The first entry to 5,6-dihydroxy-3-mercaptoindole, 5-hydroxy-3-mercaptoindole and their 2-carbomethoxy derivatives by a mild thiocyanation/reduction methodology

The hitherto unknown 5,6-dihydroxy-3-mercaptoindole (4a) and its 2-carbomethoxy derivative (4b), as well as the analogous 5-hydroxy 3-mercaptoindoles, have been conveniently obtained as O,S-acetyl derivatives 3a-d by thiocyanation of the corresponding acetoxyindoles 1a-d with the NH₄SCN/oxone system followed by SmI₂ reduction and acetylation.     

Synthesis and properties of novel 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-triones: methodology for synthesizing cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates

Novel condensation reaction of tropone with N-substituted and N,N′-disubstitued barbituric acids in Ac₂O afforded 5-(cyclohepta-2′,4′,6′-trienylidene)pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (8a-f) in moderate to good yields. The ¹³C NMR spectral study of 8a-f revealed that the contribution of zwitterionic resonance structures is less important as compared with that of 8,8-dicyanoheptafulvene. The rotational barriers (ΔG^‡) around the exocyclic double bond of mono-substituted derivatives 8a-c were obtained to be 14.51-15.03 kcal mol⁻¹ by the variable temperature ¹H NMR measurements. The electrochemical properties of 8a-f were also studied by CV measurement. Upon treatment with DDQ, 8a-c underwent oxidative cyclization to give two products, 7 and 9-substituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborates (11a-c·BF₄⁻ and 12a-c·BF₄⁻) in various ratios, while that of disubstituted derivatives 8d-f afforded 7,9-disubstituted cyclohepta[b]pyrimido[5,4-d]furan-8(7H),10(9H)-dionylium tetrafluoroborate (11d-f·BF₄⁻) in good yields. Similarly, preparation of known 5-(1′-oxocycloheptatrien-2′-yl)-pyrimidine-2(1H),4(3H),6(5H)-trione derivatives (14a-d) and novel derivatives 14e,f was carried out. Treatment of 14a-c with aq. HBF₄/Ac₂O afforded two kinds of novel products 11a-c·BF₄⁻ and 12a,c·BF₄⁻ in various ratios, respectively, while that of 14d-f afforded 11d-f. The product ratios of 11a-c·BF₄⁻ and 12a-c·BF₄⁻ observed in two kinds of cyclization reactions were rationalized on the basis of MO calculations of model compounds 20a and 21a. The spectroscopic and electrochemical properties of 11a-f·BF₄⁻ and 12a-c·BF₄⁻ were studied, and structural characterization of 11c·BF₄⁻ based on the X-ray crystal analysis and MO calculation was also performed.     

Short-step syntheses and complexation properties of Z,Z-tribenzodidehydro- and all-Z-tribenzo[12]annulenes

Syntheses of all-Z-tribenzo[12]annulenes (1a-c) and Z,Z-tribenzodidehydro[12]annulenes (2a-c) by the reduction of the corresponding tribenzohexadehydro[12]annulenes 3a-c were carried out using a low valent titanium complex generated from Ti(O-i-Pr)₄ and i-PrMgCl. The unique structure of the first reduction products 2a-c as well as 1a-c was fully characterized. Complexation of these annulenes with silver(I) ions produces the corresponding silver complexes. Among them, the silver complexes of 2a-c exhibit interesting monomer-dimer equilibrium.     

Reactions of Mo(II)-tetraphosphine complex [MoCl2{meso-o-C6H4(PPhCH2CH2PPh2)2}] with a series of small molecules

Reactions of Mo(II)-tetraphosphine complex [MoCl₂(κ⁴-P4)] (2; P4 = meso-o-C₆H₄(PPhCH₂CH₂PPh₂)₂) with a series of small molecules have been investigated. Thus, treatment of 2 with alkynes RCCR′ (R = Ph, R′ = H; R = p-tolyl, R′ = H; R = Me, R′ = Ph) in benzene or toluene gave neutral mono(alkyne) complexes [MoCl₂(RCCR′)(κ³-P4)] containing tridentate P4 ligand, which were converted to cationic complexes [MoCl(RCCR′)(κ⁴-P4)]Cl having tetradentate P4 ligand upon dissolution into CDCl₃ or CD₂Cl₂. The latter complexes were available directly from the reactions of 2 with the alkynes in CH₂Cl₂. On the other hand, treatment of 2 with 1 equiv. of XyNC (Xy = 2,6-Me₂C₆H₃) afforded a seven-coordinate mono(isocyanide) complex [MoCl₂(XyNC)(κ⁴-P4)] (7), which reacted further with XyNC to give a cationic bis(isocyanide) complex [MoCl(XyNC)₂(κ⁴-P4)]Cl (8). From the reaction of 2 with CO, a mono(carbonyl) complex [MoCl₂(CO)(κ⁴-P4)] (9) was obtained as a sole isolable product. Reaction of 9 with XyNC afforded [MoCl(CO)(XyNC)(κ⁴-P4)]Cl (10a) having a pentagonal-bipyramidal geometry with axial CO and XyNC ligands, whereas that of 7 with CO resulted in the formation of a mixture of 10a and its isomer 10b containing axial CO and Cl ligands. Structures of 7 and 9 as well as [MoCl(XyNC)₂(κ⁴-P4)][PF₆](8′) and [MoCl(CO)(XyNC)(κ⁴-P4)][PF₆] (10a′) derived by the anion metathesis from 8 and 10a, respectively, were determined in detail by the X-ray crystallography.     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Supramolecular nanostructured assemblies of different types of porphyrins with fullerene using TiO2 nanoparticles for light energy conversion

TiO₂ nanoparticles were modified with porphyrin derivatives, 5-[4-benzoic acid]-10,15,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (Ar-H₂P-COOH), 5-[4-benzoic acid]-10,20-tris[3,5-di-tert-butylphenyl]-21H,23H-porphyrin (H-H₂P-COOH), and 5,10,15,20-tetra[4-benzoic acid]-21H,23H-porphyrin (H₂P-4COOH). The porphyrin-modified TiO₂ nanoparticles were deposited on nanostructured OTE/SnO₂ electrode together with nanoclusters of fullerene (C₆₀) in acetonitrile-toluene (3/1, v/v) using an electrophoretic deposition technique to afford the porphyrin-modified TiO₂ composite electrode denoted as OTE/SnO₂/(porphyrin-modified TiO₂ nanoparticle+C₆₀)_n. The porphyrin-modified TiO₂ composite electrodes have efficient light absorbing properties in the visible region, exhibiting the photoactive response under visible light excitation using redox couple. The incident photon-to-photocurrent efficiency (IPCE) values of supramolecular nanostructured electrodes of porphyrin-modified TiO₂ nanoparticles with fullerene [OTE/SnO₂/(Ar-H₂P-COO-TiO₂+C₆₀)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂+C₆₀)_n] are much larger than those of the reference systems of porphyrin-modified TiO₂ nanoparticles without C₆₀ [OTE/SnO₂/(Ar-H₂P-COO-TiO₂)_n, OTE/SnO₂/(H-H₂P-COO-TiO₂)_n, and OTE/SnO₂/(H₂P-4COO-TiO₂)_n]. In particular, the maximum IPCE value (41%) is obtained for OTE/SnO₂/(H-H₂P-COO-TiO₂+C₆₀)_n under the bias potential of 0.2 V versus SCE. This indicates that the formation of supramolecular complexes between porphyrins and fullerene on TiO₂ nanoparticles plays an important role in improvement of the light energy conversion properties.     

Synthesis of benzamide-C-ribonucleosides by Pd-catalyzed aminocarbonylations

A novel modular, efficient and practical methodology for preparation of p- and m-substituted benzamide-C-ribonucleosides was developed. Reaction of TBS-protected 3- and 4-bromophenyl-C-ribonucleosides 1 and 4 with various primary and secondary amines or NH₄Cl under atmospheric pressure of carbon monoxide and in the presence of Pd(OAc)₂ and Xantphos lead to the corresponding amides 2a-j and 5a-j in high yields. Subsequent deprotection of silylated nucleosides by Et₃N·3HF or TFA afforded a series of free C-ribonucleosides 3a-j or 6a-j in excellent yields (20 examples).     

Synthesis of l-azaisotryptophan and its analogs: a general access to new 2-substituted azaindoles

l-(N-Cbz)-7-azaisotryptophan, l-(N-Cbz)-1a, a new isostere of tryptophan, was synthesized by reacting Li₂-(N-Boc)-2-amino-3-picoline, Li₂-(N-Boc)-2a, with appropriately protected l-aspartic acid followed by simple functional group manipulation. This synthetic success led us to access a set of analogs of azaisotryptophan (4a–c; 6a–c) as well as a new class of chiral amines (7a–c; 8a–c) for future application in asymmetric synthesis and design of homochiral ligands. Further, we have generalized the method substantiating a variety of new azaindol-2-yl derivatives (10aa–10lc) with functionalized substituents. In a preliminary luminescence characterization, l-(N-Cbz)-1a has exhibited about 30 nm bathochromic shifted fluorescence emission compared to tryptophan and (N-Cbz)-tryptophan.     

Unexpected conversion of a polycyclic thiophene to a macrocyclic anhydride

Oxygenation of 2,5,9,12-tetra(tert-butyl)diacenaphtho[1,2-b:1′,2′-d]-thiophene (1, C₄₀H₄₄S) by peracids gave the cyclic sulfonic ester 4 (2,7,10,13-tetra(tert-butyl)diacenaphtho[1,2-c:1′,2′-e]oxathiin 5,5-dioxide, C₄₀H₄₄O₃S) which, when heated in nitrobenzene, is converted into a complex, macrocyclic anhydride 3 (C₈₀H₈₈O₃), which is derived from two molecules of 4. Further investigation found a likely intermediate in this reaction, 4,4′,7,7′-tetra(tert-butyl)-1,1′-biacenaphthylenylidene-2,2′-dione (5, C₄₀H₄₄O₂), apparently formed from 4 by additional oxidation. Anhydride 3 plausibly arises by Diels-Alder reaction of 4 and 5 followed by several ring fragmentations. The structures of 3, 4, and 5 were unambiguously established by X-ray crystallography.     

Synthesis and reactivity of para-substituted benzoylmethyltellurium(II and IV) compounds: observation of intermolecular C-H-O hydrogen bonding in the crystal structure of (p-MeOC6H4COCH2)2TeBr2

Bis(p-substituted benzoylmethyl)tellurium dibromides, (p-YC₆H₄COCH₂)₂TeBr₂, (Y=H (1a), Me (1b), MeO (1c)) can be prepared either by direct insertion of elemental Te across C_Rf-Br bonds (where C_Rf refers to α-carbon of a functionalized organic moiety) or by the oxidative addition of bromine to (p-YC₆H₄COCH₂)₂Te (Y=H (2a), Me (2b), MeO (2c)). Bis(p-substituted benzoylmethyl)tellurium dichlorides, (p-YC₆H₄COCH₂)₂TeCl₂ (Y=H (3a), Me (3b), MeO (3c)), are prepared by the reaction of the bis(p-substituted benzoylmethyl)tellurides 2a-c with SO₂Cl₂, whereas the corresponding diiodides (p-YC₆H₄COCH₂)₂TeI₂ (Y=H (4a), Me (4b), MeO (4c)) can be obtained by the metathetical reaction of 1a-c with KI, or alternatively, by the oxidative addition of iodine to 2a-c. The reaction of 2a-c with allyl bromide affords the diorganotellurium dibromides 1a-c, rather than the expected triorganotelluronium bromides. Compounds 1-4 were characterized by elemental analyses, IR spectroscopy, ¹H, ¹³C and ¹²⁵Te NMR spectroscopy (solution and solid-state) and in case of 1c also by X-ray crystallography. (p-MeOC₆H₄COCH₂)₂TeBr₂ (1c) provides, a rare example, among organotellurium compounds, of a supramolecular architecture, where C-H-O hydrogen bonds appear to be the non-covalent intermolecular associative force that dominates the crystal packing.     

A highly stereoselective preparation of CF3-substituted 1-aryl-1,2-diphenylethenes: application to the synthesis of panomifene

β-CF₃-α,β-diphenylvinyl sulfide 3a was prepared stereoselectively in 77% yield from the reaction of 2 with phenyllithium at room temperature for 5 h. Oxidation of 3a with MCPBA afforded the corresponding vinyl sulfone 4a, in which (E)-4a can be crystallized in a mixture of CH₂Cl₂ and hexane. The addition-elimination reaction of (E)-4a with phenyllithium having substituents on the benzene ring provided 5a-j in 51-82% yields stereospecifically. Similarly, the treatment of (E)-4a with p-chloroethoxyphenyllithium in the presence of 12-crown-4 (20 mol %) at −10 °C, followed by slowly warming to room temperature, resulted in the formation of the corresponding panomifene precursor 6 in 82% yield.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

Syntheses of rac/meso-{PhP(3-t-Bu-C5H3)2}-Zr{RN(CH2)3NR}, structural analyses of rac-{PhP(3-t-Bu-C5H3)2}Zr{RN(CH2)3NR} (where R is SiMe3 or Ph), and meso to rac isomerization

Syntheses of rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{Me₃SiN(CH₂)₃NSiMe₃} (rac-3/meso-3) and rac/meso-{PhP(3-t-Bu-C₅H₃)₂}Zr{PhN(CH₂)₃NPh} (rac-4/meso-4) were achieved by metallation of K₂[PhP(3-t-Bu-C₅H₃)₂] · 1.3 THF (2) with Zr{RN(CH₂)₃NR}Cl₂(THF)₂ (where R = SiMe₃ or Ph, respectively) using ethereal solvent. These isomeric pairs were characterized by ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy; rac-3 and rac-4 were also examined via single crystal X-ray crystallography. The structures of rac-3 and rac-4 are notable in the tendency of the cyclopentadienyl rings towards η³ coordination. While isolated samples of rac-3/meso-3 and rac-4/meso-4 slowly isomerize in tetrahydrofuran-d₈ to equilibrium ratios, the isomerization rate for 3 is more than 15-fold greater than that for 4. In addition, equilibrium ratios are rapidly reached when isolated samples of rac-3/meso-3 and rac-4/meso-4 are exposed to tetrabutylammonium chloride in tetrahydrofuran-d₈ solvent. We propose that a nucleophile (either chloride or the phosphine interannular linker) brings about dissociation of one cyclopentadienyl ring, thus promoting the rac/meso isomerization mechanism.     

Agelasines O-U, new diterpene alkaloids with a 9-N-methyladenine unit from a marine sponge Agelas sp.

New diterpene alkaloids, agelasines O-U (1-7), have been isolated from an Okinawan marine sponge Agelas sp. The gloss structures and relative stereochemistries of 1-7 were elucidated from the spectroscopic data. Agelasines O-R (1-4) were the third examples of diterpene alkaloid with a 9-N-methyladenine and a pyrrole units. Agelasine O (1) has a halimane skeleton, while agelasines P-R (2-4) have a clerodane skeleton. Agelasines S-U (5-7) were new diterpene alkaloids with a 9-N-methyladenine unit consisting of a halimane skeleton, a labdane skeleton, and a clerodane skeleton, respectively. Agelasines O-R (1-4) and T (6) showed antimicrobial activities against several bacteria and fungi.     

Novel photo-induced oxidative cyclization of 1,3-dimethyl-5-(1-arylmethylidene)pyrimidine-2,4,6(1,3,5H)-triones: synthesis and properties of areno[5,6]pyrano[2,3-d]pyrimidine-2,4(1,3H)-dionylium ions and their photo-induced autorecycling oxidizing reaction toward some amines

Novel photo-induced oxidative cyclization was accomplished to synthesize areno[b]pyrimido[5,4-e]pyran-2,4(1,3H)-dionylium ions 13a-c⁺·ClO₄⁻. Furthermore, 13a-c⁺·BF₄⁻ and their phenyl-substituted derivatives 19a,b⁺·BF₄⁻ were alternatively synthesized by the reaction of salicylaldehyde and its naphthyl derivatives with barbituric acids and subsequent treatment with aq. HBF₄. Structural characteristics of 13a-c⁺ and 19a,b⁺ were clarified on inspection of the UV-vis and NMR spectral data as well as X-ray crystal analyses. The electrochemical properties were studied by the CV measurement. In a search for reactivity, reactions of 13a-c⁺·BF₄⁻ with some nucleophiles, hydride, benzylamine, and H₂O, were also carried out. The photo-induced autorecycling oxidation reactions of 13a-c⁺·BF₄⁻ toward some amines under aerobic conditions were carried out to give the corresponding imines (isolated by converting to the corresponding 2,4-dinitrophenylhydrazones) in 643-3600% yield (recycling number of 13a-c⁺·BF₄⁻: 6.4-36.0).     

Synthesis and characterization of titanium alkyl, oxo, and diene complexes bearing a SiMe2-bridged phenoxy-cyclopentadienyl ligand and their catalytic performance for copolymerization of ethylene and 1-hexene

A series of titanium complexes bearing a SiMe₂-bridged phenoxy-cyclopentadienyl ligand were synthesized and characterized, and their catalytic behavior for copolymerization of ethylene and 1-hexene was investigated. Treatment of dimethylsilyl(2,3,4,5-tetramethylcyclopentadienyl)(3-tert-butyl-5-methyl-2-phenoxy)-titanium dichloride (1) with appropriate nucleophiles afforded dimethoxy complex 2, dimethyl complex 3, and dibenzyl complex 4. Standing a toluene solution of 2 in air afforded a dinuclear μ-oxo complex 5 as a single isomer. 1,3-Diene complexes 6-8 were prepared by reaction of 1 with the corresponding 1,3-dienes in the presence of 2 equiv. of n-BuLi. X-ray analysis of 1,4-diphenyl-1,3-butadiene complex 6 revealed that the diene ligand coordinates to titanium in s-cis fashion with a prone orientation. The newly prepared titanium complexes were applied to copolymerization of ethylene and 1-hexene upon activation with AlⁱBu₃ and [C₆H₅NMe₂H][B(C₆F₅)₄]. It was found that the alkyl complexes 3-4 and the diene complexes 6-8 showed higher activities than 1 at elevated temperature.     

Synthesis of 5-endo-, 5-exo-, 6-endo- and 6-exo-hydroxylated analogues of epibatidine

A convenient, high-yield synthesis of N-Boc-7-azabicyclo[2.2.1]hept-5-en-2-one (7) was developed by SmI₂-mediated desulfonylation of 6. Thus, 5-endo-, 5-exo-, 6-endo-, and 6-exo-hydroxylated epibatidine analogues 2a,b and 3a,b were synthesized from 7 by using a Pd(PPh₃)₄-catalyzed reductive Heck coupling reaction and SmI₂-mediated reduction of the carbonyl group as the key steps. Other reaction conditions for the reductive Heck procedure and the reduction step were also investigated.     

Synthesis of polylactide using a zinc complex containing (S)-N-ethyl-N-phenyl-2-pyrrolidinemethanamine

The reaction between ZnCl₂ and (S)-N-ethyl-N-phenyl-2-pyrrolidinemethanamine (S-EPP) as a chiral ligand affords [ZnCl₂(S-EPP)], whose structure has been determined by X-ray crystallography. [ZnEt₂(S-EPP)] has demonstrated high activity toward the polymerization of rac-lactide with a maximum turnover frequency (TOF) of 121. Despite the intended stereocontrol by employing a chiral ligand, however, the observed heterotacticity was limited to under 0.6. The MWDs of the PLAs were found to be modulated by changing the solvent or controlling the concentration of the monomer in the solution. The glass transition temperature (T_g) was critically dependent on the MW within the narrow MWD regime, but the dependence became significantly shallow when the MWD was broadened.     

Naphthyridines. Part 3: First example of the polyfunctionally substituted 1,2,4-triazolo[1,5-g][1,6]naphthyridines ring system

Treatment of 1,2,4-triazoles (1) with diethylmalonate in bromobenzene gave 1,2,4-triazolo-[1,5-a]pyridines 2. Chlorination of 2 using POCl₃/DMF (Vilsmeier reagent) led to the isolation of 7-chloro-6-formyl-1,2,4-triazolo[1,5-a]pyridine derivative 4, which reacted with the stabilized ylid 5 to afford 6-ethoxycarbonylvinyl-1,2,4-triazolo[1,5-a]-pyridines 6. Azidation of 6 yielded the corresponding azido compound 7, (Scheme 2). Reduction of 7 with Na₂S₂O₄ gave the corresponding 7-amino compound 8, which cyclized in boiling DMF to give the novel 1,2,4-triazolo[1,5-g][1,6]naphthyridines 9. On the other hand, reacting 7 with one equivalent of PPh₃ (aza-Wittig reaction) in CH₂Cl₂ gave 7-imino-phosphorane derivative 10, and subsequent cyclization in boiling DMF afforded the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 11 (Scheme 3). However, treatment of 10 with phenyl isothiocyanate in 1,2-dichlorobenzene at reflux temperature gave the new 1,2,4-triazolo[1,5-g][1,6]naphthyridine derivative 14 (Scheme 4). Refluxing 6 with excess of a primary amines 15a,b in absolute. EtOH yielded the corresponding 7-alkyl-amino-1,2,4-triazolo[1,5-a]pyridines 16a,b. These obtained amines 16a,b underwent intramolecular heterocyclization in boiling DMF to give the novel 9-alkyl-1,2,4-triazolo[1,5-g][1,6]-naphthyridines 17a,b, in excellent yields (Scheme 5).