Phenylethynyl terminated oligoimides derived from 3,3′,4,4′-diphenylsulfonetetracarboxylic dianhydride and their adhesive properties

A series of phenylethynyl terminated oligoimides based on 3,3′,4,4′-diphenylsulfonetetracarboxylic dianhydride (DSDA), m-phenylene diamine (m-PDA) or/and 1,4-bis(4-amino-2-trifluoromethylphenoxy)benzene (6FAPB) with calculated molecular weight of 5000 g mol⁻¹ were synthesized. The effect of molecular structure on solubility and melt viscosity of oligoimides as well as the thermal properties of cured polyimide resins was investigated. Experimental results indicated that the oligoimides have good solubility in strong polar solvents to afford homogeneous solutions with the solid content as high as 50 wt%. The oligoimides exhibited better solubility and lower minimum melt viscosity at relatively lower temperature with the incorporation of flexible 6FAPB. These oligoimides could be thermally cured at 320-380 °C to give thermosetted resins. The cured resins have good thermal stability with the glass transition temperatures of 278-329 °C and the onset decomposition temperatures higher than 500 °C. Adhesive properties of polyimides adhered to stainless steel at various conditions were evaluated by lap shear strength test. It was found that the LSS at room temperature increased with the molar ratio of 6FAPB increasing. The polyimides with combination of rigid and flexible structures exhibited good adhesive properties. With the increasing of curing temperature, the lap shear strength of polyimides at elevated temperature maintained at a high level due to the formation of strong bond.     

Monitoring of the polycondensation reaction of bisphenol A and 4,4′-dichlorodiphenylsulfone towards polysulfone (PSU) by real-time ATR-FTIR spectroscopy

The present study demonstrates a real-time ATR-FTIR spectroscopic monitoring of the PSU polycondensation reaction. The analytical interpretation of the real-time IR spectra with respect to different reaction steps was carried out on the basis of characteristic vibration bands of monomers and PSU. Moreover, the tracing of the polycondensation reaction in reference to the generated concentration of PSU and averaged molar masses were also under consideration. The molar masses of the synthesized low- and high-molecular PSUs determined by different analytical methods were compared. A selective calibration of PSU concentrations was calculated by a chemometric method and confirmed by two validation procedures. This calibration was used for the monitoring of PSU polycondensation reaction to get information on the kinetics of the described reaction.     

Improved activity of horseradish peroxidase (HRP) in ‘specifically designed’ ionic liquid

The ionic liquid (IL), tetrakis (2-hydroxyethyl) ammonium triflouromethanesulfonate is rationally designed for horseradish peroxidase (HRP) on the basis of its stability and activity in the presence of an excipient, tris(hydroxymethyl)aminoethane (TRIS) in different ILs. The activity of HRP in this tailor made IL is at least 30-240-fold higher than that in conventional ILs. Also, the activity is more than 10 times greater than that in methanol, a common organic solvent used for HRP.     

Anionic polymerization of styrene in ionic liquids

For the first time anionic polymerization of styrene has been successfully carried out at ambient temperatures in an ionic liquid, providing milder reaction conditions than classical methods. The addition of the zwitterion provides better dissociation of the metal cation based initiators and the IL based reaction allows the use of a much milder Lewis base initiator than is usually required. The present method also eliminates the traditional solvents and rigorous reaction conditions.     

Thermal imidization of poly(pyromellitic dianhydride-4,4′-oxydianiline) precursors on fluoropolymers modified by surface graft-copolymerization with glycidyl methacrylate

Composite films of polyimide (PI) and poly(tetrafluoroethylene-co-hexafluoropropylene) (FEP) or of PI and poly(tetrafluoroethylene) (PTFE) were prepared by thermal imidization of the poly(amic acid) (PAA) precursors of poly(pyromellitic dianhydride-4,4′-oxydianiline) (PMPA-ODA) on glycidyl methacrylate (GMA) graft-copolymerized FEP and PTFE films. The resulting PI/GMA-g-FEP and PI/GMA-g-PTFE composites exhibited T-peel adhesion strength of approximately 7.0 and 6.5 N/cm, respectively, compared to negligible adhesion strength for the laminates prepared from thermal imidization of the PAA on the pristine and the Ar plasma-treated FEP and PTFE films. X-ray photoelectron spectroscopy (XPS) results revealed that both the PI/GMA-g-FEP and PI/FEP-g-PTFE composite films delaminated by cohesive failure inside the FEP and PTFE films, respectively. The so-delaminated PI films with a covalently tethered FEP or PTFE surface layer were highly hydrophobic, having static water contact angles above 140°. The highly hydrophobic property depends on both the composition and roughness of the delaminated surface.     

Surface-bonded ionic liquid stationary phases in high-performance liquid chromatography—A review

Ionic liquids (ILs) are a class of ionic, nonmolecular solvents which remain in liquid state at temperatures below 100 °C. ILs possess a variety of properties including low to negligible vapor pressure, high thermal stability, miscibility with water or a variety of organic solvents, and variable viscosity. IL-modified silica as novel high-performance liquid chromatography (HPLC) stationary phases have attracted considerable attention for their differential behavior and low free-silanol activity. Indeed, around 21 surface-confined ionic liquids (SCIL) stationary phases have been developed in the last six years. Their chromatographic behavior has been studied, and, despite the presence of a positive charge on the stationary phase, they showed considerable promise for the separation of neutral solutes (not only basic analytes), when operated in reversed phase mode. This aspect points to the potential for truly multimodal stationary phases. This review attempts to summarize the state-of-the-art about SCIL phases including their preparation, chromatographic behavior, and analytical performance.     

Physicochemical investigation of the solubilization of ytterbium nitrate in AOT reverse micelles and liquid crystals

A wide investigation of the solubilization of the water-soluble salt Yb(NO₃)₃ in sodium bis(2-ethylhexyl)sulfosuccinate (AOT) reverse micelles and AOT liquid crystals has been carried out. After saturation of water/AOT/organic solvent w/o microemulsions with pure Yb(NO₃)₃, the Yb(NO₃)₃/AOT composites were prepared by complete evaporation under vacuum of the volatile components (water and organic solvent) of the salt-containing microemulsions. It was observed that these composites can be totally dissolved in pure n-heptane or CCl₄, allowing the solubilization of a noticeable amount of Yb(NO₃)₃ in quite dry apolar media. By UV–vis–NIR, FT-IR, and ¹H NMR spectroscopies, some information on the state of Yb(NO₃)₃ within AOT reverse micelles were acquired, whereas by small angle X-ray scattering (SAXS), it has been ascertained that Yb(NO₃)₃ is quite homogeneously distributed as very small clusters among the reverse micelles. An analysis of SAXS and wide-angle X-ray scattering spectra of Yb(NO₃)₃/AOT composites leads to the hypothesis that, also in these systems, Yb(NO₃)₃ is dispersed in the surfactant matrix as very small clusters.     

Asymmetric hydrogenation of methyl α-benzamido cinnamate in ionic liquid solvent

The room temperature ionic liquid EMIMOTf was employed as the sole reaction solvent for the asymmetric hydrogenation of methyl α-benzamido cinnamate. Under conditions of 60 psi hydrogen and 50 °C for 24 h, near quantitative conversions were observed using both the achiral DiPFc-Rh catalyst, and the chiral EtDuPHOS-Rh catalysts. Enantiomeric excess of 89% ee was observed for hydrogenations carried out with the chiral catalyst.     

A green and novel procedure for the preparation of ionic liquid

A green and novel procedure is described for the preparation of a series of ionic liquid containing alkylimidazolium-based or N-alkylpyridinium-based cations and hexafluorophosphate-based or tetrafluoroborate-based anions in one-pot solvent-free conditions to give excellent yields with shortened time.     

Analysis by desorption of volatile impurities from an ionic liquid solution in an unmodified gas chromatograph inlet

A procedure for using ionic liquids to determine volatile impurities in compounds or matrices that are soluble in an ionic liquid is described. Using a conventional autosampler a droplet of ionic liquid solution is suspended in the inlet of the gas chromatograph and analytes are desorbed onto a GC column using splitless injection conditions. Results are presented for 1,2-propanediol, nonane, N,N-dimethylacetamide, and mesitylene in two different compounds in the ionic liquids trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide and trihexyltetradecylphosphonium dicyanamide.     

Gelation of an amino acid ionic liquid by the addition of a phosphonium-type zwitterion

1-Ethyl-3-methylimidazolium leucine, a typical amino acid ionic liquid, turns into a thermotropic and ion conductive gel while retaining its ion pair upon adding a phosphonium-type zwitterion.     

Identification of ionic liquid components by RP‐HPLC with diode array detector using chaotropic effect and perturbation technique

Sodium hexafluorophosphate, perchlorate and tetrafluoroborate were applied as the ion‐pair reagents in reversed‐phase chromatography of several imidazolium‐based ionic liquids. The optimization of the retention was performed by changing the kind of organic modifier (methanol, acetonitrile), concentration and the kind of the ion‐pair reagents in the mobile phase and the column kind (Zorbax SB‐C18, Zorbax SB‐Phenyl, Zorbax SB‐CN, Zorbax SB‐NH₂ and Supelcosil LC‐F). The selectivity of the proposed chromatographic systems according to the cation kind was compared on the basis of the resolution of ionic liquid mixture. The perturbation method was applied to identify the anion kind. The formation of ion‐associated complexes between promethazine as counter‐cation and chaotropic anions controlling their retention was confirmed.     

Capillary isotachophoresis for the analysis of ionic liquid entities

Simple, selective and sensitive isotachophoretic methods for the analysis of ionic liquid (IL) compartments were developed in this study. A leading electrolyte containing 10 mM L ‐histidine + 10 mM histidine hydrochloride and a terminating electrolyte containing 5 mM glutamic acid + 5 mM L ‐histidine were selected to separate nitrate(V), chlorate(V), hexafluorophosphate, dicyanimide, trifluoromethanesulfonate, phosphate(V) and bis(trifluoromethanesulfonyl)imide in anionic mode. In contrast, seven short‐chain alkylimidazolium, alkylpyrrolidinium, alkylpyridinium and non‐chromophoric tetraalkylammonium and tetraalkylphosphonium IL cations were separated with 10 mM potassium hydroxide + 10 mM acetic acid as leading electrolyte, and 10 mM β‐alanine + 10 mM acetate as terminating electrolyte. Both methods were optimized and validated with good analytical performance parameters. LOD was about 3–5 μM, and the repeatability lay in the range of 1.06–5.59%. These methods were evaluated for their applicability to the analysis of soil samples and freshwater contaminated with ILs. In light of hitherto the absence of reports on the determination of non‐chromophoric IL cations, this study delivers for the first time a universal method enabling analysis of these species. Moreover, as there is still significant lack of methodologies of IL anion analysis, the obtained results offer an interesting alternative in that matter.     

Use of selective ionic liquids and ionic liquid/salt mixtures as entrainer in a (vapor + liquid) system to separate n-heptane from toluene

During the last years, a large number of studies have evaluated the ability of ionic liquids (ILs) to separate aromatic from aliphatic hydrocarbons by liquid extraction. Nevertheless, in order to design a global process, a post-extraction step based on the aromatic recovery from the extract stream and the regeneration of the IL is required. Taking into account the negligible vapor pressure of the ILs, the use of separation units based on the difference of volatility among the components of the extract could be an appropriate way. However, that requires additional (vapor + liquid) equilibrium (VLE) data, which are scarce today. In this work, the isothermal VLE data for {n-heptane + toluene + 1-ethyl-3-methylimidazolium thiocyanate ([EMim][SCN])} and {n-heptane + toluene + 1-butyl-3-methylimidazolium thiocyanate ([BMim][SCN])} mixtures were experimentally measured at T = (323.2, 343.2 and 363.2) K over the whole composition range within the rich-IL miscibility region. For that, a static headspace gas chromatograph (HS-GC) was used. In addition, the non-random two liquids (NRTL) thermodynamic model was satisfactory applied to correlate the experimental VLE data.Finally, the effect of thiocyanate-based inorganic salts (AgSCN, Co(SCN)₂ and CuSCN) on the phase behavior of the above mentioned mixtures were also analyzed through the experimental determination of the isothermal VLE of the pseudo-ternary systems {n-heptane + toluene + [EMim][SCN]/salt mixture}.The obtained results show that the use of pure thiocyanate-based ILs as entrainer increases the n-heptane relative volatility from toluene whereas the addition of inorganic salts has not led to an improvement of these results.     

Analysis of selected ionic liquid cations by ion exchange chromatography and reversed-phase high performance liquid chromatography

The chromatographic behavior of 8 ionic liquids - 7 homologues of 1-alkyl-3-methylimidazolium and 4-methyl-N-butylpyridinium - has been investigated with a strong cation exchange adsorbent. In particular, the dependence of the retention properties of these solutes on mobile phase composition, pH, and buffer concentration was evaluated with the aim of optimizing and improving the selectivity and retention of solute separation. While using the SCX stationary phase, several interactions occurred with varying strengths, depending on the mobile phase composition. Cation exchange, nonspecific hydrophobic interactions, and adsorption chromatography behavior were observed. Reversed phase chromatography occurred at low concentrations of acetonitrile, electrostatic and adsorption interactions at higher organic modifier concentrations. Elevated buffer concentrations lowered the retention factors without affecting the selectivity of ionic liquids. Obtained results were further compared to the chromatographic behaviour of ionic liquids in the reversed phase system. All analyzed ionic liquids follow reversed-phase behavior while being separated. Much lower selectivity in the range of highly hydrophilic compounds is obtained. This suggests preferred use of ion chromatography for separation and analysis of compounds below 4 carbon atoms in the alkyl side chain.     

Design and synthesis of novel ionic liquid/liquid crystals (ILCs) with axial chirality

As the first examples of axially chiral ionic liquids, new pyridinium salts having a 1,3-dioxan ring in their central core were synthesized. Enantioselective dehydrohalogenation using chiral alkoxides provided a simple and practical approach for their synthesis. Some structures exhibit both low melting point and liquid crystalline behaviour.     

Determination of ammonium and metal ions by capillary electrophoresis-potential gradient detection using ionic liquid as background electrolyte and covalent coating reagent

A capillary zone electrophoresis (CZE)-potential gradient detection (PGD) method coupled with field-amplified sample injection was developed to determine alkali metal, alkaline-earth metal, nickel, lead and ammonium ions. The capillary surface was coated with dialkylimidazolium-based ionic liquid and thus the electroosmotic flow (EOF) of the capillary was reversed. The buffer composed of 7.5 mM lactic acid, 0.6 mM 18-crown-6, 12 mM alpha-cyclodextrin (alpha-CD); it was adjusted to pH 4.0 by 1-hexyl-3-methylimidazolium hydroxide. The 11 cations were baseline separated within 14 min with 5.1-18.9 x 10(4) plates (for 40-cm-long capillary) in separation efficiency, and the detection limits were in the range of 0.27-7.3 ng/ml. The method showed good reproducibility in terms of migration time with RSD < or = 0.90% for run-to-run and < or = 1.65 for day-to-day assessment.     

(Liquid + liquid) equilibria for mixtures of dodecane and ethanol with alkylsulfate-based ionic liquids

The ternary (liquid + liquid) equilibrium (LLE) data for mixtures of dodecane (C₁₂H₂₆) and ethanol with ionic liquids 1,3-dimethylimidazolium methylsulfate [Mmim][MeSO₄], 1-ethyl-3-methylimidazolium methylsulfate, [Emim][MeSO₄] and 1-butyl-3-methylimidazolium methylsulfate, [Bmim][MeSO₄], were studied at T = 298.15 K and 0.101 MPa. The selectivity and solute distribution coefficient ratios determined from the data were used to examine the possibility of using these ionic liquids for extraction of ethanol from dodecane. The temperature dependency was investigated by measuring the LLE data for {dodecane + ethanol + [Mmim][MeSO₄]} at T = 313.15 K and 0.101 MPa. The Othmer–Tobias and Hand equations were used to test the consistency of the tie-line data. The tie-line data were correlated with the Non-Random Two Liquid (NRTL) equation which provided a good model and representation for the experimental results.     

An imidazolium tosylate salt as efficient and recyclable catalyst for acetylation in an ionic liquid

A novel non-metallic salt, 1-butyl-3-methylimidazolium tosylate ([bmim][OTs]) dissolved in the ambient temperature ionic liquid of 1-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF₄]), was found to be the efficient catalyst for acetylation with the advantages of good recyclability, avoidance of metal contamination, mild reaction conditions, and wide availability for substrates (alcohols, phenols, and amines), could completely replace organic bases, metal Lewis acids, or metallic triflates to fulfill acetylation by a nucleophilic catalytic mechanism, which was supported by ¹³C NMR analysis. Correspondence: Ye Liu, Shanghai Key Laboratory of Green Chemistry and Chemical Processes, Chemistry Department of East China Normal University, Shanghai 200062, China.     

Selenium- and tellurium-based ionic liquids and their use in the synthesis of octahydroacridines

A general and easy method for the synthesis of several selenonium and telluronium salts is described. These compounds are acidic liquids at room temperature and were obtained in excellent yields. Phenyl butyl ethyl selenonium tetrafluoroborate was employed in the hetero-Diels-Alder cyclization of aryl imines derived from citronellal, affording octahydroacridines in good yields.