₃(btb)₄ (DUT‐33, py=pyridine), and [Cu₂(H₂O)₂]₃(btb)₄ (DUT‐34), with high specific surface areas and pore volumes (up to 2.03 m³ g^?1 for DUT‐23(Co)) were synthesized. For DUT‐23(Co), excess storage capacities were determined for methane (268 mg g^?1 at 100 bar and 298 K), hydrogen (74 mg g^?1 at 40 bar and 77 K), and n‐butane (99 mg g^?1at 293 K). DUT‐34 is a non‐cross‐linked version of DUT‐23 (non‐interpenetrated pendant to MOF‐14) that possesses open metal sites and can therefore be used as a catalyst. The accessibility of the pores in DUT‐34 to potential substrate molecules was proven by liquid phase adsorption. By exchanging the N,N donor 4,4′‐bipyridine with a substituted racemic biquinoline, DUT‐24 was obtained. This opens a route to the synthesis of a chiral compound, which could be interesting for enantioselective separation.     

A highly porous metal-organic framework: structural transformations of a guest-free MOF depending on activation method and temperature

A doubly interpenetrating porous metal–organic framework ( SNU‐77 ) has been synthesized from the solvothermal reaction of the extended carboxylic acid tris(4′‐carboxybiphenyl)amine (H₃TCBPA) and Zn(NO₃)₂ ? 6H₂O in N,N‐dimethylacetamide (DMA). SNU‐77 undergoes single‐crystal‐to‐single‐crystal transformations during various activation processes, such as room‐temperature evacuation, supercritical CO₂ drying, and high temperature evacuation, to afford SNU‐77R , SNU‐77S , and SNU‐77H , respectively. These guest‐free MOFs exhibited different fine structures with different window shapes and different effective window sizes at room temperature. Variable‐temperature synchrotron single‐crystal X‐ray analyses reveal that the guest‐free structure is also affected by changes in temperature. Despite the different fine structures, SNU‐77R , SNU‐77S , and SNU‐77H show similar gas sorption properties due to the nonbreathing nature of the framework and an additional structural change upon cooling to cryogenic gas sorption temperature. SNU‐77H exhibits a large surface area (BET, 3670 m² g^?1), a large pore volume (1.52 cm³ g^?1), and exceptionally high uptake capacities for N₂, H₂, O₂, CO₂, and CH₄ gases.