Photo‐/Baso‐Chromisms and the Application of a Dual‐Addressable Molecular Switch

Two typical molecular switches of spiropyran (SP) and benzoxazine (OX) were fused by sharing an indole to achieve a new dual‐addressable molecular switch (SP‐OX‐NO₂). Through proper molecular modification with NO₂, the transformation from merocyanine (MC) to ring‐closed SP or ring‐closed OX can be controlled separately with visible light or base stimuli in solution, respectively, and these processes are verified by UV‐vis and NMR spectroscopy as well as control experiments. The cis‐merocyanine (cis‐MC) form is involved in the basochromic process in solution. DFT calculation suggests that the bidirectional switching property of the fused SP‐OX molecular switch can be controlled separately, when the OX isomer is more stable than the deprotonated SP isomer. Because of the significant color variations in solution, the simple dual‐addressable switch has been further successfully applied to construct a multicolor reversible display on paper.     

Conductance Photoswitching of Metal–Organic Frameworks with Embedded Spiropyran

Conductive metal–organic frameworks (MOFs) as well as smart, stimuli‐responsive MOF materials have attracted considerable attention with respect to advanced applications in energy harvesting and storage as well as in signal processing. Here, the conductance of MOF films of type UiO‐67 with embedded photoswitchable nitro‐substituted spiropyrans was investigated. Under UV irradiation, the spiropyran (SP) reversibly isomerizes to the open merocyanine (MC) form, a zwitterionic molecule with an extended conjugated π‐system. The light‐induced SP–MC isomerization allows for remote control over the conductance of the SP@UiO‐67 MOF film, and the conductance can be increased by one order of magnitude. This research has the potential to contribute to the development of a new generation of photoelectronic devices based on smart hybrid materials.     

Synthesis of optically active N‐protected α‐aminoketones and α‐amino alcohols

A series of optically active N‐protected α‐aminoketones were synthesized via the Grignard reaction of the Weinreb amides of the N‐tert‐butoxycarbonyl amino acids. Reduction of the α‐aminoketones by sodium borohydride resulted in the corresponding 1,2‐amino alcohols. © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:603–606, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10195     

Spiropyran‐Conjugated Pluronic as a Dual Responsive Colorimetric Detector

Novel spiropyran‐conjugated Pluronic [polyethylene oxide (PEO)‐b‐polypropylene oxide (PPO)‐b‐polyethylene oxide (PEO)] micelles are developed as a new colorimetric detector showing photo‐ or thermo‐switchable behavior. Facile conjugation of spiropyran to Pluronic was confirmed by ¹H NMR, UV–Vis, and Fluorescence spectroscopy. A switchable photoluminescence is found depending on the irradiation with either UV or visible light, and temperature resulting from structural isomerization of spiropyran between spiropyran (SP) and merocyanine (MC) form. Cytotoxicity of the spiropyran‐conjugated Pluronic (SP‐PL) was evaluated following an MTT assay, whereas photo responsiveness of spiropyran within the micelles was determined by confocal laser scanning microscopy.     

Spiropyran Main‐Chain Conjugated Polymers

The first main‐chain conjugated copolymers based on alternating spiropyran (SP) and 9,9‐dioctylfluorene (F8) units synthesized via Suzuki polycondensation (SPC) are presented. The reaction conditions of SPC are optimized to obtain materials of type P(para‐SP‐F8) with appreciably high molecular weights up to M _w ≈ 100 kg mol⁻¹. ¹³C NMR is used to identify the random orientation of the non‐symmetric SP unit in P(p‐SP‐F8). Ultrasound‐induced isomerization of P(p‐SP‐F8) to the corresponding merocyanine form P(p‐MC‐F8) yields a deep‐red solution. This isomerization reaction is followed by ¹H NMR in solution using sonication, whereby the color increasingly changes to deep red. The possibility to incorporate multiple SP units into main‐chain polymers significantly broadens existing SP‐based polymeric architectures.     

Enantioselective Synthesis of α‐Hydroxy Amides and β‐Amino Alcohols from α‐Keto Amides

Synthesis of enantiomerically enriched α‐hydroxy amides and β‐amino alcohols has been accomplished by enantioselective reduction of α‐keto amides with hydrosilanes. A series of α‐keto amides were reduced in the presence of chiral Cu^II/(S)‐DTBM‐SEGPHOS catalyst to give the corresponding optically active α‐hydroxy amides with excellent enantioselectivities by using (EtO)₃SiH as a reducing agent. Furthermore, a one‐pot complete reduction of both ketone and amide groups of α‐keto amides has been achieved using the same chiral copper catalyst followed by tetra‐n‐butylammonium fluoride (TBAF) catalyst in presence of (EtO)₃SiH to afford the corresponding chiral β‐amino alcohol derivatives.     

Photo‐switchable spiropyran immobilized polystyrene beads using catechol chemistry

Catechol and spiropyran functional groups were conjugated to a polymer backbone, allowing immobilization on polystyrene beads (PS beads). The final product was capable of stably reproducing the optical properties of spiropyran. Through the outstanding surface adhesion properties of the catechol functional group, spiropyran was immobilized on PS beads. Switchable photoluminescence in the spiropyran coated PS bead surfaces was observed depending on irradiation with either UV or visible light. The surfaces of the PS beads were morphologically examined by field emission scanning electron microscopy and X‐ray photoelectron spectroscopy was used for characterization of the constituent atoms. Furthermore, UV–Vis and fluorescence spectroscopy were used to confirm conversion between the spiropyran (SP) and merocyanine (MC) forms through UV or visible light irradiation on SP, while fluorescent images for both SP and MC were studied using confocal laser scanning microscopy. The confocal images of the SP‐PS beads system onto MDAMB‐231 cells under UV and visible light indicate the cellular uptake by emerging color within the cytoplasm. Advancing study, the remaining catechol groups can confers adhesive properties, given by contact angle data of various coated surfaces film. These stimuli‐responsive coatings are compatible as drawing switchable photochromic material on versatile substrate shown in confocal images of propylene film. Overall, this great water solubility and biocompatibility PS beads system also showed potential as cell bio‐imaging light stimuli responsive material, and the benefits of this system can also possibly address coat able advanced material for a wide range of surface light sensor applications. Copyright © 2017 John Wiley & Sons, Ltd.     

NiH‐Catalyzed Remote Asymmetric Hydroalkylation of Alkenes with Racemic α‐Bromo Amides

Reported here is a terminal‐selective, remote asymmetric hydroalkylation of olefins with racemic α‐bromo amides. The reaction proceeds by NiH‐catalyzed alkene isomerization and subsequent alkylation reaction, and can enantioconvergently introduce an unsymmetrical secondary alkyl group from a racemic α‐bromo amide onto a terminal C(sp³)?H position along the hydrocarbon chain of the alkene. This mild process affords a range of structurally diverse chiral α‐alkylalkanoic amides in excellent yields, and high regio‐ and enantioselectivities. In addition, the synthetic utility of this protocol is further highlighted by the regioconvergent conversion of industrial raw materials of isomeric olefin mixtures into enantioriched α‐alkylalkanoic amides on large scale.     

Self‐Assembled Cyclic d,l‐α‐Peptides as Generic Conformational Inhibitors of the α‐Synuclein Aggregation and Toxicity: In Vitro and Mechanistic Studies

Many peptides and proteins with large sequences and structural differences self‐assemble into disease‐causing amyloids that share very similar biochemical and biophysical characteristics, which may contribute to their cross‐interaction. Here, we demonstrate how the self‐assembled, cyclic d,l ‐α‐peptide CP‐2 , which has similar structural and functional properties to those of amyloids, acts as a generic inhibitor of the Parkinson′s disease associated α‐synuclein (α‐syn) aggregation to toxic oligomers by an ?off‐pathway“ mechanism. We show that CP‐2 interacts with the N‐terminal and the non‐amyloid‐β component region of α‐syn, which are responsible for α‐syn′s membrane intercalation and self‐assembly, thus changing the overall conformation of α‐syn. CP‐2 also remodels α‐syn fibrils to nontoxic amorphous species and permeates cells through endosomes/lysosomes to reduce the accumulation and toxicity of intracellular α‐syn in neuronal cells overexpressing α‐syn. Our studies suggest that targeting the common structural conformation of amyloids may be a promising approach for developing new therapeutics for amyloidogenic diseases.     

From α‐carbamoyl‐α‐cyano­oxiranes to 3‐halogenopyruv­amides

The crystal structures of the first stable α‐diol from the α‐halogenopyruv­amide series, 3‐chloro‐2,2‐di­hydroxy‐3‐phenyl­propan­amide, C₉H₁₀­ClNO₃, and three products [3‐(4‐chloro­phenyl)‐2‐cyano‐2,3‐epoxy­propan­amide, C₁₀H₇­ClN₂O₂, 3‐bromo‐2‐cyano‐2‐hydroxy‐3‐p‐tolyl­propan­amide, C₁₁H₁₁Br­N₂O₂, 3‐bromo‐2‐oxo‐3‐p‐tolyl­propan­amide, C₁₀H₁₀­BrNO₂] obtained during the systematic synthesis of α‐halogenopyruv­amides are reported. The crystal structures are dominated by hydrogen bonds involving an amide group. The stability of the geminal diol could be ascribed to hydrogen bonds which involve both hydroxyl groups.     

Activation of α‐Diazocarbonyls by Organic Catalysts: Diazo Group Acting as a Strong N‐Terminal Electrophile

For the first time α‐diazocarbonyls have been used as highly active N‐terminal electrophiles in the presence of bicyclic amidine catalysts. The C? N bond‐forming reactions of active methylene compounds as C nucleophiles with α‐diazocarbonyls as N‐terminal electrophiles proceed quickly under ambient conditions, in the presence of 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU), because of the formation of the reactive N‐terminal electrophilic intermediates. DBU activates both the active methylene and α‐diazocarbonyl. Importantly, this reaction is general for both active methylenes and α‐diazocarbonyls, and the activation mode will lead to new synthetic applications of α‐diazocarbonyls.     

Hydrogen‐bonded supramolecular polymers from derivatives of α‐amino‐ε‐caprolactam: A bio‐based material

Hydrogen‐bonded supramolecular polymers were prepared from the derivatives of α‐amino‐ε‐caprolactam (ACL), obtained from a renewable resource. Several self‐complimentary bis‐ or tetra‐caprolactam monomers were synthesized by varying the number of carbons of the spacer between the hydrogen‐bonding end groups. Physical properties of these hydrogen‐bonded polymers were clearly demonstrated by differential scanning colorimetry, solid‐state NMR, and X‐ray powder diffraction analyses. The supramolecular behavior was also supported by fiber formation from the melt for several of these compounds, and stable glassy materials were prepared from the physical mixtures of two different biscaprolactams. The self‐association ability of ACL was also used by incorporating ACL at the chain ends of low‐molecular weight Jeffamine (M_n = 900 g/mol) using urea and amide linkages. The transformation of this liquid oligomer at room temperature into a self‐standing, transparent film clearly showed the improvement in mechanical properties obtained by the introduction of terminal hydrogen‐bonding groups. Finally, the use of monomers with a functionality of four gave rise to network formation either alone or combination with bifunctional monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

A One‐Pot O‐Phosphinative Passerini/Pudovik Reaction: Efficient Synthesis of Highly Functionalized α‐(Phosphinyloxy)amide Derivatives

A one‐pot O‐phosphinative Passerini/Pudovik reaction has been developed, based on reacting aldehydes, isocyanides, and phosphinic acids followed by the addition of second aldehydes to form the corresponding α‐(phosphinyloxy)amide derivatives. This is the first reported instance of a Passerini‐type, isocyanide‐based multicomponent reaction using a phosphinic acid instead of a carboxylic acid. The nucleophilicity of the phosphinate group allows a subsequent catalytic Pudovik‐type reaction, affording the highly functionalized α‐(phosphinyloxy)amide derivative in high yield. A wide range of aldehydes and isocyanides are applicable to this reaction.     

Liquid chromatographic resolution of proline and pipecolic acid derivatives on chiral stationary phases based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid

Two liquid chromatographic chiral stationary phases based on (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid were applied to the resolution of the amide derivatives of cyclic α‐amino acids including proline and pipecolic acid. Among the five amide derivatives of proline, aniline amide was resolved best on the first chiral stationary phase, which contains two N–H tethering amide groups, with the separation factor of 1.31 and the resolution of 2.60, and on the second chiral stationary phase, which contains two N–CH₃ tethering amide groups, with the separation factor of 1.57 and the resolution of 5.50. Among the five amide derivatives of pipecolic acid, 2‐naphthyl amide was resolved best on the first chiral stationary phase with the separation factor of 1.30 and the resolution of 1.75, but 1‐naphthylmethyl amide was resolved best on the second chiral stationary phase with the separation factor of 1.30 and the resolution of 2.26. In general, the second chiral stationary phase was found to be better than the first chiral stationary phase in the resolution of the amide derivatives of cyclic α‐amino acids. In this study, the second chiral stationary phase was first demonstrated to be useful for the resolution of secondary amino compounds.     

Synthesis and antiproliferative activity of (Z + E)‐1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐hydroxyphenyl)‐but‐1‐ene against breast cancer cells

This paper describes the synthesis of (Z + E)‐1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐hydroxyphenyl)‐but‐1‐ene. Two synthetic pathways were explored. The best pathway consisted of the alkylation of 1,2‐bis‐[4‐(tert‐butyl‐dimethylsilyloxy)phenyl]‐1‐(4‐hydroxyphenyl)but‐1‐ene with BrCH₂COOEt. The ester obtained was transformed into the Weinreb amide by reaction with HN(OMe)Me–HCl. The reaction of lithium manganese tricarbonylcyclopentadienide with the Weinreb amide produced 1‐[4‐(2‐(cyclopentadienyltricarbonylmanganese)‐2‐oxo‐ethoxy)phenyl]‐1,2‐di(p‐tert‐butyldimethylsiloxyphenyl)‐but‐1‐ene. The deprotection of phenolic functions of the latter compound led to the formation of the final compound. The Z and E isomers could be separated but the isomerization of these isomers from one to another is an easy process. The Z + E compound 2 was tested against the hormone‐dependent MCF‐7 and hormone‐independent MDA‐MB‐231 breast cancer cell lines. The IC₅₀ values of compound 2 were 4.80 ± 2.00 µm and 4.79 ± 0.70 µm for MCF‐7 cells and MDA‐MB‐231 cells, respectively, which was three times better than the ferrocenyl analogue. Copyright © 2012 John Wiley & Sons, Ltd.     

Conformational analysis of the disaccharide methyl α‐d‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d‐mannopyranoside monohydrate

The crystal structure of methyl α‐d ‐mannopyranosyl‐(1→3)‐2‐O‐acetyl‐β‐d ‐mannopyranoside monohydrate, C₁₅H₂₆O₁₂·H₂O, ( II ), has been determined and the structural parameters for its constituent α‐d ‐mannopyranosyl residue compared with those for methyl α‐d ‐mannopyranoside. Mono‐O‐acetylation appears to promote the crystallization of ( II ), inferred from the difficulty in crystallizing methyl α‐d ‐mannopyranosyl‐(1→3)‐β‐d ‐mannopyranoside despite repeated attempts. The conformational properties of the O‐acetyl side chain in ( II ) are similar to those observed in recent studies of peracetylated mannose‐containing oligosaccharides, having a preferred geometry in which the C2—H2 bond eclipses the C=O bond of the acetyl group. The C2—O2 bond in ( II ) elongates by ～0.02 Å upon O‐acetylation. The phi (?) and psi (ψ) torsion angles that dictate the conformation of the internal O‐glycosidic linkage in ( II ) are similar to those determined recently in aqueous solution by NMR spectroscopy for unacetylated ( II ) using the statistical program MA′AT, with a greater disparity found for ψ (Δ = ～16°) than for ? (Δ = ～6°).     

Highly Enantioselective Synthesis of 1,2,3‐Substituted Cyclopropanes by Using α‐Iodo‐ and α‐Chloromethylzinc Carbenoids

Herein, we report the enantio‐ and diastereoselective formation of trans‐iodo‐ and trans‐chlorocyclopropanes from α‐iodo‐ and α‐chlorozinc carbenoids by using a dioxaborolane‐derived chiral ligand. The synthetically useful iodocyclopropane building blocks were derivatized by an electrophilic trapping of the corresponding cyclopropyl lithium species or a Negishi coupling to give access to a variety of enantioenriched 1,2,3‐substituted cyclopropanes. The synthetic utility of this method was demonstrated by the formal synthesis of an HIV‐1 protease inhibitor. In addition, the related stereoselective bromocyclopropanation was also investigated. New insights about the relative electrophilicity of haloiodomethylzinc carbenoids are also presented.     

α‐d‐Glucofuranose and α‐d‐allofuranose diacetonides and silyl ether of α‐d‐glucofuranose diacetonide in dithiophosphorylation reactions

α‐d ‐Glucofuranose and α‐d ‐allofuranose diacetonides react with 2,4‐diorganyl 1,3,2,4‐dithiadiphosphetane‐2,4‐disulfides to form optically active dithiophosphonates in 78–81% yields, which are transformed into the corresponding ammonium salts in 90–97% yields by the treatment of n‐hexadecylamine. The S‐silyldithiophosphonate was prepared in 93% yield by the reaction of 2,4‐bis(butoxyphenyl) 1,3,2,4‐dithiadiphosphetane‐2,4‐disulfide with silyl ether of α‐d ‐glucofuranose diacetonide. One of the salts obtained possesses antibacterial activity against Staphylococcus aureus ATCC 6538‐P.     

Three‐phase hollow‐fiber microextraction combined with ion‐pair high‐performance liquid chromatography for the simultaneous determination of five components of compound α‐ketoacid tablets in human urine

The determination of α‐ketoacid concentration is demanded to evaluate the absorption and metabolic behavior of compound α‐ketoacid tablets taken by chronic kidney disease patients. To eliminate the interference of endogenous substance of urine and enrich the analytes, a three‐phase hollow‐fiber liquid‐phase microextraction combined with ion‐pair high‐performance liquid chromatography method was established for the determination of d ,l ‐α‐hydroxymethionine calcium, d ,l ‐α‐ketoisoleucine calcium, α‐ketovaline calcium, α‐ketoleucine calcium, and α‐ketophenylalanine calcium of compound α‐ketoacid tablets in human urine samples. The extraction parameters, such as organic solvent, pH of donor phase and acceptor phase, stirring rate, and extraction time were optimized. Under the optimal conditions, the obtained enrichment factors were up to 11‐, 110‐, 198‐, 202‐, and 50‐fold, respectively. The calibration curves for these analytes were linear over the range of 0.1–10 mg/L for α‐ketovaline calcium, d ,l ‐α‐ketoisoleucine calcium, and α‐ketoleucine calcium, 0.5–10 mg/L for d ,l ‐α‐hydroxymethionine calcium, and α‐ketophenylalanine calcium with r > 0.99. The relative standard deviations (n = 5) were less than 6.27% and the LODs were 100.7, 10.0, 5.8, 7.8, and 8.6 μg/L (based on S/N = 3), respectively. Good recoveries from spiked urine samples (92–118%) were obtained. The proposed method demonstrated excellent sample clean‐up and analytes enrichment to determine the five components in human urine.     

Synthesis of 3,3‐Dimethylglutamic Acid Derivatives as DPP‐IV Inhibitors and Evaluation of Their Chemical Stability

A novel five‐step synthesis of Boc‐3,3‐dimethylglutamic acid α‐ethyl ester 11 is reported. All the steps are high yielding and simple to carry out. By use of the 3,3‐dimethylglutamic acid building block, we successfully discovered a novel class of DPP‐IV inhibitors, Glu‐Pro‐Nitrile dipeptide mimics 2 , with high potency (IC₅₀ < 40 nM). The consequence of 3,3‐dimethyl substituent on the rate of intramolecular cyclization between N‐terminal amine and 5‐position amide bond in different buffer solutions was also evaluated.