Regioselective Transition‐Metal‐Free Allyl–Allyl Cross‐Couplings

Readily prepared allylic zinc halides undergo S_N2‐type substitutions with allylic bromides in a 1:1 mixture of THF and DMPU providing 1,5‐dienes regioselectively. The allylic zinc species reacts at the most branched end (γ‐position) of the allylic system furnishing exclusively γ,α′‐allyl–allyl cross‐coupling products. Remarkably, the double bond stereochemistry of the allylic halide is maintained during the cross‐coupling process. Also several functional groups (ester, nitrile) are tolerated. This cross‐coupling of allylic zinc reagents can be extended to propargylic and benzylic halides. DFT calculations show the importance of lithium chloride in this substitution.     

Versatile Homoallylic Boronates by Chemo‐, SN2′‐, Diastereo‐ and Enantioselective Catalytic Sequence of Cu−H Addition to Vinyl‐B(pin)/Allylic Substitution

A highly chemo‐, diastereo‐ and enantioselective catalytic method that efficiently combines a silyl hydride, vinyl‐B(pin) (pin=pinacolato) and (E)‐1,2‐disubstituted allylic phosphates is introduced. Reactions, best promoted by a Cu‐based complex with a chiral sulfonate‐containing N‐heterocyclic carbene, are broadly applicable. Aryl‐, heteroaryl‐, alkenyl‐, alkynyl‐ and alkyl‐substituted allylic phosphates may thus be converted to the corresponding homoallylic boronates and then alcohols (after C−B bond oxidation) in 46–91 % yield and in up to >98 % S_N2′:S_N2 ratio, 96:4 diastereomeric ratio and 98:2 enantiomeric ratio. The reasons why an NHC−Cu catalyst is uniquely effective (vs. the corresponding phosphine systems) and the basis for different trends in stereoselectivity are provided with the aid of DFT calculations.     

Enantioselective Trichloromethylation of MBH‐Fluorides with Chloroform Based on Silicon‐assisted C−F Activation and Carbanion Exchange Induced by a Ruppert–Prakash Reagent

Enantioselective trichloromethylation of Morita–Baylis–Hillman (MBH)‐type allylic fluorides with chloroform (HCCl₃) under organocatalysis was achieved with high to excellent enantioselectivities. Silicon‐assisted C?F bond activation by a Ruppert–Prakash reagent and direct activation of HCCl₃ by a carbanion exchange process with trifluoromethyl (CF₃) carbanion generated in situ from the Ruppert‐Prakash reagent realized the direct asymmetric trichloromethylation at a stereogenic allylic positon, without any help from transition metal catalysis, and under very mild conditions. Pre‐activation of HCCl₃ was not required. This method was extended to the direct enantioselective introduction of other C?H compounds such as alkyne, arene, indene, and FBSM without any pre‐activation under a metal‐free system.     

Computational study of 4‐fluoro‐4‐chloro‐ and 4‐fluoro‐4‐bromo‐4‐silathiacyclohexane S‐oxides: Effect of halogen on the SO→Si intramolecular coordination in the boat and twist conformers

Chair, twist, and boat conformations of axial and equatorial 4‐fluoro‐4‐chloro‐ and 4‐fluoro‐4‐bromo‐4‐silathiacyclohexane S‐oxides have been calculated at the second‐order Møller–Plesset (MP2) and density functional theory (DFT) levels of theory. The 2,5‐twist and 1,4‐boat conformers of the axial sulfoxides are stabilized by transannular interaction between the sulfinyl oxygen and silicon to give trigonal bipyramidal geometry at silicon. The stability of conformers containing pentacoordinate silicon is governed by the balance of the transannular sulfinyl oxygen–silicon coordination, nonbonded H…H and O…Hlg_ax interactions, electronegativity of Hlg_ax and nucleofugality of Hlg_eq, and may approach the stability of the lowest‐energy chair conformers. The effect of pentacoordination on the energy and geometry of Si‐halogenated 4‐silathiane S‐oxides is analyzed as a function of the halogen nature and position. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Auto‐Tandem Cooperative Catalysis Using Phosphine/Palladium: Reaction of Morita–Baylis–Hillman Carbonates and Allylic Alcohols

Auto‐tandem catalysis (ATC), in which a single catalyst promotes two or more mechanistically different reactions in a cascade pattern, provides a powerful strategy to prepare complex products from simple starting materials. Reported here is an unprecedented auto‐tandem cooperative catalysis (ATCC) for Morita–Baylis–Hillman carbonates from isatins and allylic carbonates using a simple Pd(PPh₃)₄ precursor. Dissociated phosphine generates phosphorus ylides and the Pd leads to π‐allylpalladium complexes, and they undergo a γ‐regioselective allylic–allylic alkylation reaction. Importantly, a cascade intramolecular Heck‐type coupling proceeds to finally furnish spirooxindoles incorporating a 4‐methylene‐2‐cyclopentene motif. Experimental results indicate that both Pd and phosphine play crucial roles in the catalytic Heck reaction. In addition, the asymmetric versions with either a chiral phosphine or chiral auxiliary are explored, and moderate results are obtained.     

Silicon‐ and Tin‐Based Cuprates: Now Catalytic in Copper!

Silicon‐ and tin‐containing molecules are versatile building blocks in organic synthesis. A stalwart method for their preparation relies on the stoichiometric use of silicon‐ and tin‐based cuprates, although a few copper(I)‐catalyzed or even copper‐free protocols have been known for decades. In this Concept, we describe our efforts towards copper(I)‐catalyzed carbon? silicon and also carbon? tin bond formations using soft bis(triorganosilyl) and bis(triorganostannyl) zinc reagents as powerful sources of nucleophilic silicon and tin. Conjugate addition, allylic substitution, and carbon? carbon multiple bond functionalization is now catalytic in copper!     

Anilines as C‐Nucleophiles in Ir‐Catalyzed Intramolecular Asymmetric Allylic Substitution Reactions

Anilines generally act as N‐nucleophiles in transition‐metal‐catalyzed allylic substitution reactions. In this paper, a highly enantioselective intramolecular Friedel–Crafts‐type allylic alkylation of aniline derivatives was realized by using an iridium catalyst derived from [Ir(cod)Cl]₂ and (R _a)‐BHPphos. Various tetrahydroisoquinilin‐5‐amines were obtained in moderate to good yields, excellent enantioselectivity and regioselectivity under mild reaction conditions. BHPphos=N ‐benzhydryl‐N ‐phenyldinaphthophosphoramidite.     

Transition‐Metal‐Free Borylation of Allylic and Propargylic Alcohols

The base‐catalyzed allylic borylation of tertiary allylic alcohols allows the synthesis of 1,1‐disubstituted allyl boronates, in moderate to high yield. The unexpected tandem performance of the Lewis acid–base adduct, [Hbase]⁺[MeO‐B₂pin₂]^? favored the formation of 1,2,3‐triborylated species from the tertiary allylic alcohols and 1‐propargylic cyclohexanol at 90 °C.     

Effect of oxidized silicon (SiOx) surfaces functionalization on real‐time PCR by Lab‐on‐a‐chip microdevices

There is a great need to improve the biocompatibility of silicon‐based lab‐on‐chip substrate materials for reliable quantitative analysis of biological solutions. These advanced microdevice surfaces need not only be biocompatible but also have surfaces of defined wettability characteristics. The inhibition of biomolecular activity due to microdevice surface interaction is common and can result in inaccurate results or decreased reaction yields. In this work we investigate different techniques for the chemical functionalization of oxidized silicon (SiO_x) surfaces in order to: (i) obtain defined hydrophobic/hydrophilic surfaces; and (ii) increase the efficiency of performing Real‐Time Polymerase Chain Reaction (PCR) on a silicon‐based lab‐on‐chip. Silicon oxide surfaces are functionalized by grafting alkylic chain silanes and poly(ethylene glycol) (PEG) chains to the surfaces, rendering them hydrophobic or hydrophilic. Functionalized surfaces are characterized through contact angle and atomic force microscopy (AFM) measurements, showing stable hydrophobic surfaces with contact angles of 69–78° and layer thicknesses of 11–15 Å and hydrophilic surfaces displaying contact angles of 5–6° and thicknesses of 22–52 Å. PCR experiments carried out directly on bare silicon oxide lab‐on‐chip surfaces show low yields of DNA amplification. Hydrophobic surfaces decrease the inhibition of PCR. Hydrophilic surfaces are a major improvement on the bare silicon oxide exhibiting the same maximum reaction yield as obtained with a standard thermocycler. We have found that the best results are associated with PEG modified surfaces, which prove very suitable for the fabrication of reliable PCR silicon lab‐on‐chips. Copyright © 2011 John Wiley & Sons, Ltd.     

One‐Pot Synthesis of O‐Allylhydroxylamines through the Organocatalytic Oxidation of Tertiary Allylic Amines Followed by a [2,3]‐Meisenheimer Rearrangement

A cheap, green, and highly efficient one‐pot method for the synthesis of O‐protected allylic alcohols is described. By utilizing 2,2,2‐trifluoroacetophenone as the organocatalyst and H₂O₂ as the oxidant, a variety of allylic amine N‐oxides were synthesized, which upon heating are converted to the final products through a [2,3]‐Meisenheimer rearrangement.     

Chemo‐ and regioselective allylic oxidation: Oxo‐derivatives of 2‐phospholene sugar analogs

A convenient and facile chemo‐ and regioselective oxidation of the allylic methylene group in a 2‐phospholene ring system afforded the novel carbonyl derivatives of 2‐phospholenes ( 2a–i ). The method gives high conversion and selectivity in the formation of allylic ketones. The advantages of this oxidation method in such a five‐membered pseudo sugar 2‐phospholene ring are mentioned, and the oxidation is examined on several substituted 2‐phospholenes ( 1a–i ). © 2003 Wiley Periodicals, Inc. Heteroatom Chem 14:320–325, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/hc.10154     

Copper‐Catalyzed γ‐Selective and Stereospecific Allylic Cross‐Coupling with Secondary Alkylboranes

The scope of the copper‐catalyzed coupling reactions between organoboron compounds and allylic phosphates is expanded significantly by employing triphenylphosphine as a ligand for copper, allowing the use of secondary alkylboron compounds. The reaction proceeds with complete γ‐E‐selectivity and preferential 1,3‐syn stereoselectivity. The reaction of γ‐silicon‐substituted allylic phosphates affords enantioenriched α‐stereogenic allylsilanes.     

Synthesis of Branched Alkylboronates by Copper‐Catalyzed Allylic Substitution Reactions of Allylic Chlorides with 1,1‐Diborylalkanes

Reported herein is a copper‐catalyzed S_N2′‐selective allylic substitution reaction using readily accessible allylic chlorides and 1,1‐diborylalkanes, a reaction which proceeds with chemoselective C?B bond activation of the 1,1‐diborylalkanes. In the presence of a catalytic amount of [Cu(IMes)Cl] [IMes=1,3‐bis(2,4,6‐trimethylphenyl)imidazole‐2‐ylidene] and LiOtBu as a base, a range of primary and secondary allylic chlorides undergo the S_N2′‐selective allylic substitution reaction to produce branched alkylboronates. The synthetic utilities of the obtained alkylboronates are also presented.     

Iridium‐Catalyzed Enantioselective Intermolecular Indole C2‐Allylation

The enantioselective intermolecular C2‐allylation of 3‐substituted indoles is reported for the first time. This directing group‐free approach relies on a chiral Ir‐(P, olefin) complex and Mg(ClO₄)₂ Lewis acid catalyst system to promote allylic substitution, providing the C2‐allylated products in typically high yields (40–99 %) and enantioselectivities (83–99 % ee) with excellent regiocontrol. Experimental studies and DFT calculations suggest that the reaction proceeds via direct C2‐allylation, rather than C3‐allylation followed by in situ migration. Steric congestion at the indole‐C3 position and improved π–π stacking interactions have been identified as major contributors to the C2‐selectivity.     

Transition‐Metal‐Free Coupling Reaction of Vinylcyclopropanes with Aldehydes Catalyzed by Tin Hydride

Donor–acceptor cyclopropanes are useful building blocks for catalytic cycloaddition reactions with a range of electrophiles to give various cyclic products. In contrast, relatively few methods are available for the synthesis of homoallylic alcohols through coupling of vinylcyclopropanes (VCPs) with aldehydes, even with transition‐metal catalysts. Here, we report that the hydrostannation of vinylcyclopropanes (VCPs) was effectively promoted by dibutyliodotin hydride (Bu₂SnIH). The resultant allylic tin compounds reacted easily with aldehydes. Furthermore, the use of Bu₂SnIH was effectively catalytic in the presence of hydrosilane as a hydride source, which established a coupling reaction of VCPs with aldehydes for the synthesis of homoallylic alcohols without the use of transition‐metal catalysts. In contrast to conventional catalytic reactions of VCPs, the presented method allowed the use of several VCPs in addition to conventional donor–acceptor cyclopropanes.     

Sulfuration and reversion reactions of brominated poly(isobutylene‐co‐isoprene)

The sulfuration and reversion products of brominated poly(isobutylene‐co‐isoprene) (BIIR) were characterized through the use of a model compound, brominated 2,2,4,8,8‐pentamethyl‐4‐nonene (BPMN). The reaction of BPMN with S₈ produced bisallylic polysulfides of various ranks, yielding sulfur bromide intermediates that likely contributed to the rapid oxidation of allylic sulfides into thiophenes. Reductive cure reversion to pentamethylnonene was also observed in the latter stages of vulcanization. The reaction of 2,2′‐dithiobisbenzothiazole with BIIR and BPMN produced a stable adduct that reduced the concentration of allylic bromide available for vulcanization. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1915–1926, 2003     

Zero‐Valent Amino‐Olefin Cobalt Complexes as Catalysts for Oxygen Atom Transfer Reactions from Nitrous Oxide

The synthesis and characterization of several zero‐valent cobalt complexes with a bis(olefin)‐amino ligand is presented. Some of these complexes proved to be efficient catalysts for the selective oxidation of secondary and allylic phosphanes, as well as diphosphanes, even with a direct P?P bond. With 5 mol % catalyst loadings the oxidations proceed under mild conditions (25–70 °C, 7–22 h, 2 bar N₂O) and afford good to excellent yields (65–98 %). In this process, the greenhouse gas N₂O is catalytically converted into benign N₂ and added‐value organophosphorus compounds, some of which are difficult to obtain otherwise.     

From the Lithium‐2‐anilide‐2‐fluoro‐1,3‐diaza‐2‐sila‐cyclopentene‐GaCl3 Adduct to 1,4,6‐Triaza‐5‐gallium‐7‐sila‐cyclo‐3‐heptene ‐ Experimental and Quantum‐chemical Results

The lithium salt (HC–NCMe₃)₂SiFNLiR ( 1 ) R = C₆H₃(2,6‐CHMe₂)₂ reacts with trichlorogallium under displacement of the lithium ion by GaCl₃ to give the adduct [(HC–NCMe₃)₂SiFN]^– [(GaCl₃)R·Li(thf)₄]⁺ ( 1 ). Compound 1 thermally loses LiCl and forms the bicyclic ring intermediates V and VI . Compound  VI adds the aniline H₂NC₆H₃(2,6‐CHMe₂)₂ and the unsaturated, seven‐membered ring compound –NCMe₃–CH₂–CH=NCMe₃GaCl₂–NR–SiFNHR– ( 2 ) is obtained. The addition is accompanied by an enamine‐imine‐tautomerism and proves the Lewis acid character of the silicon atom in an unknown 3‐center‐2‐electron interaction of one nitrogen atom with the silicon and gallium atoms. Quantum chemical calculations of the thermal isomerisation process and crystal structures of 1 and 2 are reported.     

Synthesis of (−)‐3‐Carene‐2,5‐dione via Allylic Oxidation of (+)‐3‐Carene

Activated carbon‐supported CuCl₂ (CuCl₂/AC) is a heterogeneous catalyst for the liquid‐phase selective allylic oxidation of (+)‐3‐carene with tert‐butyl hydroperoxide (TBHP) and O₂ to produce (?)‐3‐carene‐2,5‐dione. The possible reaction mechanism and the effects of different factors on the allylic oxidation were investigated. The optimal conditions are as follows: reaction temperature, 45 °C; molar ratio of CuCl₂ to (+)‐3‐carene, 1%; volume ratio of (+)‐3‐carene to TBHP, 1:3; and reaction time, 12 h. Under the optimal conditions, the conversion of (+)‐3‐carene reached 100%, whereas the selectivity for (?)‐3‐carene‐2,5‐dione reached 78%. The CuCl₂/AC catalyst was characterized via X‐ray diffraction, and the chemical structure of the target compound was identified via infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, mass spectrometry, and optical analysis.     

Regio‐ and Stereoselective Allylic Substitutions of Chiral Secondary Alkylcopper Reagents: Total Synthesis of (+)‐Lasiol, (+)‐13‐Norfaranal,and (+)‐Faranal

Chiral secondary alkylcopper reagents were prepared from chiral secondary alkyl iodides by a retentive I/Li exchange followed by a retentive transmetalation with CuBr?P(OEt)₃. Switching the solvent to THF significantly increased their configurational stability and made these copper reagents suitable for regioselective allylic substitutions. The optically enriched copper species underwent S_N2 substitutions with allylic bromides (up to >99 % S_N2 regioselectivity). The addition of ZnCl₂ and the use of chiral allylic phosphates allowed to switch the regioselectivity towards S_N2′ substitution (up to >99 % S_N2′ regioselectivity) and to perform highly selective anti‐S_N2′ substitutions with absolute control over two adjacent stereocenters. This method was applied in the total synthesis of the three ant pheromones (+)‐lasiol, (+)‐13‐norfaranal, and (+)‐faranal (up to 98:2 dr, 99 % ee).