High-yield diastereoselective synthesis of planar chiral [2]- and [3]rotaxanes constructed from per-ethylated pillar[5]arene and pyridinium derivatives

Planar chiral [2]- and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per-ethylated pillar[5]arene (C2) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)-C2 or (pR, pR, pR, pR, pR)-C2 wheels was accomplished. Furthermore, pillar[5]arene-based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)-C2, one (pS, pS, pS, pS, pS)-C2 and one (pR, pR, pR, pR, pR)-C2 (meso form), or two (pR, pR, pR, pR, pR)-C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene-based interlocked molecules.     

Redox behavior of ferrocene-containing rotaxane: transposition of the rotaxane wheel by redox reaction of a ferrocene moiety tethered at the end of the axle

A rotaxane with a ferrocene moiety at the axle terminus was prepared. The redox potential of the ferrocene moiety decreased by ca. 80 mV when the rotaxane had a crown ether wheel capable of moving on the axle. Thus, the stabilization of the oxidized state of the ferrocene moiety is assumed to accompany the transposition of the wheel component on the axle toward the ferrocene moiety. [reaction--see text]     

The Effect of Incorporating Fréchet Dendrons into Rotaxanes and Molecular Shuttles Containing the 1,2‐Bis(pyridinium)ethane⊂[24]Crown‐8 Templating Motif

Fréchet‐type dendrons (G0–G3) were added as both axle stoppering units and cyclic wheel appendages in a series of [2]rotaxanes, [3]rotaxanes, and molecular shuttles that employ 1,2‐bis(pyridinium)ethane axles and 24‐membered crown ethers wheels. The addition of dendrimer wedges as stoppering units dramatically increased the solubility of simple [2]rotaxanes in nonpolar solvents. The X‐ray structure of a G1‐stoppered [2]rotaxane shows how the dendritic units affect the structure of the interlocked components. Increased solubility allows observation of how the interaction of dendritic units on separate components in interlocked molecules influences switching properties and molecular size. In a series of [2]rotaxane molecular shuttles incorporating two recognition sites, it was demonstrated that an increase in generation on either the stoppering unit or cyclic wheel could influence both the rate of shuttling and the site preference of the wheel on the axle.     

Synthesis of rotaxanes consisting of crown ether wheel and sec-ammonium axle under basic condition

A novel synthetic method of [2]rotaxane by end capping of pseudorotaxane via conjugate addition of thiol to N-substituted maleimide CC bond under basic condition was developed. Several [2]rotaxanes were obtained in good yields.     

Size Complementarity of Macrocyclic Cavities and Stoppers in Amide-Rotaxanes

New [2]rotaxanes were prepared by the threading and the slipping procedure, the latter having the advantage of not needing templating interactions. As a consequence, the first [2]rotaxane consisting of a tetraamide macrocycle and a pure hydrocarbon thread was synthesized (see 12a in Scheme 2). Sterically matching wheels and axles being the basic requirement of a successful slipping approach to rotaxanes, mono- and bishomologous wheels 5b , c with larger diameters than the parent 5a were synthesized and mechanically connected to amide axles 10a – c which were stoppered with blocking groups of different spatial demand (Scheme 1). The deslipping kinetics of the resulting rotaxanes 8a – c and 9a , b were measured and compared; it emerges that even slight increases in the wheel size require larger stoppers to stabilize the mechanical bond. Moreover, when the deslipping rate of 8a (amide wheel and amide axle) was determined in either DMF or THF, a strong dependence on the solvent polarity, which is caused by a differing extent of intramolecular H-bonds between the wheel and the axle, was observed. As expected, no such dependence was detected for rotaxane 12a (amide wheel and hydrocarbon axle) whose components cannot interact via H-bonds. The comparison of the sterically matching pairs of macrocycles and blocking groups, found by a systematic fitting based on the results of slipping and deslipping experiments, with other rotaxane types bearing similar stoppers allows conclusions concerning the relative cavity size of wheels of various structure.     

Synthesis of [5]rotaxanes containing bi- and tridentate coordination sites in the axis

A new example of a linear [5]rotaxane has been synthesized by using the traditional "gathering-and-threading" approach but based on an unusual axle incorporating a symmetrical bis(bidentate) chelating fragment built on a 4,7-phenanthroline core. The stoppering reaction is particularly noteworthy since, instead of using a trivial bulky stopper as precursor to the blocking group, two semistoppered copper-complexed [2]pseudorotaxanes (namely [2]semirotaxanes) are used, which leads to the desired [5]rotaxane in good yield. The efficiency of the method relies on the use of "click" chemistry, with its very mild conditions, and on the protection by a transition-metal (copper(I)) of the various coordinating groups present in the fragments to be interconnected (terpy and bidentate chelating groups), thus inhibiting potential detrimental side reactions during the copper-catalyzed stoppering reaction. Since the external fragments and the central core of the system contain tri- and bidentate chelating units, respectively, the axle of the final [5]rotaxane incorporates two types of coordinating units: two external terpy groups (terpy: 2,2':6',2'-terpyridine) and two central bidentate ligands. Such a situation enables the system to tidy two different metals centers, and to localize them in a priori well-defined positions. This is what was observed when mixing the free ligand with a mixture of Zn(2+) and Li(+) : the zinc(II) ions were unambiguously shown to occupy the external sites, whereas the Li(+) cations were found in the central part of the [5]rotaxane. An X-ray diffraction study carried out on a [3]pseudorotaxane, the axis of which is similar to the central part of the [5]rotaxane axle, demonstrates that Zn(2+) is clearly five-coordinate, the fifth ligand being a counterion, even when the coordination site of the pseudorotaxane is designed for four-coordinate metals, which is in marked contrast with copper(I) or Li(+) .     

High‐Yield Diastereoselective Synthesis of Planar Chiral [2]‐ and [3]Rotaxanes Constructed from per‐Ethylated Pillar[5]arene and Pyridinium Derivatives

Planar chiral [2]‐ and [3]rotaxanes constructed from pillar[5]arenes as wheels and pyridinium derivatives as axles were obtained in high yield using click reactions. The process of rotaxane formation was diastereoselective; the obtained [2]rotaxane was a racemic mixture consisting of (pS, pS, pS, pS, pS) and (pR, pR, pR, pR, pR) forms of the per‐ethylated pillar[5]arene ( C2 ) wheel, and other possible types of the [2]rotaxane did not form. Isolation of the enantiopure [2]rotaxanes with one axle through (pS, pS, pS, pS, pS)‐ C2 or (pR, pR, pR, pR, pR)‐ C2 wheels was accomplished. Furthermore, pillar[5]arene‐based [3]rotaxane was successfully synthesized by attachment of two pseudo [2]rotaxanes onto a bifunctional linker. [3]Rotaxane formed in a 1:2:1 mixture with one axle threaded through two (pS, pS, pS, pS, pS)‐ C2 , one (pS, pS, pS, pS, pS)‐ C2 and one (pR, pR, pR, pR, pR)‐ C2 (meso form), or two (pR, pR, pR, pR, pR)‐ C2 wheels. The [3]rotaxane enantiomers and the meso form were successfully isolated using appropriate chiral HPLC column chromatography. The procedure developed in this study is the starting point for the creation of pillar[5]arene‐based interlocked molecules.     

Insights into the Difference Between Rotaxane and Pseudorotaxane

Rotaxane and pseudorotaxane are two types of mechanically interlocked molecular architectures, and there is a clear topological difference and boundary between them. In this work, a “suggested [2]rotaxane 1 ⊂α‐CD” was constructed based on axle molecule 1 bearing two terminal ferrocene groups and a wheel component α‐cyclodextrin (α‐CD), but the result obtained indicated that the ferrocene group cannot prevent α‐CD dethreading under UV irradiation. That is, 1 ⊂α‐CD is just a pseudo[2]rotaxane. Furthermore, the two ferrocene groups in 1 ⊂α‐CD were encapsulated by two cucurbit[7]uril (CB[7]) units to obtain a heteropseudo[4]rotaxane 1 ⊂α‐CD⋅2CB[7]. This heteropseudo[4]rotaxane displayed high stability towards harsh temperatures and the isomerization of azobenzene in 1 , so it can be regarded as a [2]rotaxane. In this [2]rotaxane, the stoppers are not the bulky groups covalently bonded to the axle, but the cyclic CB[7] units connected through noncovalent interactions.     

Coordination polymers containing rotaxane linkers

A class of coordination polymers in which the linking ligands are mechanically interlocked rotaxane molecules is reviewed. To date, four different, axle - wheel templating motifs have been used to create the [2]pseudorotaxane linkers for these unique solid-state materials; (1) protonated diaminoalkane axles with cucurbit[6]uril wheels, (2) 1,2-bis(4,4'-bipyridinio)ethane axles with dibenzo[24]crown-8 wheels, (3) 2,6-naphthalene dicarboxylate axles with tetra-imidazolium macrocycle wheels and (4) a Cu(i) complex of a 1,10-phenanthroline containing dicarboxylate axle with a 1,10-phenanthroline containing crown ether wheel. The synthesis and solid state structure of each coordination polymer is described. The future directions of this area of research and some designs for the next generation of these compounds are discussed.     

A self-threaded "molecular 8"

A new type of [1]rotaxanes containing two aliphatic bridges between axle and wheel is obtained in 39% yield in a one-step synthesis starting from a [2]rotaxane which contained one sulfonamide group each in both the wheel and the axle. Temperature controlled chemoselective substitution reactions first at these sulfonamide nitrogens and then subsequently at the various other carboxamide nitrogens in the wheel and axle give rise to the formation of an isomeric mixture of three double-bridged [1]rotaxanes which could be separated by HPLC. Structure determination of the main product 3a was possible by NMR experiments supported by molecular modeling calculations. Using different reaction conditions, a double-substituted but not yet bridged [2]rotaxane 4 could be isolated as an intermediate giving further evidence for the assigned structure of 3a and the way of its formation. The shape of this double-bridged [1]rotaxane 3a reminds of a self-intertwining chiral "molecular 8", in which any possible racemization due to deslipping is hindered by the two stoppers originating from the former rotaxane axle. Hence, to the best of our knowledge this is the first example of a molecule in which both concepts, cycloenantiomerism and helical chirality, are realised in one structure. Enantiomer separation of the main product was possible by further HPLC using chiral stationary phases. The Cotton effects of the circular dichrograms are different to those of the already synthesized [1]rotaxanes bearing just one aliphatic bridge between axle and wheel.     

Molecular dynamics study of 2rotaxanes: influence of solvation and cation on co-conformation

The conformational preference of a [2]rotaxane system has been examined by molecular dynamics simulations. The rotaxane wheel consists of two bridged binding components: a cis-dibenzo-18-crown-6 ether and a 1,3-phenyldicarboxamide, and the penetrating axle consists of a central isophthaloyl unit with phenyltrityl capping groups. The influence of solvation on the co-conformation of the [2]rotaxane was evaluated by comparing the conformational flexibility in two solvents: chloroform and dimethyl sulfoxide. Attention was also paid to the effect of cation binding on the dynamical properties of the [2]rotaxane. The conformational stability of the [2]rotaxane was calculated using a MM/PB-SA strategy, and the occurrence of specific motions was examined by essential dynamics analysis. The changes in the co-conformational properties in the two solvents and upon cation binding are discussed in light of the available NMR data. The results indicate that in chloroform solution the [2]rotaxane system exists as a mixture of co-conformational states including some that have hydrogen bonds between axle C=O and wheel NH groups. Analysis of the simulations allow us to hypothesize that the [2]rotaxane's circumrotation motion can occur as the result of a dynamic process that combines a preliminary axle sliding step that breaks these hydrogen bonds and a conformational change in the ester group more distant from the wheel. In contrast, no hydrogen-bonded co-conformation was found in dimethyl sulfoxide, which appears to be due to the preferential formation of hydrogen bonds between the wheel NH groups with solvent molecules. Moreover, the axle experiences notable changes in anisotropic shielding, which would explain why the NMR signals are broadened in this solvent. Insertion of a sodium cation into the crown ether reduces co-conformational flexibility due to an interaction of the axle with the cation. Overall, the results reveal how both solvent and ionic atmosphere can influence the co-conformational preferences of rotaxanes.     

pH-Switched fluorescent pseudorotaxane assembly of cucurbit[7]uril with bispyridinium ethylene derivatives

¹H NMR spectra and fluorescence analysis revealed that the molecular shuttle and pseudorotaxane assembly of Q[7] with guest G²⁺ can be significantly switched via protonation and deprotonation of the terminal carboxylates of the guest.     

A fluorophoric-axle-based, nonfluororescent, metallo anti-[3]pseudorotaxane: recovery of fluorescence by means of an axle substitution reaction

A Cu(2+)-templated, multinuclear, nonfluorescent, anti-[3]pseudorotaxane was synthesized on a fluorophoric axle. The Cu(2+)-templated [3]pseudorotaxane was characterized by the electrospray ionization mass spectroscopy (ESI-MS), UV/Vis and EPR spectroscopy, and single-crystal X-ray data. The ESI-MS showed peaks that support the formation of [3]pseudorotaxane. The UV/Vis spectrum of [3]pseudorotaxane in CH(3)CN showed a characteristic d-d band of a Cu(2+) complex at 650 nm. Further, the X-band in the EPR spectrum of [3]pseudorotaxane suggested a distorted square-pyramidal geometry of Cu(2+). Importantly, formation of the [3]pseudorotaxane was confirmed by the single-crystal X-ray structural analysis, which showed that one fluorophoric axle was threaded into two Cu(2+) macrocyclic wheels (MC-Cu(2+)) with an anti conformation. The UV/Vis and fluorescence titration experiments were carried out to follow the solution-state formation of [3]pseudorotaxane by MC-Cu(2+) and fluorophoric axle in CH(3)CN. In both studies, the sigmoidal curve fit supported the formation of 1:2 complex of the fluorophoric axle and MC-Cu(2+) complex. Secondly, the release of the fluorophoric axle from the nonfluorescent [3]pseudorotaxane through the formation of a [2]pseudorotaxane was demonstrated by titrating a solution of the [3]pseudorotaxane with a stronger bidentate chelating ligand, such as 1,10-phenanthroline (Phen). Substitution of the fluorophoric axle from the [3]pseudorotaxane with about 100% efficiency was achieved by the addition of approximately two equivalents of Phen, and the formation of a Phen-threaded [2]pseudorotaxane was established by ESI-MS of the resulting solution and a single-crystal X-ray study. Axle substitution was also confirmed by a fluorescence titration experiment, which showed a step-wise recovery of the fluorescence intensity of the fluorophoric axle. The association constants for the formation of the [3]- and [2]pseudrotaxanes were calculated from the fluorescence and UV/Vis data. In addition, 2,2'-bipyridine (BPy), which is a relatively weaker bidendate chelating ligand compared to Phen, showed an inefficient and incomplete axle substitution of the [3]pseudorotaxane, although BPy previously showed the formation of [2]pseudrotaxane with the MC-Cu(2+) wheel in solution and ESI-MS studies. In this context, the formation of a BPy-threaded [2]pseudrotaxane was further established by single-crystal X-ray diffraction study.     

Chiral sensing for amino acid derivative based on a [2]rotaxane composed of an asymmetric rotor and an asymmetric axle

A racemic [2]rotaxane, composed of an asymmetric rotor and an asymmetric axle, formed a diastereomer with an amino acid derivative, and showed an optical response for the chiral recognition.     

Synthesis of [1]rotaxane via covalent bond formation and its unique fluorescent response by energy transfer in the presence of lithium ion

Although there have been a lot of reports on the synthesis and properties of [n]rotaxanes (mainly n = 2), only a few reports on the synthesis of [1]rotaxane has been published by V?gtle's group and others (see ref 5). Generally speaking, [1]rotaxane might be expected to exhibit properties different from other rotaxanes, because the rotor and the axle in the [1]rotaxane is bound covalently and closely. We report on a novel method to make [1]rotaxanes via covalent bond formation from a macrocyclic compound. That is, we first prepared a bicyclic compound from macrocycle and then proceeded to [1]rotaxane by aminolysis. This is the first synthetic example of preparation of [1]rotaxane via covalent bond formation, not utilizing weak interactions such as hydrogen bonding, charge transfer, via metal complexation, etc. This method might provide a powerful and new tool for construction of [1]rotaxane as a new supramolecular system. In addition, we investigated energy transfer from rotor to axle using [1]rotaxane that we prepared. Energy transfer occurred perfectly from the naphthalene ring of the rotor to the anthracene ring of the axle. We found also that only lithium ion among alkali ions can drastically enhance the fluorescence intensity. This finding could be applicable to ion-sensing systems, switching devices, and so on.     

Templated conversion of a crown ether-containing macrobicycle into [2]rotaxanes

A crown ether-containing macrobicycle was used as the wheel component in a templated synthesis of a [2]rotaxane with an acetal-containing axle. The molecular structures of the macrobicycle and the [2]rotaxane were characterized by NMR spectroscopy and X-ray crystallography. The chloride-binding ability of the macrobicycle, either free in solution or when it is part of a [2]rotaxane, is quite weak as determined by NMR titration experiments. A second analogous [2]rotaxane, with a longer axle, was synthesized, and its solvent-dependent co-conformation was characterized by 2D NMR spectroscopy. The position of the wheel along the axle can be controlled by the solvent polarity, however, attempts to use metal cations such as Na(+), K(+), Ba(2+), and Ag(+) to switch the wheel position in polar solvents were unsuccessful.     

Synthesis of triazolium-based mono- and tris-branched [1]rotaxanes using a molecular transporter of dibenzo-24-crown-8

We report a diverted route to [1]rotaxane and tris-branched [1]rotaxane that are devoid of any efficient template and which could not be obtained by classical straightforward strategies. The described chemical route relies on the utilization of a “macrocycle transporter”, which is able first to bind a macrocycle, second to link temporarily a triazolium-containing molecular axle, and third to deliver the macrocycle around the new docked axle through molecular machinery in a [1]rotaxane structure. The extended encircled thread is eventually cleaved by an amine or a triamine to afford the triazolium-containing [1]rotaxanes, releasing at the same time, the macrocycle transporter as a recyclable species.     

Crown ether-tert-ammonium salt complex fixed as rotaxane and its derivation to nonionic rotaxane

First rotaxane having tert-ammonium axle was prepared from tert-ammonium salt axle and dibenzo-24-crown-8-ether (DB24C8) wheel, suggesting that tert-ammonium salt axle forms the corresponding threaded complex with a crown ether. Same rotaxane was obtained quantitatively by N-methylation of sec-ammonium-type rotaxane. The tert-ammonium-type rotaxane was neutralized with amine base to tert-amine-type rotaxane in 100% yield, indicating the first isolation of ‘nonionic’ amine-type rotaxane. The reversible protonation and deprotonation of tert-amine-type rotaxane were achieved.     

Selective synthesis of a [3]rotaxane consisting of size-complementary components and its stepwise deslippage

An α-cyclodextrin-based size-complementary [3]rotaxane with an alkylene axle was selectively synthesized in one pot via an end-capping reaction with 2-bromophenyl isocyanate in water. Thermal degradation of the [3]rotaxane product yielded not only the original components but also the [2]rotaxane. Thermodynamic studies suggested a stepwise deslippage process.     

Frontispiece: The Effect of the Axle End Structure and Number of Through-Space Bonds on the Properties of Rotaxane Crosslinked Polymers

A rotaxane crosslinker (RC) is known to toughen the resulting rotaxane crosslinked polymer (RCP) via a stress dispersion effect that is attributed to the movable nature of the crosslinking structure. To evaluate this toughening mechanism in detail, a series of structure-definite RCs equipped with different axle end structures or different numbers of wheel components were synthesized, and subjected to free radical polymerization with a vinyl monomer to obtain RCPs. Analyses of the obtained RCPs revealed that the size of the axle end structure should be well-balanced to produce a strong toughening effect, and a [3]rotaxane crosslinker works more effectively than [2]rotaxane to toughen RCPs. The mobility of the crosslinking points, in terms of rotational and flipping movements, was more crucial to toughening the RCP than that of translational movement along the axle. The first observation of the above crucial findings proved the utility of the systematic molecular design used in this study.