X-ray absorption fine structure study of amorphous metal oxide thin films prepared by photochemical metalorganic deposition

The oxidation state and local geometry of the metal centers in amorphous thin films of Fe₂O₃ (Fe³⁺ oxidation state), CoFe₂O₄ (Co²⁺/Fe³⁺ oxidation states), and Cr₂O₃ (Cr³⁺ oxidation state) are determined using K edge X-ray absorption near-edge structure (XANES) spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. The metal oxide thin films were prepared by the solid-state photochemical decomposition of the relevant metal 2-ethylhexanoates, spin cast as thin films. No peaks are observed in the X-ray diffraction patterns, indicating the metal oxides are X-ray amorphous. The oxidation state of the metals is determined from the edge position of the K absorption edges, and in the case of iron-containing samples, an analysis of the pre-edge peaks. In all cases, the EXAFS analysis indicates the first coordination shell consists of oxygen atoms in an octahedral geometry, with a second shell consisting of metals. No higher shells are observed beyond 3.5 Å for all samples, indicating the metal oxides are truly amorphous, consistent with X-ray diffraction results.     

Self‐Assembling Synthesis of Free‐standing Nanoporous Graphene–Transition‐Metal Oxide Flexible Electrodes for High‐Performance Lithium‐Ion Batteries and Supercapacitors

The synthesis of nanoporous graphene by a convenient carbon nanofiber assisted self‐assembly approach is reported. Porous structures with large pore volumes, high surface areas, and well‐controlled pore sizes were achieved by employing spherical silica as hard templates with different diameters. Through a general wet‐immersion method, transition‐metal oxide (Fe₃O₄, Co₃O₄, NiO) nanocrystals can be easily loaded into nanoporous graphene papers to form three‐dimensional flexible nanoarchitectures. When directly applied as electrodes in lithium‐ion batteries and supercapacitors, the materials exhibited superior electrochemical performances, including an ultra‐high specific capacity, an extended long cycle life, and a high rate capability. In particular, nanoporous Fe₃O₄–graphene composites can deliver a reversible specific capacity of 1427.5 mAh g^?1 at a high current density of 1000 mA g^?1 as anode materials in lithium‐ion batteries. Furthermore, nanoporous Co₃O₄–graphene composites achieved a high supercapacitance of 424.2 F g^?1. This work demonstrated that the as‐developed freestanding nanoporous graphene papers could have significant potential for energy storage and conversion applications.     

Characterization of thin metastable vanadium oxide films by Raman spectroscopy

Thin films are potentiodynamically generated on vanadium in Ba²⁺/acetate electrolyte systems at high voltages. The influence of the anodic potential up to 400 V on the composition and structure of the about 500 nm thin anodic conversion films are investigated. Raman spectroscopy indicates that different film types depend on the electrochemical process parameters. The relationship between the Raman laser excitation power and the amorphous or microcrystalline film structure is also discussed. Beside metastable disordered structures the films contain crystalline phases of V₂O₅, V₄O₉ and barium vanadate, respectively.     

Individual and Simultaneous Voltammetric Determination of Cd(II), Cu(II) and Pb(II) Applying Amino Functionalized Fe3O4@Carbon Microspheres Modified Electrode

Amino‐functionalized Fe₃O₄@carbon microspheres (NH₂?Fe₃O₄@C) were prepared and the electrochemical sensor was constructed using NH₂?Fe₃O₄@C modified glassy carbon electrodes (GCE) to determine toxic heavy metals in aqueous solution. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) were used to characterize the structure and phase of NH₂?Fe₃O₄@C. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) results indicate that NH₂?Fe₃O₄@C modified GCE possesses large active area and excellent electron transfer. Under optimized electrochemical condition, Cd(II), Pb(II) and Cu(II) were determined using NH₂?Fe₃O₄@C modified GCE. The electrode through amino functionalization exhibits higher sensitivity and lower detection limit toward Cd(II) and Cu(II) due to the acid‐base pairing interaction between the electron‐rich ?NH₂ ligand and the electron‐deficient heavy metal ions. Compared with other similar results reported in the literature, the NH₂?Fe₃O₄@C modified electrode exhibits wider linear response range while with comparable lower detection limit. It also exhibits excellent stability, reproducibility and anti‐interference ability.     

Electrochemical Properties and Sodium‐Storage Mechanism of Ag2Mo2O7 as the Anode Material for Sodium‐Ion Batteries

Silver molybdate, Ag₂Mo₂O₇, has been prepared by a conventional solid‐state reaction. Its electrochemical properties as an anode material for sodium‐ion batteries (SIBs) have been comprehensively examined by means of galvanostatic charge–discharge cycling, cyclic voltammetry, and rate performance measurements. At operating voltages between 3.0 and 0.01 V, the electrode delivered a reversible capacity of nearly 190 mA h g^?1 at a current density of 20 mA g^?1 after 70 cycles. Ag₂Mo₂O₇ also demonstrated a good rate capability and long‐term cycle stability, the capacity reaching almost 100 mA h g^?1 at a current density of 500 mA g^?1, with a capacity retention of 55 % over 1000 cycles. Moreover, the sodium storage process of Ag₂Mo₂O₇ has been investigated by means of ex situ XRD, Raman spectroscopy, and HRTEM. Interestingly, the anode decomposes into Ag metal and Na₂MoO₄ during the initial discharge process, and then Na⁺ ions are considered to be inserted into/extracted from the Na₂MoO₄ lattice in the subsequent cycles governed by an intercalation/deintercalation mechanism. Ex situ HRTEM images revealed that Ag metal not only remains unchanged during the sodiation/desodiation processes, but is well dispersed throughout the amorphous matrix, thereby greatly improving the electronic conductivity of the working electrode. The “in situ” decomposition behavior of Ag₂Mo₂O₇ is distinct from that of chemically synthesized, metal‐nanoparticle‐coated electrode materials, and provides strong supplementary insight into the mechanism of such new anode materials for SIBs and may set a precedent for the design of further materials.     

Effect of Power Density on the Electrochemical Properties of Undoped Amorphous Carbon (a‐C) Thin Films

Undoped a‐C thin films were deposited with varying power density from 10 to 25 W/cm² using unbalanced closed‐field magnetron sputtering (CFUBMS). The effect of power density on the physical and electrochemical properties was investigated by experimental characterization methods and atomistic simulations. XPS indicated that the films were composed mostly of sp²‐bonded carbon (55–58 at.%) with a small amount of oxygen (8–9 at.%) in the surface region. The films appeared completely amorphous in XRD. The I_D/I_G ratio obtained by Raman spectroscopy indicated an increase from 1.76 to 2.34 with power density. The experimental and simulated data suggested a possible ordering and/or clustering of the sp² phase with power density as the cause of the improved electrical properties of the a‐C films. The electrochemical properties of a‐C were between those of glassy carbon and tetrahedral amorphous carbon with potential windows ranging from 2.77 to 2.93 V and double‐layer capacitance values around 0.90 μF cm^?2. Electron transfer for Ru(NH₃)₆^3+/2+ and FcMeOH^+1/0 was reversible whereas that for IrCl₆^2?/3? was quasi‐reversible. Peak potential separation of dopamine and oxidation potential of ascorbic acid decreased with power density, correlating with the structural and electrical changes of the films. The a‐C thin films deposited by CFUBMS are inherently conductive and their physical properties can be adjusted by varying the deposition parameters to a wide range of electrochemical applications.     

Characterization of thin metastable vanadium oxide films by Raman spectroscopy

Thin films are potentiodynamically generated on vanadium in Ba²⁺/acetate electrolyte systems at high voltages. The influence of the anodic potential up to 400 V on the composition and structure of the about 500 nm thin anodic conversion films are investigated. Raman spectroscopy indicates that different film types depend on the electrochemical process parameters. The relationship between the Raman laser excitation power and the amorphous or microcrystalline film structure is also discussed. Beside metastable disordered structures the films contain crystalline phases of V₂O₅, V₄O₉ and barium vanadate, respectively. Received: 15 July 1997 / Revised: 16 February 1998 / Accepted: 21 February 1998     

General Approach to Single and Hybrid Metal Oxide Fiber Structures for High‐Performance Lithium‐Ion Batteries

Owing to the high specific capacity and energy density, metal oxides have become very promising electrodes for lithium‐ion batteries (LIBs). However, poor electrical conductivity accompanied with inferior cycling stability resulting from large volume changes are the main obstacles to achieve a high reversible capacity and stable cyclability. Herein, a facile and general approach to fabricate SnO₂, Fe₂O₃ and Fe₂O₃/SnO₂ fibers is proposed. The appealing structural features are favorable for offering a shortened lithium‐ion diffusion length, easy access for the electrolyte and reduced volume variation when used as anodes in LIBs. As a consequence, both single and hybrid oxides show satisfactory reversible capacities (1206 mAh g^?1 for Fe₂O₃ and 1481 mAh g^?1 for Fe₂O₃/SnO₂ after 200 cycles at 200 mA g^?1) and long lifespans.     

A Reliable Aerosol‐Spray‐Assisted Approach to Produce and Optimize Amorphous Metal Oxide Catalysts for Electrochemical Water Splitting

An aerosol‐spray‐assisted approach (ASAA) is proposed and confirmed as a precisely controllable and continuous method to fabricate amorphous mixed metal oxides for electrochemical water splitting. The proportion of metal elements can be accurately controlled to within (5±5) %. The products can be sustainably obtained, which is highly suitable for industrial applications. ASAA was used to show that Fe₆Ni₁₀O_x is the best catalyst among the investigated Fe‐Ni‐O_x series with an overpotential of as low as 0.286 V (10 mA cm^?2) and a Tafel slope of 48 mV/decade for the electrochemical oxygen evolution reaction. Therefore, this work contributes a versatile, continuous, and reliable way to produce and optimize amorphous metal oxide catalysts.     

Highly Porous NiCoSe4 Microspheres as High‐Performance Anode Materials for Sodium‐Ion Batteries

Binary transition metal selenides have been more promising than single transition metal selenides as anode materials for sodium‐ion batteries (SIBs). However, the controlled synthesis of transition metal selenides, especially those derived from metal‐organic‐frameworks with well‐controlled structure and morphology is still challenging. In this paper, highly porous NiCoSe₄@NC composite microspheres were synthesized by simultaneous carbonization and selenization of a Ni?Co‐based metal‐organic framework (NiCo‐MOF) and characterized by scanning electron microscopy, transition electron microscopy, X‐Ray diffraction, X‐Ray photoelectron spectroscopy and electrochemical techniques. The rationally engineered NiCoSe₄@NC composite exhibits a capacity of 325 mAh g^?1 at a current density of 1 A g^?1, and 277.8 mAh g^?1 at 10 A g^?1. Most importantly, the NiCoSe₄@NC retains a capacity of 293 mAh g^?1 at 1 A g^?1 after 1500 cycles, with a capacity decay rate of 0.025 % per cycle.     

Graphitized carbon and graphene modified Fe2O3/Li4Ti5O12 as anode material for lithium ion batteries

Graphitized carbon (GC) and graphene (GE) modified Fe₂O₃/Li₄Ti₅O₁₂ (LTO) composites have been synthesized via a solid‐state reaction, respectively. The structure, morphology and electrochemical performance of the materials have also been characterized with X‐ray diffraction (XRD), scanning electron microscope (SEM) with an energy dispersive spectroscopy (EDS) system, X‐ray photoelectron spectrometer (XPS), Fourier transform infrared spectroscopy (FTIR) and electrochemical measurements. The discharge capacities of Fe₂O₃/LTO, GC/Fe₂O₃/LTO and GE/Fe₂O₃/LTO are 100.2 mAh g^?1, 207.5 mAh g^?1 and 238.9 mAh g^?1 after 100 cycles at the current density of 176 mA g^?1. The cyclic stability and rate capability are in the order of GE/Fe₂O₃/LTO > GC/Fe₂O₃/LTO > Fe₂O₃/LTO because of the synergistic effect between GC (GE) and Fe₂O₃/LTO. Copyright © 2016 John Wiley & Sons, Ltd.     

Nanosized Fe3O4-modified activated carbon for supercapacitor electrodes

Nanosized Fe₃O₄-modified activated carbon composites for supercapacitor electrodes have been investigated. Structural and morphological characterizations of activated materials are carried out using X-ray diffraction and scanning electron microscopy, respectively. The electrochemical performances of the composite electrodes are evaluated by cyclic voltammetry, chronopotentiometry and electrochemical impedance spectroscopy. The experimental results show that the specific capacitances of the 10 wt % Fe₃O₄-modified activated carbon composite electrode (154.3 F g^?1) is highly improved compared with that of Fe₃O₄ (78.5 F g^?1) and AC (79.2 F g^?1) at the current density of 5 mA cm^?2, respectively. The charge/discharge tests show that it could retain 79.6% of its initial capacitance over 1000 cycles, suggesting its potential application for the fabrication of high-quality supercapacitors.     

Solvent‐Mediated Control of the Electrochemical Discharge Products of Non‐Aqueous Sodium–Oxygen Electrochemistry

The reduction of dioxygen in the presence of sodium cations can be tuned to give either sodium superoxide or sodium peroxide discharge products at the electrode surface. Control of the mechanistic direction of these processes may enhance the ability to tailor the energy density of sodium–oxygen batteries (NaO₂: 1071 Wh kg^?1 and Na₂O₂: 1505 Wh kg^?1). Through spectroelectrochemical analysis of a range of non‐aqueous solvents, we describe the dependence of these processes on the electrolyte solvent and subsequent interactions formed between Na⁺ and O₂^?. The solvents ability to form and remove [Na⁺‐O₂^?]_ads based on Gutmann donor number influences the final discharge product and mechanism of the cell. Utilizing surface‐enhanced Raman spectroscopy and electrochemical techniques, we demonstrate an analysis of the response of Na‐O₂ cell chemistry with sulfoxide, amide, ether, and nitrile electrolyte solvents.     

Magnetite Nanorods Stabilized by Polyaniline/Reduced Graphene Oxide as a Sensing Platform for Selective and Sensitive Non‐enzymatic Hydrogen Peroxide Detection

In this study, magnetite nanorods stabilized on polyaniline/reduced graphene oxide (Fe₃O₄@PANI/rGO) was synthesized via a wet‐reflux strategy. The possible formation of Fe₃O₄@PANI/rGO was morphologically and structurally verified by field emission scanning electron microscopy (FE‐SEM), Fourier transform infrared (FT‐IR) spectroscopy, Raman spectroscopy, X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). Furthermore, the thermal stability of Fe₃O₄@PANI/rGO was measured by a thermogravimetric analyzer (TGA); the composite had good thermal stability owing to the ceramic nature of Fe₃O₄. The Fe₃O₄@PANI/rGO has been applied as a potential sensing platform for electrochemical detection of hydrogen peroxide (H₂O₂). By the combined efforts of extended active surface area, active carbon support, more catalytic active sites and high electrical conductivity, the Fe₃O₄@PANI/rGO exhibited an improved performance toward the non‐enzymatic detection of H₂O₂ in 0.5 M KOH with a fast response time (5 s), high sensitivity (223.7 μA mM^?1 cm^?2), low limit of detection (4.45 μM) and wide linear range (100 μM–1.5 mM). Furthermore, the fabricated sensor exhibited excellent recovery rates (94.2–104.0 %) during real sample analysis.     

Preparation of grain size controlled boron-doped diamond thin films and their applications in selective detection of glucose in basic solutions

Boron-doped diamond (BDD) thin films with different crystal grain sizes were prepared by controlling the reacting gas pressure using hot filament chemical vapor deposition (HFCVD). The morphologies and structures of the prepared diamond thin films were characterized by scanning electron microscopy (SEM) and Raman spectroscopy. The electrochemical responses of K₄Fe(CN)₆ on different BDD electrodes were investigated. The results suggested that electron transfer was faster at the boron-doped nanocrystalline diamond (BDND) thin film electrodes in comparison with that at other BDD thin film electrodes. The prepared BDD thin film electrodes without any modification were used to directly detect glucose in the basic solution. The results showed that the as-prepared BDD thin film electrodes exhibited good selectivity for detecting glucose in the presence of ascorbic acid (AA) and uric acid (UA). The higher sensitivity was observed on the BDND thin film grown on the boron-doped microcrystalline diamond (BDMD) thin film surface, and the linear response range, sensitivity and the low detection limit were 0.25–10 mM, 189.1 μA mmo^?1 cm^?2 and 25 μM (S/N=3) for glucose in the presence of AA and UA, respectively.     

Nanostructured ferrite/graphene/polyaniline using for supercapacitor to enhance the capacitive behavior

Graphene nanosheets, polyaniline (PANI), and nanocrystallites of transition metal ferrite {Fe₃O₄ (Mag), NiFe₂O₄ (NiF), and CoFe₂O₄ (CoF)} have been prepared and characterized via XRD, FTIR, SEM, TEM, UV–vis spectroscopy, cyclic voltammetry, galvanostatic charge discharges, and impedance spectroscopy. Electrochemical measurements showed that supercapacitances of hybrid electrodes made of the ternary materials are higher than that of hybrid electrode made of binary or single material. The ternary hybrid CoF/graphene (G)/PANI electrode exhibits a highest specific capacitance reaching 1123 Fg^?1, an energy density of 240 Wh kg^?1 at 1 A g^?1, and a power density of 2680 Wkg^?1 at 1 A g^?1 and outstanding cycling performance, with 98.2% capacitance retained over 2000 cycles. The extraordinary electrochemical performance of the ternary CoF/G/PANI hybrid can be attributed to the synergistic effects of the individual components. The PANI conducting polymer enhances an electron transport. The Ferrite nanoparticles prevent the restocking of the carbon sheets and provide Faradaic processes to increase the total capacitance.     

Sodium‐Ion Storage Properties of FeS–Reduced Graphene Oxide Composite Powder with a Crumpled Structure

The sodium‐ion storage properties of FeS–reduced graphene oxide (rGO) and Fe₃O₄‐rGO composite powders with crumpled structures have been studied. The Fe₃O₄‐rGO composite powder, prepared by one‐pot spray pyrolysis, could be transformed to an FeS‐rGO composite powder through a simple sulfidation treatment. The mean size of the Fe₃O₄ nanocrystals in the Fe₃O₄‐rGO composite powder was 4.4 nm. After sulfidation, FeS nanocrystals of size several hundred nanometers were confined within the crumpled structure of the rGO matrix. The initial discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders were 740 and 442 mA h g^?1, and their initial charge capacities were 530 and 165 mA h g^?1, respectively. The discharge capacities of the FeS‐rGO and Fe₃O₄‐rGO composite powders at the 50th cycle were 547 and 150 mA h g^?1, respectively. The FeS‐rGO composite powder showed superior sodium‐ion storage performance compared to the Fe₃O₄‐rGO composite powder.     

Supercritical Carbon Dioxide Assisted Deposition of Fe3O4 Nanoparticles on Hierarchical Porous Carbon and Their Lithium‐Storage Performance

A composite of highly dispersed Fe₃O₄ nanoparticles (NPs) anchored in three‐dimensional hierarchical porous carbon networks (Fe₃O₄/3DHPC) as an anode material for lithium‐ion batteries (LIBs) was prepared by means of a deposition technique assisted by a supercritical carbon dioxide (scCO₂)‐expanded ethanol solution. The as‐synthesized Fe₃O₄/3DHPC composite exhibits a bimodal porous 3D architecture with mutually connected 3.7 nm mesopores defined in the macroporous wall on which a layer of small and uniform Fe₃O₄ NPs was closely coated. As an anode material for LIBs, the Fe₃O₄/3DHPC composite with 79 wt % Fe₃O₄ (Fe₃O₄/3DHPC‐79) delivered a high reversible capacity of 1462 mA h g^?1 after 100 cycles at a current density of 100 mA g^?1, and maintained good high‐rate performance (728, 507, and 239 mA h g^?1 at 1, 2, and 5 C, respectively). Moreover, it showed excellent long‐term cycling performance at high current densities, 1 and 2 A g^?1. The enhanced lithium‐storage behavior can be attributed to the synergistic effect of the porous support and the homogeneous Fe₃O₄ NPs. More importantly, this straightforward, highly efficient, and green synthetic route will definitely enrich the methodologies for the fabrication of carbon‐based transition‐metal oxide composites, and provide great potential materials for additional applications in supercapacitors, sensors, and catalyses.     

A Microwave Synthesis of Mesoporous NiCo2O4 Nanosheets as Electrode Materials for Lithium‐Ion Batteries and Supercapacitors

A facile microwave method was employed to synthesize NiCo₂O₄ nanosheets as electrode materials for lithium‐ion batteries and supercapacitors. The structure and morphology of the materials were characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy and Brunauer–Emmett–Teller methods. Owing to the porous nanosheet structure, the NiCo₂O₄ electrodes exhibited a high reversible capacity of 891 mA h g^?1 at a current density of 100 mA g^?1, good rate capability and stable cycling performance. When used as electrode materials for supercapacitors, NiCo₂O₄ nanosheets demonstrated a specific capacitance of 400 F g^?1 at a current density of 20 A g^?1 and superior cycling stability over 5000 cycles. The excellent electrochemical performance could be ascribed to the thin porous structure of the nanosheets, which provides a high specific surface area to increase the electrode–electrolyte contact area and facilitate rapid ion transport.     

Fluorine‐Doped Fe2O3 as High Energy Density Electroactive Material for Hybrid Supercapacitor Applications

Nanostructured α‐Fe₂O₃ with and without fluorine substitution were successfully obtained by a green route, that is, microwave irradiation. The hematite phase materials were evaluated as a high‐performance electrode material in a hybrid supercapacitor configuration along with activated carbon (AC). The presence of fluorine was confirmed through X‐ray photoelectron spectroscopy and transmission electron microscopy. Fluorine‐doped Fe₂O₃ (F‐Fe₂O₃) exhibits an enhanced pseudocapacitive performance compared to that of the bare hematite phase. The F‐Fe₂O₃/AC cell delivered a specific capacitance of 71 F g^?1 at a current density of 2.25 A g^?1 and retained approximately 90 % of its initial capacitance after 15 000 cycles. Furthermore, the F‐Fe₂O₃/AC cell showed a very high energy density of about 28 W h kg^?1 compared to bare hematite phase (～9 W h kg^?1). These data clearly reveal that the electrochemical performance of Fe₂O₃ can be improved by fluorine doping, thereby dramatically improving the energy density of the system.