Enantiomerically pure 4-amino-1,2,3-trihydroxybutylphosphonic acids

(1S,2R,3S)-, (1R,2R,3S)- and (1S,2R,3R)-4-amino-1,2,3-trihydroxybutylphosphonic acids were synthesised. The synthetic strategy involved preparation of the respective 4-azido-2,3-O-isopropylidene-l-threose or -d-erythrose, addition of dialkyl phosphites, separation of C-1 epimeric O,O-dibenzyl phosphonates, the reduction of azides and the removal of the protecting groups. The (2R,3S) and (2R,3R) configurations in the final products were secured by employing diethyl l-tartrate and d-isoascorbic acid as starting materials. The stereochemical course of the addition to the carbonyl groups in 4-azido-2,3-O-isopropylidene-l-threose or -d-erythrose followed that established earlier for 2,3-O-isopropylidene-d-glyceraldehyde and similar (3:1-4:1) diastereoselectivities were achieved.     

Synthesis,resolution and absolute configuration of a tolperisone metabolite

1-(4′-Hydroxymethyl-phenyl)-2-methyl-3-(piperidine-1-yl)-propane-1-one M2, a metabolite of tolperisone, was synthesised in a solvent-free Mannich reaction. The optical resolution was carried out by diastereoisomeric salt formation and separation, for which three resolving agents ((2R,3R)-O,O′-dibenzoyl tartaric acid, (2R,3R)-O,O′-di-p-toluoyl tartaric acid and (R)-2-hydroxy-4-(2-methoxyphenyl)-5,5-dimethyl-1,3,2-dioxaphosphorinane-2-oxide (anicyphos)) were found. The absolute configuration of M2 was determined by the single-crystal X-ray diffraction method.     

Studies towards the synthesis of (1R,2S)- and (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonates and (1S,2S)- and (1R,2S)-2,3-epoxy-1-hydroxypropylphosphonates

The trans-configured fosfomycin analogue, diethyl (1S,2S)-1,2-epoxy-3-hydroxypropylphosphonate, was synthesised by the intramolecular Williamson reaction of diethyl (1S,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate. The cis-analogue was obtained as O-ethyl or O,O-diethyl (1R,2S)-1,2-epoxy-3-hydroxypropylphosphonates, when (1R,2R)-1,3-dihydroxy-2-mesyloxypropylphosphonate or its 3-O-trityl derivative were used as starting materials, respectively. The intramolecular Williamson cyclisations of diethyl (1S,2R)- and (1R,2S)-1-benzyloxy-3-hydroxy-2-mesyloxypropylphosphonates led to diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, respectively, with the concomitant formation of diethyl (E)-1-benzyloxy-3-hydroxyprop-1-en-1-phosphonate. From diethyl (1S,2S)- and (1R,2S)-2,3-epoxy-1-benzyloxypropylphosphonates, enantiomerically pure diethyl (1S,2S)- and (1R,2S)-1,2-dihydroxypropylphosphonates were obtained by catalytic hydrogenation, while diethyl (1S,2S)- and (1R,2S)-3-acetamido-1,2-dihydroxypropylphosphonates were produced after epoxide ring opening with dibenzylamine, acetylation and hydrogenolysis.     

Three New Myrsinol Diterpenes from <em>Euphorbia prolifera</em> and Their Neuroprotective Activities

Three new myrsinol diterpenes were isolated from the roots of Euphorbia prolifera. Their structures were elucidated as 2α-O-isobutyryl-3β,5α,7β,10,15β-penta-O-acetyl-14α-O-benzoyl-10,18-dihydromyrsinol (1), 2α-O-isobutyryl-3β-O-propion-yl-5α,7β,10,15β-tetra-O-acetyl-10,18-dihydromyrsinol (2), and 2α,14α-di-O-benzoyl-3β,5α,7β,10,15β-penta-O-acetyl-10,18-dihydromyrsinol (3) on the basis of spectroscopic data analyses (IR, ESI-MS, HR-ESI-MS, and 1D and 2D NMR). Their neuroprotective activities were evaluated and compounds 1 and 2 showed neuroprotective effects against MPP⁺-induced neuronal cell death in SH-SY5Y cells.     

Studies on the Michael addition of naphthoquinones to sugar nitro olefins: first synthesis of polyhydroxylated hexahydro-11H-benzo[a]carbazole-5,6-diones and hexahydro-11bH-benzo[b]carbazole-6,11-diones

A strategy for the synthesis of the novel (6bR,7R,8S,9S,10S,10aR)-8-(benzyloxy)-7,9,10-trihydroxy-6b,7,8,9,10,10a-hexahydro-11H-benzo[a]carbazole-5,6-dione is reported. The key steps were the Michael addition of 2-hydroxy-1,4-naphthoquinone to 1-nitrocyclohexene or 3-O-benzyl-5,6-dideoxy-1,2-O-isopropylidene-6-nitro-α-d-xylo-hex-5-enefuranose and the diastereoselective intramolecular Henry reaction of 3-O-benzyl-5,6-dideoxy-5-C-(3′-hydroxy-1′,4′-naphthoquinon-2′-yl)-1,2-O-isopropylidene-6-nitro-α-d-glucofuranose to give the key (1S,2S,3S,4R,5R,6R)-3-(benzyloxy)-1,2,4-trihydroxy-5-(3′-hydroxy-1′,4′-naphthoquinon-2′-yl)-6-nitrocyclohexane. When 2-hydroxy-1,4-naphthoquinone was replaced by (1,4-dimethoxynaphthalen-2-yl)lithium, the novel (1R,2S,3S,4R,4aS,11bS)-2-(benzyloxy)-1,3,4-trihydroxy-1,2,3,4,4a,5-hexahydro-11bH-benzo[b]carbazole-6,11-dione was obtained.     

Stereocontrolled transformation of nitrohexofuranoses into cyclopentylamines via 2-oxabicyclo[2.2.1]heptanes. Part 6: synthesis and incorporation into peptides of the first reported 2,3-dihydroxycyclopentanecarboxylic acid

Herein we report the intramolecular alkylation of nitronates of methyl-5-O-benzyl-3,6-deoxy-6-nitro-β-d-glucofuranoside and methyl-5-O-benzyl-3,6-deoxy-6-nitro-α-d-glucofuranoside into the corresponding 2-oxabicyclo[2.2.1]heptane derivatives. Similarly, methyl-3-O-benzyl-5-deoxy-5-nitromethyl-β-d-xylofuranoside and methyl-3-O-benzyl-5-deoxy-5-nitromethyl-α-d-xylofuranoside were cyclized to (1R,3R,4S,5R,7R)-7-benzyloxy-3-methoxy-5-nitro-2-oxabicyclo[2.2.1]heptane and (1R,3S,4S,5R,7R)-7-benzyloxy-3-methoxy-5-nitro-2-oxabicyclo[2.2.1]heptane, respectively. These 2-oxabicyclo[2.2.1]heptane derivatives were eventually transformed into enantiopure methyl (1S,2S,3R,4S,5R)-2-amino-2,3-dihydroxycyclopentanecarboxylate and this novel β-amino acid was incorporated into peptides.     

Ferro- and Antiferromagnetic Interactions in Oxalato-Centered Inverse Hexanuclear and Chain Copper(II) Complexes with Pyrazole Derivatives

Two novel copper(II) complexes of formulas {[Cu(4-Hmpz)₄][Cu(4-Hmpz)₂(µ₃-ox-κ²O¹,O²:κO^2′:κO^1′)(ClO₄)₂]}_n (1) and {[Cu(3,4,5-Htmpz)₄]₂[Cu(3,4,5-Htmpz)₂(µ₃-ox-κ²O¹,O²:κO^2′:κO^1′)(H₂O)(ClO₄)]₂[Cu₂(3,4,5-Htmpz)₄(µ-ox-κ²O¹,O²:κ²O^2′,O^1′)]}(ClO₄)₄·6H₂O (2) have been obtained by using 4-methyl-1H-pyrazole (4-Hmpz) and 3,4,5-trimethyl-1H-pyrazole (3,4,5-Htmpz) as terminal ligands and oxalate (ox) as the polyatomic inverse coordination center. The crystal structure of 1 consists of perchlorate counteranions and cationic copper(II) chains with alternating bis(pyrazole)(µ₃-κ²O¹,O²:κO^2′:κO^1′-oxalato)copper(II) and tetrakis(pyrazole)copper(II) fragments. The crystal structure of 2 is made up of perchlorate counteranions and cationic centrosymmetric hexanuclear complexes where an inner tetrakis(pyrazole)(µ-κ²O¹,O²:κ²O^2′,O^1′-oxalato)dicopper(II) entity and two outer mononuclear tetrakis(pyrazole)copper(II) units are linked through two mononuclear aquabis(pyrazole)(µ₃-κ²O¹,O²:κO^2′:κO^1′-oxalato)copper(II) units. The magnetic properties of 1 and 2 were investigated in the temperature range 2.0–300 K. Very weak intrachain antiferromagnetic interactions between the copper(II) ions through the µ₃-ox-κ²O¹,O²:κO^2′:κO^1′ center occur in 1 [J = −0.42(1) cm⁻¹, the spin Hamiltonian being defined as H = −J∑S_1,i · S_2,i+1], whereas very weak intramolecular ferromagnetic [J = +0.28(2) cm⁻¹] and strong antiferromagnetic [J’ = −348(2) cm⁻¹] couplings coexist in 2 which are mediated by the µ₃-ox-κ²O¹,O²:κO^2′:κO^1′ and µ-ox-κ²O¹,O²:κ²O^2′,O^1′ centers, respectively. The variation in the nature and magnitude of the magnetic coupling for this pair of oxalato-centered inverse copper(II) complexes is discussed in the light of their different structural features, and a comparison with related oxalato-centered inverse copper(II)-pyrazole systems from the literature is carried out.     

A comparative mechanistic analysis of the stereoselectivity trends observed in the oxidation of chiral oxazolidinone-functionalized enecarbamates by singlet oxygen, ozone, and triazolinedione

The stereoselectivity in the reactions of the E/Z enecarbamates 1, equipped with the oxazolidinone chiral auxiliary, has been examined for singlet oxygen (¹O₂), ozone (O₃), and 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) in a variety of solvents as a function of temperature. The oxidative cleavage of the alkenyl functionality by ¹O₂ and O₃ releases the enantiomerically enriched methyldesoxybenzoin (MDB) product. The extent (% ee) as well as the sense (R vs S) of the stereoselectivity in the MDB formation depends on the electronic nature of the oxidant. A high stereoselectivity, substantially dependent on solvent and temperature, is displayed for the reactions with ¹O₂, whereas the ground-state reactants O₃ and PTAD are rather unaffected by solvent and temperature variations. The present comparative analysis clearly substantiates our hypothesis of stereoselective vibrational quenching of the attacking ¹O₂, whereas O₃ and PTAD are only subject to steric impositions. The electronically excited ¹O₂ is sensitive to all three stereochemically relevant structural characteristics embodied in the chiral enecarbamates, namely the R/S configuration at the C₄ position of the oxazolidinone chiral auxiliary, the Z/E geometry of the ‘alkene’ functionality, and R/S configuration at the C_3′ position of the enecarbamate side chain.     

The Na2O-SrO-B2O3 diagram in the B-rich part and the crystal structure of NaSrB5O9

The subsolidus phase relations in the B-rich part of the ternary system, Na₂O-SrO-B₂O₃, are investigated by the powder X-ray diffraction method. Four ternary compounds: NaSrBO₃, NaSr₄B₃O₉, Na₃SrB₅O₁₀ and NaSrB₅O₉ were found in it, the two lasts are new. NaSrB₅O₉ crystallizes in the monoclinic space group P2₁/c, with the lattice parameters a=6.4963(1) Å, b=13.9703(2) Å, c=8.0515(1) Å, β=106.900(1)°. Na₃SrB₅O₉ is also monoclinic, space group C2, a=7.290(1) Å, b=13.442(2) Å, c=9.792(1) Å, β=109.60(1). NaSrB₅O₉ is isostructural with another pentaborate NaCaB₅O₉, and its structure was refined by Rietveld method based on the structural model of NaCaB₅O₉. The fundamental building units are [B₅O₉]³⁻ anionic groups, forming complex thick anionic sheets, extending parallel to the ac plane. The Na and Sr atoms are all eight-coordinated with O atoms, forming trigonal dodecahedra. The [NaO₈] polyhedra are distributed between the B-O sheets, while the [SrO₈] polyhedra located in the sheets and connect with each other by edges to form infinite chains along the c-axis.     

Ruthenium complexes that incorporate a chiro-inositol derived diphosphinite ligand as catalysts for asymmetric hydrogenation reactions

The diol, 1d-1,2,5,6-tetra-O-methyl-chiro-inositol (D-9), can be conveniently prepared from 1d-chiro-inositol using a series of standard protection/deprotection steps. Treatment of D-9 with Ph₂PCl gives the chiral diphosphinite, 1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol (D-10). The structure of D-10 has been determined by X-ray crystallography. Using 1l-chiro-inositol as starting material and following the same synthetic sequence used to produce D-10, the other enantiomer of this diphosphinite, 1l-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol (L-10) can also be obtained. Ruthenium complexes of these diphosphinite ligands can be conveniently prepared through ligand substitution reactions with appropriate substrate complexes. Thus, treatment of [RuCl₂(COD)]_n with D-10 in the presence of triethylamine produces the bis(diphosphinite) complex, RuHCl{κ²(P,P)-1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol}₂ (11). In addition, reaction between RuCl₂(PPh₃)₃, D-10 and (1R,2R)-(+)-1,2-diphenylethylenediamine gives the mono(diphosphinite) complex, RuCl₂{κ²(P,P)-1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol}{κ²(N,N)-(1R,2R)-(+)-1,2-diphenylethylenediamine} (12). The closely related complex RuCl₂{κ²(P,P)-1d-3,4-bis(O-diphenylphosphino)-1,2,5,6-tetra-O-methyl-chiro-inositol}{κ²(N,N)-(1S,2S)-(−)-1,2-diphenylethylenediamine} (13) can be obtained in a similar manner using (1S,2S)-(−)-1,2-diphenylethylenediamine in place of the corresponding (+)-isomer. These new chiral, diphosphinite complexes catalyse the hydrogenation of the ketones acetophenone and 3-quinuclidinone to give the corresponding alcohols with low to moderate enantiomeric excesses. The complexes are not catalytically active for the hydrogenation of the olefin dimethylitaconate or the α-ketoester methyl benzoylformate.     

Dinuclear Pd(II) and Rh(I) complexes of tetra-acetylethane: Linkage isomerization of tetra-acetylethane dianion in Pd(II) complexes

The Pd(II) and Rh(I) complexes of tetra-acetylethane [H₂dahd (3,4-diacetyl-2,4-hexadiene-2,5-diol)] with O,O′-bonded chelates, represented as [M₂(O₂,O′₂-dahd)(L₂)₂][X]_m {M = Pd, L₂ = (PPh₃)₂ or bdpe [1,2-bis(diphenylphosphino)ethane], X = BF₄ or PF₆, m = 2; M = Rh, L = Co, m = 0}, have recently been prepared. [Pd₂(O₂,O′₂-dahd)-(PPh₃)₄][PF₆]₂ reacts with the potentially bidentate 1,10-phenanthroline (phen) to give the five-coordinate complex [Pd(PPh₃)(phen)₂][PF₆]₂ and [Pd(O₁,O′₁-dahd)(phen)]_n, the latter of which is rather insoluble in organic solvents. [Pd(O₁, O′₁-dahd)(phen)]_n in CH₂Cl₂ readily transforms to a monomer complex [Pd(C³, O′-dahd)phen)]. These anomalous Pd(II) and Rh(I) complexes of the tetra-acetylethane dianion have been characterized from elemental analyses, conductance, IR, ¹H and ¹³C NMR spectroscopy, magnetic susceptibility and ESR spectroscopy.     

Characterisation and properties of new ionic liquids with the difluoromono[1,2-oxalato(2-)-O,O′]borate anion

Three ionic liquids with borate anions of low symmetry, tetraethylammonium difluoromono[1,2-oxalato(2-)-O,O′]borate, 1-ethyl-3-methylimidazolium difluoromono[1,2-oxalato(2-)-O,O′]borate, and 1-butyl-3-methylimidazolium difluoromono[1,2-oxalato(2-)-O,O′]borate were synthesised and characterised by physicochemical and electrochemical measurements including thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), cyclic voltammetry (CV), viscosity and conductivity measurements.     

A novel asymmetric synthesis of oseltamivir phosphate (Tamiflu) from (−)-shikimic acid

Oseltamivir phosphate 1 was synthesized starting from a readily available acetonide, that is, ethyl (3R,4S,5R)-3,4-O-isopropylidene shikimate 2, through a new route via 11 steps and in 44% overall yield. The synthesis described in this article is characterized by two particular steps: the highly regioselective and stereoselective facile nucleophilic replacement of an OMs by an N₃ group at the C-3 position of ethyl (3R,4S,5R)-3,4-O-bismethanesulfonyl-5-O-benzoyl shikimate 5, and the mild ring-opening of an aziridine with 3-pentanol at the C-1 position of ethyl (1S,5R,6S)-7-acetyl-5-benzoyloxy-7-azabicyclo[4,1,0]hept-2-ene-3-carboxylate 8.     

Crystal structure of Fe2P2O7

Fe₂P₂O₇ crystallizes in the $\text{C}\text{1}$ space group with lattice parameters a = 6.649(2)Å, b = 8.484(2)Å, c = 4.488(1)Å, α = 90.04°, β = 103.89(3)°, γ = 92.82(3)°, and ?_cal = 3.86 g/cc. It is essentially isostructural with β-Zn₂P₂O₇. As in the Zn compound, the bridging oxygen atom in the P₂O₇ group shows a high anisotropic thermal motion. It appears that the P-O-P bond angle is linear as a result of extensive π bonding with the p orbitals on the bridging oxygen atom. The high thermal motion is vibration of the atom into cavities in the structure.     

Structural study of the NaCdVO4-Cd3V2O8 and CdO-V2O5 sections of the ternary system Na2O-CdO-V2O5

The NaCdVO₄-Cd₃V₂O₈ and CdO-V₂O₅ sections of the ternary system Na₂O-CdO-V₂O₅ have been studied and the crystal structures of Cd₃V₂O₈ and Cd₁₈V₈O₃₈ compounds were determined from single-crystal X-ray diffraction data. Cd₃V₂O₈ crystallizes with the maricite-type structure in space group Pnma, a=9.8133(10) Å, b=6.9882(10) Å, c=5.3251(10) Å and Z=4, whereas Cd₁₈V₈O₃₈ crystallizes in space group P1 with a new-type structure, a=8.5761(14), b=8.607(3), c=12.896(2) Å, α=95.64(1), β=102.45(1), γ=108.42(1)° and Z=1. The Cd₃V₂O₈ structure is made up of Cd1O₄ infinite chains of edge-sharing Cd1O₆ octahedra which are parallel to the b direction. The Cd1O₄ chains are linked together by VO₄ tetrahedra and strongly distorted Cd2O₄ tetrahedra. The structure of Cd₁₈V₈O₃₈ is based on an ordered three-dimensional framework of cadmium and vanadium polyhedra that share corners. The distorted CdO₆ octahedra, CdO₅ trigonal bipyramids and CdO₅ square pyramids share corners, edges or faces.     

Classification of Simple Oxides: A Polarizability Approach

A simple oxide classification has been proposed on the basis of correlation between electronic polarizabilities of the ions and their binding energies determined by XPS. Three groups of oxides have been considered taking into account the values obtained on refractive-index- or energy-gap-based oxide ion polarizability, cation polarizability, optical basicity, O 1s binding energy, metal (or nonmetal) binding energy, and Yamashita-Kurosawa's interaction parameter of the oxides. The group of semicovalent predominantly acidic oxides includes BeO, B₂O₃, P₂O₅, SiO₂, Al₂O₃, GeO₂, and Ga₂O₃ with low oxide ion polarizability, high O 1s binding energy, low cation polarizability, high metal (or nonmetal) outermost binding energy, comparatively low optical basicity, and strong interionic interaction, leading to the formation of strong covalent bonds. Some main group oxides so-called ionic or basic such as CaO, In₂O₃, SnO₂, and TeO₂ and most transition metal oxides show relatively high oxide ion polarizability, O 1s binding energy in a very narrow medium range, high cation polarizability, and low metal (or nonmetal) binding energy. Their optical basicity varies in a narrow range and it is close to that of CaO. The group of very ionic or very basic oxides includes CdO, SrO, and BaO as well as PbO, Sb₂O₃, and Bi₂O₃, which possess very high oxide ion polarizability, low O 1s binding energy, very high cation polarizability, and very low metal (or nonmetal) binding energy. Their optical basicity is higher than that of CaO and the interionic interaction is very weak, giving rise to the formation of very ionic chemical bonds.     

Crystal structure of the pyrovanadate K4V2O7

The crystal structure of anhydrous K₄V₂O₇ (I) is determined by powder X-ray diffraction. The compound crystallizes in the monoclinic system (a = 10.222(1) Å, b = 6.2309(8) Å, c = 7.282(1) Å, β = 101.31(1)°, space group C2/m, Z = 2). The structure contains layers of isolated V₂O₇ pyrovanadate groups separated by layers of potassium cations. The hydration and dehydration of I are studied by thermal analysis and high-temperature X-ray diffraction. The dehydration is accompanied by decomposition of the starting crystal hydrate to give intermediate compounds. Anhydrous compound I undergoes a reversible phase transition at 740°C. The high-temperature phase is assumed to have a hexagonal unit cell (a = 6.169(4) Å, c = 15.72(1) Å, Z = 2).     

Hydrothermal synthesis and electrochemistry of a manganese vanadium oxide, γ-MnV2O5

A new manganese vanadium oxide MnV₂O₅ has been synthesized using a mild hydrothermal reaction. MnV₂O₅ crystallizes in the orthorhombic system, space group Pnma, a=9.7585(2) Å, b=3.5825(1) Å, c=11.2653(2) Å. It is isostructural to γ-LiV₂O₅. It reacts readily and reversibly with lithium, with a stable capacity but with a large polarization.     

The Crystal Structure of Sr2TiSi2O8

Sr₂TiSi₂O₈ single crystals were grown by Czochralski pulling and from a high-temperature solution. X-ray diffractometry revealed the modulated crystal structure of Sr₂TiSi₂O₈ to belong to the 5D superspace group P4bm (−α, α, 1/2; α, α, 1/2) with α=0.3. Atomic positions, anisotropic displacement factors and positional modulation parameters for Sr₂TiSi₂O₈ are determined and discussed. The positional modulation is further investigated by electron diffraction and high-resolution transmission electron microscopy. In the latter experiments, the 2D modulation appears to be superimposed by some 1D modulation waves. This effect is discussed in terms of growth conditions.