首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Nonmetallic carbon‐based nanomaterials (CNMs) are important in various potential applications, especially after the emergence of graphene and carbon nanotubes, which demonstrate outstanding properties arising from their unique nanostructures. The pristine graphitic structure of CNMs consists of sp2 hybrid C?C bonds and is considered to be neutral in nature with low wettability and poor reactivity. To improve its compatibility with other materials and, hence, for greater applicability, CNMs are generally required to be functionalized effectively and/or doped with heteroatoms in their graphitic frameworks for feasible interfacial interactions. Among the various possible functional/doping elements, nitrogen (N) atoms have received much attention given their potential to fine tune the intrinsic properties, such as the work‐function, charge carrier concentration, surface energy, and polarization, of CNMs. N‐doping improves the surface energy and reactivity with enhanced charge polarization and minimal damage to carbon frameworks. The modified surface energy and chemical activity of N‐doped carbon nanomaterials (NCNMs) can be useful for a broad range of applications, including fuel cells, solar cells, Li‐ion batteries, supercapacitors, chemical catalysts, catalyst supports, and so forth.  相似文献   

2.
To gain insight into the underlying mechanisms of catalyst durability for the selective catalytic reduction (SCR) of NOx with an ammonia reductant, we employed scanning transmission X‐ray microscopy (STXM) to study Cu‐exchanged zeolites with the CHA and MFI framework structures before and after simulated 135 000‐mile aging. X‐ray absorption near‐edge structure (XANES) measurements were performed at the Al K‐ and Cu L‐edges. The local environment of framework Al, the oxidation state of Cu, and geometric changes were analyzed, showing a multi‐factor‐induced catalytic deactivation. In Cu‐exchanged MFI, a transformation of CuII to CuI and CuxOy was observed. We also found a spatial correlation between extra‐framework Al and deactivated Cu species near the surface of the zeolite as well as a weak positive correlation between the amount of CuI and tri‐coordinated Al. By inspecting both Al and Cu in fresh and aged Cu‐exchanged zeolites, we conclude that the importance of the preservation of isolated CuII sites trumps that of Brønsted acid sites for NH3‐SCR activity.  相似文献   

3.
We have developed a CuII‐, AgI‐, and NaOTf‐mediated intramolecular quaternization by arylation reactions to synthesize a variety of N‐heterocyclic carbene (NHC) precursors with a benzene‐fused backbone. The methodology also provides a convenient alternative route for the synthesis of 6‐H‐phenanthridine derivatives. A novel silver–NHC complex was prepared by treatment of Ag2O with the free carbene, which was in situ prepared from the deprotonation of a representative quinazolinonium salt.  相似文献   

4.
The behavior of N‐heterocyclic carbene (NHC) ligands in organometallic chemistry is hugely important for catalysis, due to the effect of these ligands on catalytic pathways and their involvement in catalyst decomposition. In this report, a combined experimental and computational study is presented, which provides mechanistic understanding of the unprecedented oxidative coupling of NHCs at Cu. The presence of CuI–, CuII–, and CuIII–NHC complexes during the process is postulated, with the unusual Ccarbene–Ccarbene oxidative coupling reaction occurring under extremely mild reaction conditions. This process may represent a novel pathway for the decomposition of Cu–NHC complexes.  相似文献   

5.
A sensitive amine‐responsive disassembly of self‐assembled AuI‐CuI double salts was observed and its utilization for the synergistic catalysis was enlightened. Investigation of the disassembly of [Au(NHC)2][CuI2] revealed the contribution of Cu‐assisted ligand exchange of N‐heterocyclic carbene (NHC) by amine in [Au(NHC)2]+ and the capacity of [CuI2]? on the oxidative step. By integrating the implicative information coded in the responsive behavior and inherent catalytic functions of d10 metal complexes, a catalyst for the oxidative carbonylation of amines was developed. The advantages of this method were clearly reflected on mild reaction conditions and the significantly expanded scope (51 examples); both primary and steric secondary amines can be employed as substrates. The cooperative reactivity from Au and Cu centers, as an indispensable prerequisite for the excellent catalytic performance, was validated in the synthesis of (un)symmetric ureas and carbamates.  相似文献   

6.
A Cu‐based methanol synthesis catalyst was obtained from a phase pure Cu,Zn,Al hydrotalcite‐like precursor, which was prepared by co‐precipitation. This sample was intrinsically more active than a conventionally prepared Cu/ZnO/Al2O3 catalyst. Upon thermal decomposition in air, the [(Cu0.5Zn0.17Al0.33)(OH)2(CO3)0.17] ? mH2O precursor is transferred into a carbonate‐modified, amorphous mixed oxide. The calcined catalyst can be described as well‐dispersed “CuO” within ZnAl2O4 still containing stabilizing carbonate with a strong interaction of Cu2+ ions with the Zn–Al matrix. The reduction of this material was carefully analyzed by complementary temperature‐programmed reduction (TPR) and near‐edge X‐ray absorption fine structure (NEXAFS) measurements. The results fully describe the reduction mechanism with a kinetic model that can be used to predict the oxidation state of Cu at given reduction conditions. The reaction proceeds in two steps through a kinetically stabilized CuI intermediate. With reduction, a nanostructured catalyst evolves with metallic Cu particles dispersed in a ZnAl2O4 spinel‐like matrix. Due to the strong interaction of Cu and the oxide matrix, the small Cu particles (7 nm) of this catalyst are partially embedded leading to lower absolute activity in comparison with a catalyst comprised of less‐embedded particles. Interestingly, the exposed Cu surface area exhibits a superior intrinsic activity, which is related to a positive effect of the interface contact of Cu and its surroundings.  相似文献   

7.
Redox‐unstable cuprous hydridotriphenylborate was isolated as an N‐heterocyclic carbene adduct [(IPr)Cu(HBPh3)] (IPr=1,3‐bis(2,6‐diisopropylphenyl)imidazol‐2‐ylidene) with good thermal stability. Although this compound displays a contact ion‐pair structure, CuIH‐like catalytic activity was envisaged in carbonyl hydrosilylation. Sufficient moisture stability allowed the catalysis in aqueous/organic media. Mechanistic study further showed that a phenyl group on the borate anion is abstracted by [(IPr)Cu]+ to give the cationic organocopper complex [(IPr)2Cu2(μ‐Ph)][BPh4].  相似文献   

8.
An easily prepared supported copper hydroxide on titanium oxide (Cu(OH)x/TiO2) showed high catalytic performance for the 1,3‐dipolar cycloaddition of organic azides to terminal alkynes in non‐polar solvents under anaerobic conditions. The reactions of various combinations of organic azides (four examples, including aromatic and aliphatic ones) and terminal alkynes (eleven examples, including aromatic, aliphatic, and double bond‐containing ones) exclusively proceeded to give the corresponding 1,4‐disubstituted‐1,2,3‐triazole derivatives in a completely regioselective manner. For the transformation of benzyl azide and ethynylbenzene with 0.12 mol % of Cu(OH)x/TiO2, the turnover frequency was 505 h?1 and the turnover number reached up to 800. These values were the highest among those with previously reported heterogeneous catalysts including Cu(OH)x/Al2O3. The observed catalysis was truly heterogeneous and the retrieved catalyst after the reaction could be reused at least three times with retention of its high catalytic performance. It was confirmed by the UV/Vis spectrum of Cu(OH)x/TiO2 and the amount of diyne formed that the CuII species in Cu(OH)x/TiO2 were reduced to CuI species by the alkyne–alkyne homocoupling at the initial stage of the reaction (during the pretreatment of Cu(OH)x/TiO2 with an alkyne). The catalytic reaction rate for the 1,3‐dipolar cycloaddition linearly increased with an increase in the amount of in situ generated CuI species. Therefore, the in situ generated CuI species would be the catalytically active species for the present 1,3‐dipolar cycloaddition.  相似文献   

9.
The anionic diamido N-heterocyclic carbene 1 is used to prepare a series of linear as well as trigonal, heteroleptic CuI complexes with small molecular ligands such as pyridine derivatives or triphenylphosphine. A key role lies in the versatile precursor for these complexes, a moisture- and air-stable 1D coordination polymer [1 ⋅ Cu] n composed of only the NHC ligand and CuI, such that the copper is linearly coordinated by the carbene carbon atom and one oxygen atom of the backbone of the carbene. This polymer can easily be cleaved into monomeric complexes by addition of the desired ligand to dispersions of the polymer in dichloromethane. In solution, the complexes are in equilibrium with this highly insoluble polymer and free ligand. Thus, analytical and spectroscopical experiments with the compounds are limited to their crystalline state, characterized by single crystal X-ray diffraction experiments. Some of the complexes exhibit visible luminescence in the solid state upon irradiation with ultraviolet light. The spectral features (emission wavelength, Stokes shift, width of the emission band, vibrational fine structure) significantly differ among the complexes. Quantum mechanical computations reveal a subtle interplay of several factors such as coordination number and charge transfer character of the emissive state.  相似文献   

10.
A series of Cu‐pyrrolidone/spherical activated carbon (SAC) catalysts were prepared via a simple incipient wetness impregnation method and then assessed in acetylene hydrochlorination, and the catalytic evaluation result indicated that the 1‐methyl‐2‐pyrrolidinone (NMP) ligand was found to be the most effective one to significantly improve the activity and stability of Cu catalyst. The catalyst with the optimal molar ratio of NMP/Cu = 0.25 showed 94.2% acetylene conversion at 180°C and an acetylene gas hourly space velocity of 180 h?1. Moreover, the acetylene conversion of Cu‐0.25NMP/SAC remained stable over 99.1% for about 220 h under the industrial condition. Transmission electron microscopy (TEM) analyses proved that NMP ligand improved the dispersion of Cu species. In addition, hydrogen temperature‐programmed reduction (H2‐TPR), X‐ray photoelectron spectra (XPS), thermogravimetric analysis (TGA), and Brunner–Emmet–Teller (BET) indicated that the additive of NMP was preferential to stabilize the catalytic active Cu+ and Cu2+ species and inhibit the reduction of Cuα+ to Cu0 during the preparation process and reaction, hence restraining the coke deposition. Furthermore, the steady coordination structure between Cu and NMP was confirmed by Fourier‐transform infrared spectra (FT‐IR) and Raman combining with density functional theory (DFT) calculation, which could effectively lower the adsorption energy of catalyst for C2H2 and inhibit the serious carbon deposition caused by excessive acetylene self‐accumulation. Our findings suggest that the efficient, well‐stabilized cost‐effective, and environmentally friendly Cu catalyst has great potential in acetylene hydrochlorination.  相似文献   

11.
The organic oxidant TEMPO (2,2,4,4‐tetramethylpiperdine‐1‐oxyl) was immobilized on iron oxide (Fe3O4) superparamagnetic nanoparticles by employing strong metal‐oxide chelating phosphonates and azide/alkyne “click” chemistry. This simple preparation yields recyclable TEMPO‐coated nanoparticles with good TEMPO loadings. They have excellent magnetic response and efficiently catalyze the oxidation of a wide range of primary and secondary alcohols to aldehydes, ketones, and lactones under either aerobic acidic MnII/CuII oxidizing Minisci conditions, or basic NaOCl Anelli conditions. The nanoparticles could be recycled more than 20 times under the Minisci conditions and up to eight times under the Anelli conditions with good to excellent substrate conversions and product selectivities. Immobilization of the catalyst through a phosphonate linkage allows the particles to withstand acidic oxidizing environments with minimal catalyst leaching. Clicking TEMPO to the phosphonate prior to phosphonate immobilization, rather than after, ensures the clicked catalyst is the only species on the particle surface. This facilitates quantification of the catalyst loading. The stability of the phosphonate linker and simplicity of this catalyst immobilization method make this an attractive approach for tethering catalysts to oxide supports, creating magnetically separable catalysts that can be used under neutral or acidic conditions.  相似文献   

12.
A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of AuI by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of CuI with alternate AuI/bis(imidazolate) bridging scaffolds and strong unsupported CuI–CuI interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu2O trapped by peripheral AuI/bis(imidazolate) moieties.  相似文献   

13.
A new protocol for the synthesis of protic bis(N‐heterocyclic carbene) complexes of AuI by a stepwise metal‐controlled coupling of isocyanide and propargylamine is described. They are used as tectons for the construction of supramolecular architectures through metalation and self‐assembly. Notably a unique polymeric chain of CuI with alternate AuI/bis(imidazolate) bridging scaffolds and strong unsupported CuI–CuI interactions has been generated, as well as a 28‐metal‐atoms cluster containing a nanopiece of Cu2O trapped by peripheral AuI/bis(imidazolate) moieties.  相似文献   

14.
In this work, an “on–off–on” switch system has been successfully applied through the construction of an electrochemiluminscent biosensor for copper ion (Cu2+) detection based on a new electrochemiluminescence (ECL) emitter of supramolecular nanorods, which was achieved through supramolecular interactions between 3,4,9,10‐perylenetetracarboxylic acid (PTCA) and aniline. The initial “signal‐on” state with strong and stable ECL emission was obtained by use of the supramolecular nanorods with a new signal amplification strategy involving a co‐reaction accelerator. In addition, ECL quencher probes (Fc‐NH2/Cu‐Sub/nano‐Au) were fabricated by immobilizing aminoferrocene (Fc‐NH2) on Cu‐substrate strand modified Au nanoparticles. The quencher probes were hybridized with the immobilized Cu‐enzyme strand to form Cu2+‐specific DNAzyme. Similarly, the “signal‐off” state was obtained by the high quenching effect of Fc‐NH2 on the ECL of the excited‐state PTCA (1PTCA*). As expected, the second “switch‐on” state could achieved by incubating with the target Cu2+, owing to the Cu2+‐specific DNAzyme, which was irreversibly cleaved, resulting in the release of the quencher probes from the sensor interface. Herein, on the basis of the ECL intensity changes (ΔIECL) before and after incubating with the target Cu2+, the prepared Cu2+‐specific DNAzyme‐based biosensor was used for the determination of Cu2+ concentrations with high sensitivity, excellent selectivity, and good regeneration.  相似文献   

15.
The engineering of novel catalytic nanomaterials that are highly active for crucial carbon–carbon bond formations, easily recoverable many times, and biocompatible is highly desirable in terms of sustainable and green chemistry. To this end, catalysts comprising dendritic “click” ligands that are immobilized on a magnetic nanoparticle (MNP) core, terminated by triethylene glycol (TEG) groups, and incorporate Pd nanoparticles (PdNPs) have been prepared. These nanomaterials are characterized by transmission electron microscopy (TEM), high‐resolution TEM, inductively coupled plasma analysis, Fourier transform infrared spectroscopy, X‐ray photoelectron spectra and energy‐dispersive X‐ray spectroscopy. They are shown to be highly active, dispersible, and magnetically recoverable many times in Suzuki, Sonogashira, and Heck reactions. In addition, a series of pharmacologically relevant or natural products were successfully synthesized using these magnetic PdNPs as catalyst. For comparison, related PdNP catalysts deposited on MNPs bearing linear “click” PEGylated ligands are also prepared. Strong positive dendritic effects concerning ligand loading, catalyst loading, catalytic activity, and recyclability are observed, that is, the dendritic catalysts are much more efficient than non‐dendritic analogues.  相似文献   

16.
The synthesis and full characterization of new air-stable AgI and CuI complexes bearing structurally bulky expanded-ring N-heterocyclic carbene (erNHC) ligands is presented. The condensation of protonated NHC salts with Ag2O afforded a collection of AgI complexes, and their first use as ligand transfer reagents led to novel isostructural CuI or AuI complexes. In situ deprotonation of the NHC salts in the presence of a copper(I) source, provides a library of new CuI complexes. The solid-state structures feature large N-CNHC-N angles (118–128°) and almost identical angles between the aryl groups on the nitrogen atoms and the plane of the N-C-N unit of the carbene (i.e. torsion angles close to 0°). Among the steric parameters, the percent buried volume (%Vbur) values span easily in the 50–57 % range, and that one of (9-Dipp)CuBr complex (%Vbur=57.5) overcomes to other known erNHC–metal complexes reported to date. Preliminary catalytic experiments in the copper-catalyzed coupling between N-tosylhydrazone and phenylacetylene, afforded 76–93 % product at the 0.5–2.5 mol % catalyst loading, proving the stability of CuI erNHC complexes at elevated temperatures (100 °C).  相似文献   

17.
Herein, we report a Cu‐catalyzed enantioselective allylic alkylation using a γ‐butyrolactone‐derived silyl ketene acetal. Critical to the development of this work was the identification of a novel mono‐picolinamide ligand with the appropriate steric and electronic properties to afford the desired products in high yield (up to 96 %) and high ee (up to 95 %). Aryl, aliphatic, and unsubstituted allylic chlorides bearing a broad range of functionality are well‐tolerated. Spectroscopic studies reveal that a CuI species is likely the active catalyst, and DFT calculations suggest ligand sterics play an important role in determining Cu coordination and thus catalyst geometry.  相似文献   

18.
A RhI‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp) C(sp3) and C(sp3) C(sp3) bonds are built successively on the carbenic carbon atom. The RhI‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.  相似文献   

19.
The title complex, [Cu(C6H4N3)]n, was synthesized by the reaction of cupric nitrate, 1H‐benzotriazole (BTAH) and aqueous ammonia under hydrothermal conditions. The asymmetric unit contains three crystallographically independent CuI cations and two 1H‐benzotriazolate ligands. Two of the CuI cations, one with a linear two‐coordinated geometry and one with a four‐coordinated tetrahedral geometry, are located on sites with crystallographically imposed twofold symmetry. The third CuI cation, with a planar three‐coordinated geometry, is on a general position. Two CuI cations are doubly bridged by two BTA ligands to afford a noncentrosymmetric planar [Cu2(BTA)2] subunit, and two [Cu2(BTA)2] subunits are arranged in an antiparallel manner to form a centrosymmetric [Cu2(BTA)2]2 secondary building unit (SBU). The SBUs are connected in a crosswise manner via the sharing of four‐coordinated CuI cations, Cu—N bonding and bridging by two‐coordinate CuI cations, resulting in a one‐dimensional chain along the c axis. These one‐dimensional chains are further linked by C—H...π and weak van der Waals interactions to form a three‐dimensional supramolecular architecture.  相似文献   

20.
A RhI‐catalyzed three‐component reaction of tert‐propargyl alcohol, diazoester, and alkyl halide has been developed. This reaction can be considered as a carbene‐involving sequential alkyl and alkynyl coupling, in which C(sp)? C(sp3) and C(sp3)? C(sp3) bonds are built successively on the carbenic carbon atom. The RhI‐carbene migratory insertion of an alkynyl moiety and subsequent alkylation are proposed to account for the two separate C? C bond formations. This reaction provides an efficient and tunable method for the construction of all‐carbon quaternary center.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号