Constructing Ordered Three‐Dimensional TiO2 Channels for Enhanced Visible‐Light Photocatalytic Performance in CO2 Conversion Induced by Au Nanoparticles

As a typical photocatalyst for CO₂ reduction, practical applications of TiO₂ still suffer from low photocatalytic efficiency and limited visible‐light absorption. Herein, a novel Au‐nanoparticle (NP)‐decorated ordered mesoporous TiO₂ (OMT) composite (OMT‐Au) was successfully fabricated, in which Au NPs were uniformly dispersed on the OMT. Due to the surface plasmon resonance (SPR) effect derived from the excited Au NPs, the TiO₂ shows high photocatalytic performance for CO₂ reduction under visible light. The ordered mesoporous TiO₂ exhibits superior material and structure, with a high surface area that offers more catalytically active sites. More importantly, the three‐dimensional transport channels ensure the smooth flow of gas molecules, highly efficient CO₂ adsorption, and the fast and steady transmission of hot electrons excited from the Au NPs, which lead to a further improvement in the photocatalytic performance. These results highlight the possibility of improving the photocatalysis for CO₂ reduction under visible light by constructing OMT‐based Au‐SPR‐induced photocatalysts.     

Dispersed Nickel Cobalt Oxyphosphide Nanoparticles Confined in Multichannel Hollow Carbon Fibers for Photocatalytic CO2 Reduction

Materials for high‐efficiency photocatalytic CO₂ reduction are desirable for solar‐to‐carbon fuel conversion. Herein, highly dispersed nickel cobalt oxyphosphide nanoparticles (NiCoOP NPs) were confined in multichannel hollow carbon fibers (MHCFs) to construct the NiCoOP‐NPs@MHCFs catalysts for efficient CO₂ photoreduction. The synthesis involves electrospinning, phosphidation, and carbonization steps and permits facile tuning of chemical composition. In the catalyst, the mixed metal oxyphosphide NPs with ultrasmall size and high dispersion offer abundant catalytically active sites for redox reactions. At the same time, the multichannel hollow carbon matrix with high conductivity and open ends will effectively promote mass/charge transfer, improve CO₂ adsorption, and prevent the metal oxyphosphide NPs from aggregation. The optimized hetero‐metal oxyphosphide catalyst exhibits considerable activity for photosensitized CO₂ reduction, affording a high CO evolution rate of 16.6 μmol h^?1 (per 0.1 mg of catalyst).     

Electrocatalytic and Solar‐Driven CO2 Reduction to CO with a Molecular Manganese Catalyst Immobilized on Mesoporous TiO2

Electrocatalytic CO₂ reduction to CO was achieved with a novel Mn complex, fac‐[MnBr(4,4′‐bis(phosphonic acid)‐2,2′‐bipyridine)(CO)₃] ( MnP ), immobilized on a mesoporous TiO₂ electrode. A benchmark turnover number of 112±17 was attained with these TiO₂| MnP electrodes after 2 h electrolysis. Post‐catalysis IR spectroscopy demonstrated that the molecular structure of the MnP catalyst was retained. UV/vis spectroscopy confirmed that an active Mn–Mn dimer was formed during catalysis on the TiO₂ electrode, showing the dynamic formation of a catalytically active dimer on an electrode surface. Finally, we combined the light‐protected TiO₂| MnP cathode with a CdS‐sensitized photoanode to enable solar‐light‐driven CO₂ reduction with the light‐sensitive MnP catalyst.     

Isolated Square‐Planar Copper Center in Boron Imidazolate Nanocages for Photocatalytic Reduction of CO2 to CO

Photocatalytic reduction of CO₂ to value‐added fuel has been considered to be a promising strategy to reduce global warming and shortage of energy. Rational design and synthesis of catalysts to maximumly expose the active sites is the key to activate CO₂ molecules and determine the reaction selectivity. Herein, we synthesize a well‐defined copper‐based boron imidazolate cage (BIF‐29) with six exposed mononuclear copper centers for the photocatalytic reduction of CO₂. Theoretical calculations show a single Cu site including weak coordinated water delivers a new state in the conduction band near the Fermi level and stabilizes the *COOH intermediate. Steady‐state and time‐resolved fluorescence spectra show these Cu sites promote the separation of electron–hole pairs and electron transfer. As a result, the cage achieves solar‐driven reduction of CO₂ to CO with an evolution rate of 3334 μmol g^?1 h^?1 and a high selectivity of 82.6 %.     

Photochemical Reduction of Low Concentrations of CO2 in a Porous Coordination Polymer with a Ruthenium(II)–CO Complex

Direct use of low pressures of CO₂ as a C1 source without concentration from gas mixtures is of great interest from an energy‐saving viewpoint. Porous heterogeneous catalysts containing both adsorption and catalytically active sites are promising candidates for such applications. Here, we report a porous coordination polymer (PCP)‐based catalyst, PCP‐Ru^II composite, bearing a Ru^II‐CO complex active for CO₂ reduction. The PCP‐Ru^II composite showed improved CO₂ adsorption behavior at ambient temperature. In the photochemical reduction of CO₂ the PCP‐Ru^II composite produced CO, HCOOH, and H₂. Catalytic activity was comparable with the corresponding homogeneous Ru^II catalyst and ranks among the highest of known PCP‐based catalysts. Furthermore, catalytic activity was maintained even under a 5 % CO₂/Ar gas mixture, revealing a synergistic effect between the adsorption and catalytically active sites within the PCP‐Ru^II composite.     

Facilely anchoring Cu2O nanoparticles on mesoporous TiO2 nanorods for enhanced photocatalytic CO2 reduction through efficient charge transfer

Semiconductor-employed photocatalytic CO₂ reduction has been regarded as a promising approach for environmental-friendly conversion of CO₂ into solar fuels. Herein, TiO₂/Cu₂O composite nanorods have been successfully fabricated by a facile chemical reduction method and applied for photocatalytic CO₂ reduction. The composition and structure characterization indicates that the Cu₂O nanoparticles are coupled with TiO₂ nanorods with an intimate contact. Under light illumination, all the TiO₂/Cu₂O composite nanorods enhance the photocatalytic CO₂ reduction. In particular, the TiO₂/Cu₂O-15% sample exhibits the highest CH₄ yield (1.35 µmol g^-1 h^-1) within 4 h irradiation, and it is 3.07 and 15 times higher than that of pristine TiO₂ nanorods and Cu₂O nanoparticles, respectively. The enhanced photoreduction capability of the TiO₂/Cu₂O-15% is attributed to the intimate construction of Cu₂O nanoparticles on TiO₂ nanorods with formed p-n junction to accelerate the separation of photogenerated electron-hole pairs. This work provides a reference for rational design of a p-n heterojunction photocatalyst for CO₂ photoreduction.     

Improving the Photocatalytic Reduction of CO2 to CO through Immobilisation of a Molecular Re Catalyst on TiO2

The photocatalytic activity of phosphonated Re complexes, [Re(2,2′‐bipyridine‐4,4′‐bisphosphonic acid) (CO)₃(L)] (ReP; L=3‐picoline or bromide) immobilised on TiO₂ nanoparticles is reported. The heterogenised Re catalyst on the semiconductor, ReP–TiO₂ hybrid, displays an improvement in CO₂ reduction photocatalysis. A high turnover number (TON) of 48 mol_CO mol_Re^?1 is observed in DMF with the electron donor triethanolamine at λ>420 nm. ReP–TiO₂ compares favourably to previously reported homogeneous systems and is the highest TON reported to date for a CO₂‐reducing Re photocatalyst under visible light irradiation. Photocatalytic CO₂ reduction is even observed with ReP–TiO₂ at wavelengths of λ>495 nm. Infrared and X‐ray photoelectron spectroscopies confirm that an intact ReP catalyst is present on the TiO₂ surface before and during catalysis. Transient absorption spectroscopy suggests that the high activity upon heterogenisation is due to an increase in the lifetime of the immobilised anionic Re intermediate (t_{50 %}>1 s for ReP–TiO₂ compared with t_{50 %}=60 ms for ReP in solution) and immobilisation might also reduce the formation of inactive Re dimers. This study demonstrates that the activity of a homogeneous photocatalyst can be improved through immobilisation on a metal oxide surface by favourably modifying its photochemical kinetics.     

Formation of Hierarchical FeCoS2–CoS2 Double‐Shelled Nanotubes with Enhanced Performance for Photocatalytic Reduction of CO2

Hierarchical FeCoS₂–CoS₂ double‐shelled nanotubes have been rationally designed and constructed for efficient photocatalytic CO₂ reduction under visible light. The synthetic strategy, engaging the two‐step cation‐exchange reactions, precisely integrates two metal sulfides into a double‐shelled tubular heterostructure with both of the shells assembled from ultrathin two‐dimensional (2D) nanosheets. Benefiting from the distinctive structure and composition, the FeCoS₂–CoS₂ hybrid can reduce bulk‐to‐surface diffusion length of photoexcited charge carriers to facilitate their separation. Furthermore, this hybrid structure can expose abundant active sites for enhancing CO₂ adsorption and surface‐dependent redox reactions, and harvest incident solar irradiation more efficiently by light scattering in the complex interior. As a result, these hierarchical FeCoS₂–CoS₂ double‐shelled nanotubes exhibit superior activity and high stability for photosensitized deoxygenative CO₂ reduction, affording a high CO‐generating rate of 28.1 μmol h^?1 (per 0.5 mg of catalyst).     

Organic Polymer Dots Photocatalyze CO2 Reduction in Aqueous Solution

Developing low-cost and efficient photocatalysts to convert CO₂ into valuable fuels is desirable to realize a carbon-neutral society. In this work, we report that polymer dots (Pdots) of poly[(9,9′-dioctylfluorenyl-2,7-diyl)-co-(1,4-benzo-thiadiazole)] (PFBT), without adding any extra co-catalyst, can photocatalyze reduction of CO₂ into CO in aqueous solution, rendering a CO production rate of 57 μmol g⁻¹ h⁻¹ with a detectable selectivity of up to 100 %. After 5 cycles of CO₂ re-purging experiments, no distinct decline in CO amount and reaction rate was observed, indicating the promising photocatalytic stability of PFBT Pdots in the photocatalytic CO₂ reduction reaction. A mechanistic study reveals that photoexcited PFBT Pdots are reduced by sacrificial donor first, then the reduced PFBT Pdots can bind CO₂ and reduce it into CO via their intrinsic active sites. This work highlights the application of organic Pdots for CO₂ reduction in aqueous solution, which therefore provides a strategy to develop highly efficient and environmentally friendly nanoparticulate photocatalysts for CO₂ reduction.     

Efficient CO2 Capture and Photoreduction by Amine‐Functionalized TiO2

Amine‐functionalization of TiO₂ nanoparticles, through a solvothermal approach, substantially increases the affinity of CO₂ on TiO₂ surfaces through chemisorption. This chemisorption allows for more effective activation of CO₂ and charge transfer from excited TiO₂, and significantly enhances the photocatalytic rate of CO₂ reduction into methane and CO.     

Porous TiO2 Nanotubes with Spatially Separated Platinum and CoOx Cocatalysts Produced by Atomic Layer Deposition for Photocatalytic Hydrogen Production

Efficient separation of photogenerated electrons and holes, and associated surface reactions, is a crucial aspect of efficient semiconductor photocatalytic systems employed for photocatalytic hydrogen production. A new CoO_x/TiO₂/Pt photocatalyst produced by template‐assisted atomic layer deposition is reported for photocatalytic hydrogen production on Pt and CoO_x dual cocatalysts. Pt nanoclusters acting as electron collectors and active sites for the reduction reaction are deposited on the inner surface of porous TiO₂ nanotubes, while CoO_x nanoclusters acting as hole collectors and active sites for oxidation reaction are deposited on the outer surface of porous TiO₂ nanotubes. A CoO_x/TiO₂/Pt photocatalyst, comprising ultra‐low concentrations of noble Pt (0.046 wt %) and CoO_x (0.019 wt %) deposited simultaneously with one atomic layer deposition cycle, achieves remarkably high photocatalytic efficiency (275.9 μmol h⁻¹), which is nearly five times as high as that of pristine TiO₂ nanotubes (56.5 μmol h⁻¹). The highly dispersed Pt and CoO_x nanoclusters, porous structure of TiO₂ nanotubes with large specific surface area, and the synergetic effect of the spatially separated Pt and CoO_x dual cocatalysts contribute to the excellent photocatalytic activity.     

Controllable Synthesis of Few‐Layer Bismuth Subcarbonate by Electrochemical Exfoliation for Enhanced CO2 Reduction Performance

Two‐dimensional (2D) engineering of materials has been recently explored to enhance the performance of electrocatalysts by reducing their dimensionality and introducing more catalytically active ones. In this work, controllable synthesis of few‐layer bismuth subcarbonate nanosheets has been achieved via an electrochemical exfoliation method. These nanosheets catalyse CO₂ reduction to formate with high faradaic efficiency and high current density at a low overpotential owing to the 2D structure and co‐existence of bismuth subcarbonate and bismuth metal under catalytic turnover conditions. Two underlying fast electron transfer processes revealed by Fourier‐transformed alternating current voltammetry (FTacV) are attributed to CO₂ reduction at bismuth subcarbonate and bismuth metal. FTacV results also suggest that protonation of CO₂^.? is the rate determining step for bismuth catalysed CO₂ reduction.     

Metal‐Free Reduction of CO2 with Hydroboranes: Two Efficient Pathways at Play for the Reduction of CO2 to Methanol

Guanidines and amidines prove to be highly efficient metal‐free catalysts for the reduction of CO₂ to methanol with hydroboranes such as 9‐borabicyclo[3.3.1]nonane (9‐BBN) and catecholborane (catBH). Nitrogen bases, such as 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD), 7‐methyl‐1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (Me‐TBD), and 1,8‐diazabicycloundec‐7‐ene (DBU), are active catalysts for this transformation and Me‐TBD can catalyze the reduction of CO₂ to methoxyborane at room temperature with TONs and TOFs of up to 648 and 33 h^?1 (25 °C), respectively. Formate HCOOBR₂ and acetal H₂C(OBR₂)₂ derivatives have been identified as reaction intermediates in the reduction of CO₂ with R₂BH, and the first C?H‐bond formation is rate determining. Experimental and computational investigations show that TBD and Me‐TBD follow distinct mechanisms. The N?H bond of TBD is reactive toward dehydrocoupling with 9‐BBN and affords a novel frustrated Lewis pair (FLP) that can activate a CO₂ molecule and form the stable adduct 2 , which is the catalytically active species and can facilitate the hydride transfer from the boron to the carbon atoms. In contrast, Me‐TBD promotes the reduction of CO₂ through the activation of the hydroborane reagent. Detailed DFT calculations have shown that the computed energy barriers for the two mechanisms are consistent with the experimental findings and account for the reactivity of the different boron reductants.     

Unlocking the Electrocatalytic Activity of Antimony for CO2 Reduction by Two‐Dimensional Engineering of the Bulk Material

Two‐dimensional (2D) materials are known to be useful in catalysis. Engineering 3D bulk materials into the 2D form can enhance the exposure of the active edge sites, which are believed to be the origin of the high catalytic activity. Reported herein is the production of 2D “few‐layer” antimony (Sb) nanosheets by cathodic exfoliation. Application of this 2D engineering method turns Sb, an inactive material for CO₂ reduction in its bulk form, into an active 2D electrocatalyst for reduction of CO₂ to formate with high efficiency. The high activity is attributed to the exposure of a large number of catalytically active edge sites. Moreover, this cathodic exfoliation process can be coupled with the anodic exfoliation of graphite in a single‐compartment cell for in situ production of a few‐layer Sb nanosheets and graphene composite. The observed increased activity of this composite is attributed to the strong electronic interaction between graphene and Sb.     

Eosin Y‐Functionalized Conjugated Organic Polymers for Visible‐Light‐Driven CO2 Reduction with H2O to CO with High Efficiency

Visible‐light‐driven photoreduction of CO₂ to energy‐rich chemicals in the presence of H₂O without any sacrifice reagent is of significance, but challenging. Herein, Eosin Y‐functionalized porous polymers (PEosinY‐N, N=1–3), with high surface areas up to 610 m² g^?1, are reported. They exhibit high activity for the photocatalytic reduction of CO₂ to CO in the presence of gaseous H₂O, without any photosensitizer or sacrifice reagent, and under visible‐light irradiation. Especially, PEosinY‐1 derived from coupling of Eosin Y with 1,4‐diethynylbenzene shows the best performance for the CO₂ photoreduction, affording CO as the sole carbonaceous product with a production rate of 33 μmol g^?1 h^?1 and a selectivity of 92 %. This work provides new insight for designing and fabricating photocatalytically active polymers with high efficiency for solar‐energy conversion.     

Fabrication of S-scheme hollow TiO2@Bi2MoO6 composite for efficiently photocatalytic CO2 reduction

Herein, an S-scheme hollow TiO₂@Bi₂MoO₆ heterojunction was synthesized for photocatalytic reduction of CO₂ under simulated sunlight. Among all prepared composites, the TiO₂@Bi₂MoO₆ with 20% of TiO₂ exhibited the highest CO yield (183.97 μmol/g within 6 h), which was 4.0 and 2.4 times higher than pristine TiO₂ and Bi₂MoO₆, respectively. The improved photocatalytic activity may be due to the formation of S-scheme heterojunction to promote the separation and transfer of photogenerated charge carriers. Additionally, this hollow structure provided abundant sites in terms of CO₂ adsorption and activation. Meanwhile, the photogenerated charge transfer mechanism of the S-scheme was verified by work function calculations, Electron paramagnetic resonance (EPR) measurements as well as X-ray photoelectron spectroscopy (XPS). This research presents a novel approach to improve photocatalytic reduction of CO₂ via morphology modulation and the fabrication of S-scheme heterojunction.     

Photocatalytic Reduction of CO2 on TiO2 and Other Semiconductors

Rising atmospheric levels of carbon dioxide and the depletion of fossil fuel reserves raise serious concerns about the ensuing effects on the global climate and future energy supply. Utilizing the abundant solar energy to convert CO₂ into fuels such as methane or methanol could address both problems simultaneously as well as provide a convenient means of energy storage. In this Review, current approaches for the heterogeneous photocatalytic reduction of CO₂ on TiO₂ and other metal oxide, oxynitride, sulfide, and phosphide semiconductors are presented. Research in this field is focused primarily on the development of novel nanostructured photocatalytic materials and on the investigation of the mechanism of the process, from light absorption through charge separation and transport to CO₂ reduction pathways. The measures used to quantify the efficiency of the process are also discussed in detail.     

A Long‐Lived Mononuclear Cyclopentadienyl Ruthenium Complex Grafted onto Anatase TiO2 for Efficient CO2 Photoreduction

This work shows a novel artificial donor–catalyst–acceptor triad photosystem based on a mononuclear C₅H₅‐RuH complex oxo‐bridged TiO₂ hybrid for efficient CO₂ photoreduction. An impressive quantum efficiency of 0.56 % for CH₄ under visible‐light irradiation was achieved over the triad photocatalyst, in which TiO₂ and C₅H₅‐RuH serve as the electron collector and CO₂‐reduction site and the photon‐harvester and water‐oxidation site, respectively. The fast electron injection from the excited Ru²⁺ cation to TiO₂ in ca. 0.5 ps and the slow backward charge recombination in half‐life of ca. 9.8 μs result in a long‐lived D⁺–C–A^? charge‐separated state responsible for the solar‐fuel production.     

Defective TiO2 for photocatalytic CO2 conversion to fuels and chemicals

Photocatalytic conversion of CO₂ into fuels and valuable chemicals using solar energy is a promising technology to combat climate change and meet the growing energy demand. Extensive effort is going on for the development of a photocatalyst with desirable optical, surface and electronic properties. This review article discusses recent development in the field of photocatalytic CO₂ conversion using defective TiO₂. It specifically focuses on the different synthesis methodologies adapted to generate the defects and their impact on the chemical, optical and surface properties of TiO₂ and, thus, photocatalytic CO₂ conversion. It also encompasses theoretical investigations performed to understand the role of defects in adsorption and activation of CO₂ and identify the mechanistic pathway which governs the formation and selectivity of different products. It is divided into three parts: (i) general mechanism and thermodynamic criteria for defective TiO₂ catalyzed CO₂ conversion, (ii) theoretical investigation on the role of defects in the CO₂ adsorption–activation and mechanism responsible for the formation and selectivity of different products, and (iii) the effect of variation of physicochemical properties of defective TiO₂ synthesized using different methods on the photocatalytic conversion of CO₂. The review also discusses the limitations and the challenges of defective TiO₂ photocatalysts that need to be overcome for the production of sustainable fuel utilizing solar energy.

This review discusses photocatalytic CO₂ conversion using defective TiO₂, with emphasis on the mechanism, the role of defects on CO₂ adsorption–activation and product selectivity, as well as challenges of defective TiO₂ to produce solar fuels.     

Pivotal Role of Holes in Photocatalytic CO2 Reduction on TiO2

Evidence is provided that in a gas-solid photocatalytic reaction the removal of photogenerated holes from a titania (TiO₂) photocatalyst is always detrimental for photocatalytic CO₂ reduction. The coupling of the reaction to a sacrificial oxidation reaction hinders or entirely prohibits the formation of CH₄ as a reduction product. This agrees with earlier work in which the detrimental effect of oxygen-evolving cocatalysts was demonstrated. Photocatalytic alcohol oxidation or even overall water splitting proceeds in these reaction systems, but carbon-containing products from CO₂ reduction are no longer observed. H₂ addition is also detrimental, either because it scavenges holes or because it is not an efficient proton donor on TiO₂. The results are discussed in light of previously suggested reaction mechanisms for photocatalytic CO₂ reduction. The formation of CH₄ from CO₂ is likely not a linear sequence of reduction steps but includes oxidative elementary steps. Furthermore, new hypotheses on the origin of the required protons are suggested.