Adsorption and dissociation of NO on stepped Pt (533)

We present an experimental and theoretical investigation of the adsorption, desorption, and dissociation of NO on the stepped Pt (533) surface. By combining temperature programmed desorption and reflection absorption infrared spectroscopy, information about the adsorption sites at different temperatures is obtained. Surprisingly, metastable adsorption structures of NO can be produced through variation of the dosing temperature. We also show that part of the NO molecules adsorbed on the step sites dissociates around 450 K. After dissociation the N atoms can desorb either by combining with an O fragment, or with another N atom, resulting in NO and N(2). The N(2) production can be enhanced by coadsorbing CO on the surface: CO scavenges the oxygen atom, thereby suppressing associative recombinative desorption of N and O atoms. Density functional theory calculations are used to reveal the adsorption energies and vibrational frequencies of adsorbed NO as well as barriers for dissociation of NO and for diffusion of N atoms. The combined experimental results and theoretical calculations reveal that dissociation of NO is the rate limiting step in the formation of N(2).     

Low-temperature reduction of NO(2) on oxidized Mo(110)

The reactions of nitrogen dioxide (NO(2)) were investigated on oxidized Mo(110) containing both chemisorbed oxygen and a thin film oxide. NO(2) reacts on both oxidized Mo(110) surfaces via a combination of reversible adsorption and reduction to NO, N(2), and trace amounts of N(2)O below 200 K. On the surface containing chemisorbed O, there is some complete dissociation of NO(2) to yield N(a) and O(a). N(2) forms at high temperatures through atom combination. On both surfaces, NO is the predominant product of NO(2) reduction. However, the chemisorbed layer which has a low oxidation state, and hence a greater capacity to accept oxygen, more effectively reduces NO(2). The selectivity for N(2) formation over N(2)O is greater for NO(2) as compared with NO on both surfaces studied. The selectivity changes are largely attributed to an increase in the concentration of Mo=O species and a change in the distribution of oxygen on the surface. Notably, more oxygen, in particular Mo=O moieties, is deposited by NO(2) reaction than by O(2) reaction, indicating that NO(2) is a stronger oxidant. The fact that there are several N-containing species on the surface at low temperatures may also affect the product distribution. On both surfaces, N(2)O(4), NO(2), and NO are identified by infrared spectroscopy upon adsorption at 100 K. All N(2)O(4) desorbs by 200 K, leaving only NO(2) and NO on the surface. Infrared spectroscopy of NO(2) on (18)O-labeled surfaces provides evidence for oxygen transfer or exchange between different types of sites even at low temperatures.     

Formation of the surface NO during N2O interaction at low temperature with iron-containing ZSM-5

Interaction of N2O at low temperatures (473-603 K) with Fe-ZSM-5 zeolites (Fe, 0.01-2.1 wt %) activated by steaming and/or thermal treatment in He at 1323 K was studied by the transient response method and temperature-programmed desorption (TPD). Diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) of NO adsorbed at room temperature as a probe molecule indicated heterogeneity of surface Fe(II) sites. The most intensive bands were found at 1878 and 1891 cm(-1), characteristic of two types mononitrosyl species assigned to Fe2+(NO) involved in bi- and oligonuclear species. Fast loading of atomic oxygen from N2O on the surface and slower formation of adsorbed NO species were observed. The initial rate of adsorbed NO formation was linearly dependent on the concentration of active Fe sites assigned to bi- and oligonuclear species, evolving oxygen in the TPD at around 630-670 K. The maximal coverage of a zeolite surface by NO was estimated from the TPD of NO at approximately 700 K. This allowed the simulation of the dynamics of the adsorbed NO formation at 523 K, which was consistent with the experiments. The adsorbed NO facilitated the atomic oxygen recombination/desorption, the rate determining step during N2O decomposition to O2 and N2, taking place at temperatures > or =563 K.     

NO在氧预吸附Ir(100)表面吸附和解离的第一性原理研究

采用第一性原理密度泛函理论和周期性平板模型研究了NO在O预吸附Ir(100)表面的吸附和解离, 并考察了预吸附的O对可能产物N₂, N₂O和NO₂的选择性的影响. 优化得到反应过程中初态、 过渡态和末态的吸附构型, 并获得反应的势能面信息. 计算结果表明, NO在O预吸附表面最稳定的吸附位是桥位, 其次是顶位. 桥位和顶位的NO在表面存在两条解离通道, 即直接解离通道和由桥位和顶位扩散到平行空位, 继而发生N-O键断裂生成N原子和O原子的解离通道. 此分离机理与洁净表面上NO解离机理相同, 但后一种解离方式优于前一种, 是NO在表面上解离的主要通道. 预吸附的O原子在不同程度上抑制了NO的解离, 导致桥位和顶位NO解离互相竞争. 在O预吸附Ir(100)表面, N₂气是唯一的产物, 不会有副产物N₂O和NO₂的生成, 与实验结果一致. 预吸附的O在N/O低覆盖度下几乎不影响N₂气的生成, 但在较高覆盖度下则促进了N₂气的生成.     

Nitric oxide adsorption and reduction reaction mechanism on the Rh7(+) cluster: a density functional theory study

The transition metal rhodium has been proved the effective catalyst to convert from NO(x) to N(2.) In the present work, we are mainly focused on the NO adsorption and decomposition reaction mechanism on the surface of the Rh(7)(+) cluster, and the calculated results suggest that the reaction can proceed via three steps. First, the NO can adsorb on the surface of the Rh(7)(+) cluster; second, the NO decomposes to N and O atoms; finally, the N atom reacts with the second adsorbed NO and reduces to a N(2) molecule. The N-O bond breaks to yield N and O atoms in the second step, which is the rate-limiting step of the whole catalytic cycle. This step goes over a relatively high barrier (TS(12)) of 39.6 kcal/mol and is strongly driven by a large exothermicity of 55.1 kcal/mol during the formation of stable compound 3, accompanied by the N and O atoms dispersed on the different Rh atoms of the Rh(7)(+) cluster. In addition, the last step is very complex due to the different possibilities of reaction mechanism. On the basis of the calculations, in contrast to the reaction path II that generates N(2) from two nitrogen atoms coupling, the reaction path I for the formation of intermediate N(2)O is found to be energetically more favorable. Present work would provide some valuable fundamental insights into the behavior of the nitric oxide adsorption and reduction reaction mechanism on the Rh(7)(+) cluster.     

Comprehensive DFT study of nitrous oxide decomposition over Fe-ZSM-5

The reaction mechanism for nitrous oxide decomposition has been studied on hydrated and dehydrated mononuclear iron sites in Fe-ZSM-5 using density functional theory. In total, 46 different surface species with different spin states (spin multiplicity M(S) = 4 or 6) and 63 elementary reactions were considered. Heats of adsorption, activation barriers, reaction rates, and minimum energy pathways were determined. The approximate minimum energy pathways and transition states were calculated using the "growing string method" and a modified "dimer method". Spin surface crossing (e.g., O(2) desorption) was considered. The minimum potential energy structure on the seam of two potential energy surfaces was determined with a multiplier penalty function algorithm by Powell and approximate rates of spin surface crossings were calculated. It was found that nitrous oxide decomposition is first order with respect to nitrous oxide concentration and zero order with respect to oxygen concentration. Water impurities in the gas stream have a strong inhibiting effect. In the concentration range of 1-100 ppb, the presence of water vapor influences the surface composition and the apparent rate coefficient. This is especially relevant in the temperature range of 600-700 K where most experimental kinetic studies are performed. Apparent activation barriers determined over this temperature range vary from 28.4 (1 ppb H(2)O) to 54.8 kcal/mol (100 ppb H(2)O). These results give an explanation why different research groups and different catalyst pretreatments often result in very different activation barriers and preexponential factors. Altogether perfect agreement with experimental results could be achieved.     

Screening by kinetic Monte Carlo simulation of Pt-Au(100) surfaces for the steady-state decomposition of nitric oxide in excess dioxygen

An ab initio-based kinetic Monte Carlo algorithm was developed to simulate the direct decomposition of NO over Pt and different PtAu alloy surfaces. The algorithm was used to test the influence of the composition and the specific atomic surface structure of the alloy on the simulated activity and selectivity to form N2. The apparent activation barrier found for the simulation of lean NO decomposition over Pt(100) was 7.4 kcal/mol, which is lower than the experimental value of 11 kcal/mol that was determined over supported Pt nanoparticles. Differences are likely due to differences in the surface structure between the ideal (100) surface and supported Pt particles. The apparent reaction orders for lean NO decomposition over the Pt(100) substrate were calculated to be 0.9 and -0.5 for NO and O2, respectively. Oxygen acts to poison Pt. Simulations on the different Pt-Au(100) surface alloys indicate that the turnover frequency goes through a maximum as the Au composition in the surface is increased, and the maximum occurs near 44% Au. Turnover frequencies, however, are dictated by the actual arrangements of Pt and Au atoms in the surface rather than by their overall composition. Surfaces with similar compositions but different alloy arrangements can lead to very different activities. Surfaces composed of 50% Pt and 50% Au (Pt4 and Au4 surface ensembles) showed very little enhancement in the activity over that which was found over pure Pt. The Pt-Pt bridge sites required for NO adsorption and decomposition were still effectively poisoned by atomic oxygen. The well-dispersed Pt(50%)Au(50%) alloy, on the other hand, increased the TOF over that found for pure Pt by a factor of 2. The most active surface alloy was one in which the Pt was arranged into "+" ensembles surrounded by Au atoms. The overall composition of this surface is Pt(56.2%)Au(43.8%). The unique "+" ensembles maintain Pt bridge sites for NO to adsorb on but limit O2 as well as NO activation by eliminating next-nearest neighbor Pt-bridge sites. The repulsive interactions between two adatoms prevent them from sharing the same metal atoms. The decrease in the oxygen coverage leads to a greater number of vacant sites available for NO adsorption. This increases the NO coupling reaction and hence N2 formation. The inhibition of the rate of N2 formation by O2 is therefore suppressed. The coverage of atomic oxygen decreases from 53% on the Pt(100) surface down to 19% on the "+" ensemble surface. This increases the rate of N2 formation by a factor of 4.3 over that on pure Pt. The reaction kinetics over the "+" ensemble Pt(56.2%)Au(43.8%) surface indicate apparent reaction orders in NO and oxygen of 0.7 and 0.0, respectively. This suggests that oxygen does not poison the PtAu "+" alloy ensemble. The activity and selectivity of the PtAu ensembles significantly decrease for alloys that go beyond 60% Au. Higher coverages of Au shut down sites for NO adsorption and, in addition, weaken the NO and O bond strengths, which subsequently promotes desorption as well as NO oxidation. The computational approach identified herein can be used to more rapidly test different metal compositions and their explicit atomic arrangements for improved catalytic performance. This can be done "in silico" and thus provides a method that may aid high-throughput experimental efforts in the design of new materials. The synthesis and stability of the metal complexes suggested herein still ultimately need to be tested.     

Activation energy for thermal decomposition of nitric oxide

Variation of the reaction mechanism for homogeneous thermal decomposition of NO into N₂ and O₂ in the temperature range between 1000 and 4000 K is studied. The decomposition always proceeds through an atomic chain mechanism initiated by formation of oxygen atom. However the step of the oxygen atom initiation depends on the reaction condition, i.e., collision between two NO molecules at low conversions (when P_O2/P_NO ratio≪ ≪ 1) and collision between NO and O₂ and/or unimolecular decomposition of O₂ at high conversions (after substantial O₂ has been accumulated from the reaction). In this study, apparent activation energy (E_app) of the decomposition reaction has been theoretically determined on the basis of our proposed mechanisms. The E_app thus determined varies widely (from 254 to 401 kJ mol⁻¹) with the accepted step of initiation. This variation can account for the variations among experimental activation energies for the decomposition reaction in the literature. © 1996 John Wiley & Sons, Inc.     

Cluster size-dependent mechanisms of the CO + NO reaction on small Pdn (n < or = 30) clusters on oxide surfaces

The CO + NO reaction (2CO + 2NO --> N(2) + 2CO(2)) on small size-selected palladium clusters supported on thin MgO(100) films reveals distinct size effects in the size range Pd(n) with n < or = 30. Clusters up to the tetramer are inert, while larger clusters form CO(2) at around 300 K, and this main reaction mechanism involves adsorbed CO and an adsorbed oxygen atom, a reaction product from the dissociation of NO. In addition, clusters consisting of 20-30 atoms reveal a low-temperature mechanism observed at temperatures below 150 K; the corresponding reaction mechanism can be described as a direct reaction of CO with molecularly adsorbed NO. Interestingly, for all reactive cluster sizes, the reaction temperature of the main mechanism is at least 150 K lower than those for palladium single crystals and larger particles. This indicates that the energetics of the reaction on clusters are distinctly different from those on bulklike systems. In the presented one-cycle experiments, the reaction is inhibited when strongly adsorbed NO blocks the CO adsorption sites. In addition, the obtained results reveal the interaction of NO with the clusters to show differences as a function of size; on larger clusters, both molecularly bonded and dissociated NO coexist, while on small clusters, NO is efficiently dissociated, and hardly any molecularly bonded NO is detected. The desorption of N(2) occurs on the reactive clusters between 300 and 500 K.     

Structure and nuclearity of active sites in Fe-zeolites: comparison with iron sites in enzymes and homogeneous catalysts

Fe-ZSM-5 and Fe-silicalite zeolites efficiently catalyse several oxidation reactions which find close analogues in the oxidation reactions catalyzed by homogeneous and enzymatic compounds. The iron centres are highly dispersed in the crystalline matrix and on highly diluted samples, mononuclear and dinuclear structures are expected to become predominant. The crystalline and robust character of the MFI framework has allowed to hypothesize that the catalytic sites are located in well defined crystallographic positions. For this reason these catalysts have been considered as the closest and best defined heterogeneous counterparts of heme and non heme iron complexes and of Fenton type Fe(2+) homogeneous counterparts. On this basis, an analogy with the methane monooxygenase has been advanced several times. In this review we have examined the abundant literature on the subject and summarized the most widely accepted views on the structure, nuclearity and catalytic activity of the iron species. By comparing the results obtained with the various characterization techniques, we conclude that Fe-ZSM-5 and Fe-silicalite are not the ideal samples conceived before and that many types of species are present, some active and some other silent from adsorptive and catalytic point of view. The relative concentration of these species changes with thermal treatments, preparation procedures and loading. Only at lowest loadings the catalytically active species become the dominant fraction of the iron species. On the basis of the spectroscopic titration of the active sites by using NO as a probe, we conclude that the active species on very diluted samples are isolated and highly coordinatively unsaturated Fe(2+) grafted to the crystalline matrix. Indication of the constant presence of a smaller fraction of Fe(2+) presumably located on small clusters is also obtained. The nitrosyl species formed upon dosing NO from the gas phase on activated Fe-ZSM-5 and Fe-silicalite, have been analyzed in detail and the similarities and differences with the cationic, heme and non heme homogeneous counterparts have been evidenced. The same has been done for the oxygen species formed by N(2)O decomposition on isolated sites, whose properties are more similar to those of the (FeO)(2+) in cationic complexes (included the [(H(2)O)(5)FeO](2+)"brown ring" complex active in Fenton reaction) than to those of ferryl groups in heme and non heme counterparts.     

Selective Oxygen Transfers with Iron(III) Porphyrin Nitrite

The reaction of octaethylporphyrin iron(III) chloride with potassium crown ether (18-crown-6) nitrite in N-methylpyrrolidone-1% acetic acid under argon generates the iron(III) nitrite salt (PFeNO(2)). The latter is a unique and selective oxygen atom transfer reagent. The reaction of a broad range of substrates (S) proceeds quantitatively to yield the oxidized substrate and the iron(II) porphyrin-nitrosyl adduct: PFeNO(2) + S --> PFeNO + SO. Diatomic molecules to which oxygen is directly transferred from PFeNO(2) are NO, CO, and O(2). The conversion NO to NO(2) is shown via (15)NO(2)(-) labeling experiments to proceed exclusively by the O atom transfer process. The ozone, generated from dioxygen, was trapped with nitrite ion and the two olefins 2-methyl-2 butene and 2,3-dimethyl-2 butene. These substances are inert to PFeNO(2) under argon. However, in an oxygen-saturated reaction mixture, nitrite produced nitrate. The olefins, following reduction of the reaction mixture with Zn/HOAc, yielded 1 mol of acetone and acetaldehyde and 2 mol of acetone, respectively. Other simple O atom transfers under argon were observed with dimethyl sulfide and triphenylphosphine. The PFeNO(2) reagent shows a preference for O insertion into allylic, benzylic, and aldehydic C-H bonds. Thus, no olefin containing these moieties is epoxidized. However, styrene and cis-stilbene are converted to styrene oxide and cis-stilbene oxide, respectively. The double oxidation of allylbenzene to trans-cinnamaldehyde entails an allylic rearrangement that suggests radical character to the O insertion process. However, no kinetic evidence for this was obtained. The reaction is an overall third-order process, rate = k(PFe(III))(NO(2)(-))(S). There was no correlation of observed rates with relevant C-H bond dissociation energies of substrates. The fastest reacting substrate was nitric oxide (k(22) degrees = 52 M(-)(2) s(-)(1)) and the slowest was toluene (k(50) degrees = 6.3 x 10(-)(4) M(-)(2) s(-)(1)). The range and selectivity of these O atom transfers sets them apart from the catalytic oxidations brought about by reactions of iron(III) porphyrins with peroxides, iodosoaryls, hypochlorite, and other oxidants. The driving force for the relatively mild oxidations with PFeNO(2) resides in the thermodynamic stability of the heme-NO adduct. Given the broad presence of nitrite in the environment and the ubiquity of porphyrins in the biosphere, the activation of nitrite by iron porphyrins has both an environmental and biochemical significance.     

Coordination chemistry of the soluble metal oxide analogue [Mo5O13(OCH3)4(NO)]3- with manganese carbonyl species

The reactions of neutral or cationic manganese carbonyl species towards the oxo-nitrosyl complex [Na(MeOH)[Mo(5)O(13)(OCH(3))(4)(NO)]](2-) have been investigated in various conditions. This system provides an unique opportunity for probing the basic reactions involved in the preparation of solid oxide-supported heterogeneous catalysts, that is, mobility of transition-metal species at the surface and dissolution-precipitation of the support. Under nitrogen and in the dark, the reaction of in situ generated fac-[Mn(CO)(3)](+) species with (nBu(4)N)(2)[Na(MeOH)-[Mo(5)O(13)(OMe)(4)(NO)]] in MeOH yields (nBu(4)N)(2)[Mn(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] at room temperature, while (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)] is obtained under reflux. The former transforms into the latter under reflux in methanol in the presence of sodium bromide; this involves the migration of the fac-[Mn(CO)(3)](+) moiety from a basal kappa(2)O coordination site to a lateral kappa(3)O site. Oxidation and decarbonylation of manganese carbonyl species as well as degradation of the oxonitrosyl starting material and reaggregation of oxo(methoxo)molybdenum fragments occur in non-deareated MeOH, and both (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)] and (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] as well as (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been obtained in this way. The rhenium analogue (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] has also been synthesized. The crystal structures of (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]], (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] and (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been determined.     

O atom transfer from nitric oxide catalyzed by Fe(TPP).

The reaction of NO-Fe(TPP) with low pressures of NO gas proceeds through three distinct transformations, the first of which we suggest is the formation of an N--N-coupled, (NO)(2) adduct intermediate. The subsequent formation of NO(NO(2))Fe(TPP), which under these conditions readily loses NO, suggests that it is formed by addition of free NO(2) to the starting nitrosyl. A mechanism is proposed which implies that the addition of a competitive O atom acceptor would lead to catalytic production of N(2)O. In agreement with the proposed mechanism, the formation of N(2)O is decoupled from the formation of the nitrite by using PPh(3) as the competitive acceptor. The mechanism of O atom transfer was examined by cross-labeling experiments, which show that both O atoms in the intermediate are equivalent, even under catalytic conditions. The formation of an intermediate was confirmed by IR spectroscopy of the heterogeneous reaction of an NO-Fe(TPP) film with gaseous NO, in which transient, isotope-sensitive nu(NO) bands are seen prior to NO(NO(2))Fe(TPP) formation. Mixed (14)N/(15)N label experiments demonstrate coupling between the two bound nitrosyls in the transient species.     

Role of adsorbed NO in N2O decomposition over iron-containing ZSM-5 catalysts at low temperatures

Transient response and temperature-programmed desorption/reaction (TPD/TPR) methods were used to study the formation of adsorbed NO(x) from N2O and its effect during N2O decomposition to O2 and N2 over FeZSM-5 catalysts at temperatures below 653 K. The reaction proceeds via the atomic oxygen (O)(Fe) loading from N2O on extraframework active Fe(II) sites followed by its recombination/desorption as the rate-limiting step. The slow formation of surface NO(x,ads) species was observed from N2O catalyzing the N2O decomposition. This autocatalytic effect was assigned to the formation of NO(2,ads) species from NO(ads) and (O)(Fe) leading to facilitation of (O)(Fe) recombination/desorption. Mononitrosyl Fe2+(NO) and nitro (NO(2,ads)) species were found by diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) in situ at 603 K when N2O was introduced into NO-containing flow passing through the catalyst. The presence of NO(x,ads) does not inhibit the surface oxygen loading from N2O at 523 K as observed by transient response. However, the reactivity of (O)(Fe) toward CO oxidation at low temperatures (<523 K) is drastically diminished. Surface NO(x) species probably block the sites necessary for CO activation, which are in the vicinity of the loaded atomic oxygen.     

Selective photoreduction of nitric oxide to nitrogen by nanostructured TiO2 photocatalysts: role of oxygen vacancies and iron dopant

Conventional TiO(2)-based photocatalysts oxidize NO(x) to nitrate species, which do not spontaneously desorb and therefore deactivate the catalyst. We show that the selectivity of this reaction can be changed by creating a large concentration of oxygen vacancies in TiO(2) nanoparticles through thermal reduction in a reducing atmosphere. This results in the photoreduction of nitric oxide (NO) to N(2) and O(2), species which spontaneously desorb at room temperature. The activity of the photoreduction reaction can be greatly enhanced by doping the TiO(2) nanoparticles with Fe(3+), an acceptor-type dopant that stabilizes the oxygen vacancies. Moreover, the photoinduced reduction of Fe(3+) to Fe(2+) provides a recombination pathway that almost completely suppresses the formation of NO(2) and thus enhances the selectivity of the reaction for N(2) formation. Gas chromatography confirms that N(2) and O(2) are formed in a stoichiometric ratio, and the activity for NO decomposition is found to be limited by the concentration of oxygen vacancies. A series of internally consistent reaction equations are proposed that describe all experimentally observed features of the photocatalytic process. The observed influence of oxygen vacancies on the activity and selectivity of photoinduced reactions may lead to new routes toward the design of highly selective photocatalysts.     

Pt/HM,Pd/HM催化剂上NO-TPSR和CO-NO反应

消除NO对大气的污染，人们进行了广泛的研究，其中选择性催化还原是常用的方法[1]．众所周知，分子筛是常用的NO选择性还原催化剂载体，熊金保等[2]考察了Cu-ZSM-5催化剂表面NO的程脱产物，认为NO只吸附在Cu上，载体ZSM-5不吸附NO，Alvarez等[3]认为Na－ZSM-5和NaY表面有少量吸     

Reactions of nitrogen oxides with heme models. Characterization of NO and NO2 dissociation from Fe(TPP)(NO2)(NO) by flash photolysis and rapid dilution techniques: Fe(TPP)(NO2) as an unstable intermediate

Described are studies directed toward elucidating the controversial chemistry relating to the solution phase reactions of nitric oxide with the iron(II) porphyrin complex Fe(TPP)(NO) (1, TPP = meso-tetraphenylporphinato2-). The only reaction observable with clean NO is the formation of the diamagnetic dinitrosyl species Fe(TPP)(NO)2 (2), and this is seen only at low temperatures (K(1) < 3 M(-1) at ambient temperature). However, 1 does readily react reversibly with N2O3 in the presence of excess NO to give the nitro nitrosyl complex Fe(TPP)(NO2)(NO) (3), suggesting that previous claims that 1 promotes NO disproportionation to give 3 may have been compromised by traces of air in the nitric oxide sources. It is also noted that 3 undergoes reversible loss of NO to give the elusive nitro species Fe(TPP)(NO2) (4), which has been implicated as a powerful oxygen atom transfer agent in reactions with various substrates. Furthermore, in the presence of excess NO2, the latter undergoes oxidation to the stable nitrato analogue Fe(TPP)(NO3) (5). Owing to such reactivity of Fe(TPP)(NO2), flash photolysis and stopped-flow kinetics rather than static techniques were necessary for the accurate measurement of dissociation equilibria characteristic of Fe(TPP)(NO2)(NO) in 298 K toluene solution. Flash photolysis of 3 resulted in competitive NO2 and NO dissociation to give Fe(TPP)(NO) and Fe(TPP)(NO2), respectively. The rate constant for the reaction of 1 with N2O3 to generate Fe(TPP)(NO2)(NO) was determined to be 1.8 x 10(6) M(-1) s(-1), and that for the NO reaction with 4 was similarly determined to be 4.2 x 10(5) M(-1) s(-1). Stopped-flow rapid dilution techniques were used to determine the rate constant for NO dissociation from 3 as 2.6 s(-1). The rapid dilution experiments also demonstrated that Fe(TPP)(NO2) readily undergoes further oxidation to give Fe(TPP)(NO3). The mechanistic implications of these observations are discussed, and it is suggested that NO2 liberated spontaneously from Fe(P)(NO2) may play a role in an important oxidative process involving this elusive species.     

预吸附氧对NO在Pt(110)表面吸附和分解的影响

 利用程序升温反应谱、X射线光电子能谱和高分辨电子能量损失谱研究了NO在清洁和预吸附氧的Pt(110)表面的吸附和分解. 在清洁的Pt(110)表面,室温下低覆盖度时NO以桥式吸附为主,高覆盖度时NO以线式吸附为主. 加热过程中部分NO(主要是桥式吸附物种)分解,生成N2和N2O. 室温下O2在Pt(110)表面发生解离吸附. Pt(110)表面预吸附氧会抑制桥式吸附NO的生成,并导致其脱附温度降低40 K. 降低脱附温度有利于桥式吸附NO的分子脱附,从而抑制分解反应. 这些结果从表面化学的角度合理地解释了铂催化剂在富氧条件下对NO分解能力的降低.     

Infrared-induced reactivity of N2O on small gas-phase rhodium clusters

Far- and mid-infrared multiple photon dissociation spectroscopy has been employed to study both the structure and surface reactivity of isolated cationic rhodium clusters with surface-adsorbed nitrous oxide, Rh(n)N(2)O(+) (n = 4-8). Comparison of experimental spectra recorded using the argon atom tagging method with those calculated using density functional theory (DFT) reveals that the nitrous oxide is molecularly bound on the rhodium cluster via the terminal N-atom. Binding is thought to occur exclusively on atop sites with the rhodium clusters adopting close-packed structures. In related, but conceptually different experiments, infrared pumping of the vibrational modes corresponding with the normal modes of the adsorbed N(2)O has been observed to result in the decomposition of the N(2)O moiety and the production of oxide clusters. This cluster surface chemistry is observed for all cluster sizes studied except for n = 5. Plausible N(2)O decomposition mechanisms are given based on DFT calculations using exchange-correlation functionals. Similar experiments pumping the Rh-O stretch in Rh(n)ON(2)O(+) complexes, on which the same chemistry is observed, confirm the thermal nature of this reaction.