Reinvestigation of the stereochemistry of kulokekahilide-2

An attempt to carry out a total synthesis of kulokekahilide-2 (1) by macrolactonization of a seco acid prepared from a suitably protected hexapeptide and a dioxy acid moiety unexpectedly resulted in the formation of the 43-epimer (1a) of the cytotoxic depsipeptide, for which structure 1b has previously been proposed. A second attempt involving macrolactamization of the corresponding amino acid gave the target product, 1b, but the spectral data of the product did not match those of natural 1. Furthermore, neither 1a nor 1b showed any cytotoxicity, from which it is concluded that the structure of natural 1 is incorrect and should be re-examined.     

2-(1-Isopropyl-2-benzimidazolyl)-6-(1-aryliminoethyl)pyridyl transition metal (Fe, Co, and Ni) dichlorides: Syntheses, characterizations and their catalytic behaviors toward ethylene reactivity

A series of 2-(1-isopropyl-2-benzimidazolyl)-6-(1-aryliminoethyl)pyridyl metal complexes [iron (II) (1a-6a), cobalt (II) (1b-6b) and nickel (II) (1c-6c)] were synthesized and fully characterized by elemental and spectroscopic analyses. Single-crystal X-ray diffraction analyses of five coordinated complexes 5a, 3b, 5b, 1c and 2c reveal 5a and 5b as distorted trigonal-bipyramidal geometry, and 3b, 1c and 2c as distorted square pyramidal geometry. All complexes performed ethylene reactivity with the assistance of various organoaluminums. The iron complexes displayed good activities in the presence of MAO and MMAO. Upon activated by Et₂AlCl, the cobalt analogues showed moderate ethylene reactivity, while the nickel analogues exhibited relatively higher activities.     

1,1,3,3,3-Pentafluoro-2-pentafluorophenyl-1,2-epoxypropane and trimethylphosphite: unusual 1,4-dioxan-2,5-dione ring formation

1,1,3,3,3-Pentafluoro-2-pentafluorophenyl-1,2-epoxypropane 1 reacted with trimethylphosphite giving two diastereomers, (Z)- and (E)-3,6-bis(trifluoromethyl)-3,6-bis(pentafluorophenyl)-1,4-dioxan-2,5-dione 2a, b in a 1:1 ratio, cyclodimerisation product of the intermediately generated α-lactone 4. Compounds 2a, b were hydrolysed to furnish 3,3,3-trifluoro-2-hydroxy-2-(2,3,4,5,6-pentafluorophenyl)propionic acid 5.     

Synthesis,spectral characterization,properties and structures of copper(I) complexes containing novel bidentate iminopyridine ligands

Four new ligands, (4-methyl-phenyl)-pyridin-2-ylmethylene-amine (A), (2,3-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (B), (2,4-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (C) and (2,5-dimethyl-phenyl)-pyridin-2-ylmethylene-amine (D), and their corresponding copper(I) complexes, [Cu(A)₂]ClO₄ (1a), [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c), [Cu(D)₂]ClO₄ (1d), [Cu(A)(PPh₃)₂]ClO₄ (2a), [Cu(B)(PPh₃)₂]ClO₄ (2b), [Cu(C)(PPh₃)₂]ClO₄ (2c) and [Cu(D)(PPh₃)₂]ClO₄ (2d), have been synthesized and characterized by CHN analyses, ¹H and ¹³C NMR, IR and UV–Vis spectroscopy. The crystal structures of [Cu(B)₂]ClO₄ (1b), [Cu(C)₂]ClO₄ (1c) and [Cu(A)(PPh₃)₂]ClO₄ · 1/2CH₃CN (2a) were determined from single crystal X-ray diffraction. The coordination polyhedron about the copper(I) center in the three complexes is best described as a distorted tetrahedron. A quasireversible redox behavior is observed for the complexes.     

The conversion of 2-cyano cyanothioformanilides into 3-aminoindole-2-carbonitriles using triphenylphosphine

2-Cyano cyanothioformanilide 3a reacts with triphenylphosphine in the presence of water to give 2-(cyanomethyleneamino)benzonitrile 4a, 2-(cyanomethylamino)benzonitrile 5, 3-aminoindole-2-carbonitrile 2a and (2-cyanoindol-3-yl)iminotriphenylphosphorane 6a. In the presence of p-toluenesulfonic acid in MeOH the reaction between 2-cyano cyanothioformanilide 3a and triphenylphosphine (2 equiv) gives 3-aminoindole-2-carbonitrile 2a in 90% yield. Under the same conditions 2-(cyanomethyleneamino)benzonitrile 4a gives anthranilonitrile 8a, 3-aminoindole-2-carbonitrile 2a and N-(2-cyanophenyl)formamide 9. In addition, substituted 2-cyano cyanothioformanilides 3b-f react with triphenylphosphine and p-toluenesulfonic acid in MeOH to give 3-aminoindole-2-carbonitriles 2b-f in 63-75% yields. Under analogous conditions 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 2g gives only 4,5-dimethoxyanthranilonitrile 8g and 4,6,7-trimethoxyquinazoline-2-carbonitrile 14g, but in refluxing dry PhMe in the absence of p-toluenesulfonic acid 2-cyano-4,5-dimethoxyphenyl cyanothioformanilide 3g, (2-cyano-5,6-dimethoxyindol-3-yl)iminotriphenylphosphorane 6g and 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g are obtained. The structure of 2-(cyanomethyleneamino)-4,5-dimethoxybenzonitrile 4g is supported unambiguously via independent synthesis and comparison to the isomeric 6,7-dimethoxyquinazoline-2-carbonitrile 15. All new compounds are fully characterised and a tentative mechanism for the transformation of 2-cyano cyanothioformanilides to indoles is proposed.     

An efficient one-pot construction of substituted pyrimidinones

A concise, scaleable synthesis of building block 10 for p38 kinase inhibitor B is described. The key step is the one-pot construction of 5-aryl-3-methyl-2-methylsulfanyl-6-pyridin-4-yl-3H-pyrimidin-4-one 4 from arylacetic acid ethyl ester 1. Subsequent hydrolysis of the thiomethyl group to the hydroxy group and chlorination provided the key intermediate, 2-chloro-3-methyl-6-pyridin-4-yl-5-aryl-3H-pyrimidin-4-one 10. This class of reactive building blocks enabled the rapid evaluation of a variety of side chains at the 2-position of the pyrimidinone in SAR studies of inhibitors of p38 MAP kinase.     

Cycloaddition of methyl 2-(2,6-dichorophenyl)-2H-azirine-3-carboxylate to electron-rich 2-azadienes

tert-Butyldimethylsililoxy-2-aza-1,3-butadienes react with 2H-azirine 3 leading to Diels-Alder cycloadducts in moderate yields. The reactions are endo- and regioselective with the azirine being added by its less hindered face. There is only one product in the case of 1b, 4b. There are two isomers (4 and 5) from 1a, 1c and 1d. A different result was obtained with the diene 1e. Diene 1e formed products 4e and 8. Some of compounds 4 and 5 have been hydrolysed leading to functionalised aziridines 7. Compound 8 gave aziridine 9.     

Synthesis of polyfunctionalized furans from 3-acetyl-1-aryl-2-pentene-1,4-diones

The BF₃-catalyzed cyclization of 3-acetyl-1-aryl-2-pentene-1,4-diones 1a-e in the presence of water in boiling tetrahydrofuran gave bis(3-acetyl-5-aryl-2-furyl)methanes 2a-e in 26-79% yields along with a small amount of 3-acetyl-5-aryl-2-methylfurans 3a-e. The exact structure of 2a was determined by X-ray crystallography. The use of a half volume of the solvent for the reaction of 1a resulted in the formation of 2,4-bis(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-phenylfuran (4) together with 2a and 3a. A similar reaction of 1a was carried out in the presence of 3-acetyl-5-(4-methylphenyl)-2-methylfuran (3d) to afford 4-(3-acetyl-5-phenyl-2-furfuryl)-3-acetyl-5-(4-methylphenyl)-2-methylfuran (5) in 49% yield. The BF₃-catalyzed reaction of 1a with 2,4-pentanedione in dry tetrahydrofuran at 23°C gave 3-(3-acetyl-5-phenyl-2-furfuryl)-4-hydroxy-3-penten-2-one (6a) and 3-(3-acetyl-2-methyl-4-phenyl-5-furyl)-4-hydroxy-3-penten-2-one (7a) in 66 and 24% yields, respectively. The product distribution depended on the reaction temperature. A similar reaction of 1b-e also yielded the corresponding trisubstituted furans 6b-e and tetrasubstituted furans 7b-e in good yields. These results suggested the presence of the furfuryl carbocation intermediate A during the reaction. The one-pot synthesis of 6a and 7a was also achieved by a similar reaction using phenylglyoxal. The deoxygenation of 1a with triphenylphosphine gave 3a in 88% yield, while 1a was treated with concentrated hydrochloric acid to yield 3-acetyl-2-chloromethyl-5-phenylfuran (8) which was quantitatively transformed in ethanol into 3-acetyl-2-ethoxymethyl-5-phenylfuran (9) and in water into 3-acetyl-5-phenylfurfuryl alcohol (10), respectively. In addition, the Diels-Alder reaction of cyclopantadiene with 1a gave the corresponding [4+2] cycloaddition products 11 and 12.     

Solid-phase synthesis of core 2 O-linked glycopeptide and its enzymatic sialylation

The core 2-type tetrasaccharide building blocks (1a/1b) for solid-phase synthesis of glycopeptide were synthesized via stereoselective glycosylation of the disaccharyl Ser/Thr (3a/3b) with a glycosyl fluoride (2) carrying the 2-trichloroacetamido group that was readily converted into a 2-acetamido group by reduction. A segment of glycoprotein leukosialin (215-224) was synthesized by the solid-phase protocol, the building block (1b) being utilized. Cleavage of the synthetic glycopeptide from resin was effected with reagent K and subsequent treatment of the product with a cocktail for the ‘low-acidity TfOH’ facilitated complete removal of the benzyl groups with minimum loss of glycosidic linkages. To the deprotected glycopeptide (21), were enzymatically introduced N-acetylneuraminic acid (sialic acid) residues in remarkably high efficiency by using the specific sialyltransferases.     

The reaction of 4-amino-2-oxazolines with isocyanates and isothiocyanates. Synthesis and X-ray structures of polysubstituted 2-imidazolidinones, 1,3-oxazolidines and 1,3-thiazolidines

Reactions of 4-alkylamino-2-phenyl-2-oxazolines 1 with isocyanates and isothiocyanates provide unprecedented efficient and regioselective heterocycle-heterocycle transformations. Compounds 1 reacted rapidly with tosyl isocyanate yielding directly 3-alkyl-4-benzamido-1-tosyl-2-imidazolidinones 4 in almost quantitative yields. The corresponding ureido intermediates 2 were not isolable species. However, the reactions with non-sulfonylated isocyanates or isothiocyanates were slower, leading to the expected ureido and thioureido derivatives 5, which were easily and efficiently transformed to either polysubstituted 2-imino-1,3-oxazolidine or 2-imino-1,3-thiazolidine hydrochlorides 7, respectively, by treatment with hydrochloric acid. The possible reasons for this disparity in chemical behaviour are discussed. X-ray crystallographic structures for 4-benzamido-3-methyl-1-tosyl-2-imidazolidinone 4b, 4-[1-isopropyl-3-(4-nitrophenyl)ureido]-2-phenyl-2-oxazoline 5e, (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-oxazolidine hydrochloride 7a and (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-thiazolidine hydrochloride 7b have been determined.     

Click reactions of 2H-azaphosphirene chromium and molybdenum complexes and a surprisingly facile access to a 2H-1,4,2-diazaphosphole derivative

Ring expansion reactions of 2H-azaphosphirene chromium and molybdenum complexes 1a,b with dimethyl cyanamide, triflic acid, and, subsequently at ambient temperature, with triethylamine gave a mixture of the respective 2H-1,4,2-diazaphosphole complex 2a,b and the non-ligated heterocycle 3. If the deprotonation with NEt₃ was carried out at low temperature, the selective formation of complexes 2a,b was observed, which were isolated in excellent yields and fully characterized (including single-crystal X-ray crystallography). Experimental and computational results revealed that the P, Cr and P, Mo bonds of 2H-1,4,2-diazaphosphole complexes are significantly weakened upon N-protonation of the heterocyclic ligand. When mixtures of 1a,b, TfOH, and Me₂NCN were warmed to ambient temperature, the primarily formed N-protonated of 2H-1,4,2-diazaphosphole complexes 4a,b could be observed by ³¹P NMR spectroscopy. The latter underwent decomplexation to give the N-protonated free ligand 5, which could be isolated and characterized by multinuclear NMR experiments. The neutral non-ligated heterocycle 3 was isolated from a one-pot reaction of 1b with TfOH and Me₂NCN by adding NEt₃ to a solution of intermediately formed 5.     

[4+2] Cycloaddition reactions of 4-sulfur-substituted 2-pyridones with electron-deficient dienophiles

[4+2] Cycloaddition reactions of 4-(phenylthio)-1-tosyl-2-pyridone (6a) and 4-(phenylsulfonyl)-1-tosyl-2-pyridone (6b) with electron-deficient dienophiles 7 (N-methylmaleimide, N-phenylmaleimide, and methyl acrylate) gave new isoquinuclidine products 8-10. The N-tosyl group of 6a and 6b was also efficiently converted to N-alkyl derivatives 6c-f, which showed different stereoselectivity toward reactions with dienophiles 7. Several other dienophiles 15 (dimethyl acetylenedicarboxylate, methyl vinyl ketone, ethyl vinyl ether, and methyl methacrylate) were found not to react with 6a or 6b, but led to the formation of tosyl migration products 4-(phenylthio)-O-tosyl-pyridinol (16a) and 4-(phenylsulfonyl)-O-tosyl-2-pyridinol (16b), respectively. The reactivity, regioselectivity, and stereoselectivity of the cycloaddition reactions were also compared with semi-empirical calculations.     

Formation of new 4-isocyanobut-2-enenitriles by thermal ring cleavage of 3-pyridyl azides

A new thermal ring cleavage of 3-pyridyl nitrenes for the formation of 4-isocyanobut-2-enenitrile products is reported. Thermolysis of 4-(thien-3-yl)-3-pyridyl azide 1 and 3-azido-4-(1-TIPS-1H-pyrrol-3-yl)pyridine 5 afforded two new isonitrile-nitrile products by ring cleavage; 4-isocyano-2-(thiophen-3-yl)but-2-enenitrile (3, 27%) and 4-isocyano-2-(1-TIPS-1H-pyrrol-3-yl)but-2-enenitrile (7, 20%), in addition to our previously reported pyrido[3,4-b]thienopyrrole (2, 29%) and pyrido[3,4-b]pyrrolo[3,2-d]pyrrole (6, 71%) products. Minor amounts of 2-(thien-3-yl)-1H-pyrrole-3-carbonitrile (4, 6%), formed by ring contraction, were also isolated after thermolysis of azide 1. Isonitriles 3 and 7 underwent degradation into amine 3b and formamide 7a by acidic hydrolysis. The nature and chemistry of compounds 3, 4 and 7 were investigated.     

Microwave-assisted synthesis of novel bis(2-thioxothiazolidin-4-one) derivatives as potential GSK-3 inhibitors

(5Z,5′Z)-3,3′-(1,4-Phenylenebis(methylene)-bis-(5-arylidene-2-thioxothiazolidin-4-one) derivatives (5a-r) have been synthesized by the condensation reaction of 3,3′-(1,4- or 1,3-phenylenebis(methylene))bis(2-thioxothiazolidin-4-ones) (3a,b) with suitably substituted aldehydes (4a-f) or 2-(1H-indol-3-yl)2-oxoacetaldehydes (8a-c) under microwave conditions. The bis(2-thioxothiazolidin-4-ones) were prepared from the corresponding primary alkyl amines (1a,b) and di-(carboxymethyl)-trithiocarbonyl (2). The 2-(1H-indol-3-yl)-2-oxoacetaldehydes (8a-c) were synthesized from the corresponding acid chlorides (7a-c) using HSnBu₃.     

New 2-functionalized 2H-3,4-dihydro-1,4-benzothiazin-3-ones and their application in the synthesis of spiro heterocycles

The reaction of 2-chloro-3,4-dihydro-2H-1,4-benzothiazin-3-ones 1 with enamines is an efficient synthetic method to produce 2-substituted derivatives. The resulting bifunctional compounds such as 6a,b, 7c,d and 8b react with hydrazines to furnish the spiro derivatives of N-aminopyrrole or 3-pyridazinone depending on the direction of the primary nucleophilic attack and the nature of the nucleophile. Under the reaction conditions, spiro pyridazinones 13 are converted into the 3-pyridazinone-4-carboxylic acid derivatives 9 via the 1,4-thiazine ring opening.     

The regioselectivity of the formation of 2-pyrazolylthiazoles and their precursors from the reaction of 2-hydrazinothiazoles with 4,4,4-trifluoro-1-hetaryl-1,3-butanediones

Reaction of 2-hydrazinothiazoles 1 with 1-thienyl- and 1-furyl-1,3-butanediones 2a,b in methanol in the presence of hydrochloric acid mainly leads to a mixture of pyrazoles 3 and pyrazolines 4 or pyrazoles 3 and 5 in strong acidic conditions. Isomeric hydrazones 6 and pyrazolines 4 were formed and isolated in these reactions in the absence of hydrochloric acid. It has been shown that the regioselectivity in the reaction of diketones 2 with hydrazine 1 is governed by both the concentration of acid and the nature of substituents in the 1,3-diketones 2. Cyclization of hydrazones 6 is shown to occur under milder conditions than dehydration for pyrazolines 4. The new heterocyclic compounds were prepared and fully characterized by NMR spectra and by X-ray analysis for 3c.     

Bioactive meroditerpenes and indole alkaloids from the soil fungus Neosartorya fischeri (KUFC 6344), and the marine-derived fungi Neosartorya laciniosa (KUFC 7896) and Neosartorya tsunodae (KUFC 9213)

Two new metabolites including a new aszonalenin analogue (1c) and a new meroditerpene (3) were isolated, together with aszonalenin (1a), acetylaszonalenin (1b), 13-oxofumitremorgin B (2), aszonapyrone A (4b) and helvolic acid, from the culture of the soil fungus Neosartorya fischeri (KUFC 6344). While the ethyl acetate extract of the culture of the diseased coral-derived fungus Neosartorya laciniosa (KUFC 7896) furnished aszonapyrone B (4a), aszonapyrone A (4b), tryptoquivaline L and 3′-(4-oxoquinazolin-3-yl) spiro[1H-indole-3,5′-oxolane]-2,2′-dione, the ethyl acetate extract of the culture of the marine sponge-associated fungus Neosartorya tsunodae (KUFC 9213) yielded a new analogue of chevalone C (5) and helvolic acid. The structures of the new compounds were established based on 1D and 2D NMR spectral analysis as well as HR-ESIMS. Compounds 1a–c, 2, 3, 4a, 4b and 5 were evaluated for their in vitro growth inhibitory activity on the MCF-7 (breast adenocarcinoma), NCI-H460 (non-small cell lung cancer) and A375-C5 (melanoma) cell lines by the protein binding dye SRB method.     

Reactions of azulenes with 1,2-diaryl-1,2-ethanediols in methanol in the presence of hydrochloric acid: comparative studies on products, crystal structures, and spectroscopic and electrochemical properties

Although reaction of guaiazulene (1a) with 1,2-diphenyl-1,2-ethanediol (2a) in methanol in the presence of hydrochloric acid at 60 °C for 3 h under aerobic conditions gives no product, reaction of 1a with 1,2-bis(4-methoxyphenyl)-1,2-ethanediol (2b) under the same reaction conditions as 2a gives a new ethylene derivative, 2-(3-guaiazulenyl)-1,1-bis(4-methoxyphenyl)ethylene (3), in 97% yield. Similarly, reaction of methyl azulene-1-carboxylate (1b) with 2b under the same reaction conditions as 1a gives no product; however, reactions of 1-chloroazulene (1c) and the parent azulene (1d) with 2b under the same reaction conditions as 1a give 2-[3-(1-chloroazulenyl)]-1,1-bis(4-methoxyphenyl)ethylene (4) (81% yield) and 2-azulenyl-1,1-bis(4-methoxyphenyl)ethylene (5) (15% yield), respectively. Along with the above reactions, reactions of 1a with 1,2-bis(4-hydroxyphenyl)-1,2-ethanediol (2c) and 1-[4-(dimethylamino)phenyl]-2-phenyl-1,2-ethanediol (2d) under the same reaction conditions as 2b give 2-(3-guaiazulenyl)-1,1-bis(4-hydroxyphenyl)ethylene (6) (73% yield) and (Z)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1-phenylethylene (7) (17% yield), respectively. Comparative studies of the above reaction products and their yields, crystal structures, spectroscopic and electrochemical properties are reported and, further, a plausible reaction pathway for the formation of the products 3-7 is described.     

3-Amino- and 3-acylamido-2-phosphonopyridines: synthesis by Pd-catalyzed P-C coupling, structure and conversion to pyrido[b]-anellated PC-N heterocycles

Palladium catalyzed cross-coupling of 3-amino- and 3-acylamido-2-bromopyridines 1a-f with triethyl phosphite allowed the synthesis of 3-amino- and 3-acylamido pyridine-2-phosphonic acid diethyl esters 2a-f, whereas nickel catalysts, although providing access to related anilido-2-phosphonates, proved inactive. Reduction of the aminophosphonate 2a with LiAlH₄ afforded 3-amino-2-phosphinopyridine (3a), which was cyclocondensed with dimethylformamide dimethyl acetal (DMFA) via phosphaalkene intermediates 4a to the novel pyrido[b]-anellated 1,3-azaphosphole 5a. Reaction of amidophosphonates 2b-f with LiAlH₄ did not result in the expected reductive cyclization, as shown by closely related anilido-2-phosphonates, but led to product mixtures containing N-secondary 3-amino-2-phosphinopyridines 3b-f as the main or major component. The conversion of 3b,d,e with DMFA to 5b,d,e provides first examples of N-substituted pyrido[b]-anellated azaphospholes. Structures were confirmed by multinuclear NMR and X-ray crystallography (for 2c, 3b).     

Fe Spin crossover materials based on dissymmetrical N4 Schiff bases including 2-pyridyl and 2R-imidazol-4-yl rings: Synthesis,crystal structure and magnetic and Mössbauer properties

The synthesis and characterization of new symmetrical Fe^II complexes, [FeL^A(NCS)₂] (1), and [FeL^Bx(NCS)₂] (2–4), are reported (L^A is the tetradentate Schiff base N,N′-bis(1-pyridin-2-ylethylidene)-2,2-dimethylpropane-1,3-diamine, and L^Bx stands for the family of tetradentate Schiff bases N,N′-bis[(2-R-1H-imidazol-4-yl)methylene]-2,2-dimethylpropane-1,3-diamine, with: R = H for L^B1 in 2, R = Me for L^B2 in 3, and R = Ph for L^B3 in 4). Single-crystal X-ray structures have been determined for 1 (low-spin state at 293 K), 2 (high-spin (HS) state at 200 K), and 3 (HS state at 180 K). These complexes remain in the same spin-state over the whole temperature range [80–400 K]. The dissymmetrical tetradentate Schiff base ligands L^Cx, N-[(2-R₂-1H-imidazol-4-yl)methylene]-N′-(1-pyridin-2-ylethylidene)-2,2-R₁-propane-1,3-diamine (R₁ = H, Me; R₂ = H, Me, Ph), containing both pyridine and imidazole rings were obtained as their [FeL^Cx(NCS)₂] complexes, 5–10, through reaction of the isolated aminal type ligands 2-methyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = H, 5–7) or 2,5,5-trimethyl-2-pyridin-2-ylhexahydropyrimidine (R₁ = Me, 8–10) with imidazole-4-carboxaldehyde (R₂ = H: 5, 8), 2-methylimidazole-4-carboxaldehyde (R₂ = Me: 6, 9), and 2-phenyl-imidazole-4-carboxaldehyde (R₂ = Ph: 7, 10) in the presence of iron(II) thiocyanate. Together with the single-crystal X-ray structures of 7 and 9, variable-temperature magnetic susceptibility and Mössbauer studies of 5–10 showed that it is possible to tune the spin crossover properties in the [FeL^Cx(NCS)₂] series by changing the 2-imidazole and/or C2-propylene susbtituent of L^Cx.