Palladacycle-catalyzed cross-coupling reactions of arylboronic acids with carboxylic anhydrides or acyl chlorides

The triphenylphosphine–cyclopalladated ferrocenylimine (Cat. 2) exhibited highly catalytic activity for the both of arylboronic acids with carboxylic anhydrides and acyl chlorides with low catalyst loading (0.5 mol %). The reactions were unaffected by the presence of electron-releasing and electron-withdrawing substituents in both the arylboronic acids and carboxylic derivatives. Up to 98% yield was obtained for 32 examples. However, they were limited for arylboronic acid with strong electron-withdrawing groups. It is noting that catalyst 2 can be reused for eight times without losing its catalytic activity.     

The palladium-catalyzed cross-coupling reaction of carboxylic anhydrides with arylboronic acids: a DFT study

The mechanism of the cross-coupling of phenylboronic acid with acetic anhydride, a viable model of the widely used Suzuki reaction, has been studied by DFT calculations at the BP86/6-31G level of theory. Two alternative catalytic cycles have been investigated, one starting from a neutral Pd(0)L(2) complex, the other from an anionic "Jutand-type" [Pd(0)L(2)X](-) species. The reaction profiles are in good agreement with the experimental findings, as both pathways require only moderate activation energies. Both pathways are dominated by cis-configured square-planar palladium(II)diphosphine intermediates. Despite careful investigations, we did not find in this model reaction any evidence for five-coordinate palladium(II) intermediates, which are commonly believed to cause the profound effects of counterions in palladium-catalyzed transformations. Instead, our calculations suggest that the higher catalytic activity of anionic complexes, such as [Pd(PMe(3))(2)OAc](-), may arise from their stronger ability to coordinate to carbon electrophiles. The transmetalation sequence is the same for both catalytic cycles, involving the dissociation of one phosphine ligand from the palladium. In the decisive transition state, in which the phenyl group is transferred from boron to palladium, the acetate base is found to be in a bridging coordination between these two atoms.     

Ni-catalyzed cross-coupling reaction of aryl chlorides with arylboronic acids in IPA without using a reducing reagent

The coupling reaction of aryl chlorides with arylboronic acids was successfully performed in isopropanol (IPA) by using [NiCl(Ph₂PCH₂CH₂OH)₂(H₂O)]Cl (5), a cationic Ni(II)-complex, as a precatalyst in the absence of a reducing agent. The coupling reaction proceeded smoothly under mild conditions to provide biaryls in satisfactory to excellent yields, and formation of the undesired dechlorination products of aryl chlorides was completely prevented.     

Palladium-catalyzed coupling reaction of propargylic oxiranes with arylboronic acids in aqueous media

A novel type of coupling reaction has been developed by the palladium-catalyzed reaction of propargylic oxiranes with arylboronic acids, in which anti-substituted 4-aryl-2,3-allenols were produced in a highly diastereoselective manner. A chiral-substituted allene has been synthesized from the reaction of a chiral propargylic oxirane without loss of the chirality.     

Phosphine-free Suzuki-Miyaura cross-coupling in aqueous media enables access to 2-C-aryl-glycosides

A general strategy for the synthesis of 2-aryl-glycals and their elaboration to 2-C-aryl-α-glycosides and 1,5-anhydro-2-C-aryl-2-deoxy alditols are described. The use of reliable, efficient phosphine-free Suzuki-Miyaura cross-coupling of 2-iodoglycals in aqueous media as a key step proceeds with complete regioselectivity at C-2 and enables access to 2-aryl-glycals with different configurations in excellent yields.     

Palladium-phosphinous acid-catalyzed cross-coupling of aliphatic and aromatic acyl chlorides with boronic acids

The cross-coupling of aromatic and aliphatic acyl chlorides with arylboronic acids in the presence of 2.5 mol % of (t-Bu₂POH)₂PdCl₂ (POPd) provides rapid access to ketones that are obtained in up to 93% yield. This palladium-phosphinous acid-catalyzed reaction is completed within 10 min when microwave irradiation is used, and it overcomes typical drawbacks of Friedel-Crafts acylation procedures such as harsh reaction conditions, untunable regiocontrol, and low substrate scope.     

Rhodium-catalyzed regioselective cross-coupling of styrene oxides with arylboronic acids in aqueous γ-valerolactone

A simple and regioselective cross-coupling of styrene oxides with arylboronic acids in the presence of Rh(PPh₃)₃Cl in biomass-derived γ-valerolactone has been developed. The reactions proceeded smoothly to give 1,2-diaryl ethanols as the predominant products in moderate to good yields.     

Palladium-catalyzed cross-coupling reactions of carboxylic anhydrides with organozinc reagents

[reaction: see text] Negishi-type cross-coupling reaction was effected by employing organozincs and anhydrides or mixed anhydrides that formed in situ from sodium salts of the corresponding acids and ethyl chloroformate under the catalysis of palladium(0). A general method for preparing symmetrical/unsymmetrical ketones was developed.     

First cross-coupling reaction of potassium aryltrifluoroborates with organic chlorides in aqueous media catalyzed by an oxime-derived palladacycle

Potassium aryltrifluoroborates are cross-coupled with aryl and heteroaryl chlorides using a 4-hydroxyacetophenone oxime-derived palladacycle as precatalyst, K2CO3 as base, and TBAB as additive in refluxing water under conventional and microwave heating affording the corresponding biphenyls under phosphine-free conditions. For the arylation of allyl and benzyl chlorides, KOH is used as base in acetone-water (3:2) at rt or 50 degrees C using 0.1 mol % Pd loading providing allylbenzenes and diarylmethanes, respectively.     

Cucurbit[7]uril promoting PdCl2-catalyzed cross-coupling reaction of benzyl halides and arylboronic acids in aqueous media

The research provides a novel approach for producing diarylmethane derivatives using CB[7]–NaCl–PdCl₂ catalyzed Suzuki cross-coupling reaction of benzyl chloride derivatives and arylboronic acids in ethanol aqueous solution.     

Diaminophosphine oxides as preligands for Ni-catalyzed Suzuki cross-coupling reactions of aryl chlorides with arylboronic acids

The first investigation of air- and moisture-stable diaminophosphine oxides as preligands in the Ni-catalyzed Suzuki cross-coupling reactions of aryl chlorides with arylboronic acids has been reported. The results show that under the optimized reaction conditions, the new catalytic system with a Ni(II) σ-aryl complex as precatalyst and a diaminophosphine oxide as preligand tolerates a variety of functional groups and is efficient for both electron-rich and electron-deficient aryl chlorides, though it shows higher efficiency for activated arylboronic acids than deactivated ones. Steric effects were observed for both aryl chlorides and arylboronic acids.     

A convenient method for preparing aromatic ketones from acyl chlorides and arylboronic acids via Suzuki-Miyaura type coupling reaction

Aromatic ketones are synthesized efficiently via palladium-catalyzed cross-coupling reaction of boronic acids with acyl chlorides in the presence of K₃PO₄ hydrate in toluene. This allows the use of aliphatic acyl chlorides as the starting material. Hydrated water plays a significant role as an H₂O source to activate the catalytic system.     

Microwave-promoted cross-coupling of acid chlorides with arylboronic acids: a convenient method for preparing aromatic ketones

Simple catalytic systems for cross-coupling reactions of acyl chlorides with arylboronic acids under microwave conditions were tested. Microwave irradiation facilitated the reaction course. Mild reaction conditions afford the symmetrical and unsymmetrical aryl ketones in reasonable to high yields within a short time. A wide range of substrates bearing an electron-donating or an electron-withdrawing substituent on aryl ring of acid chloride as well as on boronic acid were examined and high yields of ketones were produced.     

Palladium-catalyzed decarboxylative coupling of isatoic anhydrides with arylboronic acids

The decarboxylative coupling of isatoic anhydrides with arylboronic acids was realized for the first time in the presence of Pd(2)(dba)(3) and DPEphos, achieving aryl o-aminobenzoates with yields ranging from moderate to good. The efficiency of this procedure was demonstrated by good compatibility with fluoro, chloro, bromo, nitro, cyano, trifluoromethyl, formacyl, acetyl, thienyl, and naphthyl groups. Preliminary mechanistic experiments using deuterium labeling showed that the oxygen atom was derived from dioxygen.     

Suzuki-type cross-coupling reaction of pentavalent triarylantimony diacetates with arylboronic acids without a base

Novel base-free Suzuki-type cross-coupling reaction by the use of triarylantimony diacetates and arylboronic acids in the presence of Pd(PPh₃)₄ catalyst led to the formation of biaryl derivatives in moderate to excellent yields. The reaction is applicable to a variety of arylboronic acids bearing base-sensitive functional groups.     

Semimicrodetermination of carboxylic acids in the presence of large amounts of acyl chlorides

A procedure for the semimicrodetermination of carboxylic acids in the presence of a large excess of acyl chloride is described. Acyl chloride is first reacted with m-chloroaniline. The m-chloroaniline hydrochloride and carboxylic acid are then determined sequentially by potentiometric titration with sodium hydroxide. Titrations are performed in 80–90% p-dioxane to enhance the potentiometric breaks. With 0.05 N sodium hydroxide, as little as 0.01 mM of carboxylic acid can be determined.     

Suzuki cross-coupling of solid-supported chloropyrimidines with arylboronic acids

The utility of the Suzuki cross-coupling to synthesize biaryl compounds is expanded herein to include reactions of resin-supported chloropyrimidines with boronic acids. In particular, an efficient method is described for the synthesis of a library of biaryl compounds from solid-supported chloropyrimidines. The Suzuki reaction was performed in an inert atmosphere using Pd(2)(dba)(3)/P(t-Bu)(3) as catalyst, spray-dried KF as base, and THF as solvent. The reaction was allowed to proceed overnight at 50 degrees C. Upon cleavage with acid, a library of 4-(substituted amino)-6-arylpyrimidines was obtained in moderate yield and high purity.     

Suzuki-Miyaura cross-coupling of benzylic carbonates with arylboronic acids

The cross-coupling of benzylic carbonates with arylboronic acids gave the corresponding diarylmethanes in high yields by use of the palladium catalyst generated in situ from [Pd(eta(3)-C(3)H(5))Cl](2) and 1,5-bis(diphenylphosphino)pentane (DPPPent). The Suzuki-Miyaura reaction using DPPPent-palladium catalyst is applicable to syntheses of a broad range of functionalized diarylmethanes. [reaction: see text]     

Suzuki-Miyaura cross-coupling of benzylic phosphates with arylboronic acids

[reaction: see text] Suzuki-Miyaura cross-coupling of benzylic phosphates with arylboronic acids was investigated. Optimum conditions employed the simple catalytic system of palladium(II) acetate (1 mol %) and triphenylphosphine (4 mol %) with either potassium phosphate or potassium carbonate as the base and toluene as the solvent at 90 degrees C. Using the developed conditions, a series of structurally diverse diarylmethanes were prepared.