Electrochemiluminescence of CdSe Quantum Dots Composited with Nitrogen‐Doped Carbon Nanotubes

A nanocomposite of CdSe quantum dots with nitrogen‐doped carbon nanotubes was prepared for enhancing the electrochemiluminescent (ECL) emission of quantum dots. With hydrogen peroxide as co‐reactant, the nanocomposite modified electrode showed a cathodic ECL emission with a starting potential of ?0.97 V (vs. Ag/AgCl) in phosphate buffer solution, which was five‐times stronger than that from pure CdSe quantum dots and three‐times stronger than that from CdSe quantum dots composited with carbon nanotubes. The latter showed a starting potential of ?1.19 V. This result led to a sensitive ECL sensing of hydrogen peroxide with good stability, acceptable reproducibility and a detection limit down to 2.1×10^?7 mol L^?1. Nitrogen‐doped carbon nanotubes could be used as a good material for the construction of sensitive ECL biosensors for chemical and biochemical analysis.     

Amine‐Rich Nitrogen‐Doped Carbon Nanodots as a Platform for Self‐Enhancing Electrochemiluminescence

Amine‐rich nitrogen‐doped carbon nanodots (NCNDs) have been successfully used as co‐reactant in electrochemiluminescence (ECL) processes. Primary or tertiary amino groups on NCNDs have been studied as co‐reactant sites for Ru(bpy)₃²⁺ ECL, showing their eligibility as powerful alternatives to tripropylamine (TPrA). We also report the synthesis and ECL behavior of a new covalently linked hybrid of NCNDs and Ru(bpy)₃²⁺. Notably, the NCNDs in the hybrid act both as carrier for ECL labels and as co‐reactant for ECL generation. As a result, the hybrid shows a higher ECL emission as compared to the combination of the individual components, suggesting the self‐enhancing ECL of the ruthenium complex due to an intramolecular electron transfer process.     

Electrochemiluminescence Based on Solid State Tri(4,7‐diphenyl‐1,10‐phenanthroline) Ruthenium(II) Ditetrakis(4‐chlorophenyl) Borate Immobilized on Carbon Fibers

A simple method for immobilization of tri(4,7‐diphenyl‐1,10‐phenanthroline) ruthenium(II) ditetrakis(4‐chlorophenyl) borate ([Ru(dpp)₃][(4‐Clph)₄B]₂) on carbon fiber electrodes was developed. Excellent electrochemical activity and electrochemiluminescence (ECL) signal of the coated carbon fiber electrodes were observed using oxalate as the co‐reactant. In addition, the effects of pH, scan rate, nitrogen and oxygen on ECL intensity were also studied. To demonstrate the reliability, the coated carbon fiber electrodes were used as ECL detectors and very low concentration of phenol was detectable (5.0×10^?8 M).     

Dual Enhancement of Gold Nanocluster Electrochemiluminescence: Electrocatalytic Excitation and Aggregation‐Induced Emission

Ligand‐protected gold nanoclusters (AuNCs) have emerged as a new class of electrochemiluminescence (ECL) luminophores for their interesting catalytic and emission properties, although their quantum yield (Φ_ECL) in aqueous medium is low with a poor mechanistic understanding of the ECL process. Now it is shown that drying AuNCs on electrodes enabled both enhanced electrochemical excitation by an electrocatalytic effect, and enhanced emission by aggregation‐induced ECL (AIECL) for 6‐aza‐2‐thiothymine (ATT) protected AuNCs with triethylamine (TEA) as a coreactant. The dried ATT‐AuNCs/TEA system resulted in highly stable visual ECL with a Φ_ECL of 78 %, and a similar enhancement was also achieved with methionine‐capped AuNCs. The drying enabled dual‐enhancement mechanism has solved a challenging mechanistic problem for AuNC ECL probes, and can guide further rational design of ECL emitters.     

A Simple,Cost‐effective,and Environmentally Friendly Method for Determination of Ciprofloxacin in Drugs and Urine Samples Based on Electrogenerated Chemiluminescence

Ciprofloxacin is an antibiotic that belongs to the class of drugs known as quinolones and it is frequently used to treat a variety of bacterial infections. The present work aims the development of a simple, cost‐effective, and environmentally friendly method for the determination of ciprofloxacin in drugs and artificial urine samples due to the high importance of this antibiotic for the human health. The proposed method is based on the electrogenerated chemiluminescence (ECL) resulting from the reaction between the ciprofloxacin and the tris(2,2′‐bipyridyl)ruthenium(II) complex. This method exploits a screen‐printed carbon electrode positioned in an ECL cell with capacity to 50 μL of electrolytic solution. The ECL intensity was monitored with the aid of a photodiode. The ECL signal was simultaneously registered to the voltammetric measurements. Under optimized experimental conditions, the ECL method presented a linear response range for ciprofloxacin between 0.5 and 500 μmol L^?1 (or 0.0005 and 0.5 mmol L^?1). The proposed method presented a detection limit of 0.5 μmol L^?1 and it was successfully applied for the ciprofloxacin determination in drugs and artificial urine samples, with good accuracy and precision.     

Tris(2,2′‐bipyridyl)ruthenium(II) Electrogenerated Chemiluminescence Sensor Based on Platinized Carbon Nanotube–Zirconia–Nafion Composite Films

Mesoporous films of platinized carbon nanotube–zirconia–Nafion composite have been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium (II) (Ru(bpy)₃²⁺) on an electrode surface to yield a solid‐state electrogenerated chemiluminescence (ECL) sensor. The composite films of Pt–CNT–zirconia–Nafion exhibit much larger pore diameter (3.55 nm) than that of Nafion (2.82 nm) and thus leading to much larger ECL response for tripropylamine (TPA) because of the fast diffusion of the analyte within the films. Due to the conducting and electrocatalytic features of CNTs and Pt nanoparticles, their incorporation into the zirconia–Nafion composite films resulted in the decreased electron transfer resistance within the films. The present ECL sensor based on the Pt–CNT–zirconia–Nafion gave a linear response (R²=0.999) for TPA concentration from 3.0 nM to 1.0 mM with a remarkable detection limit (S/N=3) of 1.0 nM, which is much lower compared to those obtained with the ECL sensors based on other types of sol‐gel ceramic–Nafion composite films such as silica–Nafion and titania–Nafion.     

Reduced Carbon Dots versus Oxidized Carbon Dots: Photo‐ and Electrochemiluminescence Investigations for Selected Applications

The study of the composition, morphology, and surface structure of carbon dots (Cdots) is critical to understanding their effect on the photo‐ and electrochemiluminescence (PL and ECL) of Cdots in selected applications. Herein, two kinds of Cdots were prepared with 3‐(3,4‐dihydroxyphenyl)‐L ‐alanine (L ‐DOPA) as precursor. The Cdots prepared by using a carbonization‐extraction strategy have a low oxidation level and are denoted as reduced Cdots (r‐Cdots). The Cdots obtained with a carbonization‐oxidation process are highly oxidized and are denoted as oxidized Cdots (o‐Cdots). The o‐Cdots have a carbon core and oxygen‐containing loose shell, but the r‐Cdots consist mainly of the carbon core. Whereas r‐Cdots have a strong blue PL but no apparent ECL response, o‐Cdots exhibit a relatively weak PL and strong ECL emission. These properties allow for selected applications of the Cdots. The r‐Cdots were used in cell imaging with their high PL emission. The o‐Cdots, with their high ECL efficiencies, were selected to sense Cu²⁺ with Cu²⁺‐inducing ECL quenching in the o‐Cdots/K₂S₂O₈ system. This work provides the possibility to control the composition of Cdots for selected applications and shows a good way to characterize surface traps of Cdots because ECL is characterized by the surface‐state and PL is mainly related to the core‐state in Cdots.     

Pre‐oxidation of Gold Nanoclusters Results in a 66 % Anodic Electrochemiluminescence Yield and Drives Mechanistic Insights

Gold nanoclusters (AuNCs) are attractive electrochemiluminescence (ECL) emitters because of their excellent stability, near IR emission, and biocompatibility. However, their ECL quantum yield is relatively low, and our limited fundamental understanding has hindered rational improvement of this parameter. Herein, we report drastic enhancement of the ECL of ligand‐stabilized AuNCs by on‐electrode pre‐oxidation with triethylamine (TEA) as a co‐reactant. The l ‐methionine‐stabilized AuNCs resulted in a record high ECL yield of 66 %. This strategy was successfully extended to other AuNCs, and it is more effective for ligand shells that allow more effective electron transfer. In addition, excitation of the pre‐oxidized ECL required a lower potential than conventional methods, and no additional instrument was required. This work opens avenues for solving a challenging problem of AuNC‐based ECL probes and enriches fundamental understanding, greatly broadening their potential applications.     

A Novel Electrogenerated Chemiluminescence (ECL) Sensor Based on Ru(bpy)32+‐Doped Titania Nanoparticles Dispersed in Nafion on Glassy Carbon Electrode

A novel electrogenerated chemiluminescence (ECL) sensor based on Ru(bpy)₃²⁺‐doped titania (RuDT) nanoparticles dispersed in a perfluorosulfonated ionomer (Nafion) on a glassy carbon electrode (GCE) was developed in this paper. The electroactive component‐Ru(bpy)₃²⁺ was entrapped within the titania nanoparticles by the inverse microemulsion polymerization process that produced spherical sensors in the size region of 38±3 nm. The RuDT nanoparticles were characterized by electrochemical, transmission electron and scanning microscopy technology. The Ru(bpy)₃²⁺ encapsulation interior of the titania nanoparticles maintains its ECL efficiency and also reduces Ru(bpy)₃²⁺ leaching from the titania matrix when immersed in water due to the electrostatic interaction. This is the first attempt to prepare the RuDT nanoparticles and extend the application of electroactive component‐doped nanoparticles into the field of ECL. Since a large amount of Ru(bpy)₃²⁺ was immobilized three‐dimensionally on the electrode, the Ru(bpy)₃²⁺ ECL signal could be enhanced greatly, which finally resulted in the increased sensitivity. The ECL analytical performance of this ECL sensor for tripropylamine (TPA) was investigated in detail. This sensor shows a detection limit of 1 nmol/L for TPA. Furthermore, the present ECL sensor displays outstanding long‐term stability.     

Electrogenerated Chemiluminescence Ethanol Biosensor Based on Carbon Nanotube‐Titania‐Nafion Composite Film

Mesoporous titania‐Nafion composite doped with carbon nanotube (CNT) has been used for the immobilization of tris(2,2′‐bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) and alcohol dehydrogenase on an electrode surface to yield a highly sensitive and stable electrogenerated chemiluminescence (ECL) ethanol biosensor. The presence of CNT in the composite film increases not only the sensitivity of the ECL biosensor but also the long‐term stability of the biosensor. The present biosensor responds linearly to ethanol in the wide concentration ranges from 1.0×10^?5 M to 1.0×10^?1 M with a detection limit of 5.0×10^?6 M (S/N=3). The present ECL ethanol biosensor exhibited higher ECL response compared to that obtained with the ECL biosensor based on the corresponding composite without CNT. The present CNT‐based ECL biosensor showed good long‐term stability with 75% of its initial activity retained after 2 weeks of storage in 50 mM phosphate buffer at pH 7.0.     

Electochemiluminescence of CdTe/CdS Quantum Dots with Triproprylamine as Coreactant in Aqueous Solution at a Lower Potential and Its Application for Highly Sensitive and Selective Detection of Cu2+

Anodic electrochemiluminescence (ECL) of 3‐mercaptopropionic acid (MPA)‐ capped CdTe/CdS core‐shell quantum dots (QDs) with tripropylamine (TPrA) as the co‐reactant were studied in aqueous (Tris buffer) solution for the first time. The results suggest that the oxidation of TPrA at a glassy carbon electrode (GCE) surface participated in the ECL of QDs, and the onset potential and the intensity of ECL of CdTe/CdS QDs were affected seriously by TPrA, as the co‐reactant, in Tris buffer solution. The onset potential of ECL in this new system was about +0.5 V (vs. Ag/AgCl) and the ECL intensity greatly enhanced when TPrA was present. Various influencing factors, such as the electrolyte, pH, QDs concentration, potential range and scan rates on the ECL were studied. Based on the selective quenching by Cu²⁺ to the light emission from CdTe/CdS QDs/TPrA system, a highly sensitive and selective method for the determination of Cu²⁺ was developed. At the optimal conditions, the relative ECL intensity, I₀/I, was proportional to the concentration of Cu²⁺ from 14 nM to 0.21 μM with the detection limit of 6.1 nM based on the signal‐to‐noise ratio of 3. The possible ECL mechanism of QDs and the quenching mechanism of ECL were proposed.     

A Novel Solid‐state Electrochemiluminescent Enantioselective Sensor for Ascorbic Acid and Isoascorbic Acid

A novel, stable, solid‐state and stereoselective electrochemiluminescence (ECL) sensor has been designed to enantioselectively discriminate ascorbic acid (AA) and isoascorbic acid (IAA) by immobilizing Ru(bpy)₃²⁺ (Ru), thiolated β‐cyclodextrin (β‐CD‐SH) and gold/platinum hybrid nanoparticles supported on multiwalled carbon nanotube/silica coaxial nanocables (GP‐CSCN) on glassy carbon electrode. All chemical compounds could be immobilized on the surface of electrode stably through nafion film, and high stereoselectivity could be introduced to the sensor via the synergistic effects of the β‐CD‐SH and GP‐CSCN nanomaterials. When the developed sensor interacted with AA and IAA, obvious difference of ECL intensities was observed, and a larger intensity was obtained from AA, which indicated that this strategy could be employed to enantioselectively recognize AA and IAA. As a result, ECL technique might act as a promising method for recognition of chiral compounds.     

Rice Husk‐derived Hierarchical Micro/Mesoporous Carbon–Silica Nanocomposite as Superior Filler for Green Electronic Packaging Material

In this study, a carbon‐controllable hierarchical micro/mesoporous carbon–silica material derived from agricultural waste rice husk was easily synthesized and utilized as filler in an epoxy matrix for electronic packaging applications. Scanning electron microscopy, thermogravimetric analysis, and N₂ adsorption/desorption isotherms were used to characterize the morphology, thermal stability, carbon content, and porous structural properties, respectively, of the as‐obtained carbon–silica material, namely rice husk char (RHC ). As a filler material, the uniformly dispersed RHC filler in the epoxy/RHC composite was easily prepared through hydrogen bonding of the silanol group of silica with the epoxy matrix. For electronic packaging applications, the thermal conductivity and thermomechanical properties (storage modulus and coefficient of thermal expansion) of the epoxy/RHC composites improved with increasing carbon content. Moreover, loading of the 40% RHC filler substantially enhanced the storage modulus of the epoxy/RHC composite (5735 MPa ) compared to the epoxy with 40% commercial silica filler (3681 MPa ). Considerable commercial potential is expected for the carbon–silica composite because of the simple synthesis process and outstanding performance of the prepared packaging material.     

An Electrochemiluminesence Chiral Sensor for Propranolol Enantiomers Based on Functionalized Graphite‐like Carbon Nitride Nanosheets

Graphite‐like carbon nitride nanosheets (g‐C₃N₄) have been attracted considerable attention for their applications in catalysis and electrochemiluminesence (ECL) sensor. In this paper, a facile solvothermal method was employed to prepare the functionalized nanocomposites with metal salts cadmium carbonate (CdCO₃) and g‐C₃N₄ hybrids (g‐C₃N₄‐CdCO₃). The prepared materials were characterized by scanning electron microscope (SEM), X‐ray energy dispersive spectroscopy (EDX) and Fourier transform infrared spectra (FTIR). The nanocomposites was used not only as a new type luminophore but also as a chiral selector in this simple and sensitive ECL chiral sensor system for the recognition and detection of propranolol (Pro) enantiomers via quenching effect. The obvious difference of ECL signal of S‐Pro and R‐Pro was obtained. Thus, the sensor had the ability to distinguish Pro enantiomers. The mechanism of recognition was discussed by the theoretical calculation of binding constant and the water contact angle experiments. The sensor for Pro enantiomers was developed at wide concentration range from 0.001 to 1 mmol?L^?1. The sensor with excellent sensitivity, stability and reproducibility provide a new strategy based on ECL for chiral recognition and the ECL chiral sensor.     

Development and application of an electrochemiluminescent flow-injection cell based on CdTe quantum dots modified electrode for high sensitive determination of dopamine

A nano-liter sized flow-cell is developed for constructing a flow injection analysis (FIA) system with electrochemiluminescent (ECL) detection. A sensitive ECL electrode is applied as the working electrode in this flow-cell. It is obtained by immobilizing the composite of CdTe quantum dots (QDs), carbon nanotubes (CNTs) and chitosan (Chit) on indium tin oxide (ITO) glass. The CdTe QDs were synthesized in our lab and possessed a high quantum yield. It has been demonstrated as an efficient anodic ECL material with the triethylamine (TEA) as the co-reactant. The flow-cell gives the stable ECL background under optimized conditions for parameters such as electrolytic pulse, concentration of TEA and flow rate, etc. The sensitive ECL quenching response of dopamine (DA) is realized on this FIA system within the linear range from 10 pM to 4 nM and a detection limit as low as 3.6 pM. It is practically used to determine the neurotransmitters in cerebro-spinal fluid (CSF) with DA as the index and with an average recovery of 94%.     

Synthesis of PtNPs/AQ/Ru(bpy)3(2+) colloid and its application as a sensitive solid-state electrochemiluminescence sensor material

The facile synthesis of the novel platinum nanoparticles/Eastman AQ55D/ruthenium(II) tris(bipyridine) (PtNPs/AQ/Ru(bpy)3(2+)) colloidal material for ultrasensitive ECL solid-state sensors was reported for the first time. The cation ion-exchanger AQ was used not only to immobilize ECL active species Ru(bpy)3(2+) but also as the dispersant of PtNPs. Colloidal characterization was accomplished by transmission electron microscopy (TEM), X-ray photoelectron spectrum (XPS), and UV-vis spectroscopy. Directly coating the as-prepared colloid on the surface of a glassy carbon electrode produces an electrochemiluminescence (ECL) sensor. The electronic conductivity and electroactivity of PtNPs in composite film made the sensor exhibit faster electron transfer, higher ECL intensity of Ru(bpy)3(2+), and a shorter equilibration time than Ru(bpy)3(2+) immobilized in pure AQ film. Furthermore, it was demonstrated that the combination of PtNPs and permselective cation exchanger made the sensor exhibite excellent ECL behavior and stability and a very low limit of detection (1 x 10(-15) M) of tripropylamine with application prospects in bioanalysis. This method was very simple, effective, and low cost.     

A Sandwich‐type Electrochemiluminescence Aptasensor for Thrombin Based on Functional Co‐polymer Electrode Using Ru(bpy)32+ Doped Nanocomposites as Signal‐amplifying Tags

Herein, a signal‐on sandwich‐type electrochemiluminescence (ECL) aptasensor for the detection of thrombin (TB) was proposed. The graphene (GR) doped thionine (TH) was electropolymerized synchronously on the bare glassy carbon electrode (GCE) to form co‐polymer (PTG) electrode. The gold nanoparticles (AuNPs) were decorated on the surface of the PTG by in‐situ electrodeposition, and the functional co‐polymer (PTG‐AuNPs) electrode was utilized as sensing interface. Then, TB binding aptamer I (TBA I) as capture probes were modified on the PTG‐AuNPs electrode to capture TB, and Ru(bpy)₃²⁺/silver nanoparticles doped silica core‐shell nanocomposites‐labeled TB binding aptamer II (RuAg/SiO₂NPs@TBA II) were used as signal probes to further bind TB, resulting in a sandwich structure. With the assistant of silica shell and AgNPs, the enrichment and luminous efficiency of Ru(bpy)₃²⁺ were significantly improved. Under the synergy of PTG‐AuNPs and RuAg/SiO₂NPs, the ECL signal was dramatically increased. The proposed ECL aptasensor displayed a wide linear range from 2 fM to 2 pM with the detection limit of 1 fM, which is comparable or better than that in reported ECL aptasensors for TB using Ru(bpy)₃²⁺ and its derivatives as the luminescent substance. The excellent sensitivity makes the proposed aptasensor a promising potential in pharmaceutical and clinical analysis.     

Dual Intramolecular Electron Transfer for In Situ Coreactant‐Embedded Electrochemiluminescence Microimaging of Membrane Protein

The demand for transporting coreactant to emitter and short lifetime of the radicals in electrochemiluminescence (ECL) emission inhibit greatly its application in cytosensing and microscopic imaging. Herein we designed a dual intramolecular electron transfer strategy and tertiary amine conjugated polymer dots (TEA‐Pdots) to develop a coreactant‐embedded ECL mechanism and microimaging system. The TEA‐Pdots could produce ECL emission at +1.2 V without need of coreactant in test solution. The superstructure and intramolecular electron transfer led to unprecedented ECL strength, which was 132 and 45 times stronger than those from the mixture of Pdots with TEA at equivalent and 62.5 times higher amounts, respectively. The ECL efficiency was even higher than that of typical [Ru(bpy)₃]²⁺ system. Therefore, this strategy and coreactant‐embedded ECL system could be used for in situ ECL microimaging of membrane protein on single living cells without additional permeable treatment for transporting coreactant. The feasibility and validity were demonstrated by evaluating the specific protein expression on cell surface. This work opens new avenues for ECL applications in single cell analysis and dynamic study of biological events.     

Determination of Reduced Nicotinamide Adenine Dinucleotide Based on Immobilization of Tris(2,2′‐bipyridyl) Ruthenium(II) in Multiwall Carbon Nanotubes/Nafion Composite Membrane

Abstract

An electrochemiluminescence (ECL) method for reduced nicotinamide adenine dinucleotide (NADH) was proposed by immobilizing tris(2,2′‐bipyridyl) ruthenium(II) (Ru(bpy)₃ ²⁺) in multiwall carbon nanotubes (MWCNTs)/Nafion composite membrane that was formed on glassy carbon electrode surface. The electrochemical and ECL behaviors of the immobilized Ru(bpy)₃ ²⁺ were investigated. The cyclic votammogram of the modified electrode in pH 7.0 phosphate buffer solution showed a couple of redox peaks at +1190 and +1060 mV at 100 mV/s. The composite film had a more open structure and a large surface area allowing faster diffusion of Ru(bpy)₃ ²⁺. The presence of MWCNTs resulted in the improved ECL sensitivity and longer‐term stability of the modified electrode. The modified electrode showed a linear response to NADH in the concentration range of 1.0×10^?6 to 1.6×10^?5 M with a detection limit of 8.2×10^?7 M.     

Detection of DNA hybridization by ABEI electrochemiluminescence in DNA-chip compatible assembly

The electrochemiluminescence (ECL) of a luminol derivate (ABEI) generated both by a carbon electrode and a polypyrrole-coated carbon electrode was examined. It was found that the polypyrrole film (ppy) did not inhibit the ECL. After that, ABEI anchored on a single stranded DNA target (ODNt) has been used for the ECL detection of the hybridization between a complementary single stranded DNA probe (ODNp) covalently linked to a polypyrrole support and the ODNt. The ECL detection has been performed using a DNA sensor having a low surface concentration of ODNp probes, constituted of a polypyrrole copolymer electrosynthesized from a pyrrole-ODNp/pyrrole monomer ratio of 1/20,000.