Synthesis of substituted tetrahydron-1H-carbazol-1-one and analogs via PhI(OCOCF3)2-mediated oxidative C–C bond formation

A variety of tetrahydro-1H-carbazol-1-ones and analogs were conveniently synthesized from the reaction of the corresponding 2-(phenylamino)cyclohex-2-enone with hypervalent iodine reagent PhI(OCOCF₃)₂ (PIFA), through a direct intramolecular oxidative C(sp²)–C(sp²) bond formation. This approach realized the construction of the biologically important tetrahydro-1H-carbazol-1-one and tetrahydrocyclohepta[b]indol-6(5H)-one skeletons. The mechanism of the process was proposed and briefly discussed.     

Pyrazine bridged benzyl dicobaloximes: Competition between π-interaction and steric crowding in crystal structure

Pyrazine (Pz) bridged benzyl dicobaloximes [ArCH₂Co(dioxime)₂]₂-μ-Pz [dioxime = dmgH, dpgH] have been synthesized and characterized with ¹H and ¹³C NMR. The complexes have been synthesized by a simple procedure in one-pot directly from the corresponding benzyl aqua cobaloxime. In the crystal structure of [PhCH₂Co(dpgH)₂]₂-μ-Pz, two cobaloxime units are in eclipsed form whereas they were completely staggered in the reported [EtCo(dpgH)₂]₂-μ-Pz. This is due to the π-π interaction between the axial benzyl group and phenyl ring of the equatorial dpgH group. Both cis and trans isomer crystallized together in the crystal structure of [PhCH₂Co(dpgH)(dmgH)]₂-μ-Pz. The cyclic voltammetry study in [PhCH₂Co(dioxime)₂]₂-μ-Pz [dioxime = dmgH, dpgH] shows two cobalt center mixed together due to electron delocalization through pyrazine and behaves like a monocobaloxime and the reduction potentials are much higher than the monocobaloximes.     

Synthesis and structural characterization of a dichloro zinc complex of N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane: Application to ring opening polymerization of rac-lactide

A novel dichloro zinc complex (L¹)ZnCl₂, where L¹ is N,N′-bis-(2,6-dichloro-benzyl)-(R,R)-1,2-diaminocyclohexane, has been synthesized and characterized. The dimethyl derivatives, generated in situ from the well characterized dichloro zinc complexes (L¹)ZnCl₂ and (L²)ZnCl₂, where L² is N,N′-bis-(benzyl)-(R,R)-1,2-diaminocyclohexane, were employed as initiators for the ring opening polymerization (ROP) of rac-lactide (rac-LA). The complexes were found to be highly efficient initiators yielding the polylactide (PLA) with a narrow molecular weight distribution. The catalytic activity and heterotactic selectivity of the Zn(II) complexes were affected by the substituents on the phenyl groups of benzyl moieties in (R,R)-1,2-diaminocyclohexane. The dimethyl derivative of (L²)ZnCl₂ produced highly stereocontrolled PLA with P_r = 0.75 at −25 °C.     

Stereoselective radical cyclizations of N-(2-halobenzoyl)-cyclic ketene-N,X(X=O, S)-acetals

2-Alkyloxazolines and 2-alkylthiazolines react with 2-halobenzoyl chlorides to form N-(2-halobenzoyl)-cyclic ketene-N,O-acetals and N-(2-halobenzoyl)-cyclic ketene-N,S-acetals in excellent yields, respectively. These ketene acetals readily undergo stereocontrolled aryl radical cyclizations to afford the central six-membered rings of substituted-2,3,10,10α-tetrahydrooxazolo[3,2-b]isoquinolin-5-ones and their 2,3,10,10α-tetrahydrothiazolo[3,2-b]isoquinolin-5-one analogs. The tertiary N,O- and N,S-radicals formed upon aryl radical reaction at the ketene-N,X(X=O, S)-acetal double bond appear to have reasonable stability. The stereoselectivity in hydrogen abstractions by these intermediate radicals from both Bu₃SnH and (Me₃Si)₃SiH was investigated. The N,S-heterocyclic fused ring products may have potential medical value.     

A convenient approach towards boron cluster modifications with adenosine and 2′-deoxyadenosine

New 2′-deoxyadenosine and adenosoine modifications: 8-[(2-dimethylaminoethyl)amino]-2′-deoxyadenosine and 8-[(2-dimethylaminoethyl)amino]adenosine were prepared and their reactivity towards cyclic oxonium adducts of closo-dodecaborate and cobalt-bis-dicarbollide was studied. The cleavage reactions of clusters oxonium rings by N,N-dimethylanio group of modified nucleosides led to the first [B₁₂H₁₂]²⁻ and new [Co(C₂B₉H₁₁)₂]⁻ conjugates with adenosine and 2′-deoxyadenosine respectively. The proposed methodology provides a convenient route for the synthesis of libraries of boron cluster modified adenosine and 2′-deoxyadenosine derivatives for biological screening.     

DNA binding and cleavage behaviors of copper(II) complexes with amidino-O-methylurea and N-methylphenyl-amidino-O-methylurea,and their antibacterial activities

The two designed copper(II) complexes, [Cu(L^1m)₂]Cl₂ (1) (L^1m = amidino-O-methylurea) and [Cu(L^2m)₂]Cl₂ (2) (L^2m = N-methylphenyl-amidino-O-methylurea), have been investigated for their interaction with calf thymus DNA by utilizing the absorption titration method, viscometric studies and thermal denaturation. The cleavage reaction on pBR322 DNA has been monitored by agarose gel electrophoresis. The results suggest that the two complexes can bind to DNA by non-intercalative modes and exhibit nuclease activities in which supercoiled plasmid DNA is converted to the linear form. Complex 2, with an intrinsic binding constant (K_b) of 1.16 × 10⁵ M⁻¹, shows a higher binding efficiency and a better nuclease activity than complex 1, with a K_b value of 5.67 × 10⁴ M⁻¹. Their DNA cleavage potential can be significantly enhanced by hydrogen peroxide, indicating an oxidative cleavage process. Further examination of the antibacterial activities against Campylobacter has revealed inhibition zones of 9.0 (for 1) and 14.5 mm (for 2), which are in agreement with their minimum inhibitory concentration (MIC) values of 1.56 and 0.78 mg mL⁻¹, respectively. The substantially better reactivity of 2 results from the aromatic moieties on the side chain of the L^2m ligand which act as an additional binding site.     

Copper(II) complexes with neutral Schiff bases: Syntheses, crystal structures and DNA interactions

The synthesis and X-ray structural characterisation of a new Cu(II) complex, [Cu(L¹)Cl](ClO₄)·CH₃OH (1) [L¹ = N,N′-bis((pyridine-2-yl)phenylidene)-1,3-diaminopropan-2-ol], has been described in this work. The structural study reveals that the Cu(II) centre in 1 has a square pyramidal geometry with a trigonality index τ = 0.43, being coordinated by the organic ligand and a chloro group. The interaction of complex 1 and another complex previously reported by our group, [Cu(L²)](ClO₄)₂ (2) [L² = N-(1-pyridin-2-yl-phenylidene)-N′-[2-({2-[(1-pyridin-2-ylphenylidene)amino]ethyl}amino)ethyl]ethane-1,2diamine], with calf thymus DNA (CT-DNA) has been investigated using absorption and emission spectral studies. The binding constant (K_b) and the linear Stern-Volmer quenching constant (K_sv) have been determined.     

A new class of aromatic polybenzoxazoles containing ortho-phenylenedioxy groups

A series of poly(o-hydroxy amide)s having both ether and ortho-catenated phenylene unit in the main chain were synthesized via the low-temperature solution polycondensation of 4,4^′-(1,2-phenylenedioxy)dibenzoyl chloride and 4,4^′-(4-tert-butyl-1,2-phenylenedioxy)dibenzoyl chloride with three bis(o-aminophenol)s including 4,4^′-diamino-3,3^′-dihydroxybiphenyl, 3,3^′-diamino-4,4^′-dihydroxybiphenyl, and 2,2-bis(3-amino-4-hydroxyphenyl)hexafluoropropane. The poly(o-hydroxy amide)s exhibited inherent viscosities in the range of 0.23-0.96 dl/g. Most of the poly(o-hydroxy amide)s were soluble in polar organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP) and could afford flexible and tough films by solution casting. Subsequent thermal cyclodehydration of the poly(o-hydroxy amide)s afforded polybenzoxazoles. However, the polybenzoxazoles were organic-insoluble except for those with the hexafluoroisopropylidene group. The polybenzoxazoles exhibited glass-transition temperatures (T_g) in the range of 200-232 °C by DSC and softening temperatures (T_s) of 250-256 °C by thermomechanical analysis. Thermogravimetric analyses indicated that most polybenzoxazoles were stable up to 500 °C in air or nitrogen. The 10% weight loss temperatures were recorded in the ranges of 546-606 °C in air and 574-631 °C in nitrogen.     

Synthesis, characterization and degradability of the novel aliphatic polyester bearing pendant N-isopropylamide functional groups

The synthesis, characterization, and degradability of the novel aliphatic polyester bearing pendant N-isopropylamide functional group are reported for the first time. 2-(N-Isopropyl-2-carbamoylethyl)cyclohexanone (CCH) was first synthesized by the Michael reaction of N-isopropylacrylamide with cyclohexanone and was subsequently converted into 6-(N-isopropyl-2-carbamoylethyl)-?-caprolactone (CCL) by the Baeyer-Villiger oxidation reaction using 3-chloroperoxybenzoic acid (mCPBA) as the oxidant. Finally, the novel functionalized poly(?-caprolactone) bearing the pendant N-isopropylamide functional groups, poly(6-(N-isopropyl-2-carbamoylethyl)-?-caprolactone-co-?-caprolactone)s (poly(CCL-co-CL)), were carried out successfully by bulk ring-opening polymerization of CCL and ?-CL initiated by Sn(Oct)₂. Poly(CCL-co-CL) were characterized by ¹H NMR, ¹³C NMR, SEC and DSC. The copolymer containing 9.1 mol% CCL formed flexible films and was used to study its degradability. A phosphate buffer (pH = 7.4) with temperature 37 °C was adopted to proceed the degrading study all through. Compared with poly(?-caprolactone), the hydrolytic degradation of poly(CCL-co-CL) was much faster, which is confirmed by the weight loss and change of intrinsic viscosity.     

Total synthesis of cucurbitoside A using a novel fluorous protecting group

The first total synthesis of cucurbitoside A was achieved using a new fluorous N-phenylcarbamoyl (^FCar) protecting group. The ^FCar group was introduced into carbohydrates in high yield and was selectively removed with Bu₄NNO₂ without damaging other acyl protecting groups. The synthetic intermediates were easily isolated by fluorous solid-phase extraction.     

The substrate specificity of the heat-stable stereospecific amidase from Klebsiella oxytoca

The substrate specificity of the heat-stable stereospecific amidase from Klebsiella oxytoca was investigated. In addition to the original substrate, 3,3,3-trifluoro-2-hydroxy-2-methylpropanamide, the amidase accepted 2-hydroxy-2-(trifluoromethyl)-butanamide and 3,3,3-trifluoro-2-amino-2-methylpropanamide as substrates. Compounds with larger side chains and compounds where the hydroxyl group was substituted with a methoxy group, or in which the CF₃ group was substituted by CCl₃, were not accepted. The biotransformation is a new synthetic route to (R)-(+)-3,3,3-trifluoro-2-amino-2-methylpropanoic acid, and its related (S)-(−)-amide, and to (R)-(+)-2-hydroxy-2-(trifluoromethyl)-butanoic acid and its related (S)-(−)-amide.     

Solid-state cis-trans isomerization reaction of (η-MeC5H4)W(CO)2P(OPr)3I

cis-(η⁵-MeC₅H₄)W(CO)₂P(OⁱPr)₃I (1) was converted to the trans isomer 2 in the solid state (90-110 °C). The reaction was monitored by heating 1 in NMR tubes for periods of time (2-60 min), cooling the tubes to room temperature and determining the conversion by solution ³¹P and ¹H NMR spectroscopy. The data were consistent with a first-order reaction and yielded an activation energy of 59 ± 3 kJ mol⁻¹. Comparative kinetic data were obtained from an in situ analysis of a powder-XRD study of 1. The powder-XRD study was conducted at 80-100 °C (10-60 min), yielding an activation energy of 52 ± 2 kJ mol⁻¹ (first-order reaction). The reaction could not be monitored by single crystal X-ray diffraction as the crystal disintegrated over time on heating. This disintegration process was monitored by optical microscopy and revealed that while the bulk crystal morphology was retained the crystal surface roughened with time. The compounds 1 and 2 were also structurally characterised by X-ray crystallographic techniques.     

Stereoselective synthesis of an ansa-zirconocene in a spirane scaffold

Methodology is described for the preparation of a rigid C₂-bridged zirconocene catalyst system where the C₂-bridge is embedded in a spirane scaffold. The ligand was prepared from 3,4-dihydro-2H-fluoren-1(9H)-one. Initially, the oxo group was converted into a spirocyclobutanone function. Further conversion to a fulvene was followed by regio- and stereoselective saturation to provide the ligand cis-2-(cyclopentadienyl)-1′,2′,3′,4′-tetrahydro-9H-spiro[cyclobutane-1,1′-fluorene]. The ligand was dilithiated and reacted with zirconium tetrachloride to provide the corresponding (η⁵-cyclopentadienyl)-spiro[cyclobutane-1,1′-(η⁵-fluorenyl)]zirconium dichloride complex. The structure of the zirconocene dichloride has been established by crystal X-ray analysis.     

Crystal and solution structures of di-n-butyltin(IV) complexes of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol and benzoic acid derivatives: En route to elegant self-assembly via modulation of the tin coordination geometry

Reactions of ⁿBu₂SnCl(L¹) (1), where L¹ = acid residue of 5-[(E)-2-(4-methoxyphenyl)-1-diazenyl]quinolin-8-ol, with various substituted benzoic acids in refluxing toluene, in the presence of triethylamine, yielded dimeric mixed ligand di-n-butyltin(IV) complexes of composition [ⁿBu₂Sn(L¹)(L^2-6)]₂ where L² = benzene carboxylate (2), L³ = 2-[(E)-2-(2-hydroxy-5-methylphenyl)-1-diazenyl]benzoate (3), L⁴ = 5-[(E)-2-(4-methylphenyl)-1-diazenyl]-2-hydroxybenzoate (4), L⁵ = 2-{(E)-4-hydroxy-3-[(E)-4-chlorophenyliminomethyl]-phenyldiazenyl}benzoate (5) and L⁶ = 2-[(E)-(3-formyl-4-hydroxyphenyl)-diazenyl]benzoate (6). All complexes (1-6) have been characterized by elemental analyses, IR, ¹H, ¹³C and ¹¹⁷Sn NMR and ¹¹⁹Sn Mössbauer spectroscopy and their structures were determined by X-ray crystallography, complemented by ¹¹⁷Sn CP-MAS NMR spectroscopy studies in the solid state. The crystal structure of 1 reveals a distorted trigonal bipyramidal coordination geometry around the Sn-atom where the Cl- and N-atoms of ligand L¹ occupy the axial positions. In complexes 2-5, the molecules are centrosymmetric dimers in which the Sn-atoms are connected by asymmetric μ-O bridges through the quinoline O-atom to give an Sn₂O₂ core. The differences in the Sn-O bond lengths within the bridge range from 0.28 to 0.48 Å, with the longer of the Sn-O distances being in the range 2.56-2.68 Å and the most symmetrical bridge being in 5. The carboxylate group is almost symmetrically bidentate coordinated to the tin atom in 5 (Sn-O distances of 2.327(2) and 2.441(2) Å), unlike the other complexes in which the distance of the carboxylate carbonyl O-atom from the tin atom is in the range 2.92-3.03 Å. The structure of 5 displays a more regular pentagonal bipyramidal coordination geometry about each tin atom than in 2-4. In contrast, the centrosymmetric dimeric structure of 6 involves asymmetric carboxylate bridges, resulting in a different Sn₂C₂O₄ motif. The Sn-O bond lengths in the bridge differ by about 0.6 Å, with the longer distance involving the carboxylate carbonyl O-atom (2.683(2) and 2.798(2) Å for two molecules in the asymmetric unit). The carboxylate carbonyl O-atom has a second, even longer intramolecular contact to the Sn-atom to which the carboxylate group is primarily coordinated, with these Sn?O distances being as high as 3.085(2) and 2.898(2) Å. If the secondary interactions are considered, all the di-n-butyltin(IV) complexes (2-6) display a distorted pentagonal bipyramidal arrangement about each tin atom in which the n-butyl groups occupy the axial positions.     

Ferro- and antiferromagnetic interactions in polymeric and molecular complexes of Cu(hfac)2 with 1-oxoazin-2-yl-substituted nitronyl nitroxides

Solid heterospin compounds based on Cu(hfac)₂ complexes with a new group of nitronyl nitroxides bearing different azine-N-oxide substituents at position 2 of the 2-imidazoline ring (Lⁿ) were studied. The major factor responsible for the change in the magnetic characteristics of the [Cu(hfac)₂L¹] complex with triazine nitronyl nitroxide with temperature was shown to be the specific pairwise packing of heterospin molecules with the dominant antiferromagnetic exchange between the radical fragments of adjacent molecules. For complexes of Cu(hfac)₂ with 1-oxoazin-2-yl-substituted nitronyl nitroxides L² and L⁴, 7-membered metallocycles were obtained, although they form rarely. It was shown that polymer chains formed in the solid complex with spin-labeled pyrazine-N-oxide [(Cu(hfac)₂)₃(L³)₂] due to the cross-linking of {(Cu(hfac)₂)₂(L³)₂} binuclear fragments via the bridging [Cu(hfac)₂].     

Reactions of oxonium derivatives of [B12H12] with amines: Synthesis and structure of novel B12-based ammonium salts and amino acids

The reactions of oxonium derivatives of [B₁₂H₁₂]²⁻ with various amines were studied. A series of novel B₁₂-species with ammonium group on the side chain was synthesized in high yield. A structure of tetrabutylammonium-[2-(2-morpholinium-ethoxy)-ethoxy]-undecahydro-closo-dodecaborate was determined and the existence of intramolecular N-H?O-B bond was shown. Using these reactions, novel boronated piperazines and amino acids were prepared.     

Syntheses and structures of iron carbonyl complexes derived from N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine and N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine

The reaction of N-(5-methyl-2-thienylmethylidene)-2-thiolethylamine (1) with Fe₂(CO)₉ in refluxing acetonitrile yielded di-(μ₃-thia)nonacarbonyltriiron (2), μ-[N-(5-methyl-2-thienylmethyl)-η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido]hexacarbonyldiiron (3), and N-(5-methyl-2-thienylmethylidene)amine (4). If the reaction was carried out at 45 °C, di-μ-[N-(5-methyl-2-thienylmethylidene)-η¹(N);η¹(S)-2-thiolethylamino]-μ-carbonyl-tetracarbonyldiiron (5) and trace amount of 4 were obtained. Stirring 5 in refluxing acetonitrile led to the thermal decomposition of 5, and ligand 1 was recovered quantitatively. However, in the presence of excess amount of Fe₂(CO)₉ in refluxing acetonitrile, complex 5 was converted into 2-4. On the other hand, the reaction of N-(6-methyl-2-pyridylmethylidene)-2-thiolethylamine (6) with Fe₂(CO)₉ in refluxing acetonitrile produced 2, μ-[N-(6-methyl-2-pyridylmethyl)-η¹ (N_py);η¹:η¹(N); η¹:η¹(S)-2-thiolatoethylamido]pentacarbonyldiiron (7), and μ-[N-(6-methyl-2-pyridylmethylidene)-η²(C,N);η¹:η¹(S)-2- thiolethylamino]hexacarbonyldiiron (8). Reactions of both complex 7 and 8 with NOBF₄ gave μ-[(6-methyl-2-pyridylmethyl)-η¹(N_py);η¹:η¹(N);η¹:η¹(S)-2-thiolatoethylamido](acetonitrile)tricarbonylnitrosyldiiron (9). These reaction products were well characterized spectrally. The molecular structures of complexes 3, 7-9 have been determined by means of X-ray diffraction. Intramolecular 1,5-hydrogen shift from the thiol to the methine carbon was observed in complexes 3, 7, and 9.     

Structure of N,C,N-chelated organotin(IV) fluorides

The set of starting tri-, di- and monoorganotin(IV) halides containing N,C,N-chelating ligand (L^NCN = {1,3-[(CH₃)₂NCH₂]₂C₆H₃}⁻) has been prepared (1-5) and two compounds structurally characterized ([L^NCNPh₂Sn]⁺I₃⁻ (1c), L^NCNSnBr₃ (5)) in the solid state. These compounds were reacted with KF with 18-crown-6, NH₄F or L^CNnBu₂SnF to give derivatives containing fluorine atom(s). Triorganotin(IV) fluorides L^NCNMe₂SnF (2a) and L^NCNnBu₂SnF (3a) revealed monomeric structural arrangement with covalent Sn-F bond both in the coordinating and non-coordinating solvents, except the behaviour of 3a that was ionized in the methanol solution at low temperature. The products of fluorination of L^NCNSnPhCl₂ (4) and 5 were described by NMR in solution as the ionic hypervalent fluorostannates or the oligomeric species reacting with chloroform, methanol or moisture to zwitterionic monomeric stannate L^NCN(H)⁺SnF₄⁻ (5c), which was confirmed by XRD analysis in the solid state.     

Group 4 metallocene complexes with non-bridged and tetramethyldisiloxane-bridged methyl-phenyl-cyclopentadienyl ligands: synthesis, characterization and olefin polymerization studies

The non-vicinal methyl-phenyl-substituted zirconocene dichlorides meso-and rac-[Zr{η⁵-(1-Ph-3-Me-C₅H₃)}₂Cl₂] and [Zr(η⁵-C₅H₅){η⁵-(1-Ph-3-Me-C₅H₃)}Cl₂] have been isolated by transmetallation of the lithium salt Li(1-Ph-3-Me-C₅H₃) to ZrCl₄(THF)₂ and [Zr(η⁵-C₅H₅)Cl₃ · DME] (DME = dimethoxyethane), respectively. Similar transmetallation of the lithium salt Li₂[(Me-Ph-C₅H₂SiMe₂)₂O] to MCl₄ gave the ansa-metallocenes [M{η⁵-(Me-Ph-C₅H₂SiMe₂)₂O}Cl₂] (M = Zr, Hf) for which the meso- and rac-diastereomers were separated. The dimethyl and dibenzyl derivatives of these metallocenes were also prepared and the structure of all of these compounds determined by NMR spectroscopy. The molecular structure of rac-[Zr{η⁵-(2-Me-4-Ph-C₅H₂SiMe₂)₂O}Cl₂] was determined by single crystal X-ray diffraction methods. The activity of the dichlorometallocenes/MAO catalysts for ethene and propene polymerization was evaluated.     

Preparation and reactivity of p-cymene complexes of ruthenium and osmium incorporating 1,3-triazenide ligands

p-Cymene complexes MCl₂(η⁶-p-cymene)L [M = Ru, Os; L = P(OEt)₃, PPh(OEt)₂, (CH₃)₃CNC] were prepared by allowing [MCl(μ-Cl)(η⁶-p-cymene)]₂ to react with phosphites or tert-butyl isocyanide. Treatment of MCl₂(η⁶-p-cymene)L complexes with 1,3-ArNNN(H)Ar triazene and an excess of NEt₃ gave the cationic triazenide derivatives [M(η²-1,3-ArNNNAr)(η⁶-p-cymene)L]BPh₄ (Ar = Ph, p-tolyl). Neutral triazenide complexes MCl(η²-1,3-ArNNNAr)(η⁶-p-cymene) (M = Ru, Os) were also prepared by allowing [MCl(μ-Cl)(η⁶-p-cymene)]₂ to react with 1,3-diaryltriazene in the presence of triethylamine. p-Cymene complexes MCl₂(η⁶-p-cymene)L reacted with equimolar amounts of 1,3-ArNNN(H)Ar triazene to give both triazenide complexes [M(η²-1,3-ArNNNAr)(η⁶-p-cymene)L]BPh₄ and amine derivatives [MCl(ArNH₂)(η⁶-p-cymene)L]BPh₄. A reaction path for the formation of the amine complex is also reported. The complexes were characterised by spectroscopy and X-ray crystallography of RuCl₂(η⁶-p-cymene)[PPh(OEt)₂] and [Ru(η²-1,3-p-tolyl-NNN-p-tolyl)(η⁶-p-cymene){CNC(CH₃)₃}]BPh₄. Selected triazenide complexes were studied as catalysts in the hydrogenation of 2-cyclohexen-1-one and cinnamaldehyde.