Synthesis,Characterization, Redox Properties,and Photodynamics of Donor–Acceptor Nanohybrids Composed of Size‐Controlled Cup‐Shaped Nanocarbons and Porphyrins

Cup‐shaped nanocarbons (CNC) generated by the electron‐transfer reduction of cup‐stacked carbon nanotubes have been functionalized with porphyrins (H₂P) as light‐capturing chromophores. The resulting donor–acceptor nanohybrid has been characterized by thermogravimetric analysis (TGA), Raman and IR spectroscopy, transmission electron microscopy, elemental analysis, and UV/Vis spectroscopy. The weight of the porphyrins attached to the cup‐shaped nanocarbons was determined as 20 % by TGA and elemental analysis. The UV/Vis absorption spectrum of CNC? (H₂P)_n in DMF agrees well with that obtained by the superposition of reference porphyrin (ref‐H₂P) and cup‐shaped nanocarbons. The photoexcitation of the CNC? (H₂P)_n nanohybrid results in formation of the charge‐separated (CS) state to attain the longest CS lifetime (0.64±0.01 ms) ever reported for donor–acceptor nanohybrids, which may arise from efficient electron migration following the charge separation. The formation of a radical ion pair was detected directly by electron spin resonance (ESR) measurements under photoirradiation of CNC? (H₂P)_n with a high‐pressure mercury lamp in frozen DMF at 153 K. The observed ESR signal at g=2.0044 agrees with that of ref‐H₂P^.+ produced by one‐electron oxidation with [Ru(bpy)₃]³⁺ in deaerated CHCl₃, indicating the formation of H₂P^.+. The electron‐acceptor ability of the reference CNC compound (ref‐CNC) was also examined by the electron‐transfer reduction of ref‐CNC by a series of semiquinone radical anions.     

Self‐Assembled Hexanuclear Organometallic Cages: Synthesis,Characterization, and Host–Guest Properties

A series of iridium‐ and rhodium‐based hexanuclear organometallic cages containing 2,5‐dichloro‐3,6‐dihydroxy‐1,4‐benzoquinone, 9,10‐dihydroxy‐1,4‐anthraquinone, and 6,11‐dihydroxynaphthacene‐5,12‐dione ligands were synthesized from the self‐assembly of the corresponding molecular “clips” and 2,4,6‐tri(4‐pyridyl)‐1,3,5‐triazine ligands in good yields. These organometallic cages can form inclusion systems with a wide variety of π‐donor substrates, including coronene, pyrene, [Pt(acac)₂], and hexamethoxytriphenylene. The 1:1 complexation of the resulting supramolecular assemblies was confirmed by ¹H NMR spectroscopy. Large complexation shifts (Δδ>1 ppm) were observed in the ¹H NMR spectra of guests in the presence of cage [Cp*₆M₆(μ‐DHNA)₃(tpt)₂](OTf)₆ ( 6a ; M=Ir, tpt=2,4,6‐tri(4‐pyridyl)‐1,3,5‐triazine). The formation of discrete 1:1 donor–acceptor complexes, pyrene ?6 b (M=Rh), coronene ?6 a , coronene ?6 b , and [Pt(acac)₂] ?6 a was confirmed by their single‐crystal X‐ray analyses. In these systems, the most important driving force for the formation of guest–host complexes is clearly the donor–acceptor π???π stacking interaction, including charge‐transfer interactions between the electron‐donating and electron‐accepting aromatic components. These structures provide compelling evidence for the existence of strong attractive forces between the electron‐deficient triazine core and electron‐rich guest. The results presented here may provide useful guidance for designing artificial receptors for functional biomolecules.     

Organic Dyes Containing Pyrenylamine‐Based Cascade Donor Systems with Different Aromatic π Linkers for Dye‐Sensitized Solar Cells: Optical,Electrochemical, and Device Characteristics

New organic dyes containing pyrenylamine donors in a cascade arrangement and cyanoacrylic acid acceptors have been synthesized and characterized by optical, electrochemical, and theoretical studies. The dyes inherit a D ‐π¹‐D ‐π²‐A (D=donor, A=acceptor) molecular architecture where the π linkers π¹ are changed from phenyl to biphenyl and fluorene, whereas the π linker π² that connects the donor fragment with the acceptor is a phenyl unit. The conjugation pathway linking the two donor segments has been found to play a major role in the optical and electrochemical properties. Shorter π linkers such as phenyl groups facilitate the donor–acceptor interaction while the nonplanar biphenyl spacer decreases the electronic communication between the donors and enhances the oxidation propensity of the corresponding dye. All the dyes display an intense longer wavelength electronic transition,which is attributable to the amine‐to‐cyanoacrylic acid charge transfer. The extinction coefficient of this peak grows dramatically on increasing the conjugation pathway length between the two donor segments. The dyes were used as sensitizers in nanocrystalline TiO₂‐based dye‐sensitized solar cells (DSSCs) and the cascade donor system contributed to the enhancement in the device efficiency due to favorable absorption and redox properties.     

A Systematic Study of Fluorescence‐Based Detection of Nitroexplosives and Other Aromatics in the Vapor Phase by Microporous Metal–Organic Frameworks

A systematic study is conducted on four microporous metal–organic framework compounds built on similar ligands but different structures, namely [Zn₃(bpdc)₃(bpy)] ? 4 DMF ? H₂O ( 1 ), [Zn₃(bpdc)₃(2,2′dmbpy)] ? 4 DMF ? H₂O ( 2 ), [Zn₂(bpdc)₂(bpe)] ? 2 DMF ( 3 ), and [Zn(bpdc)(bpe)] ? DMF ( 4 ) (bpdc=4,4′‐biphenyldicarboxylate; bpy=4,4′‐bipyridine; 2,2′dmbpy=2,2′‐dimethyl‐4,4′bipyridine; bpe=1,2‐bis(4‐pyridyl)ethane; DMF=N,N′‐dimethylformamide) to investigate their photoluminescence properties and sensing/detection behavior upon exposure to vapors of various aromatic molecules (analytes) including nitroaromatic explosives. The results show that all four compounds are capable of detecting these molecules in the vapor phase through fluorescence quenching or enhancement. Both electrochemical measurements and theoretical calculations are performed to analyze the analyte–MOF interactions, to explain the difference in signal response by different analytes, and to understand the mechanism of fluorescence quenching or enhancement observed in these systems. Interestingly, compound 3 also shows an emission frequency shift when exposed to benzene (BZ), chlorobenzene (ClBZ), and toluene (TO), which provides an additional variable for the identification of different analytes in the same category.     

Interaction of Aromatic Derivatives with Single‐Walled Carbon Nanotubes

Fluorescence of semiconducting single‐walled carbon nanotubes (SWNTs) normally exhibits diameter‐dependent oxidative quenching behaviour. This behaviour can be changed substantially to become an almost diameter‐independent quenching phenomenon in the presence of electron‐withdrawing nitroaromatic compounds, including o‐nitrotoluene, 2,4‐dinitrotoluene, and nitrobenzene. This change is observed for SWNTs suspended either in sodium dodecyl sulfate or in Nafion upon titration with hydrogen peroxide. Benzene, toluene, phenol, and nitromethane do not show such change. These findings suggest the possibility of forming an electron donor–acceptor complex between SWNTs and nitroaromatic compounds, resulting in leveling the redox potential of different SWNT species. The observation appears to provide a new method for modifying the electrochemical potentials of SWNTs through donor–acceptor complex formation.     

Surface Charge‐Transfer Doping of Graphene Nanoflakes Containing Double‐Vacancy (5‐8‐5) and Stone–Wales (55‐77) Defects through Molecular Adsorption

The adsorption of six electron donor–acceptor (D/A) organic molecules on various sizes of graphene nanoflakes (GNFs) containing two common defects, double‐vacancy (5‐8‐5) and Stone–Wales (55‐77), are investigated by means of ab initio DFT [M06‐2X(‐D3)/cc‐pVDZ]. Different D/A molecules adsorb on a defect graphene (DG) surface with binding energies (ΔE_b) of about ?12 to ?28 kcal mol^?1. The ΔE_b values for adsorption of molecules on the Stone–Wales GNF surface are higher than those on the double vacancy GNF surface. Moreover, binding energies increase by about 10 % with an increase in surface size. The nature of cooperative weak interactions is analyzed based on quantum theory of atoms in molecules, noncovalent interactions plot, and natural bond order analyses, and the dominant interaction is compared for different molecules. Electron density population analysis is used to explain the n‐ and p‐type character of defect graphene nanoflakes (DGNFs) and also the change in electronic properties and reactivity parameters of DGNFs upon adsorption of different molecules and with increasing DGNF size. Results indicate that the HOMO–LUMO energy gap (E_g) of DGNFs decreases upon adsorption of molecules. However, by increasing the size of DGNFs, the E_g and chemical hardness of all complexes decrease and the electrophilicity index increases. Furthermore, the values of the chemical potential of acceptor–DGNF complexes decrease with increasing size, whereas those of donor–DGNF complexes increase.     

Synthesis and Characterization of Donor–π‐Acceptor‐Based Porphyrin Sensitizers: Potential Application of Dye‐Sensitized Solar Cells

New porphyrin sensitizers based on donor–π‐acceptor (D‐π‐A) approach have been designed, synthesized, characterized by various spectroscopic techniques and their photovoltaic properties explored. N,N′‐Diphenylamine acts as donor, the porphyrin is the π‐spacer, and either carboxylic acid or cyanoacryclic acid acts as acceptor. All compounds were characterized by using ¹H NMR spectroscopy, ESI‐MS, UV–visible emission spectroscopies as well as electrochemical methods. The presence of aromatic groups between porphyrin π‐plane and acceptor group push the absorption of both Soret and Q‐bands of porphyrin towards the red region. The electrochemical properties suggests that LUMO of these sensitizers above the TiO₂ conduction band. Finally, the device was fabricated using liquid redox electrolyte (I^?/I₃^?) and its efficiency was compared with that of a leading sensitizer.     

Experimental and Computational Studies of a Multi‐Electron Donor–Acceptor Ligand Containing the Thiazolo[5,4‐d]thiazole Core and its Incorporation into a Metal–Organic Framework

A ligand containing the thiazolo[5,4‐d]thiazole (TzTz) core (acceptor) with terminal triarylamine moieties (donors), N,N′‐(thiazolo[5,4‐d]thiazole‐2,5‐diylbis(4,1‐phenylene))bis(N‐(pyridine‐4‐yl)pyridin‐4‐amine ( 1 ), was designed as a donor–acceptor system for incorporation into electronically active metal–organic frameworks (MOFs). The capacity for the ligand to undergo multiple sequential oxidation and reduction processes was examined using UV/Vis‐near‐infrared spectroelectrochemistry (UV/Vis‐NIR SEC) in combination with DFT calculations. The delocalized nature of the highest occupied molecular orbital (HOMO) was found to inhibit charge‐transfer interactions between the terminal triarylamine moieties upon oxidation, whereas radical species localized on the TzTz core were formed upon reduction. Conversion of 1 to diamagnetic 2+ and 4+ species resulted in marked changes in the emission spectra. Incorporation of this highly delocalized multi‐electron donor–acceptor ligand into a new two‐dimensional MOF, [Zn(NO₃)₂( 1 )] ( 2 ), resulted in an inhibition of the oxidation processes, but retention of the reduction capability of 1 . Changes in the electrochemistry of 1 upon integration into 2 are broadly consistent with the geometric and electronic constraints enforced by ligation.     

Precise Control of Intramolecular Charge‐Transport: The Interplay of Distance and Conformational Effects

A new series of donor–bridge–acceptor (D–B–A) compounds consisting of π‐conjugated oligofluorene (oFL) bridges between a ferrocene (Fc) electron‐donor and a fullerene (C₆₀) electron‐acceptor have been synthesized. In addition to varying the length of the bridge (i.e., mono‐ and bi‐fluorene derivatives), four different ways of linking ferrocene to the bridge have been examined. The Fc moiety is linked to oFL: 1) directly without any spacer, 2) by an ethynyl linkage, 3) by a vinylene linkage, and 4) by a p‐phenylene unit. The electronic interactions between the electroactive species have been characterized by cyclic voltammetry, absorption, fluorescence, and transient absorption spectroscopy in combination with quantum chemical calculations. The calculations reveal exceptionally close energy‐matching between the Fc and the oFL units, which results in strong electronic‐coupling. Hence, intramolecular charge‐transfer may easily occur upon exciting either the oFLs or Fcs. Photoexcitation of Fc–oFL–C₆₀ conjugates results in transient radical‐ion‐pair states. The mode of linkage of the Fc and FL bridge has a profound effect on the photophysical properties. Whereas intramolecular charge‐separation is found to occur rather independently of the distance, the linker between Fc and oFL acts (at least in oFL) as a bottleneck and significantly impacts the intramolecular charge‐separation rates, resulting in beta values between β_CS 0.08 and 0.19 Å^?1. In contrast, charge recombination depends strongly on the electron‐donor–acceptor distance, but not at all on the linker. A value of β_CR (0.35±0.01 Å^?1) was found for all the systems studied. Oligofluorenes prove, therefore, to be excellent bridges for probing how small structural variations affect charge transport in D–B–A systems.     

Tetrathiafulvalene‐Fused Porphyrins via Quinoxaline Linkers: Symmetric and Asymmetric Donor–Acceptor Systems

A tetrathiafulvalene (TTF) donor is annulated to porphyrins (P) via quinoxaline linkers to form novel symmetric P–TTF–P triads 1 a – c and asymmetric P–TTF dyads 2 a , b in good yields. These planar and extended π‐conjugated molecules absorb light over a wide region of the UV/Vis spectrum as a result of additional charge‐transfer excitations within the donor–acceptor assemblies. Quantum‐chemical calculations elucidate the nature of the electronically excited states. The compounds are electrochemically amphoteric and primarily exhibit low oxidation potentials. Cyclic voltammetric and spectroelectrochemical studies allow differentiation between the TTF and porphyrin sites with respect to the multiple redox processes occurring within these molecular assemblies. Transient absorption measurements give insight into the excited‐state events and deliver corresponding kinetic data. Femtosecond transient absorption spectra in benzonitrile may suggest the occurrence of fast charge separation from TTF to porphyrin in dyads 2 a , b but not in triads 1 a – c . Clear evidence for a photoinduced and relatively long lived charge‐separated state (385 ps lifetime) is obtained for a supramolecular coordination compound built from the ZnP–TTF dyad and a pyridine‐functionalized C₆₀ acceptor unit. This specific excited state results in a (ZnP–TTF)^?+ ??? (C₆₀py)^?? state. The binding constant of Zn^II ??? py is evaluated by constructing a Benesi–Hildebrand plot based on fluorescence data. This plot yields a binding constant K of 7.20×10⁴ M ^?1, which is remarkably high for bonding of pyridine to ZnP.     

Photoluminescent and Liquid‐Crystalline Properties of Donor–Acceptor‐Type 2,5‐Diarylthiazoles

The synthesis of donor–acceptor‐type 2,5‐diarylthiazoles that bear electron‐donating N,N‐dialkylamine and electron‐withdrawing cyano groups at the 2‐ and 5‐position, respectively, were carried out with transition‐metal‐catalyzed C? H arylation reactions developed by us. The compounds were synthesized by the C? H arylation of unsubstituted thiazole at the 2‐position with a palladium/copper catalyst in the presence of tetrabutylammonium fluoride (TBAF) as an activator. Further C? H arylation of the 2‐arylated thiazole at the 5‐position was carried out by the palladium‐catalyzed reaction in the presence of silver(I) fluoride to afford the donor–acceptor‐type 2,5‐diarylthiazoles with N,N‐dialkylamine groups of different chain lengths. The UV/Vis absorption, photoluminescence, and electrochemical behavior were similar regardless of chain length, whereas liquid‐crystalline behavior and thermal characteristics were found to be dependent on the alkyl‐chain length. The compounds with N,N‐diethylamine or N‐butyl‐N‐methyl groups showed a stable liquid‐crystalline phase over a wide temperature range as well as higher stability to thermal decomposition.     

Extended Conjugated Donor–Acceptor Molecules with E‐(1,2‐Difluorovinyl) and Diketopyrrolopyrrole (DPP) Moieties toward High‐Performance Ambipolar Organic Semiconductors

Two diketopyrrolopyrrole (DPP)‐based donor–acceptor (D–A) conjugated molecules, DPP‐F and DPP‐2F, which contain E‐(1,2‐difluorovinyl) moieties, are reported. The LUMO energies of DPP‐F and DPP‐2F were estimated to be ?3.49 and ?3.70 eV, respectively, based on their redox potentials and absorption spectral data; these values were clearly lowered because of the incorporation of electron‐withdrawing E‐(1,2‐difluorovinyl) moieties. Organic field‐effect transistors (OFETs) with thin films of DPP‐F and DPP‐2F were successfully fabricated with conventional techniques. Based on the respective transfer and output characteristics measured in an inert atmosphere, thin films of DPP‐2F display ambipolar semiconducting behavior with hole and electron mobilities reaching 0.42 and 0.80 cm² V^?1 s^?1, respectively. The as‐prepared OFET of DPP‐2F already shows high hole and electron mobilities that are not influenced remarkably by thermal annealing. For thin films of DPP‐F, only p‐type semiconducting behavior was observed in both an inert atmosphere and air, and the hole mobility increased to 0.1 cm² V^?1 s^?1 after thermal annealing. XRD and AFM studies were performed with thin films of DPP‐F and DPP‐2F after annealing at different temperatures.     

Synthesis and characterization of novel low‐bandgap triphenylamine‐based conjugated polymers with main‐chain donors and pendent acceptors for organic photovoltaics

A series of novel low‐bandgap triphenylamine‐based conjugated polymers ( PCAZCN , PPTZCN , and PDTPCN ) consisting of different electron‐rich donor main chains (N‐alkyl‐2,7‐carbazole, phenothiazine, and cyclopentadithinopyrol, respectively) as well as cyano‐ and dicyano‐vinyl electron‐acceptor pendants were synthesized and developed for polymer solar cell applications. The polymers covered broad absorption spectra of 400–800 nm with narrow optical bandgaps ranging 1.66–1.72 eV. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of the polymers measured by cyclic voltammetry were found in the range of ?5.12 to ?5.32 V and ?3.45 to ?3.55 eV, respectively. Under 100 mW/cm² of AM 1.5 white‐light illumination, bulk heterojunction photovoltaic devices composing of an active layer of electron‐donor polymers ( PCAZCN , PPTZCN , and PDTPCN ) blended with electron‐acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester or [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) in different weight ratios were investigated. The photovoltaic device containing donor PCAZCN and acceptor PC₇₁BM in 1:2 weight ratio showed the highest power conversion efficiency of 1.28%, with V_oc = 0.81 V, J_sc = 4.93 mA/cm², and fill factor = 32.1%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Spectroscopic and Electrochemical Evaluation of Salt Effects on Electron‐Transfer Equilibria between Donor/Acceptor and Ion‐Radical Pairs in Organic Solvents

Addition of “inert” tetrabutylammonium hexafluorophosphate (Bu₄NPF₆) to a solution of TMDO/DDQ in dichloromethane (where TMDO= 2,2,6,6‐tetramethylbenzo[1,2‐d;4,5‐d]bis[1,3]‐dioxole, donor, and DDQ= diclorodicyano‐p‐benzoquinone, acceptor) is accompanied by drastic changes in the electronic spectrum, which are related to the appearance of the DDQ ^{? .} and TMDO ^+. ion radicals and a decrease in the concentration of the neutral molecules and the charge‐transfer complex [ TMDO,DDQ ]. These changes point to a considerable rise (of about three orders of magnitude) in the apparent electron‐transfer equilibrium constant (K_ET) for this donor/acceptor pair upon increasing the electrolyte concentration from 0 to 0.5 M . Accordingly, the ion‐radical fractions and K_ET values are higher in dichloromethane, at high electrolyte concentrations, than in acetonitrile (where the effect of Bu₄NPF₆ is less pronounced). Similar trends of the apparent equilibrium constants are observed for the tetramethyl‐p‐phenylenediamine/tetracyanoethylene pair. Electron‐transfer equilibrium constants for both donor/acceptor dyads obtained from spectral measurements are related to those derived from the redox potentials of the reactants. The effects of media variations on the electron‐transfer equilibria are discussed within the ion‐pairing and ionic‐activity frameworks.     

Tetrathiafulvalene‐Based Mixed‐Valence Acceptor–Donor–Acceptor Triads: A Joint Theoretical and Experimental Approach

This work presents a joint theoretical and experimental characterisation of the structural and electronic properties of two tetrathiafulvalene (TTF)‐based acceptor–donor–acceptor triads (BQ–TTF–BQ and BTCNQ–TTF—BTCNQ; BQ is naphthoquinone and BTCNQ is benzotetracyano‐p‐quinodimethane) in their neutral and reduced states. The study is performed with the use of electrochemical, electron paramagnetic resonance (EPR), and UV/Vis/NIR spectroelectrochemical techniques guided by quantum‐chemical calculations. Emphasis is placed on the mixed‐valence properties of both triads in their radical anion states. The electrochemical and EPR results reveal that both BQ–TTF–BQ and BTCNQ–TTF–BTCNQ triads in their radical anion states behave as class‐II mixed‐valence compounds with significant electronic communication between the acceptor moieties. Density functional theory calculations (BLYP35/cc‐pVTZ), taking into account the solvent effects, predict charge‐localised species (BQ ^{. ?}–TTF–BQ and BTCNQ ^{. ?}–TTF–BTCNQ) as the most stable structures for the radical anion states of both triads. A stronger localisation is found both experimentally and theoretically for the BTCNQ–TTF–BTCNQ anion, in accordance with the more electron‐withdrawing character of the BTCNQ acceptor. CASSCF/CASPT2 calculations suggest that the low‐energy, broad absorption bands observed experimentally for the BQ–TTF–BQ and BTCNQ–TTF–BTCNQ radical anions are associated with the intervalence charge transfer (IV‐CT) electronic transition and two nearby donor‐to‐acceptor CT excitations. The study highlights the molecular efficiency of the electron‐donor TTF unit as a molecular wire connecting two acceptor redox centres.     

Photocatalytic Hydrogen Evolution Based on Efficient Energy and Electron Transfers in Donor–Bridge–Acceptor Multibranched‐Porphyrin‐Functionalized Platinum Nanocomposites

Two donor–bridge–acceptor conjugates (5,10,15,20‐tetrakis[4‐(N,N‐diphenylaminobenzoate)phenyl] porphyrin (TPPZ) and 5,10,15,20‐tetrakis[4‐(N,N‐diphenylaminostyryl)phenyl] porphyrin (TPPX)) were covalently linked to triphenylamine (TPA) at the meso‐position of porphyrin ring. The triphenylamine entities were expected to act as energy donors and the porphyrins to act as an energy acceptor. In this paper, we report on the synthesis of these multibranched‐porphyrin‐functionalized Pt nanocomposites. The conjugates used here not only served as a stabilizer to prevent agglomeration of Pt nanoparticles, but also as a light‐harvesting photosensitizer. The occurrence of photoinduced electron‐transfer processes was confirmed by time‐resolved fluorescence and photoelectrochemical spectral measurements. The different efficiencies for energy and electron transfer in the two multibranched porphyrins and the functionalized Pt nanocomposites were attributed to diverse covalent linkages. Moreover, in the reduction of water to produce H₂, the photocatalytic activity of the Pt nanocomposite functionalized by TPPX, in which the triphenylamine and porphyrin moieties are bonded through an ethylene bridge, was much higher than that of the platinum nanocomposite functionalized by TPPZ, in which the two moieties are bonded through an ester. This investigation demonstrates the fundamental advantages of constructing donor–bridge–acceptor conjugates as highly efficient photosensitizers based on efficient energy and electron transfer.     

Dynamics of Photoinduced Electron‐Transfer Processes in Fullerene‐Based Dyads: Effects of Varying the Donor Strength

Two classes of fullerene‐based donor–bridge–acceptor (D–B–A) systems containing donors of varying oxidation potentials have been synthesized. These systems include fullerenes linked to heteroaromatic donor groups (phenothiazine/phenoxazine) as well as substituted anilines (p‐anisidine/p‐toluidine). In contrast to the model compound, an efficient intramolecular electron transfer is observed from the fullerene singlet excited state in polar solvents. An increase in the rate constant and quantum yield of charge separation (k_cs and Φ_cs) has been observed for both classes of dyads, with decrease in the oxidation potentials of the donor groups. This observation indicates that the rates of the forward electron transfer fall in the normal region of the Marcus curve. The long‐lived charge separation enabled the characterization of electron transfer products, namely, the radical cation of the donor and radical anion of the pyrrolidinofullerene, by using nanosecond transient absorption spectroscopy. The small reorganization energy (λ) of C₆₀ coupled with large negative free energy changes (‐ΔG°) for the back electron transfer places the back electron process in the inverted region of Marcus curve, thereby stabilizing the electron transfer products.     

“Two‐Point” Self‐Assembly and Photoinduced Electron Transfer in meso‐Donor‐Carrying Bis(styryl crown ether)‐BODIPY–Bis(alkylammonium)fullerene Donor–Acceptor Conjugates

BF₂‐chelated dipyrromethene, BODIPY, was functionalized to carry two styryl crown ether tails and a secondary electron donor at the meso position. By using a “two‐point” self‐assembly strategy, a bis‐alkylammonium‐functionalized fullerene (C₆₀) was allowed to self‐assemble the crown ether voids of BODIPY to obtain multimodular donor–acceptor conjugates. As a consequence of the two‐point binding, the 1:1 stoichiometric complexes formed yielded complexes of higher stability in which fluorescence of BODIPY was found to be quenched; this suggested the occurrence of excited‐state processes. The geometry and electronic structure of the self‐assembled complexes were derived from B3LYP/3‐21G(*) methods in which no steric constraints between the entities was observed. An energy‐level diagram was established by using spectral, electrochemical, and computational results to help understand the mechanistic details of excited‐state processes originating from ¹bis‐styryl‐BODIPY*. Femtosecond transient absorbance studies were indicative of the formation of an exciplex state prior to the charge‐separation process to yield a bis‐styryl‐BODIPY ^{. +}–C₆₀ ^{. −} radical ion pair. The time constants for charge separation were generally lower than charge‐recombination processes. The present studies bring out the importance of multimode binding strategies to obtain stable self‐assembled donor–acceptor conjugates capable of undergoing photoinduced charge separation needed in artificial photosynthetic applications.     

Vectorial Electron Transfer in Donor–Photosensitizer–Acceptor Triads Based on Novel Bis‐tridentate Ruthenium Polypyridyl Complexes

The first examples of rodlike donor–photosensitizer–acceptor arrays based on bis‐2,6‐di(quinolin‐8‐yl)pyridine Ru^II complexes 1 a and 3 a for photoinduced electron transfer have been synthesized and investigated. The complexes are synthesized in a convergent manner and are isolated as linear, single isomers. Time‐resolved absorption spectroscopy reveals long‐lived, photoinduced charge‐separated states (τ_CSS ( 1 a )=140 ns, τ_CSS ( 3 a )=200 ns) formed by stepwise electron transfer. The overall yields of charge separation (≥50 % for complex 1 a and ≥95 % for complex 3 a ) are unprecedented for bis‐tridentate Ru^II polypyridyl complexes. This is attributed to the long‐lived excited state of the [Ru(dqp)₂]²⁺ complex combined with fast electron transfer from the donor moiety following the initial charge separation. The rodlike arrangement of donor and acceptor gives controlled, vectorial electron transfer, free from the complications of stereoisomeric diversity. Thus, such arrays provide an excellent system for the study of photoinduced electron transfer and, ultimately, the harvesting of solar energy.     

Metal‐Free Sensitizers for Dye‐Sensitized Solar Cells

This review focuses on our work on metal‐free sensitizers for dye‐sensitized solar cells (DSSCs). Sensitizers based on D?A′?π?A architecture (D is a donor, A is an acceptor, A′ is an electron‐deficient entity) exhibit better light harvesting than D?π?A‐type sensitizers. However, appropriate molecular design is needed to avoid excessive aggregation of negative charge at the electron‐deficient entity upon photoexcitation. Rigidified aromatics, including aromatic segments comprising fused electron‐excessive and ‐deficient units in the spacer, allow effective electronic communication, and good photoinduced charge transfer leads to excellent cell performance. Sensitizers with two anchors/acceptors, D(–π–A)₂, can more efficiently harvest light, inject electrons, and suppress dark current compared with congeners with a single anchor. Appropriate incorporation of heteroaromatic units in the spacer is beneficial to DSSC performance. High‐performance, aqueous‐based DSSCs can be achieved with a dual redox couple comprising imidazolium iodide and 2,2,6,6‐tetramethylpiperidin‐N‐oxyl, and/or using dyes of improved wettability through the incorporation of a triethylene oxide methyl ether chain.