Hydrolysis of antimony(III) fluoride complexes

Vibrational and ¹⁷O NMR spectroscopy in combination with quantum chemical calculations are used to investigate the hydrolysis of antimony(III) fluoride complexes. A hydrolytic decomposition of SbF₃ and [SbF₄]^? is accompanied by oligomerization with the formation of edge-and corner-connected dimers ([Sb₂O₂F₄]^2?, [Sb₂OF₈]^4?) and trimers ([Sb₃O₃F₆]^3?, [Sb₃OF₉]^2?) with bridging oxygen atoms. The hydrolysis of [SbF₄]^? is also characterized by the presence in the solution of a discrete cation of [SbF₅]^2? which is least hydrolized. Only a partial isomorphic substitution of fluoride ion by hydroxide one is possible, which is reflected in the composition of K₂Sb(OH)_xF_5?x (x = 0.3) crystals isolated from the fluoride aqueous solution.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。     

Sur de nouveaux ferrites oxyfluorés d'yttrium ou de gadolinium à structure grenat

The oxyfluoride garnets of formula Y₃Fe_5?xM_xO_12?xF_x and Gd₃Fe_5?xM_xO_12?xF_x (M = 3d transition element) result from partial substitution of O^2? by F^? in Y₃Fe₅O₁₂ and Gd₃Fe₅O₁₂ oxides. The cationic charge compensation is obtained by replacing the Fe³⁺ ions by divalent ions as Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺ or Zn²⁺ ions. The site occupied by some of these ions (Mn²⁺, Ni²⁺, Zn²⁺) is determined by magnetic or Mössbauer measurements.     

High Nuclearity Antimonato‐Polyoxovanadate Cluster {V15Sb6O42} as a Synthon for the Solvothermal in situ Generation of α‐ and β‐{V14Sb8O42} Isomers

New heteroatom polyoxovanadates (POVs) were synthesized by applying a water‐soluble high‐nuclearity cluster as new synthon. The [V₁₅Sb₆O₄₂]^6? cluster shell exhibiting D₃ symmetry was in situ transformed into completely different cluster shells, namely, the α‐[V₁₄Sb₈O₄₂]^4? isomer with D_2d and the β‐[V₁₄Sb₈O₄₂]^4? isomer with D_2h symmetry. The solvothermal reaction of {Ni(en)₃}₃[V₁₅Sb₆O₄₂(H₂O)_x] ? 15 H₂O (x=0 or 1; en=ethylenediamine) in water led to the crystallization of [{Ni(en)₂}₂V₁₄Sb₈O₄₂] ? 5.5 H₂O containing the β‐isomer. The addition of [Ni(phen)₃](ClO₄)₂ ? 0.5 H₂O (phen=1,10‐phenanthroline) to the reaction slurry gave the new compound {Ni(phen)₃}₂[V₁₄Sb₈O₄₂] ? phen ? 12 H₂O with the α‐isomer. Both transformation reactions are complex due the change of symmetry, the chemical composition, and rearrangement of the VO₅ square pyramids and Sb₂O₅ handle‐like moieties.     

Enzyme mimics of spinel-type CoxNi1−xFe2O4 magnetic nanomaterial for eletroctrocatalytic oxidation of hydrogen peroxide

A series of spinel-type Co_xNi_1−xFe₂O₄ (x = 0, 0.2, 0.4, 0.5, 0.6, 0.8, 1.0) magnetic nanomaterials were solvothermally synthesized as enzyme mimics for the eletroctrocatalytic oxidation of H₂O₂. X-ray diffraction and scanning electron microscope were employed to characterize the composition, structure and morphology of the material. The electrochemical properties of spinel-type Co_xNi_1−xFe₂O₄ with different (Co/Ni) molar ratio toward H₂O₂ oxidation were investigated, and the results demonstrated that Co_0.5Ni_0.5Fe₂O₄ modified carbon paste electrode (Co_0.5Ni_0.5Fe₂O₄/CPE) possessed the best electrocatalytic activity for H₂O₂ oxidation. Under optimum conditions, the calibration curve for H₂O₂ determination on Co_0.5Ni_0.5Fe₂O₄/CPE was linear in a wide range of 1.0 × 10⁻⁸–1.0 × 10⁻³ M with low detection limit of 3.0 × 10⁻⁹ M (S/N = 3). The proposed Co_0.5Ni_0.5Fe₂O₄/CPE was also applied to the determination of H₂O₂ in commercial toothpastes with satisfactory results, indicating that Co_xNi_1−xFe₂O₄ is a promising hydrogen peroxidase mimics for the detection of H₂O₂.     

g-C3N4/双钙钛矿复合材料的制备及氧催化性能

通过溶胶-凝胶法制备出不同Ni掺杂比例的双钙钛矿Sr_2Ni_xCo_(2-x)O_6(x=0.2,0.4,0.6,0.8),通过热分解法制备出具有层状结构的纳米颗粒g-C_3N_4,并制备其复合物催化剂。将双钙钛矿和g-C_3N_4分别制备成双功能电极片,用于测试其对氧还原(ORR)和氧析出(OER)的催化活性,然后选取具有最佳氧催化活性的Ni掺杂比例x=0.4的双钙钛矿与一定重量比例的g-C_3N_4进行复合,测试复合催化剂的氧催化活性。结果表明,复合后的催化剂催化效果明显优于单一催化剂,当g-C_3N_4添加量占双钙钛矿的30%(w/w)时复合催化剂催化氧还原反应的最大电流密度为395.7 mA·cm~(-2)(-0.6 V vs Hg/HgO),氧析出反应的最大电流密度为372.0mA·cm~(-2)(1 V vs Hg/HgO),这表明g-C_3N_4与Sr_2Ni_(0.4)Co_(1.6)O_6复合后协同催化能够提高双钙钛矿的氧催化活性。     

Über das Jod(V,VII)-oxid J2O6

On the Iodine(V, VII) Oxide I₂O₆ The existence of the compound I₂O₆ is confirmed. It has been prepared by dehydration of a solution of H₅IO₆ and HIO₃ in 95% H₂SO₄ by addition of oleum. Following an earlier method the compound has also been obtained by thermal decomposition of H₅IO₆. I₂O₆ is a chemical species as concluded from its individual Raman spectrum. Diamagnetism proves the formulation as a mixed-valence iodine(V, VII) oxide. According to the vibrational spectrum the compound is nearly described as an iodyl periodate IO₂⁺IO₄^?.     

Porous microtubes of nickel-cobalt double oxides as non-enzymatic hydrogen peroxide sensors

Non-enzymatic electrochemical sensors for the determination of hydrogen peroxide(H_2 O_2) have attracted more and more concerns.A series of nickel and cobalt double oxides(Ni_xCo_y-DO) with the different ratios of Ni/Co have been prepared by a polyol-mediated solvothermal method for H_2 O_2 detection.The obtained products exhibit honeycomb-like open porous microtubes constituted with the low-dimensional nanostructured Ni_xCo_y-DO blocks after the calcination treatment.Compared with nickel oxides,the introduced Co ions in Ni_xCo_y-DO can induce the production of surficial oxygen vacancies,and further enhance the electrode surface activity.In particular,the NiCo-DO sample(with an atomic ratio of Ni/Co=4:3) shows the richest surficial oxygen vacancies and presents the highest H_2 O_2 detection activity among all the as-prepared samples,demonstrating an excellent sensitivity of698.60 μAL mmol ~1 cm~(-2)(0～0.4 mmol/L),low detection limit(0.28 μmol/L,S/N=3),as well as long stability,high selectivity and good reproducibility.This work lends a new impetus to the potential application of double metal oxides for the next generation of non-enzymatic sensors.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Lithium-substituted cobalt oxide spinels LixM1−xCo2O4 (M = Co2+, Zn2+; 0 ≤ x ≤ 0.4)

Substitution of Li⁺ into Co₃O₄ and ZnCo₂O₄ gives rise to the solid solution series Li_xM_1?xCo₂O₄ (M = Co²⁺ or Zn²⁺) having the spinel structure upto x = 0.4. X-Ray diffraction intensities show that the spinel solid solutions are likely to have the following cation distributions: (Co²⁺)_t[Li⁺_xCo³⁺_2?3xCo⁴⁺_2x]₀O₄ and (Zn²⁺_1?xCo²⁺_x)_t[Li⁺_xCo³⁺_2?3xCo⁴⁺_2x]₀O₄. Electrical resistivity and Seebeck coefficient data indicate that the electron transport in these systems occurs by a small-polaron hopping mechanism.     

Imine Gels Based on Ferrocene and Porphyrin and Their Electrocatalytic Property

A series of porphyrin‐based imine gels have been synthesized via dynamic covalent gelation between 5,10,15,20‐tetra(4‐aminophenyl)‐21H,23H‐porphyrin (H₂TAPP) derivatives and various aldehyde compounds. The porphyrin‐ferrocene imine gels based on MTAPP (M=H₂, Ni²⁺, Co²⁺, Pd²⁺ and Zn²⁺) and ferrocene‐1,1′‐dicarbaldehyde (NA) display efficient HER, OER and ORR activities in alkaline media. Among the gels, CoTAPP‐NA shows an HER current density of 10 mA cm^?2 at low overpotential of 470 mV and small Tafel slope of 110 mV decade^?1 in alkaline media. CoTAPP‐NA also exhibits OER catalytic activity with low overpotential (416 mV for 10 mA cm^?2). CoTAPP‐NA shows ability in overall water splitting in alkaline media. In addition, CoTAPP‐NA exhibits onset potential (E_p) of 0.95 V and half‐wave potential (E_1/2) of 0.84 V in 1.0 mol L^?1 KOH solution for oxygen reduction. Moreover, the gel catalyst shows good stability.     

Theoretical Study of the Reactions M++CH3F (M=Ge,As, Se,Sb)

CASSCF–MRMP2 calculations have been carried out to analyze the reactions of the methyl fluoride molecule with the atomic ions Ge⁺, As⁺, Se⁺ and Sb⁺. For these interactions, potential energy curves for the low‐lying electronic states were calculated for different approaching modes of the fragments. Particularly, those channels leading to C? H and C? F oxidative addition products, H₂FC? M? H⁺ and H₃C? M? F⁺, respectively were explored, as well as the paths which evolve to the abstraction (M? F⁺+CH₃) and the elimination (CH₂M⁺+HF) asymptotes. For the reaction Ge⁺+CH₃F the only favorable channel leads to fluorine abstraction by the ion. As⁺ and Sb⁺ can react with CH₃F along pathways yielding stable addition products. However, a viable path joining the oxidative addition product H₃C? M? F⁺ with the elimination asymptote CH₂M⁺+HF was found for the reaction of the fluorocarbon compound with As⁺. No favorable channels were detected for the interaction of fluoromethane with Se⁺. The results discussed herein allow rationalizing some of the experimental data found for these interactions through gas‐phase mass spectrometry.     

Foamlike Porous Spinel MnxCo3−xO4 Material Derived from Mn3[Co(CN)6]2⋅nH2O Nanocubes: A Highly Efficient Anode Material for Lithium Batteries

A new facile strategy has been designed to fabricate spinel Mn_xCo_3?xO₄ porous nanocubes, which involves a morphology‐conserved and pyrolysis‐induced transformation of Prussian Blue Analogue Mn₃[Co(CN)₆]₂ ? nH₂O perfect nanocubes. Owing to the release of CO₂ and N_xO_y in the process of interdiffusion, this strategy can overcome to a large extent the disadvantage of the traditional ceramic route for synthesis of spinels, and Mn_xCo_3?xO₄ with foamlike porous nanostructure is effectively obtained. Importantly, when evaluated as an electrode material for lithium‐ion batteries, the foamlike Mn_xCo_3?xO₄ porous nanocubes display high specific discharge capacity and excellent rate capability. The improved electrochemical performance is attributed to the beneficial features of the particular foamlike porous nanostructure and large surface area, which reduce the diffusion length for Li⁺ ions and enhance the structural integrity with sufficient void space for buffering the volume variation during the Li⁺ insertion/extraction.     

Bimetallic cobalt-nickel coordination polymer electrocatalysts for enhancing oxygen evolution reaction

Coordination polymers（CPs） have great potential to be used in electrocatalysis owing to their designable compositions and structures. It is highly challenging to apply CPs as electrocatalysts for oxygen evolution reaction（OER） on account of insufficient catalytic efficiency and relatively poor stability of current electrocatalysts. Herein, through a mixed-metal strategy, one-dimensional Co_xNi_1-x-HIPA with dual active sites was synthesized and studied for OER electrocatalyst...     

Metallkomplexe der Phosphinsäuren. XVIII. Ansa- und Oligokomplexe bifunktioneller Dithiophosphinsäuren

Metal Complexes of Phosphinic Acids. XVIII. Ansa- and Oligo-Complexes of Bifunctional Dithiophosphinic Acids The influence of R′ in the bifunctionell chelate ligands ^?S(S)P(R)? R′? (R)P(S)S^? on the association of their planar Ni^II and tetrahedral Co^II complexes is investigated by vapour pressure osmometry and in the case of diamagnetic Ni^II compounds also by ³¹P-NMR spectroscopy. While insoluble coordination polymers [S₂P(R)? R′? (R)PS₂M]_x (M = Ni^II, Co^II) are formed with R′ = p-(C₂H₄)₂C₆H₄ it can be shown, that in solutions of the complexes with R′ = o-(C₂H₄)₂C₆H₄ and R′ = o-(C₃H₆)₂C₆H₄ there exists an association equilibrium comprehending oligomers with n ? x. Above all in the latter case steric conditions seem to favour intramolecular chelating and thus formation of ansa-type complexes. Synthesis of the ligands and the complexes is described.     

Synthesis of Highly Active and Stable Spinel‐Type Oxygen Evolution Electrocatalysts by a Rapid Inorganic Self‐Templating Method

Composition‐adjustable spinel‐type metal oxides, Mn_xCo_3?xO_4?δ (x=0.8–1.4), were synthesized in ethanol solutions by a rapid inorganic self‐templating mechanism using KCl nanocrystals as the structure‐directing agent. The Mn_xCo_3?xO_4?δ materials showed ultrahigh oxygen evolution activity and strong durability in alkaline solutions, and are capable of delivering a current density of 10 mA cm^?2 at 1.58 V versus the reversible hydrogen electrode in 0.1 M KOH solution, which is superior in comparison to IrO₂ catalysts under identical experimental conditions, and comparable to the most active noble‐metal and transition‐metal oxygen evolution electrocatalysts reported so far. The high performance for catalytic oxygen evolution originates from both compositional and structural features of the synthesized materials. The moderate content of Mn doping into the spinel framework led to their improved electronic conductivity and strong oxidizing ability, and the well‐developed porosity, accompanied with the high affinity between OH^? reactants and catalyst surface, contributed to the smooth mass transport, thus endowing them with superior oxygen evolution activity.     

Sm0.5Sr0.5Co1−xNixO3−δ—A Novel Bifunctional Electrocatalyst for Oxygen Reduction/Evolution Reactions

The development of non-precious metal catalysts with excellent bifunctional activities is significant for air–metal batteries. ABO₃-type perovskite oxides can improve their catalytic activity and electronic conductivity by doping transition metal elements at B sites. Here, we develop a novel Sm_0.5Sr_0.5Co_1−xNi_xO_3−δ (SSCN) nanofiber-structured electrocatalyst. In 0.1 M KOH electrolyte solution, Sm_0.5Sr_0.5Co_0.8Ni_0.2O_3−δ (SSCN82) with the optimal Co: Ni molar ratio exhibits good electrocatalytic activity for OER/ORR, affording a low onset potential of 1.39 V, a slight Tafel slope of 123.8 mV dec⁻¹, and a current density of 6.01 mA cm⁻² at 1.8 V, and the ORR reaction process was four-electron reaction pathway. Combining the morphological characteristic of SSCN nanofibers with the synergistic effect of cobalt and nickel with a suitable molar ratio is beneficial to improving the catalytic activity of SSCN perovskite oxides. SSCN82 exhibits good bi-functional catalytic performance and electrochemical double-layer capacitance.     

纳米镍钴铁氧体空心微球的制备与性能

以乙二醇为溶剂,氯化铁、氯化钴、氯化镍和醋酸铵为反应试剂,采用溶剂热法制备纳米Ni_xCo_1-xFe₂O₄(x=0、0.3、0.5、0.7、1)铁氧体空心微球,研究镍含量对铁氧体空心球的磁性与吸波性能的影响。借助X-射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、振动样品磁强计(VSM)和网络分析仪对试样的物相组成、微观形貌和电磁特性进行表征。结果表明制备的镍钴铁氧体为尖晶石结构,且形貌为空心球,粒径在200 nm左右。当x=0时,镍钴铁氧体空心球饱和磁化强度最大为81.7 emu·g^-1,反射损耗在1 658.8 MHz有最小值为-16.9 dB。     

The relationship between ligand structures and their CoII and NiII complexes: Synthesis and characterization of novel dimeric CoII/CoIII complexes of bis(thiosemicarbazone)

4,6-Diacetylresorcinol serves as a starting point for the generation of multidentate S/N/O or O/N/O symmetrical chelating agents by condensation with thiosemicarbazide or semicarbazide to yield the corresponding bis(thiosemicarbazone) H₄L¹ or bis(semicarbazone) H₄L², respectively. Reaction of H₄L¹ and H₄L² with M(NO₃)₂·6H₂O (M?=?Co or Ni) afforded dimeric complexes for H₄L¹ and binuclear complexes for H₄L², revealing the tendency of S to form bridges. The dimeric cobalt complexes of H₄L¹ are very interesting in that they contain Co^II/Co^III, side/side, low-spin octahedral coordinated Co^III-ions and high-spin square-planar coordinated Co^II-ions. These complexes have the general formula [(H₂L¹)₂Co₂(H₂O) (NO₃)]·nEtOH. Arguments supporting these anomalous Co^II/Co^III structures are based on a pronounced decrease in their magnetic moments, elemental and thermal analyses, visible and IR spectra, as well as their unreactivity towards organic bases such as 1,10-phenanthroline (phen), 2,2′-bipyridine (Bpy), N,N,N′,N′-tetramethylethylenediamine (Tmen) and 8-hydroxyquinoline (oxine, Ox). The dimeric octahedral Ni^II complex [(H₂L¹)₂Ni₂(H₂O)₄]·3H₂O showed higher reactivity towards phen and Bpy and formed adducts; [(HL¹)Ni₂(B)(H₂O)₅] NO₃ (B?=?phen or Bpy). In the presence of oxine, the dimeric brown paramagnetic octahedral complex [(H₂L¹)₂Ni₂(H₂O)₄]·3H₂O was transformed to the dimeric brick-red diamagnetic square-planar complex [(H₃L¹)₂Ni₂](NO₃)₂. The latter showed dramatic behavior in its ¹H NMR spectrum in DMSO-d ₆, which was explained on the basis of H⁺-transfer. By contrast, the binuclear Ni^II–H₄L² complex (11) showed higher reactivity towards phen, Bpy and oxine. These reactions afforded mixed dimeric complexes having the molar ratio 2?:?2?:?1 (Ni^II?:?H₄L²?:?base). The binuclear Co^II–H₄L² complex afforded an adduct with phen and trinuclear complexes with Bpy and oxine. All complexes were found to be unreactive towards Tmen. Structural characterization was achieved by elemental and thermal analyses, spectral data (electronic, IR, mass and ¹H NMR spectra) and conductivity and magnetic susceptibility measurements.