A novel three-dimensional mixed bridging–ligand complex with an unexpected 1,3-diaminopropane bridge

Reaction of K₃[Fe(CN)₆] with [Cu(tn)₂](ClO₄)₂ (tn=1,3-diaminopropane) leads to a novel mixed cyano and tn bridged three-dimensional (3D) bimetallic assembly (1), in which each [Fe(CN)₆]⁴⁻ anion connects six copper(II) cations via six CN⁻ groups, whereas each copper(II) cation is linked to three [Fe(CN)₆]⁴⁻ ions and two other copper(II) ions through Cu–NC–Fe and Cu–tn–Cu linkages, respectively. Magnetic studies reveal weak antiferromagnetic interactions between the nearest Cu^II (S=1/2) ions through the diamagnetic [Fe(CN)₆]⁴⁻ anion.     

Electronic Structure and Molecular Properties of the Mixed Rhenium–Molybdenum [Re6−x Mo x S8(CN)6]q−, (x = 0 to 6) Clusters

Relativistic density functional calculations including scalar and spin-orbit effects via the ZORA approximation and including solvent effects were carried out on the [Re₆S₈(CN)₆]⁴⁻, [Re₅MoS₈(CN)₆]⁵⁻, [Re₄Mo₂S₈(CN)₆]⁵⁻, [Re₃Mo₃S₈(CN)₆]⁵⁻, [Re₂Mo₄S₈(CN)₆]⁵⁻, [ReMo₅S₈(CN)₆]⁵⁻ and [Mo₆S₈(CN)₆]⁶⁻ clusters. By increasing the replacement of each Re atom with Mo atoms we find that for x > 2 the HOMO–LUMO gap decreases significantly. The calculated gap of the [Re₃Mo₃S₈(CN)₆]⁵⁻, [Re₂Mo₄S₈(CN)₆]⁵⁻ and [ReMo₅S₈(CN)₆]⁵⁻ clusters is similar to the calculated and observed gap of the superconducting PbMo₆S₈ Chevrel phases. The current calculations also indicates that the electronic similarities of the lowest excited states of the semiconducting 24e [Re₅MoS₈(CN)₆]⁵⁻ and 23e [Re₄Mo₂S₈(CN)₆]⁵⁻ clusters with the strongly luminescent 24e [Re₆S₈(CN)₆]⁴⁻ cluster, suggest that these mixed metal clusters might be luminescent.     

Determination of total iron in fresh waters using flow injection with potassium permanganate chemiluminescence detection

A flow injection method is described for the determination of iron in fresh water based on potassium permanganate chemiluminescence detection via oxidation of formaldehyde in aqueous hydrochloric acid. Total iron concentrations are determined after reducing Fe(III) to Fe(II) using hydroxylamine hydrochloride. The detection limit (three standard deviations of blank) is 1.0 nM, with a sample throughput of 120 h⁻¹. The calibration graph was linear over the range (2–10) × 10⁻⁷ M (r ² = 0.9985) with relative standard deviations (n = 5) in the range 1.0–2.3%. The effect of interfering cations (Ca(II), Mg(II), Zn(II), Ni(II), Co(II), Fe(III), Mn(II), Pb(II), and Cu(II)) and common anions (Cl⁻, SO ₄ ²⁻ , PO ₄ ³⁻ , NO ₃ ⁻ , NO ₂ ⁻ , I⁻, F⁻, and SO ₃ ²⁻ ) was studied at their maximum admissible concentrations in fresh water. The method was applied to fresh-water samples from the Quetta Valley, and the results obtained (0.04 ± 0.001–0.11 ± 0.01 mg/L Fe(II)) were in reasonable agreement with those obtained using the spectrophotometric reference method (0.05 ± 0.01–0.12 ± 0.02 mg/L Fe(II)). The text was submitted by the authors in English.     

Crystal structure and magnetic properties of a three-dimensional complex constructed from [CuL]2+ and [Fe(CN)6]3− precursors

Self-assembly of the precursor [Cu(L)]²⁺ (L = 3,10-dipropyl-1,3,5,8,10,12-hexaazacyclotetradecane) with hexacyanometalate [Fe(CN)₆]³⁻ produces a 3-D cyano-bridged Cu(II)–Fe(III) bimetallic assembly, [CuL]₂[Fe(CN)₆]ClO₄ · H₂O (1), characterized by single-crystal X-ray diffraction studies, and magnetic measurements. The crystallographic determination reveals that each hexacyanoferromate(III) ion connects four copper(II) ions using four co-planar CN⁻ groups which axially coordinate to the copper ion in a trans fashion forming trans-CuL(N≡C)₂ moieties in (1). Magnetic studies reveal that (1) displays a ferromagnetic interaction between Cu(II) and Fe(III) through the CN linkage.     

Kinetics of the heterobimetallic complexes formation in the reactions between chromium(III) macrocyclic species and [Fe(CN)<Subscript>6</Subscript>]<Superscript>4−</Superscript> ions

Formation of a singly bridged heterobimetallic Cr^III–NC–Fe^II anation product of the cis − [Cr(cycb)(H₂O)₂]³⁺ and trans − [Cr(cyca)(H₂O)₂]³⁺ complexes, where cyca and cycb are meso- and rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-tetraazacyclotetradecane respectively, by [Fe(CN)₆]⁴⁻ ions is accompanied by an intensive absorbance increase within 390–470 nm due to an intermetal electron transition. A bell-shape of the pseudo-first order rate constants/pH profile observed for the reactions which have been studied under a large excess of the iron(II) complex is in accordance with the highest reactivity of the chromium(III) complexes in their monohydroxomonoaqua forms. The reaction mechanism has been discussed based on the determined rate law.     

The Peltier heat and the standard electrode potential of ferro-ferricyanide couple at 298.15 K determined by electrochemical–calorimetry

An experiment was done on electrochemical–calorimetry to identify the Peltier heats of the ferro-ferricyanide reversible electrode reaction over the concentration range of 0.075–0.3 mol dm⁻³ at 298.15 K. A new approach has been developed to obtain the standard potential of this electrode, which was identified as (+0.3580 ± 0.0030) volt at 298.15 K and compared with previously reported values. An equation derived from the approach is also applied to several standard couples, such as Fe(CN)₆⁻³/Fe(CN)₆⁻⁴, H⁺/H₂, Cu²⁺/Cu, Cl⁻/Hg₂Cl₂,Hg, Fe³⁺/Fe²⁺, and Cl⁻/Cl₂ to determine their respective reaction heats with satisfying results.     

Kinetics of oxidation of N,N-bis(salicylaldehyde-1,2-diaminoethane) cobalt(II) complex by periodate. Evidence for the inhibiting effect of copper(II)

A kinetic study of the oxidation of [Co(H₂L)(H₂O)₂]²⁺ (H₂L = N,N-bis (salicylaldehyde-1,2-diaminoethane) Schiff base) by periodate in aqueous solution was performed over pH (2.3–3.4) range, (0.1–0.5) mol dm⁻³ ionic strength and temperatures 20–35 °C for a range of periodate and complex concentrations. The reaction rate showed a first-order dependence on both reactants and increased with pH over the range studied. The effects of Cu(II) and Fe(II) on the reaction rate were investigated over the (1.0–9.0) × 10⁻⁵ mol dm⁻³ range. The reaction was inhibited as the concentration of Cu(II) increased, and it was independent on Fe(II) concentrations over the ranges studied. An inner-sphere mechanism is proposed for the oxidation pathways of both the protonated and deprotonated Co^II complex species.     

Photoisomerisation in single molecules of nitroprusside embedded in mesopores of xerogels

Photoswitchable hybrid materials are successfully prepared by embedding guanidinium nitroprussides (GuNP, (CN₃H₆)₂[Fe(CN)₅NO]) into mesopores of transparent xerogel monoliths. The such prepared hybrid materials exhibit a higher photostability than the corresponding GuNP solutions, whereby the chemical stability of the [Fe(CN)₅NO]²⁻-anion in titania gel is nearly infinite. By irradiation with light in the blue-green spectral range one nitrosyl isomer is formed by a 180° rotation of the NO ligand changing the Fe–NO into a Fe–ON coordination (SI), which is detected by the shift of the ν(NO) stretching vibration from 1945 cm⁻¹ (Fe–NO) to 1820  cm⁻¹ (Fe–ON). Consequently there is enough space around the NO-ligand for such movement in xerogel mesopores. The embedding in silica xerogels increases the achievable population of the isomeric nitrosyl configuration to about 15% with respect to a single crystalline powder where only 9% are reached.     

A study of YBa2(Cu1?xMex)3O6 + δ (Me = Al, Co, Fe) electrophysical and electrochemical properties

The structure, thermal expansion coefficient, and electroconductivity of YBa₂(Cu_1−x Al _x )₃O_6+δ (x = 0.0–0.9) were studied at 20 to 900°C in air. The most conducting compositions of YBa₂(Cu_1−x Me _x )₃O_6+δ (Me = Al, Co, Fe) were determined. The electrochemical activity of electrodes with the most conducting compositions of YBa₂(Cu_1−x Me _x )₃O_6+δ (Me = Al, Co, Fe) was studied in a wide polarization range in the contact with 0.9ZrO₂ + 0.1Y₂O₃ solid electrolyte in air at the temperatures of 700 to 900°C. Original Russian Text ? V.K. Gil’derman, I.D. Remez, 2009, published in Elektrokhimiya, 2009, Vol. 45, No. 5, pp. 612–615. Published by report at IX Conference “Fundamental Problems of Solid State Ionics”, Chernogolovka, 2008.     

The outer-sphere association of p-sulfonatothiacalix[4]arene with some Co(III) complexes: the effect on their redox activity in aqueous solutions

The effect of the ion-pairing of Co(III) complexes with p-sulfonatothiacalix[4]arene (STCA) on Fe(II)–Co(III) electron transfer rate was evaluated from the analysis and comparison of kinetic data in double Co(III)–Fe(II) and triple Co(III)–Fe(II)—STCA systems at various concentration conditions. Complexes [Co(en)₃]³⁺(1), [Co(en)₂ox]⁺(2), [Co(dipy)₃]³⁺ (3), [Co(His)₂]⁺(4) and [Fe(CN)₆]⁴⁻ were chosen as Co(III) and Fe(II) compounds. The effect of STCA was found to correlate with the association mode. The outer-sphere association with STCA was found to exhibit the insignificant effect on Fe(II)–Co(III) electron transfer k _et constants for complexes 3 and 4 with bulky and rigid chelate rings, while more sufficient inclusion of flexible ethylendiaminate rings of 1 and 2 into the cavity of STCA results in the unusual increase of k _et.     

The directed synthesis and the spectral and magnetic characteristics of a new multispin (S=7/2,T=292 K) trinuclear complex

The new trinuclear complex K{(CoTp^t-Bu)[Fe(CN)₆](CoTp^t-Bu)}, in which the initial structural fragments are linked by CN⁻ bridges, was synthesized by the directed stitching of mononuclear complexes, one of which was [Fe(CN)₆]³⁻ while the other was cobalt(II) tris(3-tert-butyl-l-pyrazolyl)borate ([(CoTp^t-Bu)]⁺). The magnetic moment of K{(CoTp^t-Bu)[Fe(CN)₆](CoTp^t-Bu)} at 292 K was 8.07 μ_β (S=7/2), indicating the absence of antiferromagnetic exchange interactions in the trinuclear complex. Translated from Teoreticheskaya i éksperimental'naya Khimiya, Vol. 34, No. 6, pp. 351–354, November–December, 1998.     

Detection of transferrin isoforms in human serum: comparison of UV and ICP–MS detection after CZE and HPLC separations

Two methods for separation of transferrin (Tf) sialoforms, capillary electrophoresis (CE) and high performance liquid chromatography (HPLC) with conventional UV absorbance detection, have been investigated and compared. First, conditions affecting the separation of the Tf isoforms by capillary zone electrophoresis and HPLC were carefully optimized. The use of 15 mmol L⁻¹ borate buffer (pH 8.4) containing 3 mmol L⁻¹ diaminobutane (DAB) as additive enabled good separation of the Tf isoforms by CE (75 cm×50 μm i.d. fused silica capillary) at 25 kV. In HPLC, a gradient of ammonium acetate (from 0 to 250 mmol L⁻¹ in 45 min) buffered at pH 6 (Tris-HCl) proved suitable for separation of Tf isoforms on a Mono-Q HR 5/5 anion-exchange column. On-line specific detection of the iron associated with the different Tf isoforms, after Fe saturation, by inductively coupled plasma mass spectrometry (ICP–MS) was studied in detail to compare its analytical performance with UV detection. For both CE and HPLC an octapole reaction system (ORS) ICP–MS instrument was used to minimize polyatomic interferences on the ⁵⁶Fe major isotope. Limits of detection of the different isoforms were in the range of 0.02–0.04 μmol L⁻¹ Tf for HPLC–ICP (ORS)–MS. This hybrid technique proved more selective and reliable detection of transferrin isoforms with 2, 3, 4, 5, and 6 sialic acid residues (S₂, S₃, S₄, S₅, and S₆) in real serum samples. Interesting results from iron speciation of Tf in serum from healthy individuals and from pregnant women are given.     

Synthesis,characterization, electrical conductivity,and catalytic studies of some coordination polymers of salen-type schiff base

Coordination polymers of Mn(II), Fe(II), Co(II), Ni(II), Cu(II), Zn(II), and Cd(II) with the salen-type Schiff base 4,4′-bis[(N-ethanesalicylaldehydediamine-5)azo]biphenyl have been prepared and characterized by elemental analyses, IR and electronic spectra, magnetic susceptibility measurements, and thermogravimetric analysis. Thermogravimetric analysis confirms the coordination of H₂O in complexes. The ¹H NMR spectrum of ligand clearly indicates the presence of OH and azomethine groups. The octahedral geometry have been suggested for Mn(II), Fe(II), Co(II), and Ni(II) complexes, and square planar Cu((II), whereas tetrahedral is suggested for Zn(II) and Cd(II) polychelates. Thermal data have been analyzed for kinetic parameters by both Coat-Redfern and Broido methods. Solid-state dc conductivity of ligand and its polychelates was measured in their compressed pellet form over 313–413 K temperature range. Solidstate conductivity lies in the range 4.361 × 10⁻¹¹ to 7.241 × 10⁻¹⁰ Ohm⁻¹ cm⁻¹ indicating their semiconducting behavior. Oxidation of styrene with selected catalysts was tested using H₂O₂ as an oxidant.     

Electrophysical properties of materials based on BaGdCo2O5 + δ

The phase composition, linear thermal expansion coefficient, electroconductivity (in the temperature interval 600–900°C and partial pressures of oxygen 10⁻⁵–0.21 atm) of solid-oxide materials based on gadolinium-barium cobaltite doped with 3d-elements BaGdCo_{2 − x} Me _x O_{5 + δ}, Me = Cu, Fe; x = 0.0, 0.2, …, 2.0 were investigated. The homogeneity regions of samples were established by means of X-ray phase analysis. It was shown that the linear thermal expansion coefficient of cobaltite decreases with an increase in the copper or iron concentration. It was established that the electroconductivity of BaGdCo_{2 − x} Me _x O_{5 + δ} decreases with an increase in x. We concluded that upon a decrease in p(O₂), the electroconductivity of samples first decreases and then reaches a horizontal plateau.     

Synthesis of the active sites of molybdoenzymes: MoO2(VI) and MoO(IV)-dithiolene complexes mimicking enzymatic reactions of sulphite oxidase with saturation kinetics

[Mo^VIO₂(S₂C₂(CN)₂)₂]₂₋ (┘1) and [Mo^IVO(S₂C₂(CN)₂)₂]²⁻ (2) mimick oxidoreductase enzymatic activities of sulphite oxidase with biological electron donor, SO ₃ ²⁻ , andin vitro electron acceptor, [Fe(CN)₆]³⁻, demonstrating proton coupled electron transfer reaction in water and inhibition of the oxidation of (2) in the presence of KCN. The sulphite exidizing system is characterized by substrate saturation kinetics indicating the biological significance of the reactions     

Bis-(bis-(1,3-diaminopropane)-copper(II) Tetracyanonickellate(II)) Tetrahydrate: Preparation, Characterization, and Crystal Structure of a Novel Molecular Tetracyanonickellate

Summary.  [Cu(tn)₂Ni(CN)₄]₂ċ4H₂O and Cu(tn)₂Ni(CN)₄ (tn = 1,3-diaminopropane) were prepared and characterized. The hydrate is unstable on air and readily dehydrates to Cu(tn)₂Ni(CN)₄. Crystal structure analysis of the hydrate at 150 K revealed a novel tetranuclear molecular structure of the tetracyanonickellate. The building elements are two [Cu(tn)₂]²⁺ cations (coordination numbers of Cu: 5 and 6, respectively), two [Ni(CN)₄)²⁻ anions, and crystal water. The two cations are linked by one tetracyanonickellate anion via bridging cyano groups placed in cis positions. The second anion is bound weakly (Cu-N = 2.82 ?) via one μ₂-bridging cyano ligand. The tetranuclear molecules and pairs of solvate water molecules are linked by strong hydrogen bonds, thus forming infinite planes which are linked in the third dimension by considerably weaker hydrogen bonds. Received May 9, 2000. Accepted (revised) August 21, 2000     

Bis -( bis -(1,3-diaminopropane)-copper(II) Tetracyanonickellate(II)) Tetrahydrate: Preparation, Characterization, and Crystal Structure of a Novel Molecular Tetracyanonickellate

 [Cu(tn)₂Ni(CN)₄]₂ċ4H₂O and Cu(tn)₂Ni(CN)₄ (tn = 1,3-diaminopropane) were prepared and characterized. The hydrate is unstable on air and readily dehydrates to Cu(tn)₂Ni(CN)₄. Crystal structure analysis of the hydrate at 150 K revealed a novel tetranuclear molecular structure of the tetracyanonickellate. The building elements are two [Cu(tn)₂]²⁺ cations (coordination numbers of Cu: 5 and 6, respectively), two [Ni(CN)₄)²⁻ anions, and crystal water. The two cations are linked by one tetracyanonickellate anion via bridging cyano groups placed in cis positions. The second anion is bound weakly (Cu-N = 2.82 ?) via one μ₂-bridging cyano ligand. The tetranuclear molecules and pairs of solvate water molecules are linked by strong hydrogen bonds, thus forming infinite planes which are linked in the third dimension by considerably weaker hydrogen bonds.     

Compounds of the [PMo12O40]3− anion with surfactant cations forming nanoperiodic structures

Phosphomolybdic acid forms compounds with surfactant cations in acid aqueous media (pH 1.0–2.5) to give compounds A₃[PMo₁₂O₄₀] or Etn₃[PMo₁₂O₄₀]₂·nEtnCl₂ (n=0−3) with various nanoperiodicity depending on the surfactant and synthesis conditions. L. V. Pisarzhevskii Institute of Physical Chemistry, National Academy of Sciences of Ukraine, 31 Prospekt Nauki, Kiev 252039, Ukraine. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 34, No. 3, 184–190, May–June, 1998.     

Protonation of Chloro-, Bromo- and Iodo-pentacyanocobaltate(III) Complexes

The reactions between Fe(Phen)₃²⁺[phen = tris-(1,10) phenanthroline] and Co(CN)₅X³⁻ (X = Cl, Br or I) have been studied in aqueous acidic solutions at 25 °C and ionic strength in the range I = 0.001–0.02 mol dm⁻³ (NaCl/HCl). Plots of k₂ versus √I, applying Debye–Huckel Theory, gave the values −1.79 ± 0.18, −1.65 ± 0.18 and 1.81 ± 0.10 as the product of charges (Z_AZ_B) for the reactions of Fe(Phen)₃²⁺ with the chloro-, bromo- and iodo- complexes respectively. Z_AZ_B of ≈ −2 suggests that the charge on these Co^III complexes cannot be −3 but is −1. This suggests the possibility of protonation of these Co^III complexes. Protonation was investigated over the range [H⁺] = 0.0001 −0.06 mol dm⁻³ and the protonation constants K_a obtained are 1.22 × 10³, 7.31 × 10³ and 9.90 × 10² dm⁶ mol⁻³ for X = Cl, Br and I, respectively.     

Preparation of CoxFe3?xO4 nanoparticles by thermal decomposition of some organo-metallic precursors

This paper presents a study for the preparation of Co_xFe_3−xO₄ (x = 0.02, 0.2, 0.5, 0.8, 1.0, 1.1, 1.5) nanoparticles, starting from metal nitrates: Co(NO₃)₂·6H₂O, Fe(NO₃)₃·9H₂O and ethylene glycol (C₂H₆O₂). By heating the solutions metal nitrates-ethylene glycol, the redox reaction took place between the anion NO₃ ⁻ and OH–(CH₂)₂–OH with formation of carboxylate anions. The resulted carboxylate anions reacted with Co(II) and Fe(III) cations to form coordinative compounds which are precursors for cobalt ferrite. XRD and magnetic measurements have evidenced the formation of cobalt ferrite for all studied molar ratios. The average diameter of the cobalt ferrite crystallites was estimated from XRD data and showed values in the range 10–20 nm. The crystallites size depends on the annealing temperature. The magnetization of the synthesized samples depends on the molar ratio Co/Fe and on the annealing temperature.