Integrative Self‐Sorting: One‐Pot Synthesis of a Hetero[4]rotaxane from a Daisy‐Chain‐Containing Hetero[4]pseudorotaxane

The structural complexity of mechanically interlocked molecules are very attractive to chemists owing to the challenges they present. In this article, novel mechanically interlocked molecules with a daisy‐chain‐containing hetero[4]rotaxane motif were efficiently synthesized. In addition, a novel integrative self‐sorting strategy is demonstrated, involving an ABB‐type (A for host, dibenzo‐24‐crown‐8 (DB24C8), and B for guest, ammonium salt sites) monomer and a macrocycle host, benzo‐21‐crown‐7 (B21C7), in which the assembled species in hydrogen‐bonding‐supported solvent only includes a novel daisy‐chain‐containing hetero[4]pseudorotaxane. The found self‐sorting process involves the integrative recognition between B21C7 macrocycles and carefully designed components simultaneously containing two types of secondary ammonium ions and a host molecule, DB24C8 crown ether. The self‐sorting strategy is integrative to undertake self‐recognition behavior to form one single species of pseudorotaxane compared with the previous report. This self‐sorting system can be used for the efficient one‐pot synthesis of a daisy‐chain‐containing hetero[4]rotaxane in a good yield. The structure of hetero[4]rotaxane was confirmed by ¹H NMR spectroscopy and high‐resolution electrospray ionization (HR‐ESI) mass spectrometry.     

Complexation between Methyl Viologen (Paraquat) Bis(Hexafluorophosphate) and Dibenzo[24]Crown‐8 Revisited

Paraquat bis(hexafluorophosphate) undergoes stepwise dissociation in acetone. All three species—the neutral molecule, and the mono‐ and dications—are represented significantly under the experimental conditions typically used in host–guest binding studies. Paraquat forms at least four host–guest complexes with dibenzo[24]crown‐8. They are characterized by both 1:1 and 1:2 stoichiometries, and an overall charge of either zero (neutral molecule) or one (monocation). The monocationic 1:1 host–guest complex is the most abundant species under typical (0.5–20 mM ) experimental conditions. The presence of the dicationic 1:1 host–guest complex cannot be excluded on the basis of our experimental data, but neither is it unambiguously confirmed to be present. The two confirmed forms of paraquat that do undergo complexation—the neutral molecule and the monocation—exhibit approximately identical binding affinities toward dibenzo[24]crown‐8. Thus, the relative abundance of neutral, singly, and doubly charged pseudorotaxanes is identical to the relative abundance of neutral, singly, and doubly charged paraquat unbound with respect to the crown ether in acetone. In the specific case of paraquat/dibenzo[24]crown‐8, ion‐pairing does not contribute to host–guest complex formation, as has been suggested previously in the literature.     

Enantiomeric Separations in Capillary Electrochromatography with Crown Ether‐Capped β‐Cyclodextrin‐Bonded Silica Particles as Chiral Stationary Phase

Two novel types of crown ether capped β‐cyclodextrin (β‐CD) bonded silica, namely, 4′‐aminobenzo‐X‐crown‐Y (X=15, 18 and Y=5, 6, resp.) capped [3‐(2‐O‐β‐cyclodextrin)‐2‐hydroxypropoxy] propylsilyl‐appended silica, have been prepared and used as stationary phases in capillary electrochromatography (CEC) to separate chiral compounds. The two stationary phases have a chiral selector with two recognition sites: crown ether and β‐CD. They exhibit excellent enantioselectivity in CEC for a wide range of compounds. After inclusion of metal ions (Na⁺ or K⁺) from the running buffer into the crown ether units, the stationary phases become positively charged and can provide extra electrostatic interaction with ionizable solutes and enhance the dipolar interaction with polar neutral solutes. This enhances the host‐guest interaction with the solute and improves chiral recognition and enantioselectivity. Due to the cooperation of the anchored β‐CD and the crown ether, this kind of crown ether capped β‐CD bonded phase shows better enantioselectivity than either β‐CD‐ or crown ether bonded phases only. These new types of stationary phases have good potential for fast chiral separation with CEC.     

Crystal Structures and Redox Responses Coupled with Ion Recognition of p‐Benzoquinone‐ and Hydroquinone‐Fused [18]crown‐6

The crystal structures and redox properties of p‐benzoquinone (BQ)‐fused [18]crown‐6 1 and bis‐BQ‐fused [18]crown‐6 2 were examined. The anion radicals of these BQ molecules were stabilized by addition of metal ions, through effective electrostatic interactions between the negatively charged BQ moiety and positively charged ion‐capturing [18]crown‐6 unit. The electrostatic interactions and solvation energy played important roles in determining the magnitudes of anodic redox shifts in the reduction potentials. Regular π‐stacking of BQ units and regular arrays of [18]crown‐6 units were observed in crystal 2 , in which one‐dimensional π‐electron columns were separated by ionic channels. The hydroquinone‐fused [18]crown‐6 molecule 3 and a new BQ‐ and phenol‐fused [18]crown‐6 derivative 4 were obtained as single crystals. The molecular conformations of [18]crown‐6 in crystal 3 and hydrated crystal 3 ?H₂O were different from each other.     

Synthesis of dibenzo‐16‐crown‐5 compounds with pendant ester and ether groups

Structurally related dibenzo‐16‐crown‐5 lariat ethers with pendant ester and ether groups are prepared. Structural variations within the series of alkyl lariat ether esters include changes in the O‐alkyl group, attachment site and nature of the lipophilic group, and length of the spacer, which connects the ester group to the polyether framework. Also synthesized are bis(crown ether) diesters with two dibenzo‐16‐crown‐5 or two dicyclohexano‐16‐crown‐5 units and two ester groups connected to each other by a linker of varying length. Synthetic strategies for the preparation of these lariat ethers with pendant ester‐ and ether‐containing side arms are described.     

Asararenes—A Family of Large Aromatic Macrocycles

We announce the establishment of a new family of macrocycles—the asararenes, which are based on para‐methylene linked “asarol methyl ether” (1,2,4,5‐tetramethoxybenzene) units. Macrocycles with 6–12 aromatic units have been synthesized and isolated in a single step from asarol methyl ether and paraformaldehyde. Even larger rings, with up to 15 asarol methyl ether units, have been observed by high‐resolution mass spectrometry. Single‐crystal X‐ray structures of asar[6]‐, asar[7]‐, asar[8]‐, asar[9]‐, asar[10]‐ and asar[11]arene highlight the diverse structural features of this family of macrocycles. While the cavities of the asar[6–8]arene macrocycles are mostly filled with methoxyl groups, the asar[9]‐ and asar[10]arene rings contain accessible cavities and self‐assemble into infinite channels filled with solvent molecules in the solid state. These solid‐state structures highlight the potential of this family of macrocycles for a wide range of potential applications.     

Construction of Crown Ether‐Stoppering [3]Rotaxanes Based on N‐Hetero Crown Ether Host

Crown ether usually plays the role of macrocyclic host in supramolecular chemistry, but here the crown ether is also utilized as the stoppers in rotaxanes. In this work, we designed and synthesized two [3]rotaxanes containing four crown ether components by using an approach of template‐directed clipping reaction, of which, two crown ether components were employed as the macrocyclic hosts to assemble the mechanically interlocked framework while another two crown ether units located on the two ends of ammonium template acting as the stoppering groups of rotaxanes. Their self‐assembling process was monitored by the ¹H NMR and one of the single crystal structures of [3]rotaxane was obtained.     

Strukturen der Alkalimetallsalze aromatischer,heterocyclischer Amide: Synthese und Struktur von Kronenether‐Addukten der Alkalimetall‐indolide

Structures of Alkali Metal Salts of Aromatic, Heterocyclic Amides: Synthesis and Structure of Crown Ether Adducts of the Alkali Metal Indolides The synthesis of five alkali metal indolide crown ether complexes is reported. Lithium‐indolide(12‐crown‐4) ( 1 ) was synthezised from butyllithium, indole, and 12‐crown‐4; sodium‐indolide(15‐crown‐5) ( 2 ) from sodium metal, indole, and 15‐crown‐5; potassium‐indolide(18‐crown‐6) ( 3 ) from potassium hydride, indole, and 18‐crown‐6. Rubidium‐ and cesium‐indolide(18‐crown‐6) ( 4 , 5 ) were made from Rb‐ and Cs‐hexamethyldisilazide, indole, and 18‐crown‐6. The structures of 2 , 4 , and 5 could be determined by X‐ray diffraction. The complexes 2 and 4 are mononuclear, the indolide anion shows an η¹(N)‐coordination to the metal cation. Complex 5 is dinuclear with a central [Cs—N—]₂‐ring.     

Novel Cesium‐Selective Electrodes Based on Lipophilic 1,3‐Bisbridged Cofacial‐calix[6]crowns

Five bisbridged calix[6]crowns have been investigated as Cs⁺ ionophore in PVC membrane electrodes. As ionophores, three 1,3‐bisbridged calix[6]crown‐4‐ethers( I–III ), 1,3‐bisbridged calix[6]crown‐5‐ether( IV ), and 1,3‐bisbridged calix[6]crown‐6‐ether( V ) have been evaluated. The membranes all give good Nernstian response in the concentration range from 1×10^?7 to 1×10^?1 M of cesium ion. The best detection limits (?log aequation/tex2gif-inf-1.gif=7.08–7.36) are obtained for electrode membranes containing 1,3‐bisbridged cofacial‐calix[6]crown‐4‐ethers( I‐III ), and the values are the lowest compared with those reported previously. The highest selectivity coefficients [ 3.74(Cs/K), 2.63(Cs/Rb)] are obtained for the membrane of 1,3‐bisbridged calix[6]crown‐4‐ether( II ), and these values are also the highest compared with previous reports for Cs⁺‐ISEs. The highest selectivity towards cesium ion is attributed to the geometrically cofacial positions of two crown‐ethers in calix[6]crowns in order to provide the complex of cesium ion and eight oxygens of cofacial crowns.     

Cover Picture: Construction of Crown Ether‐Stoppering [3]Rotaxanes Based on N‐Hetero Crown Ether Host (Chin. J. Chem. 7/2017)

The cover picture shows shows the construction of crown etherstoppering [3]rotaxanes based on N ‐hetero crown ether host. Usually, crown ethers play the role of host macrocycles to combine with the guest molecules in the construction of rotaxanes. Based on the fact that crown ethers have large dimension, two [3]rotaxanes containing four crown ether units were designed and synthesized, of which, two N ‐hetero crown ether components were employed as the macrocyclic hosts to assemble the mechanically interlocked framework by using a template‐directed clipping reaction while bis (metaphenylene‐26‐crown‐8) located on two sides of template diammonium acting as the stoppering groups of [3]rotaxanes. More details are discussed in the article by Yin et al. on page 1050–1056.

     

Synthesis and Optical Properties of 2,13‐Dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6

A new crown ether of 2,13‐dibenzothiazol‐2′‐yldibenzo[b,k]‐18‐crown‐6 was synthesized from 2,13‐diformyl‐ dibenzo[b,k]‐18‐crown‐6 with 2‐aminothiophenol. The binding behavior and the optical properties of the crown ether were examined through UV‐visible spectroscopy and fluorescence spectroscopy. When complexed with Na⁺, K⁺, Rb⁺ and Cs⁺ ions, it led to intramolecular charge transfer and caused the changes of the fluorescence spectra. The protonation of the crown ether was also studied.     

Supramolecular Fullerene Chemistry: A Comprehensive Study of Cyclophane‐Type Mono‐ and Bis‐Crown Ether Conjugates of C70

The covalently templated bis‐functionalization of C₇₀, employing bis‐malonate 5 tethered by an anti‐disubstituted dibenzo[18]crown‐6 (DB18C6) ether, proceeds with complete regiospecificity and provides two diastereoisomeric pairs of enantiomeric C₇₀ crown ether conjugates, (±)‐ 7a and (±)‐ 7b , featuring a five o'clock bis‐addition pattern that is disfavored in sequential transformations (Scheme 1). The identity of (±)‐ 7a was revealed by X‐ray crystal‐structure analysis (Fig. 6). With bis‐malonate 6 containing a syn‐disubstituted DB18C6 tether, the regioselectivity of the macrocylization via double Bingel cyclopropanation changed completely, affording two constitutionally isomeric C₇₀ crown ether conjugates in a ca. 1 : 1 ratio featuring the twelve ( 16 ) and two o'clock ((±)‐ 15 ) addition patterns, respectively (Scheme 3). The X‐ray crystal‐structure analysis of the twelve o'clock bis‐adduct 16 revealed that a H₂O molecule was included in the crown ether cavity (Figs. 7 and 8). Two sequential Bingel macrocyclizations, first with anti‐DB18C6‐tethered ( 5 ) and subsequently with syn‐DB18C6‐tethered ( 6 ) bis‐malonates, provided access to the first fullerene bis‐crown ether conjugates. The two diastereoisomeric pairs of enantiomers (±)‐ 28a and (±)‐ 28b were formed in high yield and with complete regioselectivity (Scheme 9). The cation‐binding properties of all C₇₀ crown‐ether conjugates were determined with the help of ion‐selective electrodes (ISEs). Mono‐crown ether conjugates form stable 1 : 1 complexes with alkali‐metal ions, whereas the tetrakis‐adducts of C₇₀, featuring two covalently attached crown ethers, form stable 1 : 1 and 1 : 2 host‐guest complexes (Table 2). Comparative studies showed that the conformation of the DB18C6 ionophore imposed by the macrocyclic bridging to the fullerene is not particularly favorable for strong association. Reference compound (±)‐ 22 (Scheme 4), in which the DB18C6 moiety is attached to the C₇₀ sphere by a single bridge only and, therefore, possesses higher conformational flexibility, binds K⁺ and Na⁺ ions better by factors of 2 and 20, respectively. Electrochemical studies demonstrate that cation complexation at the crown ether site causes significant anodic shifts of the first reduction potential of the appended fullerene (Table 3). In case of the C₇₀ mono‐crown ether conjugates featuring a five o'clock functionalization pattern, addition of 1 equiv. of KPF₆ caused an anodic shift of the first reduction wave in the cyclic voltammogram (CV) by 70 to 80 mV, which is the result of the electrostatic effect of the K⁺ ion bound closely to the fullerene core (Fig. 14). Addition of 2 equiv. of K⁺ ions to C₇₀ bis‐crown ether conjugates resulted in the observation of only one redox couple, whose potential is anodically shifted by 170 mV with respect to the corresponding wave in the absence of the salt (Fig. 16). The synthesis and characterization of novel tris‐ and tetrakis‐adducts of C₇₀ are reported (Schemes 5 and 6). Attempts to prepare even more highly functionalized derivatives resulted in the formation of novel pentakis‐ and hexakis‐adducts and a single heptakis‐adduct (Scheme 7), which were characterized by ¹H‐ and ¹³C‐NMR spectroscopy (Fig. 10), as well as matrix‐assisted laser‐desorption‐ionization mass spectrometry (MALDI‐TOF‐MS). Based on predictions from density‐functional‐theory (DFT) calculations (Figs. 12 and 13), structures are proposed for the tris‐, tetrakis‐, and pentakis‐adducts.     

Synthese,Charakterisierung und Kristallstrukturen der Pseudohalogen‐Kronenether‐Komplexe [K([18]krone‐6)(X)(OPPh3)] (X = N3–, OCN– und SCN–)

Preparation, Characterisation, and Crystal Structures of the Pseudohalogen Crown Ether Complexes [K([18]crown‐6)(X)(OPPh₃)] (X = N₃^–, OCN^– and SCN^–) The potassium crown ether complexes [K([18]Crown‐6)(X)(OPPh₃)] (with X = N₃^–, OCN^– and SCN^–) can be obtained by reaction of KX with 18‐crown‐6 (1, 4, 7, 10, 13, 16‐hexaoxacyclooctadecane and triphenylphosphane in THF exposed to UV light. All crown ether complexes were characterized by means of vibrational spectroscopy and X‐ray diffraction. They crystallize in the rhombic pointgroup R3m with three molecules in the unit cell: [K([18]crown‐6) (N₃)(OPPh₃)] ( 1 ): lattice constants at 293 K: a = b = 14.213(2) Å; c = 13.951(2) Å; R₁ = 0.0249. [K([18]crown‐6)(OCN)(OPPh₃)] ( 2 ): a = b = 14.239(2) Å; c = 13.8927(14) Å; R₁ = 0.0257. [K([18]crown‐6)(NCS)(OPPh₃)] ( 3 ): a = b = 14.339(2) Å; c = 14.266(2) Å; R₁ = 0.0264.     

Main‐Chain Linear Polyrotaxanes: Synthesis,Characterization, and Conformational Modulation

Two functional main‐chain linear polyrotaxanes, one a covalent polymeric chain that threads through many macrocycles ( P1 ) and the other a poly[n]rotaxane chain that is composed of many repeating rotaxane units ( P2 ), were synthesized by employing strong crown‐ether/ammonium‐based ( DB24C8 / DBA ) host–guest interactions and click chemistry. Energy transfer between the wheel and axle units in both polyrotaxanes was used to provide insight into the conformational information of their resulting polyrotaxanes. Steady‐state and time‐resolved spectroscopy were performed to understand the conformation differences between polymers P1 and P2 in solution. Additional investigations by using dynamic/static light scattering and atomic force microscopy illustrated that polymer P1 was unbending and had a rigid rod‐like structure, whilst polymer P2 was curved and flexible. This flexible topology facilitated the self‐assembly of polymer P2 into relatively large ball‐shaped particles. In addition, the energy transfer between the wheel and axle units was controlled by the addition of specific anions or base. The anion‐induced energy enhancement was attributed to a change in electrostatic interactions between the polymer chains. The base‐driven molecular shuttle broke the DB24C8 / DBA host–guest interactions. These results confirm that both intra‐ and intermolecular electrostatic interactions are crucial for modulating conformational topology, which determines the assembly of polyrotaxanes in solution.     

Enhancement of Host–Guest Interactions Using Rationally Designed Macrocyclic Boronic Esters with a Naphthalene Core

Efficient inclusion of electron‐deficient aromatic guest molecules in an organic solvent utilizing π‐stacking interactions was achieved by using two kinds of macrocyclic boronic esters, 1,4‐naph‐ [2+2] and 1,5‐naph‐ [2+2] , which were easily prepared by self‐assembly of 1,4‐naphthalenediboronic acid ( 3 ) or 1,5‐naphthalenediboronic acid ( 4 ) and racemic tetrol 1 with an indacene framework in a protic solvent. The X‐ray crystallographic analyses revealed that the tilt angles of the two naphthalene rings are different: that of 1,4‐naph‐ [2+2] is about 15° and that of 1,5‐naph‐ [2+2] is about 0°. Owing to the parallel alignment of two aromatic rings, 1,5‐naph ‐[2+2] has a much higher binding ability than 1,4‐naph‐ [2+2] . This knowledge could be useful for the design of the new host molecules in organic solvents.     

Neue Kronenether‐stabilisierte Oxoniumhalogenochalkogenate: [H3O(Dibromo‐benzo‐18‐Krone‐6)]2[Se3Br10] und [H5O2(Bis‐dibromo‐dibenzo‐24‐Krone‐8]2[Se3Br8]

Novel Oxonium Halogenochalcogenates Stabilized by Crown Ethers: [H₃O(Dibromo‐benzo‐18‐crown‐6)]₂[Se₃Br₁₀] and [H₅O₂(Bis‐dibromo‐dibenzo‐24‐crown‐8]₂[Se₃Br₈] Two novel complex oxonium bromoselenates(II,IV) and –(II) are reported containing [H₃O]⁺ and [H₅O₂]⁺ cations coordinated by crown ether ligands. [H₃O(dibromo‐benzo‐18‐crown‐6)]₂[Se₃Br₁₀] ( 1 ) and [H₅O₂(bis‐dibromo‐dibenzo‐24‐crown‐8]₂[Se₃Br₈] ( 2 ) were prepared as dark red crystals from dichloromethane or acetonitrile solutions of selenium tetrabromide, the corresponding unsubstituted crown ethers, and aqueous hydrogen bromide. The products were characterized by their crystal structures and by vibrational spectra. 1 is triclinic, space group (Nr. 2) with a = 8.609(2) Å, b = 13.391(3) Å, c = 13.928(3) Å, α = 64.60(2)°, β = 76.18(2)°, γ = 87.78(2)°, V = 1404.7(5) ų, Z = 1. 2 is also triclinic, space group with a = 10.499(2) Å, b = 13.033(3) Å, c = 14.756(3) Å, α = 113.77(3)°, β = 98.17(3)°, γ = 93.55(3)°. V = 1813.2(7) ų, Z = 1. In the reaction mixture complex redox reactions take place, resulting in (partial) reduction of selenium and bromination of the crown ether molecules. In 1 the centrosymmetric trinuclear [Se₃Br₁₀]^2? consists of a central Se^IVBr₆ octahedron sharing trans edges with two square planar Se^IIBr₄ groups. The novel [Se₃Br₈]^2? in 2 is composed of three planar trans‐edge sharing Se^IIBr₄ squares in a linear arrangement. The internal structure of the oxonium‐crown ether complexes is largely determined by the steric restrictions imposed by the aromatic rings in the crown ether molecules, as compared to complexes with more flexible unsubstituted crown ether ligands.     

Self‐Assembly of a [2]Pseudorotaxane by an Inchworm‐Motion Mechanism

The threading of biomolecules through pores or channels in membranes is important to validate the physiological activities of cells. To aid understanding of the controlling factors required for the translocation in space with confined size and distorted conformation, it is desirable to identify experimental systems with minimized complexity. We demonstrate the mechanism of a linear guest L1 threading into a tris(crown ether) host TC with a combinational distorted cavity to form a triply interlocked [2]pseudorotaxane 3in‐[ L1 ? TC ]. An inchworm‐motion mechanism is proposed for the process. For the forward‐threading steps that lead to the formation of higher‐order interlocked species, guest L1 must adopt a bent conformation to find the next crown ether cavity. Two simplified models are applied to investigate the self‐assembly dynamic of 3in‐[ L1 ? TC ]. Kinetic NMR spectroscopic and molecular dynamics (MD) studies show that formation of the singly penetrated species is fast, whereas formation of the doubly and triply threaded species is several orders of magnitude slower. During threading the freedom of both the guest L1 and host TC gradually decrease due to their interactions. This results in a significant entropy effect for the threading dynamic, which is also observed for the threading of a biomolecular chain through a channel.     

基于氢键诱导的预组织模板的单环、双环及三环动态共价键自组装

利用氢键驱动的“之”字型芳酰胺为“引导”组分,本文报道了三个单环、双环及三环分子的动态共价键自组装。单环分子是一个四氨基衍生物,从“U”-型二醛和卟啉二胺的2+2缩合后经NaBH3CN还原制备。而双环及三环分子以刚性的三氨及四氨寡聚体为模板,从两个六组分反应制备得到。     

Encapsulation of Pyrene‐Functionalized Poly(benzyl ether) Dendrons into a Water‐Soluble Organometallic Cage

Two generations of lipophilic pyrenyl functionalized poly(benzyl ether) dendrimers (P₁ and P₂) have been synthesized. The thermal properties of the two functionalized dendrimers have been investigated, and the pyrenyl group of the dendritic molecules encapsulated in the arene–ruthenium metalla‐cage, [Ru₆(p‐cymene)₆(tpt)₂(donq)₃]⁶⁺ ([ 1 ]⁶⁺) (tpt=2,4,6‐tri(pyridin‐4‐yl)‐1,3,5‐triazine; donq=5,8‐dioxydo‐1,4‐naphthoquinonato). The host–guest properties of [P₁⊂ 1 ]⁶⁺ and [P₂⊂ 1 ]⁶⁺ were studied in solution by NMR and UV/Vis spectroscopic methods, thus allowing the determination of the affinity constants. Moreover, the cytotoxicity of these water‐soluble host–guest systems was evaluated on human ovarian cancer cells.     

25,27‐(6‐Tosyl‐3,9‐dioxa‐6‐aza­un­decane‐1,11‐diyldioxy)‐26,28‐(3,6,9‐trioxaun­decane‐1,11‐diyldioxy)­calix­[4]­arene

A new calix­[4]‐­crowned aza­crown ether, C₅₁H₅₉NO₁₁S, consisting of four phenyl rings in a 1,3‐alternate conformation was synthesized from the reaction of 25,27‐bis(5‐chloro‐3‐oxa­pentyl­oxy)­calix­[4]­crown‐5 and p‐toluene­sulfon­amide in the presence of Cs₂CO₃. A crown‐5 loop was attached on the two facing lower rims of the calix­[4]­arene and the N‐tosyl aza­crown group was attached on the other set of lower rims of the calix­[4]­arene backbone. This mol­ecule seems to offer an inside cavity for the formation of a host–guest complex.