K2CO3-Promoted Domino Reactions for Synthesis of Isocoumarins Under Microwave Irradiation

A small library of isocoumarin derivatives has been synthesized via K₂CO₃-catalyzed domino reactions of 2-carboxybenzaldehyde and ω-bromoacetophenones under microwave irradiation (MW). This strategy offers a simple, environmentally acceptable route to synthesize isocoumarin derivatives in moderate to excellent yields. All new compounds were characterized by ¹H NMR, ¹³C NMR, infrared, and high-resolution mass spectroscopic techniques.     

Ammine Complexes of Na‐, Ag‐, Mn‐, and Zn‐Azides

The synthesis of ammine metal azides is achieved through a simple route in liquid ammonia solution. Azides of silver, sodium, manganese, and zinc were obtained as ammine complexes from liquid ammonia and the solid compounds were characterized. The NH₃ solutions were investigated by means of NMR spectroscopy as well. The triamminesilver(I) azide as well as the unusual tetraamminesilver(I) and pentaamminesodium(I) azides are presented. The structures of the hexaamminemanganese(II) and hexaamminezinc(II) azides, which crystallize with four ammonia molecules of solvation, are elucidated. From these compounds the binary azides Mn(N₃)₂ and Zn(N₃)₂ were obtained by (careful) heating.     

Studies of the Reaction Behavior of Nitryl Compounds Towards Azides: Evidence for Tetranitrogen Dioxide,N4O2

The reaction behavior of NaN₃, AgN₃, and Me₃SiN₃ towards FNO₂, CINO₂, NO₂SbF₆, and NO₂BF₄ was investigated. At -30°C or below in a solvent-free system sodium azide did not react with CINO₂, NO₂BF₄, or NO₂SbF₆. Below -30°C silver azide did not react either with neat C1NO₂. Treatment of Me₃SiN₃ with pure C1NO₂ led to the formation of C1N₃, N₂O, and Me₃SiOSiMe₃. A mechanism for this reaction has been proposed. Pure chlorine azide was isolated by fractional condensation and identified by its low-temperature Raman spectrum (liquid state). The reaction of Cp₂Ti(N₃)₂ with C1NO₂ also yielded C1N₃ as the only azide-containing reaction product. Treatment of FNO₂ with NaN₃ at temperatures as low as -78°C always ended in an explosion which was probably due to the formation of FN₃ as one of the reaction products. The reaction of NO₂SbF₆ with NaN₃ in liquid CO₂ (-55°C· T· -35°C) as the solvent afforded a new azide species which was stable at low temperature in solution only and was investigated by means of low-temperature Raman spectroscopy. The obtained vibrational data give strong evidence for the presence of tetranitrogen dioxide, N₄O₂, which can be regarded as nitryl azide (NO₂N₃). The structure and vibrational frequencies of N₄O₂ were computed ab initio at correlated level (MP2/6-31 + G^*). In liquid xenon (-100°C· T· -60°C) NaN₃ did not react with NO₂SbF₆. A previous literature report on the preparation of N₄O₂ could not be established.     

The chemistry of homophthalic acid: a new synthetic strategy for construction of substituted isocoumarin and indole skeletons

Homophthalic acid was reacted with thionylchloride/DMF and chloroethylformate/NEt₃ in the presence and absence of NaN₃. In all cases completely different isocoumarin derivatives were obtained. These unusual isocoumarin derivatives were isolated and characterized and their formation mechanisms are discussed. The homophthalic acid monomethyl ester was converted into the corresponding isocyanate. Reaction of the isocyanate with different amines produced the urea derivatives. Base-supported condensation reactions of these products gave first an indolinone derivative, which underwent further intermolecular condensation to give substituted indole derivatives. However, when the condensation reaction was carried out in the presence of acetic anhydride, the intermolecular reactions were suppressed. This methodology opens up a new way of synthesizing of various five-membered ring substituted indole derivatives.     

A practical and highly efficient transfer hydrogenation of aryl azides using a [Ru(p-cymene)Cl2]2 catalyst and sodium borohydride

Various aniline derivatives were synthesized by selective reduction of aryl azides in the presence of a dichloro(p-cymene)ruthenium(II) dimer ([Ru(p-cymene)Cl₂]₂) via hydrolysis of sodium borohydride. The hydrogenation reactions were carried out in aqueous media at room temperature. Most of the reactions were completed within 10 min with quantitative yields.     

Carbon-13 NMR spectra of isocoumarin,N-methyl-1(2H)-isoquinolinone and related compounds

The ¹³C NMR spectra of isocoumarin, N-methyl-1(2H)-isoquinolinone and 14 of their 3- and/or 4-substituted derivatives were measured and assigned with the aid of various spectral techniques. The values of the one-bond and some of the long-range ¹³C-¹³C-¹H coupling constants are reported. The effect of substitution on the ¹³C chemical shifts is discussed.     

Reduction of Azide to Amine Using Fe/AlCl3 or Fe/BiCl3 System in Aqueous EtOH

Azides were reduced to the corresponding amines by two new metal/Lewis acid systems in aqueous EtOH with yields ranging from 80% to 95%. The new reduction systems were Fe/AlCl3·6H2O or Fe/BiCl3 system in H2O/ethanol （2 ： 1, Ⅴ ：Ⅴ） at room temperature. Fifteen azides with different functional groups were well reduced to the corresponding amines in excellent yields.     

NMR and mass spectral analysis of step-growth polymers from azide alkyne cycloaddition and regioselectivity afforded by copper(I) and ruthenium(II) catalysts

Azide alkyne cycloaddition was applied to step growth polymerization of the diazido monomer, di(3-azido-2-hydroxypropyl) ether of bisphenol-A (DAHP-BPA) with either tetraethyleneglycol dipropargyl ether (TEGDPE) or tetraethyleneglycol dipropiolate (TEGDP). Polymerizations were conducted without catalyst and in the presence of Cu(I) or Ru(II) complex. The resulting oligomers and polymers were characterized using ¹H- and ¹³C-NMR spectroscopy and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), with an emphasis on the relative abundance of 1,4- vs. 1,5-disubstituted regioisomeric 1,2,3-triazoles. Uncatalyzed reaction of DAHP-BPA/TEGDPE at 70°C yielded a 55/45 mixture of 1,4/1,5-disubstituted triazoles; reaction was slow and residual alkyne end groups were observed, suggesting attritional loss of azide. Catalyzed with Cu(PPh₃)₃Br, the same system yielded 93/7, 1,4/1,5-disubstituted triazoles, and few residual end groups were detected, consistent with higher molecular weight and controlled 1:1 depletion of azide and alkyne. Cp*RuCl(COD) catalyst was not soluble in the bulk system, necessitating solution polymerization in THF. Ru(II) yielded 6/94, 1,4/1,5-disubstituted triazoles, and MALDI-TOF-MS showed an end group composition similar to that observed with Cu(I). Uncatalyzed reaction of the DAHP-BPA/TEGDP system, involving the more reactive propiolate, yielded a high proportion (85%) of 1,4-disubstituted triazole linkages, and MALDI-TOF-MS revealed a controlled 1:1 depletion of azide and alkyne groups.     

Study on the reactions of fluoroalkanesulfonyl azides with pyrazine and its derivatives

The thermal reactions of fluoroalkanesulfonyl azides R_fSO₂N₃ with pyrazine and its derivatives are studied in detail. All the reactions involved the fluoroalkanesulfonyl nitrene intermediates R_fSO₃N: which was captured by pyrazine to give the pyrazinium N-fluoroalkanesulfonyl ylides C₄NH₄N⁺-⁻NSO₂R_f and hydrogen abstraction product R_fSO₂NH₂, but no corresponding N-pyrazinyl fluoroalkanesulfonyl amide derivatives R_fSO₂NHC₄N₂H₃ were isolated. Excess azides did not afford the bisN-ylide product R_fSO₂N⁻-⁺NC₄H₄N⁺-⁻NSO₂R_f.     

Synthesis of cyclohexane derivatives including Br,Cl, N,O, and S at 1,2,4,5-positions: selectivity in addition reactions

Brominations of mono addition products of 1,4-cyclohexadiene with 2,4-dinitrobenzenesulfenyl chloride (RSCl) selectively gave 1R(S),2R(S),4R(S),5R(S)-4,5-dibromo-2-(2,4-dinitrophenylthio)cyclohexyl acetate and 1R(S),2R(S),4R(S),5R(S)-4,5-dibromo-2-chlorocyclohexyl)(2,4-dinitrophenylthio)sulfane. From series reactions 7-oxabicyclo[4.1.0]hept-3-ene with reagents, such as RSCl, NaN₃, and H₂SO₄/Ac₂O, six 1,2,4,5-tetrasubstituted cyclohexane derivatives including S, O, N, Cl, and Br were selectively obtained. Formations and structures of the products were discussed.     

Reactions of Organic Azides with Half‐sandwich Complexes of Iridium: Preparation of Mono‐ and Bis(imine) Derivatives

Imine complexes [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}{P(OR)₃}]BPh₄ ( 1 , 2 ) (Ar = C₆H₅, 4‐CH₃C₆H₄; R = Me, Et) were prepared by allowing chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] to react with benzyl azides ArCH₂N₃. Bis(imine) complexes [Ir(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂{P(OR)₃}](BPh₄)₂ ( 3 , 4 ) were also prepared by reacting [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] first with AgOTf and then with benzyl azide. Depending on the experimental conditions, treatment of the dinuclear complex [IrCl₂(η⁵‐C₅Me₅)]₂ with benzyl azide yielded mono‐ [IrCl₂(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}] ( 5 ) and bis‐[IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)Ar}₂]BPh₄ ( 6 ) imine derivatives. In contrast, treatment of chloro complexes [IrCl₂(η⁵‐C₅Me₅){P(OR)₃}] with phenyl azide C₆H₅N₃ gave amine derivatives [IrCl(η⁵‐C₅Me₅)(C₆H₅NH₂){P(OR)₃}]BPh₄ ( 7 , 8 ). The complexes were characterized spectroscopically (IR, NMR) and by X‐ray crystal structure determination of [IrCl(η⁵‐C₅Me₅){κ¹‐NH=C(H)C₆H₄‐4‐CH₃}{P(OEt)₃}]BPh₄ ( 2b ).     

FeCl3-NaI mediated reactions of aryl azides with 3,4-dihydro-2H-pyran: a convenient synthesis of pyranoquinolines

The tetrahydroquinoline moiety is an important structural component of a number of natural products. The reaction of aryl azides with 3,4-dihydro-2H-pyran in the presence of FeCl₃-NaI affords the corresponding tetrahydroquinoline derivatives in an efficient manner. Most of the cyclizations exhibited cis selectivity.     

Bioactive compounds from the scale insect fungus Conoideocrella tenuis BCC 44534

Eleven new compounds, including two quinone derivatives of bioxanthracene, conoideocrellones A (1) and B (2), two bioxanthracenes 3 and 4, four isocoumarins and isocoumarin glycosides 7–10, two phenolic compounds 16 and 17, and a diterpenoid compound, conoideocin A (18), were isolated from culture of the scale-insect pathogenic fungus Conoideocrella tenuis BCC 44534. Seventeen known compounds, compounds 5 and 6, ES-242-2 and its atropisomer, isocoumarins and isocoumarin glycosides 11–15, 3,4,6-trihydroxymellein, cis-4,6-dihydroxymellein, metarhizins A (19) and B (20), BR-050 (21), 5α,8α-epidioxy-24(R)-methylcholesta-6,22-dien-3β-ol, zeorin, and conoideocrellide A, were also isolated from this fungus. Structures of these compounds were elucidated by NMR and MS data analyses. Compound 4 was active against Plasmodium falciparum K1 (IC₅₀ 6.6?μg/mL), while it did not show cytotoxicity. Conoideocrellone A (1) and compounds 3 and 7 exhibited cytotoxic activity, while conoideocin A (18) showed broad range of biological activities including antimalarial, antibacterial, and cytotoxic activities.     

Synthesis of perimidine and fused perimidine derivatives from reaction of 1,8-naphthalenediamine with an iminoisocoumarin

The isocoumarin derivative 1H-1-acetylimino-3-methylbenzo[c]pyran-4-carbonitrile reacts with 1,8-naphthalenediamine under basic conditions to give, primarily, 12-acetylisoquino[2,1-a]perimidin-13-amine. This undergoes a variety of reactions to give other isoquino[2,1-a]perimidine derivatives, ring opening to 2-(1H-perimidin-2-yl)phenylacetic acid derivatives and, in polyphosphoric acid, a new hexacyclic system, 6-methyl-7,13,13d-triazadibenzo[def,qr]chrysene.     

Improved Synthesis of CsN3

Cesium azide can conveniently be prepared from anhydrous CsF and (CH₃)₃SiN₃ in SO₂ solvent in high purity and yield. In this reaction, the initially generated SO₂F^— anion is converted in SO₂ solvent to solvated azide, (SO₂)_nN₃^—, which is labile and releases SO₂ under dynamic vacuum yielding pure CsN₃.     

Synthesis of Side Chain Substituted 3-Butylisocoumarins and Absolute Configurations of Natural Isocoumarins from <Emphasis Type="Italic">Artemisia dracunculus</Emphasis>

Summary. A series of 3-hydroxy- and 3-bromobutyl-substituted isocoumarins was synthesized. The absolute configurations of three isocoumarin derivatives from Artemisia dracunculus, namely (–)-epoxyartemidin, (–)-2-methoxydihydroartemidin, and (+)-3-hydroxyartemidin were determined by chemical means via derivatization, kinetic racemate resolution (Horeau method), and comparison of the circular dichroism (CD) spectra.DeceasedReceived March 17, 2003; accepted March 19, 2003 Published online August 18, 2003     

Luminescent mononuclear and dinuclear cycloplatinated (II) complexes comprising azide and phosphine ancillary ligands

A new series of cycloplatinated (II) complexes with general formulas of [Pt (bhq)(N₃)(P)] [bhq = deprotonated 7,8‐benzo[h]quinoline, P = triphenyl phosphine (PPh₃) and methyldiphenyl phosphine], [Pt (bhq)(P^P)]N₃ [P^P = 1,1‐bis (diphenylphosphino)methane (dppm) and 1,2‐bis (diphenylphosphino)ethane] and [Pt₂(bhq)₂(μ‐P^P)(N₃)₂] [P^P = dppm and 1,2‐bis (diphenylphosphino)acetylene] is reported in this investigation. A combination of azide (N₃^?) and phosphine (monodentate and bidentate) was used as ancillary ligands to study their influences on the chromophoric cyclometalated ligand. All complexes were characterized by nuclear magnetic resonance spectroscopy. To confirm the presence of the N₃^? ligand directly connected to the platinum center, complex [Pt (bhq)(N₃)(PPh₃)] was further characterized by single‐crystal X‐ray crystallography. The photophysical properties of the new products were studied by UV–Vis spectroscopy in CH₂Cl₂ and photoluminescence spectroscopy in solid state (298 or 77 K) and in solution (77 K). Using density functional theory calculations, it was proved that, in addition to intraligand charge‐transfer (ILCT) and metal‐to‐ligand charge‐transfer (MLCT) transitions, the L′LCT (L′ = N₃, L = C^N) electronic transition has a remarkable contribution in low energy bands of the absorption spectra (for complexes [Pt (bhq)(N₃)(P)] and [Pt₂(bhq)₂(μ‐P^P)(N₃)₂]). It is indicative of the determining role of the N₃^? ligand in electronic transitions of these complexes, specifically in the low energy region. In this regard, the photoluminescence studies indicated that the emissions in such complexes originate from a mixed ³ILCT/³MLCT (intramolecular) and also from aggregations (intermolecular).     

Ein oktaedrischer Niobcluster mit sechs terminalen Azidgruppen: Die Struktur von Rb4[Nb6Br12(N3)6](H2O)2

An Octahedral Niobium Cluster containing Six Terminal Azide Groups: The Structure of Rb₄[Nb₆Br₁₂(N₃)₆](H₂O)₂ Six terminal halide ligands of [Nb₆Br₁₂Br₆]^4? can be substituted in solution by azide ions. Single-crystals of Rb₄[Nb₆Br₁₂(N₃)₆](H₂O)₂ were obtained during the evaporation of the water/methanol solvent, and structurally characterized by X-ray methods: Space group P2₁/c, Z = 2, a = 970.8(5) pm, b = 1525.4(7) pm, c = 1280.0(7) pm, β = 97.15(6)°. The [Nb₆Br₁₂(N₃)₆]^4? ions contain six terminal azide groups at the corners of the octahedral niobium cluster (d _Nb–N = 227 pm). The [Nb₆Br₁₂(N₃)₆]^4? ions are interconnected by Rb⁺ and H₂O. Crystals of Rb₄[Nb₆Br₁₂(N₃)₆](H₂O)₂ are explosive towards heat or mechanic pressure.     

Homogeneous azidophenylselenylation of glycals using TMSN3-Ph2Se2-PhI(OAc)2

An improved preparative method for homogeneous azidophenylselenylation of glycals is described consisting of reaction with TMSN₃ and Ph₂Se₂ in the presence of PhI(OAc)₂. The use of TMSN₃ instead of NaN₃ as in the heterogeneous procedure, allowed both a reduced reaction time and a scale-up that was not possible in the case of the azidophenylselenylation of substituted glycals using NaN₃.