Catalytic Asymmetric Synthesis of O‐Acetylcyanohydrins from Potassium Cyanide,Acetic Anhydride,and Aldehydes,Promoted by Chiral Salen Complexes of Titanium(IV) and Vanadium(V)

The utility of the chiral [Ti(μ‐O)(salen)]₂ complexes (R)‐ and (S)‐ 1 (H₂salen was prepared from (R,R)‐ or (S,S)‐cyclohexane‐1,2‐diamine and 3,5‐di(tert‐butyl)‐2‐hydroxybenzaldehyde) as catalysts for the asymmetric addition of KCN and Ac₂O to aldehydes to produce O‐acetylcyanohydrins was investigated. It was shown that the complexes were active at a substrate/catalyst ratio of 100 : 1 and produced the O‐protected cyanohydrins with ee in the range of 60–92% at −40°. Other complexes, [Ti₂(AcO)₂(μ‐O)(salen)₂] ((R)‐ 4 ) and [Ti(CF₃COO)₂(salen)] ((R)‐ 5 ), were prepared from (R)‐ 1 by treatment with different amounts of Ac₂O and (CF₃CO)₂O, and their catalytic activities were tested under the same conditions. The efficiency of (R)‐ 4 was found to be even greater than that of (R)‐ 1 , whereas (R)‐ 5 was inactive. The synthesis of the corresponding salen complexes of V^IV and V^V, [V(O)(salen)] ((R)‐ 2 ) and [V(O)(salen)(H₂O)] [S(O)₃OEt] ((R)‐ 3 ), was elaborated, and their X‐ray crystal structures were determined. The efficiency of (R)‐ 3 was sufficient to produce O‐acetyl derivatives of aromatic cyanohydrins with ee in the range of 80–91% at −40°.     

Synthesis and molecular structure of Cr(salen)(μ‐N)RhCl(COD): the first example of a heterobimetallic nitride‐bridged complex containing chromium

Five‐coordinate Cr(N)(salen) {salen is 2,2′‐[ethane‐1,2‐diylbis(nitrilomethylidyne)]diphenolate} reacts with [RhCl(COD)]₂ (COD is 1,5‐cyclooctadiene) to yield the heterobimetallic nitride‐bridged title compound, namely chlorido‐2κCl‐[2(η⁴)‐1,5‐cyclooctadiene]{2,2′‐[ethane‐1,2‐diylbis(nitrilomethylidyne)]diphenolato‐1κ⁴O,N,N′,O′}‐μ‐nitrido‐1:2κ²N:N‐chromium(V)rhodium(I), [CrRh(C₁₆H₁₄N₂O₂)ClN(C₈H₁₂)]. The Cr—N bond of 1.5936 (14) Å is elongated by only 0.035 Å compared to the terminal Cr—N bond in the precursor. The nitride bridge is close to being linear [173.03 (9)°] and the Rh—N bond of 1.9594 (14) Å is very short for a monodentate nitrogen‐donor ligand, indicating significant π‐acceptor character of the Cr[triple‐bond]N group.     

A three‐dimensional homochiral metal–organic framework constructed from manganese(II) with S‐carboxymethyl‐N‐(p‐tosyl)‐l‐cysteine and 4,4′‐bipyridine

In the chiral polymeric title compound, poly[aqua(4,4′‐bipyridine)[μ₃‐S‐carboxylatomethyl‐N‐(p‐tosyl)‐l ‐cysteinato]manganese(II)], [Mn(C₁₂H₁₃NO₆S₂)(C₁₀H₈N₂)(H₂O)]_n, the Mn^II ion is coordinated in a distorted octahedral geometry by one water molecule, three carboxylate O atoms from three S‐carboxyatomethyl‐N‐(p‐tosyl)‐l ‐cysteinate (Ts‐cmc) ligands and two N atoms from two 4,4′‐bipyridine molecules. Each Ts‐cmc ligand behaves as a chiral μ₃‐linker connecting three Mn^II ions. The two‐dimensional frameworks thus formed are further connected by 4,4′‐bipyridine ligands into a three‐dimensional homochiral metal–organic framework. This is a rare case of a homochiral metal–organic framework with a flexible chiral ligand as linker, and this result demonstrates the important role of noncovalent interactions in stabilizing such assemblies.     

Single‐Crystal to Single‐Crystal Linker Substitution,Linker Place Exchange,and Transmetalation Reactions in Interpenetrated Pillared–Bilayer Zinc(II) Metal–Organic Frameworks

A twofold interpenetrated pillared–bilayer framework, {[Zn₃( L )₂( L₂ )(DMF)] ? (18DMF)(6H₂O)}_n ( 1 ), has been synthesized from the ligands tris(4′‐carboxybiphenyl)amine ( H₃L ) and 1,2‐bis(4‐pyridyl)ethylene ( L₂ ). The structure contains [Zn₃(COO)₆] secondary building units (SBUs), in which three Zn^II ions are almost linear with carboxylate bridging. This framework undergoes reversible pillar linker substitution reactions at the terminal Zn^II centers with three different dipyridyl linkers of different lengths to afford three daughter frameworks, 2 – 4 . Frameworks 2 – 4 are interconvertible through reversible linker substitution reactions. Also, competitive linker‐exchange experiments show preferential incorporation of linker L₃ in the parent framework 1 . The larger linker L₅ does not undergo such substitution reactions and framework 5 , which contains this linker, can be synthesized solvothermally as a twofold interpenetrated structure. Interestingly, when framework 5 is dipped in a solution of L₃ in DMF, linker substitution takes place as before, but linker L₅ now moves and diagonally binds two Zn^II centers to afford 6 as a nonpenetrated single framework. This linker place exchange reaction is unprecedented. All of these reactions take place in a single‐crystal to single‐crystal (SC‐SC) manner, and have been observed directly through X‐ray crystallography. In addition, each 3D framework undergoes complete copper(II) transmetalation.     

Iron pyrrole‐based PNP pincer ligand complexes as catalyst precursors

The structure of a pincer ligand consists of a backbone and two `arms' which typically contain a P or N atom. They are tridentate ligands that coordinate to a metal center in a meridional configuration. A series of three iron complexes containing the pyrrole‐based PNP pincer ligand 2,5‐bis[(diisopropylphosphanyl)methyl]pyrrolide (PN^pyrP) has been synthesized. These complexes are possible precursors to new iron catalysts. {2,5‐Bis[(diisopropylphosphanyl)methyl]pyrrolido‐κ³P ,N ,P ′}carbonylchlorido(trimethylphosphane‐κP )iron(II), [Fe(C₁₈H₃₄NP₂)Cl(C₃H₉P)(CO)] or [Fe(PN^pyrP)Cl(PMe₃)(CO)], (I), has a slightly distorted octahedral geometry, with the Cl and CO ligands occupying the apical positions. {2,5‐Bis[(diisopropylphosphanyl)methyl]pyrrolido‐κ³P ,N ,P ′}chlorido(pyridine‐κN )iron(II), [Fe(C₁₈H₃₄NP₂)Cl(C₅H₅N)] or [Fe(PN^pyrP)Cl(py)] (py is pyridine), (II), is a five‐coordinate square‐pyramidal complex, with the pyridine ligand in the apical position. {2,5‐Bis[(diisopropylphosphanyl)methyl]pyrrolido‐κ³P ,N ,P ′}dicarbonylchloridoiron(II), [Fe(C₁₈H₃₄NP₂)Cl(CO)₂] or [Fe(PN^pyrP)Cl(CO)₂], (III), is structurally similar to (I), but with the PMe₃ ligand replaced by a second carbonyl ligand from the reaction of (II) with CO. The two carbonyl ligands are in a cis configuration, and there is positional disorder of the chloride and trans carbonyl ligands.     

Synthesis,structural characterization and computational studies of catena‐poly[chlorido[μ3‐(pyridin‐1‐ium‐3‐yl)phosphonato‐κ3O:O′:O′′]zinc(II)]

Coordination polymers are constructed from two basic components, namely metal ions, or metal‐ion clusters, and bridging organic ligands. Their structures may also contain other auxiliary components, such as blocking ligands, counter‐ions and nonbonding guest or template molecules. The choice or design of a suitable linker is essential. The new title zinc(II) coordination polymer, [Zn(C₅H₅NO₃P)Cl]_n , has been hydrothermally synthesized and structurally characterized by single‐crystal X‐ray diffraction and vibrational spectroscopy (FT–IR and FT–Raman). Additionally, computational methods have been applied to derive quantitative information about interactions present in the solid state. The compound crystallizes in the monoclinic space group C 2/c . The four‐coordinated Zn^II cation is in a distorted tetrahedral environment, formed by three phosphonate O atoms from three different (pyridin‐1‐ium‐3‐yl)phosphonate ligands and one chloride anion. The Zn^II ions are extended by phosphonate ligands to generate a ladder chain along the [001] direction. Adjacent ladders are held together via N—H…O hydrogen bonds and offset face‐to‐face π–π stacking interactions, forming a three‐dimensional supramolecular network with channels. As calculated, the interaction energy between the neighbouring ladders is −115.2 kJ mol⁻¹. In turn, the cohesive energy evaluated per asymmetric unit‐equivalent fragment of a polymeric chain in the crystal structure is −205.4 kJ mol⁻¹. This latter value reflects the numerous hydrogen bonds stabilizing the three‐dimensional packing of the coordination chains.     

The layered structure of poly­[[di‐μ‐chloro‐bis­[chloro(2‐ethyl­tetrazole‐κN4)copper(II)]]‐di‐μ‐2‐ethyl­tetrazole‐κ2N1:N4]

In the polymeric title complex, [CuCl₂(C₃H₆N₄)₂]_n, there are two ligands in the asymmetric unit. The Cu atom adopts an elongated octahedral geometry, with two 2‐ethyl­tetrazole ligands [Cu—N = 2.0037 (16) and 2.0136 (16) Å] and two Cl atoms [Cu—Cl = 2.2595 (6) and 2.2796 (6) Å] in equatorial positions. A Cl atom and a symmetry‐related 2‐ethyl­tetrazole mol­ecule [Cu—Cl = 2.8845 (8) Å and Cu—N = 2.851 (2) Å] lie in the axial positions of the octahedron. One of the two 2‐­ethyltetrazole ligands of the asymmetric unit exhibits bidentate binding to two Cu atoms through two N atoms of the tetrazole ring, whereas the other ligand is coordinated in a monodentate fashion via one tetrazole N atom. The Cu‐atom octahedra form dimer entities by sharing edges with equatorial and axial Cl atoms. The dimers are linked together through the 2‐ethyl­tetrazole ligands to form one‐dimensional polymeric zigzag chains extending along the b axis. The chains are connected into infinite layers parallel to the (10) plane via the 2‐ethyl­tetrazole ligands.     

3‐Rhoda‐1,2‐diazacyclopentanes: A Series of Novel Metallacycle Complexes Derived From CN Functionalization of Ethylene

Rh‐containing metallacycles, [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NR)₂‐]Cl; TPA=N,N,N,N‐tris(2‐pyridylmethyl)amine have been accessed through treatment of the Rh^I ethylene complex, [(TPA)Rh(η²‐CH₂CH₂)]Cl ([ 1 ]Cl) with substituted diazenes. We show this methodology to be tolerant of electron‐deficient azo compounds including azo diesters (RCO₂N?NCO₂R; R=Et [ 3 ]Cl, R=iPr [ 4 ]Cl, R=tBu [ 5 ]Cl, and R=Bn [ 6 ]Cl) and a cyclic azo diamide: 4‐phenyl‐1,2,4‐triazole‐3,5‐dione (PTAD), [ 7 ]Cl. The latter complex features two ortho‐fused ring systems and constitutes the first 3‐rhoda‐1,2‐diazabicyclo[3.3.0]octane. Preliminary evidence suggests that these complexes result from N–N coordination followed by insertion of ethylene into a [Rh]?N bond. In terms of reactivity, [ 3 ]Cl and [ 4 ]Cl successfully undergo ring‐opening using p‐toluenesulfonic acid, affording the Rh chlorides, [(TPA)Rh^III(Cl)(κ¹‐(C)‐CH₂CH₂(NCO₂R)(NHCO₂R)]OTs; [ 13 ]OTs and [ 14 ]OTs. Deprotection of [ 5 ]Cl using trifluoroacetic acid was also found to give an ethyl substituted, end‐on coordinated diazene [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NH)₂‐]⁺ [ 16 ]Cl, a hitherto unreported motif. Treatment of [ 16 ]Cl with acetyl chloride resulted in the bisacetylated adduct [(TPA)Rh^III(κ²‐(C,N)‐CH₂CH₂(NAc)₂‐]⁺, [ 17 ]Cl. Treatment of [ 1 ]Cl with AcN?NAc did not give the Rh?N insertion product, but instead the N,O‐chelated complex [(TPA)Rh^I ( κ²‐(O,N)‐CH₃(CO)(NH)(N?C(CH₃)(OCH?CH₂))]Cl [ 23 ]Cl, presumably through insertion of ethylene into a [Rh]?O bond.     

Effect of Organic Dicarboxylates with Different Rigidity on the Construction of Cobalt(II) Complexes with a Semi‐rigid Tripyridyl‐bis‐amide Ligand

Three coordination compounds with dimensions from 0D to 2D, namely, [Co(bppdca)₂(HL1)₂] ( 1 ) [Co(bppdca)(L2)(H₂O)] · 2H₂O ( 2 ) and [Co(bppdca)(L3)] · 3H₂O ( 3 ) [bppdca = N,N′‐bis(pyridine‐3‐yl)pyridine‐2,6‐dicarboxamide, H₂L1 = 2,5‐pyridinedicarboxylic acid, H₂L2 = 4,4′‐oxybisbenzoic acid, H₂L3 = 2‐carboxymethylsulfanyl nicotinic acid] were hydrothermally synthesized and structurally characterized. Single crystal X‐ray diffraction analysis reveals that complex 1 is a discrete 0D complex, in which the bppdca ligand and the H₂L1 act as the terminal groups to coordinate with the Co^II ions. In coordination polymer 2 , two bppdca ligands coordinate in anti configuration with two Co^II ions to generate a 28‐membered Co₂(bppdca)₂ loop, which is further extended into 1D ladder‐like double chain by pairs of L2 ligands. In 3 , the Co^II ions are linked by bppdca ligands to generate 1D wave‐like chain, which is further connected by the L3 to form a 2D network. Finally, the coordination compounds 1 – 3 are extended into 3D supramolecular frameworks through the hydrogen bonding interactions. The Co^II ions and the bppdca ligands in the title coordination compounds exhibit different coordination characters and conformations. The effect of organic dicarboxylates with different rigidity and length on the structures of Co^II coordination compounds was investigated. In addition, the fluorescence and electrochemical behaviors of coordination compounds 1 – 3 were reported.     

Polymerization of 3‐ethynylthiophene with homogeneous and heterogeneous Rh catalysts

3‐Ethynylthiophene (3ETh) was polymerized with Rh(I) complexes: [Rh(cod)acac], [Rh(nbd)acac], [Rh(cod)Cl]₂, and [Rh(nbd)Cl]₂ (cod is η²:η²‐cycloocta‐1,5‐diene and nbd η²:η²‐norborna‐2,5‐diene), used as homogeneous catalysts and with the last two complexes anchored on mesoporous polybenzimidazole (PBI) beads: [Rh(cod)Cl]₂/PBI and [Rh(nbd)Cl]₂/PBI used as heterogeneous catalysts. All tested catalyst systems give high‐cis poly(3ETh). In situ NMR study of homogeneous polymerizations induced with [Rh(cod)acac] and [Rh(nbd)acac] complexes has revealed: (i) a transformation of acac ligands into free acetylacetone (Hacac) occurring since the early stage of polymerization, which suggests that this reaction is part of the initiation, (ii) that the initiation is rather slow in both of these polymerization systems, and (iii) a release of cod ligand from [Rh(cod)acac] complex but no release of nbd ligand from [Rh(nbd)acac] complex during the polymerization. The stability of diene ligand binding to Rh‐atom in [Rh(diene)acac] catalysts remarkably affects only the molecular weight but not the yield of poly(3ETh). The heterogeneous catalyst systems also provide high‐cis poly(3ETh), which is of very low contamination with catalyst residues since a leaching of anchored Rh complexes is negligible. The course of heterogeneous polymerizations is somewhat affected by limitations arising from the diffusion of monomer inside catalyst beads. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2776–2787, 2008     

A cadmium(II) coordination polymer with both polyrotaxane and polycatenane features constructed by a V‐shaped semi‐rigid ligand: synthesis and fluorescence properties

One of the most interesting phenomena in coordination polymers (CPs) is the co‐existence of different interlaced motifs. However, CPs having two different interlaced motifs at the same time are still rare. Colourless block‐shaped crystals of the two‐dimensional polymer poly[[aqua(μ₂‐naphthalene‐2,6‐dicarboxylato){μ₂‐4,4′‐[oxybis(4,1‐phenylene)]dipyridine}cadmium(II)] monohydrate], {[Cd(C₁₂H₆O₄)(C₂₂H₁₆N₂O)(H₂O)]·H₂O}_n , (I), was synthesized under hydrothermal conditions by the self‐assembly of 4,4′‐[oxybis(4,1‐phenylene)]dipyridine (OPY) with Cd^II in the presence of naphthalene‐2,6‐dicarboxylic acid (H₂ndc). Each Cd^II ion is six‐coordinated by two N atoms from the pyridine rings of two OPY ligands and by four O atoms, three of which are from two ndc²⁻ ligands and one of which is from a water molecule. In (I), every two identical two‐dimensional (2D) 6³ layers are interpenetrated in a parallel fashion, resulting in an interesting 2D→2D framework with both polyrotaxane and polycatenane characteristics. The extension of these sheets into a three‐dimensional supramolecular net is via O—H…O hydrogen bonds. The solid‐state photoluminescence properties of (I) are also discussed.     

A tubular one‐dimensional polymer constructed from alternating clusters of europium(III)–water and copper(I) chloride bridged by 4‐(pyridin‐4‐yl)benzoate

A new 3d–4f heterometallic polymer, poly[[aqua‐μ₃‐chlorido‐[μ₃‐4‐(pyridin‐4‐yl)benzoato]tris[μ₂‐4‐(pyridin‐4‐yl)benzoato]dicopper(I)erbium(III)] dihydrate], {[Cu₂Er(C₁₂H₈NO₂)₄Cl(H₂O)]·2H₂O}_n, was synthesized by the hydrothermal reaction of Er₂O₃, CuCl₂·2H₂O and 4‐(pyridin‐4‐yl)benzoic acid in the presence of HClO₄. The asymmetric unit contains one Er³⁺ cation, two Cu⁺ cations, one Cl⁻ anion, four deprotonated 4‐(pyridin‐4‐yl)benzoate ligands, one coordinated aqua ligand and two solvent water molecules. This tubular one‐dimensional polymer is constructed from alternating clusters of europium(III)–water and copper(I) chloride bridged by 4‐(pyridin‐4‐yl)benzoate ligands. Extensive hydrogen‐bonding interactions involving both the coordinated and the solvent water molecules provide further stabilization to the structure.     

Electronic Spectra of Ruthenium Nitrosyl Complexes with Macrocyclic Ligands

Electronic spectra of ruthenium(II) nitrosyl complexes [Ru(NO)(salen)(X)]⁴ⁿ (X = Cl, H₂O; n = 0, 1) and [Ru(NO)(P)(ONO)] with tetradentate -conjugated ligands N,N'-ethylenebis(salicylideniminato) dianion (salen) and porphinate dianion (P) were calculated by the TD DFT and CINDO/CI methods. The data obtained were compared to the results of previous calculations of the spectra of trans-[Ru(NO)(NH₃)₄(L)]^{3 +} complexes with nitrogen-containing heterocyclic ligands L. It was found that charge-transfer transitions to * orbitals of the RuNO group dominate in the long-wave part of the spectrum irrespective of the other ligands.     

Three isotypic polymeric complexes with rare earth cations,but‐2‐enoate anions and 4,4′‐(ethane‐1,2‐diyl)dipyridine and 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligands

Three isotypic rare earth complexes, catena‐poly[[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐bis(μ‐but‐2‐enoato)‐κ³O,O′:O;κ³O:O,O′‐[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐μ‐4,4′‐(ethane‐1,2‐diyl)dipyridine‐κ²N:N′], [Y₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], the gadolinium(III) analogue, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], and the gadolinium(III) analogue with a 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligand, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₀N₂)(H₂O)₂], are one‐dimensional coordination polymers made up of centrosymmetric dinuclear [M(but‐2‐enoato)₃(H₂O)]₂ units (M = rare earth), further bridged by centrosymmetric 4,4′‐(ethane‐1,2‐diyl)dipyridine or 4,4′‐(ethene‐1,2‐diyl)dipyridine spacers into sets of chains parallel to the [20] direction. There are intra‐chain and inter‐chain hydrogen bonds in the structures, the former providing cohesion of the linear arrays and the latter promoting the formation of broad planes parallel to (010).     

Complete assignments of NMR data of salens and their cobalt (III) complexes

Salens, derived from 1,2‐ethylenediamine and salicylaldehydes, have been widely used as ligands for metal complexes which have been showing enormous potential in chemical properties of asymmetric catalysts as well as biological properties such as anticancer agents. Almost all of the salen–metal complexes with their corresponding metal (II)‐complexes show the evidences of chelation of two oxygens in salens. However, several metal (II) complexes, especially cobalt (II) complexes, could not show NMR spectra due to their paramagnetism. Recently, it has been reported that one of the cobalt (III) complexes was used for NMR spectroscopy to evaluate its stereoselectivity as a catalyst. Even though many salen ligands are known, their NMR data are not assigned completely. It was possible that modification in northern part of salen with 2‐hydroxyphenyl group afforded another oxygen chelation site in salen ligand. Here we report that synthesis and full NMR assignment of new salen ligands, which form meso 1,2‐bis(2‐hydroxyphenyl)ethylenediamine) and their cobalt (III) complexes. The assignments of ¹H and ¹³C NMR data obtained in this experiment can help us to predict the NMR data of other salen ligands. Copyright © 2008 John Wiley & Sons, Ltd.     

Ligand Effects on the Electronic Structure of Heteroleptic Antimony‐Centered Radicals

We report on the structures of three unprecedented heteroleptic Sb‐centered radicals [L(Cl)Ga](R)Sb^. ( 2‐R , R=B[N(Dip)CH]₂ 2‐B , 2,6‐Mes₂C₆H₃ 2‐C , N(SiMe₃)Dip 2‐N ) stabilized by one electropositive metal fragment [L(Cl)Ga] (L=HC[C(Me)N(Dip)]₂, Dip=2,6‐i‐Pr₂C₆H₃) and one bulky B‐ ( 2‐B ), C‐ ( 2‐C ), or N‐based ( 2‐N ) substituent. Compounds 2‐R are predominantly metal‐centered radicals. Their electronic properties are largely influenced by the electronic nature of the ligands R, and significant delocalization of unpaired‐spin density onto the ligands was observed in 2‐B and 2‐N . Cyclic voltammetry (CV) studies showed that 2‐B undergoes a quasi‐reversible one‐electron reduction, which was confirmed by the synthesis of [K([2.2.2]crypt)][L(Cl)GaSbB[N(Dip)CH]₂] ([K([2.2.2]crypt)][ 2‐B ]) containing the stibanyl anion [ 2‐B ]^?, which was shown to possess significant Sb?B multiple‐bonding character.     

Synthesis,Crystal Structures,and Characterization of Two 3d‐3d Heterometallic Coordination Frameworks: [ZnCo(Hcit)Cl] and [ZnCo(Hcit)Br]

Reactions between CoO, ZnCl₂ (or ZnBr₂), and molten citric acid (Hcit) led to the formation of two 3d‐3d heterometallic coordination frameworks: [ZnCo(Hcit)Cl] ( 1 ) and [ZnCo(Hcit)Br] ( 2 ). X‐ray structure analyses show that both compounds 1 and 2 crystallize in the monoclinic space group P2₁/n [ 1 : a = 5.8699(5) Å, b = 17.7963(13) Å, c = 9.2152(8) Å, β = 106.806(4) °, Z = 4, V = 921.53(13) Å³; 2 : a = 5.909(3) Å, b = 17.798(8) Å, c = 9.302(5) Å, β = 106.374(7) °, Z = 4, V = 938.6(8) Å³]. The structures of the two compounds are almost the same except for the terminal halogen ligand. Both of them are 3D frameworks based on citric acid bridging ligands and a 1D backbone chain built of corner‐shared {CoO₆} and {ZnO₃Cl} polyhedra. Photoluminescence and thermal stabilities of the compounds were studied.     

An Interwoven Metal‐Organic Framework Combining Mechanically Interlocked Linkers and Interpenetrated Networks

New dibenzo[24]crown‐8 ether derivatives were prepared that contain appendages with thioether donors that can coordinate to a metal ion. These macrocycles were then combined with 1,2‐bis(pyridinium) ethane axles to create two types of [2]rotaxane ligands; those with the four thioether donors on the crown ether and those with six donor groups, four from the crown ether and two more attached to the stoppering groups of the dumbbell. The crown ethers and both types of [2]rotaxane ligands were allowed to react with Ag^I ions to form metal‐organic rotaxane framework (MORF) style coordination polymers. The interlocked hexadentate ligand forms the first example of a new type of lattice containing interwoven frameworks resulting from both interpenetration of frameworks due to the presence of an interlocked ligand and more classical interpenetration of independent frameworks.     

A new one‐dimensional cadmium(II) coordination polymer incorporating 4‐[4‐(1H‐imidazol‐1‐yl)phenyl]pyridine and 5‐hydroxybenzene‐1,3‐dicarboxylate ligands

The design and synthesis of new organic lgands is important to the rapid development of coordination polymers (CPs). However, CPs based on asymmetric ligands are still rare, mainly because such ligands are usually expensive and more difficult to synthesize. The new asymmetric ligand 4‐[4‐(1H‐imidazol‐1‐yl)phenyl]pyridine (IPP) has been used to construct the title one‐dimensional coordination polymer, catena‐poly[[[aqua{4‐[4‐(1H‐imidazol‐1‐yl‐κN³)phenyl]pyridine}cadmium(II)]‐μ‐5‐hydroxybenzene‐1,3‐dicarboxylato‐κ³O¹,O^1′:O³] monohydrate], {[Cd(C₈H₄O₅)(C₁₄H₁₁N₃)₂(H₂O)]·H₂O}_n, under hydrothermal reaction of IPP with Cd^II in the presence of 5‐hydroxyisophthalic acid (5‐OH‐H₂bdc). The Cd^II cation is coordinated by two N atoms from two distinct IPP ligands, three carboxylate O atoms from two different 5‐OH‐bdc²⁻ dianionic ligands and one water O atom in a distorted octahedral geometry. The cationic [Cd(IPP)₂]²⁺ nodes are linked by 5‐OH‐bdc²⁻ ligands to generate a one‐dimensional chain. These chains are extended into a two‐dimensional layer structure via O—H…O and O—H…N hydrogen bonds and π–π interactions.     

Synthesis of Chlorotitanium(IV) Schiff‐Base Complexes and their Application to Styrene Polymerization

Summary: A [TiCl₂(salen)] complex and its derivatives with the formula [TiCl₂(L)] [L = salen(tBu), salen(di‐Me), salen(di‐tBu), salen(Me)] were synthesized in high yield by reacting the Schiff‐base ligands with TiCl₄. [TiCl₂{salen(tBu)}] and [TiCl₂{salen(di‐tBu)}] have been characterized by single‐crystal X‐ray diffraction. Styrene polymerizations carried out with [TiCl₂(salen)] and its derivatives co‐catalyzed by MAO yielded syndiotactic polystyrenes. The catalytic activity and syndiospecificity were dependent on the bulkiness of the ortho substituents in the aryl ring of ligand.