Radiological characterization of phosphate fertilizers: Comparison between alpha and gamma spectrometry

The natural radioactivity in phosphate fertilizers used in central Italy has been measured by alpha and gamma spectrometry. The results show that the specific activities of ²³⁸U, ²³⁴U and ²³⁵U ranged within interval from < 0.5 to 2628.8, from < 0.5 to 2826.3 and from < 0.9 to 138.0 Bq kg^{− 1} respectively and those of ²¹⁰Pb and ²¹⁰Po ranged within interval from < 15.0 to 401.5 and < 0.5 to 351.6 Bq kg^{− 1} respectively. The ²²⁸Th, ²³⁰Th and ²³²Th concentrations found by alpha spectrometry ranged from < 0.5 to 50.2, from 0.9 to 2727.2 and from < 0.5 to 60.8 Bq kg^{− 1} respectively. ²²⁶Ra and ²²⁸Ra activity concentrations ranged from < 14.3 to 290.9 and from < 2.9 to 24.9 respectively. ⁴⁰K specific activities ranged from 39.2 to 8263.7 Bq kg^{− 1}. A very good correlation exists between the activity concentrations found by alpha spectrometry and those found by gamma spectrometry.     

The electrochemistry and determination of Ligustrazine hydrochloride

Ligustrazine is one of the active ingredients contained in Ligusticum chuanxiong Hort. (Umbelliferae), which is widely used in traditional Chinese medicine for the treatment of cardiovascular problems. In this work, the electrochemistry of Ligustrazine hydrochloride (LZC) and its determination are investigated. The detection limit is estimated to be 8.0×10^–8 M, with three linear ranges from 1.0×10^–6 to 1.0×10^–4 M, 1.0×10^–4 to 5.0×10^–4 M, and 6.5×10^–4 to 1.6×10^–3 M. The method has been proved to be highly sensitive, selective, and stable, and has been successfully applied to determining LZC in LZC injections.     

Mercury determination in urine samples by gold nanostructured screen-printed carbon electrodes after vortex-assisted ionic liquid dispersive liquid–liquid microextraction

A novel approach is presented to determine mercury in urine samples, employing vortex-assisted ionic liquid dispersive liquid–liquid microextraction and microvolume back-extraction to prepare samples, and screen-printed electrodes modified with gold nanoparticles for voltammetric analysis. Mercury was extracted directly from non-digested urine samples in a water-immiscible ionic liquid, being back-extracted into an acidic aqueous solution. Subsequently, it was determined using gold nanoparticle-modified screen-printed electrodes. Under optimized microextraction conditions, standard addition calibration was applied to urine samples containing 5, 10 and 15 μg L⁻¹ of mercury. Standard addition calibration curves using standards between 0 and 20 μg L⁻¹ gave a high level of linearity with correlation coefficients ranging from 0.990 to 0.999 (N = 5). The limit of detection was empirical and statistically evaluated, obtaining values that ranged from 0.5 to 1.5 μg L⁻¹, and from 1.1 to 1.3 μg L⁻¹, respectively, which are significantly lower than the threshold level established by the World Health Organization for normal mercury content in urine (i.e., 10–20 μg L⁻¹). A certified reference material (REC-8848/Level II) was analyzed to assess method accuracy finding 87% and 3 μg L⁻¹ as the recovery (trueness) and standard deviation values, respectively. Finally, the method was used to analyze spiked urine samples, obtaining good agreement between spiked and found concentrations (recovery ranged from 97 to 100%).     

Detoxification of antimony by selenium and their interaction in paddy rice under hydroponic conditions

Antimony (Sb) contamination has become a growing concern in recent years. Strategies for reducing Sb contamination and its related health risks are urgently desired. This study was conducted to explore the possibility of selenium (Se) detoxification on Sb toxicity in paddy rice in order to find a feasible method to reduce the health risk of Sb pollution. Seedlings of paddy rice were exposed to 5 mg L⁻¹ Sb (KSbC₄H₄ O₇·1/2H₂O), in the presence of Se (Na₂SeO₃) at 0.1, 1, 5 mg L⁻¹ in culture solution, with no Sb and Se addition as the control. Paddy rice took up Sb greatly and the highest Sb contents measured among all treatments in this experiment in the leaves, stems and roots were 65.5, 298.5 and 195.7 mg kg⁻¹, respectively. Without Sb addition in the solution, single exposure to 0.1 mg L⁻¹ Se remarkably reduced the malondialdehyde (MDA) formation in paddy rice,demonstrating the beneficial effect of Se at low dosages. The addition of 5 mg L⁻¹ Sb was found to generate toxicity to paddy rice, showing as decreased biomass and increased leaf MDA content in paddy rice, while addition of 1 mg L⁻¹ Se mitigated the toxicity of Sb, as seen with the decreased leaf MDA content and increased biomass, indicating antidotal role of Se to Sb. In addition, the presence of 0.1, 1, 5 mg L⁻¹ Se generally decreased the accumulation of Sb in the leaves, stems and roots in paddy rice. Toxicity was also seen when paddy rice was exposed to single Se at 1 and 5 mg L⁻¹ levels, however, 5 mg L⁻¹ Sb addition was found to decrease the contents of Se in the leaves/stems whereas increased them in roots, accompanied with decreased MDA contents and increased biomass in paddy rice, indicating a possible detoxification role of Sb to Se too. Therefore, Sb, although toxic, could also be an antitoxin to Se in paddy rice at certain condition. Our results showed that Se could alleviate Sb toxicity efficiently in paddy rice through two effects as antagonism and antioxidation.     

Sensitive and selective detection of aspartic acid and glutamic acid based on polythiophene-gold nanoparticles composite

In recent years, gold nanoparticles and water-soluble fluorescent conjugated polymers are promising materials in terms of their potential applications in a variety of fields, ranging from monitoring DNA hybridization to demonstrate the interaction between proteins, or detecting diseased cell, metal ions and small biomolecular. In order to exploit some new properties of the both, many attempts have been devoted to achieve nanoparticle-polymer composite via incorporating metal nanoparticle into polymer or vice versa, however, only few of them are put into practical application. In the present paper, we utilize the “superquenching” property of AuNPs to polythiophene derivatives for detecting aspartic acid (Asp) and glutamic acid (Glu) in pure water, and discuss the factors accounting for fluorescence quenching and recovery via modulating pH. Thus an exceptionally simple, rapid and sensitive method for detecting Asp and Glu is established with a limit of detection (LOD) is 32 nM for Asp and 57 nM for Glu, the linear range of determination for Asp is 7.5 × 10⁻⁸ M to 6 × 10⁻⁶ M and 9.0 × 10⁻⁸ M to 5 × 10⁻⁶ M for Glu. The system is applied to real sample detection and the results are satisfying. Otherwise the composite is very sensitive to pH change of solution, we expect it will be possible to use as pH sensor with wide range in the future.     

Validation of a high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of tetracyclines residues in bovine milk

A high-performance liquid chromatography-fluorescence detection method was optimized and validated to determine tetracyclines residues in bovine milk. Post-column derivatization using metal complexation in non-aqueous reagent increased the fluorescence of chelates by a factor up to 2.54 compared to water (signal-to-noise ratio enhancement). Overall recoveries ranged from 61 to 115%, with RSD_r from 5 to 15% (n = 54). Detection limits ranged from 5 to 35 μg kg⁻¹. Limits of quantification were established at 50 μg kg⁻¹. Decision limits (CCα) were 109, 108 and 124 μg kg⁻¹ and detection capabilities (CCβ) 119, 117 and 161 μg kg⁻¹ for oxytetracycline, tetracycline and chlortetracycline, respectively. The method was applied successfully in a national monitoring program.     

Evolution of the Texture and Structure of SiO2–Al2O3 Xerogels and Aerogels as a Function of the Si to Al Molar Ratio

SiO₂–Al₂O₃ aerogels and xerogels with a Si to Al molar ratio r _Si/Al varying from 0.25 to 20, were made by sol-gel process in acidic conditions at pH 2 and respectively dried by the CO₂ supercritical method and by solvent evaporation. The Al precursor was also chelated with ethylacetoacetate, which made it possible to study the structure and texture of such gels in conditions favorable to the formation of mixed Al–O–Si bonds. Nitrogen adsorption isotherms according to the Brunauer, Emmett and Teller method (BET), ²⁷Al magic angle spinning nuclear magnetic resonance (²⁷Al MAS-NMR), Fourier Transformed Infrared Spectroscopy (FTIR) and Infrared absorbance spectra after Temperature Programmed Desorption (TPD) of pyridine, showed that the Si–O infrared asymmetric stretching vibration and the Bronsted acidity relative to the Lewis acidity, depended on the ratio of Al^IV to Si atoms.     

Adsorption and preconcentration of divalent metal ions in fossil fuels and biofuels: gasoline, diesel, biodiesel, diesel-like and ethanol by using chitosan microspheres and thermodynamic approach

Biodiesel and diesel-like have been obtained from soybean oil by transesterification and thermal cracking process, respectively. These biofuels were characterized as according to ANP standards by using specific ASTM methods. Ethanol, gasoline, and diesel were purchased from a gas station. Deacetylation degree of chitosan was determined by three distinct methods (conductimetry, FTIR and NMR), and the average degree was 78.95%. The chitosan microspheres were prepared from chitosan by split-coating and these spheres were crosslinked using glutaraldehyde. The surface area of microspheres was determined by BET method, and the surface area of crosslinked microspheres was 9.2 m² g⁻¹. The adsorption isotherms of cooper, nickel and zinc on microspheres of chitosan were determined in petroleum derivatives (gasoline and diesel oil), as well as in biofuels (alcohol, biodiesel and diesel-like). The adsorption order in all fuels was: Cu > Ni > Zn. The elution tests presented the following preconcentration degrees: >4.5 to ethanol, >4.4 to gasoline, >4.0 to diesel, >3.8 to biodiesel and >3.6 to diesel-like. The application of chitosan microspheres in the metal ions preconcentration showed the potential of this biopolymer to enrich fuel sample in order to be analyzed by flame atomic absorption spectrometry.     

Ion-beam irradiation effects on polyimide-UV–vis and infrared spectroscopic study

Ion-beam irradiation effects on polyimide, Kapton™, were studied with respect to optical and electronic properties. Stack films of Kapton™ (12.5 μm thick) were irradiated to various ion beams in air or vacuo at room temperature and subjected to ultraviolet–visible (UV–vis) spectroscopy, and change in absorbance and energy gap is discussed. The UV–vis absorption spectrum, which is assigned to the transition of electrons in benzene rings from π to π* orbital, upon He²⁺ (6 MeV/u) irradiation in air, shifted towards longer wavelength direction for all cases, and the shift was more obvious for higher linear energy transfer (LET) ion beams. The energy gap of the transition was estimated, and the H⁺ and He²⁺ ion beams caused little change in the transition energy gap Eg, while the heavier ions such as C⁶⁺ and Si¹⁴⁺ caused more significant decrease. This decrease is assumed to the structural changes around benzene rings, and the infrared spectroscopy revealed breakage in imide groups next to benzene ring in the repeating unit of polyimide.     

Highly sensitive and interference-free determination of bismuth in environmental samples by electrothermal vaporization atomic fluorescence spectrometry after hydride trapping on iridium-coated tungsten coil

Bismuthine was on-line trapped on tungsten coil and subsequently electrothermally vaporized for the determination by atomic fluorescence spectrometry (AFS). Several noble metals, including Pd, Rh, Pt, and Ir, were explored as permanent chemical modifier for tungsten coil on-line trapping. Investigation showed that Ir gave the best performance, in which bismuthine was on-line trapped on Ir-coated tungsten coil at 560 °C, and then released at 1550 °C for subsequent transfer to AFS by a mixture of Ar and H₂. Under optimum instrumental conditions, the trapping efficiency was found to be 73 ± 3%. With 120 s (12 mL sample volume) trapping time, a limit of detection (LOD) of 4 ng L^− 1 was obtained, compared to conventional hydride generation AFS (0.09 μg L^− 1); the LOD can be lowered down to 1 ng L^− 1 by increasing the trapping time to 480 s. The LOD was found to be better or at least comparable to literature levels involving on-line trapping and some other sophisticated instrumental methods such as ICP-MS and GF-AAS. A comprehensive interference study involving conventional hydride-forming elements and some transition metals was carried out, and the result showed that the gas phase interference from other hydride-forming elements was largely reduced, thanks to the use of on-line tungsten coil trapping. Finally, the proposed method was applied to the determination of bismuth in several biological and environmental standard reference materials, and a t-test shows that the analytical results by the proposed method have no significant difference from the certified values at the confidence level of 95%.     

On the formation of smaller p‐block endohedral fullerenes: Bonding analysis in the E@C20 (E = Si,Ge, Sn,Pb) series from relativistic DFT calculations

Experimentally characterized endohedral metallofullerenes are of current interest in expanding the range of viable fullerenic structures and their applications. Smaller metallofullerenes, such as M@C₂₈, show that several d‐ and f‐block elements can be efficiently confined in relatively small carbon cages. This article explores the potential capabilities of the smallest fullerene cage, that is, C₂₀, to encapsulate p‐block elements from group 14, that is, E = Si, Ge, Sn, and Pb. Our interest relates to the bonding features and optical properties related to E@C₂₀. The results indicate both s‐ and p‐type concentric bonds, in contrast to the well explored endohedral structures encapsulating f‐block elements. Our results suggest the E@C₂₀ series to be a new family of viable endohedral fullerenes. In addition spectroscopic properties related to electron affinity, optical, and vibrational were modeled to gain further information useful for characterization. Characteristic optical patterns were studied predicting a distinctive first peak located between 400 and 250 nm, which is red‐shifted going to the heavier encapsulated Group 14 atoms. Electron affinity properties expose different patterns useful to differentiate the hollow C₂₀ fullerene to the proposed p‐block endohedral counterparts. © 2017 Wiley Periodicals, Inc.     

Biotin-avidin mediated competitive enzyme-linked immunosorbent assay to detect residues of tetracyclines in milk

Tetracycline (TC) antibiotics are widely used for prevention and control of disease because they inhibit the growth of bacteria. However, the presence of TC antibiotics residues in food causes harmful effects on consumer's health such as allergic reactions, liver damage and gastrointestinal disturbance, so that many countries have set MRLs (maximum residue levels). Therefore, it is necessary to detect tetracycline residues, to develop suitable analytical techniques to be used as routine screens and field detection.A new approach to the biotin-avidin mediated competitive ELISA is developed to determine tetracycline residues in milk. After optimization, the LOD and LOQ were 1.0 × 10^− 10 M (0.048 μg/L) and 1.0 × 10^− 9 M, respectively, and the working range from 3.16 × 10^− 10 M to 3.16 × 10^− 7 M toward TC in milk. No cross-reactivity was observed with the structurally similar compounds; chlortetracycline (13.7%), oxytetracycline (10%) and doxytetracycline (< 1%). Additionally percent recoveries of TC spiked in milk were quite satisfactory (∼ 90%). Comparing our results obtained in this work with others, it shows with the capability to detect TC ranging in MRLs (100 μg/L in milk) sufficiently with highly sensitivity in milk, and with simple pre-treatment. In addition, this method can apply to developing useful ELISA test kit for determination of TCs in milk.     

Polymer drying. VI. EPR spin-probe studies on swelled poly(styrene-co-divinylbenzene)

The electron paramagnetic resonance (EPR) signal and the residual number (α_t) of volatile molecules per phenyl group of poly(styrene-co-divinylbenzene) in samples that had been swelled to saturation in a dilute solution of a nitroxide spin-probe (TEMPO or 4-oxo-TEMPO), dissolved in a volatile liquid, were monitored simultaneously as the system containing excess liquid was allowed to evaporate to dryness. The results showed that the characteristic motionally narrowed three-line EPR spectrum began to change when α_t became equal to α_g (the number of sorbed molecules per phenyl group of polymer at liquid-saturation). The ratio of the intensity of the low-field and high-field hyperfine peaks relative to the middle peak decreased monotonically to an asymptotic limit that was attained when α_t became equal to α_g (the number of residual adsorbed molecules per phenyl group of polymer at completion of the transition from the rubbery state to the glassy state). The EPR hyperfine pattern, from which the rotational correlation times were estimated, changed most significantly as α_t decreased from α_G to α_g while exhibiting inflections at about α′_s and α′_g the compositions that mark, respectively, incipient desorption of adsorbed molecules and incipient transition from the rubbery state to the glassy state. The pattern between these inflections points, however, varied with the affinity of the solvent for the polymer.     

Resilient and agile engineering solutions to address societal challenges such as coronavirus pandemic

The world is witnessing tumultuous times as major economic powers including the US, UK, Russia, India, and most of Europe continue to be in a state of lockdown. The worst-hit sectors due to this lockdown are sales, production (manufacturing), transport (aerospace and automotive) and tourism. Lockdowns became necessary as a preventive measure to avoid the spread of the contagious and infectious “Coronavirus Disease 2019” (COVID-19). This newly identified disease is caused by a new strain of the virus being referred to as Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS CoV-2; formerly called 2019-nCoV). We review the current medical and manufacturing response to COVID-19, including advances in instrumentation, sensing, use of lasers, fumigation chambers and development of novel tools such as lab-on-the-chip using combinatorial additive and subtractive manufacturing techniques and use of molecular modelling and molecular docking in drug and vaccine discovery. We also offer perspectives on future considerations on climate change, outsourced versus indigenous manufacturing, automation, and antimicrobial resistance. Overall, this paper attempts to identify key areas where manufacturing can be employed to address societal challenges such as COVID-19.     

Water Reduction and Dihydrogen Addition in Aqueous Conditions With ansa-Phosphinoborane

Ortho-phenylene-bridged phosphinoborane (2,6-Cl₂Ph)₂B-C₆H₄-PCy₂ 1 was synthesized in three steps from commercially available starting materials. 1 reacts with H₂ or H₂O under mild conditions to form corresponding zwitterionic phosphonium borates 1-H₂ or 1-H₂O . NMR studies revealed both reactions to be remarkably reversible. Thus, when exposed to H₂, 1-H₂O partially converts to 1-H₂ even in the presence of multiple equivalents of water in the solution. The addition of parahydrogen to 1 leads to nuclear spin hyperpolarization both in dry and hydrous solvents, confirming the dissociation of 1-H₂O to free 1 . These observations were supported by computational studies indicating that the formation of 1-H₂ and 1-H₂O from 1 are thermodynamically favored. Unexpectedly, 1-H₂O can release molecular hydrogen to form phosphine oxide 1-O . Kinetic, mechanistic, and computational (DFT) studies were used to elucidate the unique “umpolung” water reduction mechanism.     

Glucose-induced heat production, insulin secretion and lactate production in isolated Wistar rat pancreatic islets

Transplantation of pancreatic islets is efficient in improving the metabolic control and quality of life and in preventing severe hypoglycemia in patients with brittle type 1 diabetes mellitus. More accurate methods to assess islet viability would be extremely useful in designing target interventions for islet cytoprotection and in reducing the number of islets required to achieve insulin independence. Here we report on an application of calorimetry to evaluate the metabolic response of pancreatic islets to glucose stimulation. A significant increase in metabolic heat was produced by islet samples when consecutively subjected to 2.8 and 16.3 mmol L⁻¹ glucose. Under these glucose concentrations, 1000 islets released average heat values of 9.16 ± 0.71 mJ and 14.90 ± 1.21 mJ over 50 min, respectively. Additionally, the glucose stimulation indexes were 1.67 ± 0.30 for insulin, 1.72 ± 0.13 for heat and 2.91 ± 0.50 for lactate, raising the important possibility of substituting the secreted insulin index/ratio by the index/ratio of the heat released in the evaluation of Langerhans islets viability for transplantation. Altogether, our results demonstrate the applicability of calorimetry to assess the quality of isolated pancreatic islets and to study vital islet functions.     

Use of cetyltrimethylammonium bromide as surfactant for the determination of copper and chromium in gasoline emulsions by electrothermal atomic absorption spectrometry

In this work, the use of cetyltrimethylammonium bromide as surfactant for the preparation of oil-in-water emulsions for the determination of Cu and Cr in gasoline by electrothermal atomic absorption spectrometry (ET AAS) was evaluated. The surfactant amount was tested in the range of 25 to 300 mg, added to 2 ml of gasoline, and completed to 10 mL with 0.1% (v/v) nitric acid solution. 150 mg of surfactant was found optimum, and a sonication time of 10 min sufficient to form an oil-in-water emulsion that was stable for several hours. The ET AAS temperature program was established based on pyrolysis and atomization curves. The pyrolysis temperatures were set at 700 and 1300 °C for Cu and Cr, respectively and the selected atomization temperatures were 2400 and 2500 °C. The time and temperature of the drying stage and the atomization time were experimentally tested to provide optimum conditions. The limits of detection were found to be 5 μg L^− 1 and 1.5 μg L^− 1 for Cu and Cr, respectively in the original gasoline samples. The relative standard deviation (RSD) ranged from 4 to 9% in oil-in-water emulsions spiked with 5 μg L^− 1 and 15 μg L^− 1 of each metal, respectively. Recoveries varied from 90 to 98%. The accuracy of the proposed method was tested by an alternate procedure using complete evaporation of the gasoline sample. The method was adequate for the determination of Cu and Cr in gasoline samples collected from different gas stations in Salvador, BA, Brazil.     

Determination of iodide by detection of iodine using gas-diffusion flow injection and chemiluminescence

This work describes development of a flow injection (FI) system for determination of iodide, based on the chemiluminescence (CL) reaction between iodine and luminol. Iodide in the sample zone is oxidized to iodine. Employment of a gas-diffusion (GD) unit allows for selective detection of the generated CL (425 nm). Preliminary results showed for concentrations of less than 2 mg L⁻¹, that signals were irreproducible and that the calibration was not linear.In order to solve these problems, a method of ‘membrane conditioning’ was investigated, in which iodide stream was continuously merged with oxidant to generate I₂ that conditioned the GD membrane and tubing. This minimized surface interaction between the active surface and the I₂ generated from the samples, thus improving both precision and sensitivity. By employing membrane conditioning, it has been possible to reliably detect concentrations down to 0.1 mg L⁻¹.At the optimized condition, an excellent linear calibration (r² = 0.999) was obtained from 0.1 to 1.0 mg L⁻¹. The method was successfully applied to determine iodide in some pharmaceutical products such as potassium iodide tablets and a liquid patent medicine. However, for vitamin tablets, ascorbic acid was found to interfere seriously by causing a negative signal.     

Structure and Magnetic Properties of Nickel–Zinc Ferrite Nanoparticles Prepared by Glass Crystallization Method

Summary. The magnetic and microstructure properties of Fe₂O₃–0.4NiO–0.6ZnO–B₂O₃ glass system, which was subjected to heat treatment in order to induce a magnetic crystalline phase (Ni_0.4Zn_0.6-Fe₂O₄ crystals) within the glass matrix, were investigated. DSC measurement was performed to reveal the crystallization temperature of the prepared glass sample. The obtained samples, produced by heat treatment at 765°C for various times (1, 1.5, 2, and 3 h), were characterized by X-ray diffraction, IR spectra, transmission electron microscopy, and vibrating sample magnetometer. The results indicated the formation of spinel Ni–Zn ferrite in the glass matrix. Particles of the ferrite with sizes ranging from 28 to 120 nm depending on the sintering time were observed. The coercivity values for different heat-treatment samples were found to be in the range from 15.2 to 100 Oe. The combination of zinc content and sintering times leads to samples with saturation magnetization ranging from 12.25 to 17.82 emu/g.     

Front face synchronous fluorescence as a tool for the quality assurance of Greek milk

This research focuses on implementing the low cost and rapid front face synchronous fluorescence (SyFS) in order to ensure the quality assurance of Greek milk. Specifically, samples originated from the Greek domestic production of goat, sheep, cow, as well as foreign cow milk samples and adulterated cow milk samples. SyFS spectra were acquired in the excitation area of 250–500 nm with (Δλ)= 100 nm. Greek and foreign cow milk samples were differentiated based on intensity variations at wavelengths 350–515 nm, 540–579 nm, and 580–600 nm. The emissions at these wavelength positions correspond to tryptophan, vitamin A, and riboflavin. The supervised model with 94 samples exhibited p-value = 7,98E-11, RMSEE= 0,29171, RMSEcv= 0,29284 and RMSEP= 0,98013, AUROC for Greek samples= 0,61 and AUROC for foreign= 0,85. We differentiated milk samples according to the animal type with PCA and OPLS-DA models of 107 samples exhibiting RMSEE= 0,225842, RMSEcv= 0,228054 and RMSEP= 0,518635, AUROC for sheep samples= 0,99, AUROC for goat samples= 0,98 and AUROC for cow samples= 0,96. In fact, the emission band 350–591 nm characterized sheep milk and corresponds to aminoacids and fatty acids, cow milk was related to the 350–600 nm emission band related to the b-carotene and to the goat milk the emission bands 350–505 nm and 520–600 nm were attributed to tryptophan, NADH and Rivoflabin. Finally, we investigated whether SyFS coupled with chemometrics may provide preliminary evidence on adulterated cow milk samples. All models were validated with permutation testing, p-values and ROC curves.