Simulation and interpretation of diffuse mode bifurcation of elastoplastic solids

The diffuse mode bifurcation of elastoplastic solids at finite strain is investigated. The multiplicative decomposition of deformation gradient and the hyperelasto-plastic constitutive relationship are adapted to the numerical bifurcation analysis of the elastoplastic solids. First, bifurcation analyses of rectangular plane strain specimens subjected to uniaxial compression are conducted. The onset of the diffuse mode bifurcations from a homogeneous state is detected; moreover, the post-bifurcation states for these modes are traced to arrive at localization to narrow band zones, which look like shear bands. The occurrence of diffuse mode bifurcation, followed by localization, is advanced as a possible mechanism to create complex deformation and localization patterns, such as shear bands. These computational diffuse modes and localization zones are shown to be in good agreement with the associated experimental ones observed for sand specimens to ensure the validity of this mechanism. Next, the degradation of horizontal sway stiffness of a rectangular specimen due to plane strain uniaxial compression is pointed out as a cause of the bifurcation of the first antisymmetric diffuse mode, which triggers the tilting of the specimen. Last, circular and punching failures of a footing on a foundation are simulated.     

挤压油膜阻尼器－滑动轴承－刚性转子系统的稳定性及分岔行为

对挤压油膜阻尼器－滑动轴承－转子系统的稳定性及分岔行为进行了研究，由于该动力系统为一强非线性系统，具有复杂的非线性现象。本文采用Ｆｌｏｑｕｅｔ理论对其周期解的稳定性进行了计算分析：随着系统参数的变化，该系统将出现稳态周期解、准周期分岔、倍周期分岔。文中也对系统平衡点的稳定性进行了分析，讨论了其Ｈｏｐｆ分岔行为     

两系非线性悬挂车辆的运行稳定性与分叉

本文选取两系具有滞后非线性悬挂的车辆为目标，建立其数学模型和运动微分方程，用常微分方程稳定性理论对车辆蛇行运动进行理论分析，并应用分叉理论研究了整车在蛇行失稳后的动力学行为，得出蛇行运动的分叉解及稳定判据，得到防止车辆蛇行运动的充分条件，并研究了系统参数对临界速度的影响、分叉解振幅及稳定性的影响，为车辆设计和参数选取提供依据。     

Microscopic symmetric bifurcation condition of cellular solids based on a homogenization theory of finite deformation

In this paper, we establish a homogenization framework to analyze the microscopic symmetric bifurcation buckling of cellular solids subjected to macroscopically uniform compression. To this end, describing the principle of virtual work for infinite periodic materials in the updated Lagrangian form, we build a homogenization theory of finite deformation, which satisfies the principle of material objectivity. Then, we state a postulate that at the onset of microscopic symmetric bifurcation, microscopic velocity becomes spontaneous, yet changing the sign of such spontaneous velocity has no influence on the variation in macroscopic states. By applying this postulate to the homogenization theory, we derive the conditions to be satisfied at the onset of microscopic symmetric bifurcation. The resulting conditions are verified by analyzing numerically the in-plane biaxial buckling of an elastic hexagonal honeycomb. It is thus shown that three kinds of experimentally observed buckling modes of honeycombs i.e., uniaxial, biaxial and flower-like modes, are attained and classified as microscopic symmetric bifurcation. It is also shown that the multiplicity of bifurcation gives rise to the complex cell-patterns in the biaxial and flower-like modes.     

ANALYSIS OF STABILITY ON ELASTIC PLATES WITH INITIAL IMPERFECTIONS

ＡＮＡＬＹＳＩＳＯＦＳＴＡＢＩＬＩＴＹＯＮＥＬＡＳＴＩＣＰＬＡＴＥＳＷＩＴＨＩＮＩＴＩＡＬＩＭＰＥＲＦＥＣＴＩＯＮＳＸｕＫａｉｙｕ（徐凯宇）（ＲｅｃｅｉｔｅｄＯｃｔ．５，１９９４．ＣｏｍｍｕｎｉｃａｔｅｄＰａｉＬｉｚｈｏｕ）ＡＮＡＬＹＳＩＳＯＦＳＴＡ...     

轴承-转子系统Hopf分叉及其后动力学行为研究

采用长轴承解析模型研究滑动轴承支承的平衡单盘柔性转子-轴承系统的自激振动,把结合打靶法的延续算法应用于柔性平衡转子-轴承系统Hopf分叉后周期解的追踪和求解上,基于Floquet理论对周期解的稳定性加以分析.通过持续追踪周期解频率变化并与失稳固有频率进行对比,分析了自激锁相现象,研究了非线性油膜力自激源对系统的作用机理.运用Poincare映射、分叉图、及Lyapnov指数对周期解分叉、混沌及进入和脱离混沌的过程进行了分析.     

Elastoplastic microscopic bifurcation and post-bifurcation behavior of periodic cellular solids

In this study, a general framework is developed to analyze microscopic bifurcation and post-bifurcation behavior of elastoplastic, periodic cellular solids. The framework is built on the basis of a two-scale theory, called a homogenization theory, of the updated Lagrangian type. We thus derive the eigenmode problem of microscopic bifurcation and the orthogonality to be satisfied by the eigenmodes. The orthogonality allows the macroscopic increments to be independent of the eigenmodes, resulting in a simple procedure of the elastoplastic post-bifurcation analysis based on the notion of comparison solids. By use of this framework, then, bifurcation and post-bifurcation analysis are performed for cell aggregates of an elastoplastic honeycomb subject to in-plane compression. Thus, demonstrating a basic, long-wave eigenmode of microscopic bifurcation under uniaxial compression, it is shown that the eigenmode has the longitudinal component dominant to the transverse component and consequently causes microscopic buckling to localize in a cell row perpendicular to the loading axis. It is further shown that under equi-biaxial compression, the flower-like buckling mode having occurred in a macroscopically stable state changes into an asymmetric, long-wave mode due to the sextuple bifurcation in a macroscopically unstable state, leading to the localization of microscopic buckling in deltaic areas.     

层合板分叉方程的Lyapunov—Schmidt约化分析

采用广义傅立叶级数法建立了具有弹性约束的复合材料矩形层板在面内载荷作用下的非线性稳定性控制方程,并简化为矩阵形式。利用分叉理论和泛函知识,对有限维的该分叉方程进行了Lyapunov-Schmidt约化,获得了三种典型的分叉图形式,同时指出当非齐次项等于零时必然发生分叉。数值计算结果表明了三种分叉图分别所对应的典型的力学模型,主要因素在于边界条件、铺层方式及初始缺陷三方面。     

Prediction of ductile fracture in tension by bifurcation,localization, and imperfection analyses

In this investigation, it is shown that the onset of ductile fracture in tension can be interpreted as the result of a supercritical bifurcation of homogeneous deformation and that this fact can be applied to predict ductile fracture initiation of materials with general imperfections or flaws. We focus on one dimensional quasi-static simple tension for rate-independent isotropic plastic materials. For deformation beyond the bifurcation point, multiple equilibrium paths appear. The homogeneous deformation, as one of the equilibrium paths, loses stability while the inhomogeneous paths are stable, thus indicating the occurrence of strain localization. This investigation also provides a physical example for the application of the Lambert W function in material localization analyses. Material instability is treated as the instability of a static system with dynamic perturbation. We also address the presence of microvoids in a power law plastic material as an unfolding of the supercritical pitchfork bifurcation. The imperfect system, idealized as spherical voids within the plastic matrix, is analyzed using the familiar Gurson model which is based on the presumption of a randomly voided material and characterized by the volume fraction of voids. If, in addition, the sizes of the microvoids are known, this then provides a length scale for the imperfection zone. In this manner, relevance to the sample size effects of strain-to-failure for ductile fracture initiation is addressed by considering separate zones with variations in void volume fractions. Fracture initiation predictions are presented and compare very well to existing experimental results.     

热点起爆理论的近似分枝点分析

本文用变分法对热点起爆理论进行了分枝点分析,并不是建立在热平衡条件的基础上,所以比较普遍。     

弹性支承滑动轴承不平衡转子系统非线性动力稳定性和分岔的研究

研究弹性支承滑动轴承不平衡转子系统的稳定性及分岔特性。建立了弹性支承-滑动轴承-转子非线性动力系统的力学模型，在油膜力非线性的情况下，应用数值模拟，采用打靶法计算了刚性转子系统的周期解，并与龙格-库塔法计算的结果进行了对比，依据Floquet理论，分析了周期解的稳定性，再结合龙格-库塔法、Poineare映射法作出了系统运动分岔图。最后，讨论了轴的柔性对转子系统运动稳定性的影响。     

裂纹转子在支承松动时的振动特性研究

以具有支承松动的Jeffcott裂纹转子为研究对象，分析了支承松动和轴上横向裂纹对转子系统刚度的影响，建立了转子系统振动的微分方程，并用数值方法分析了其振动特性。分析表明，转子在裂纹和支承松动这两种非线性因素的作用下，表现出复杂的非线性行为。     

Instabilities in bimetallic layers

The analysis of the thickness fluctuations in the extrusion process of bimetallic tubes has motivated the present work. For an orthotropic, incrementally-linear solid, the possibility of non-uniform solutions near the bimaterial interface is investigated by assuming an initial perturbation along the interface. The bifurcation equation for the problem is established and firstly solved numerically to obtain a critical strain in terms of a corresponding wavenumber. Then the bifurcation equation is solved for strains above the critical strain in order to analyse the growth of the perturbation, by means of an instability parameter introduced in the analysis. A set of values for several selected parameters of the process and three constitutive equations are considered in the computations. Their influence in the stability of the process is discussed in detail.     

随机激励对软弹簧杜芬振子动力学的分散作用

讨论了有界噪声激励对软弹簧杜芬振子的倍周期分岔至混沌运动的影响。利用蒙特卡罗方法,通过对系统受侵蚀安全盆的变化状况进行了观察,并由此对后继动力学分析的初始点进行了选取。系统的相图、倍周期分岔图以及庞加莱映射图等方面的数值结果表明,外加随机激励的作用往往掩盖原确定性系统内在的规则运动,对原确定性系统的运动具有较典型的分散作用,可延缓系统的倍周期分岔,也可使得系统内在随机行为提前发生,即可使得系统更容易出现混沌运动。     

剪切带状分叉的力学条件

在已论证过的应变软化效应对形成剪切带状分叉的作用的基础上,本文研究了:(1)什么受力情况最易激发剪切带(2)采用什么力学模型和参数可以模拟材料中的曲线型带状分叉。     

非线性碰摩力对碰摩转子分叉与混沌行为的影响

研究了具有非线性碰摩力的转子局部碰摩的分叉与混沌运动,利用计算机仿真对某发动机转子的碰摩故障进行了数值模拟,讨论了转子系统参数的变化对转子混池运动状态的影响,并与碰摩实验结果进行了比较,发现了具有非线性碰摩力的转子局部碰摩转子系统的各种多周期运动和混沌运动及其演变过程。     

韧性材料的剪切带状分叉

本文从两个位移变量入手分析了平面应变条件下的剪切带状分叉从而放弃了分叉时体积不变的约束。文中论证了分叉时材料将伴随有局部性的体积变化,应变软化,即材料性质的分叉突变。文中还用摄动法近似分析了材料缺陷可能造成的影响。     

一类非光滑映射的边界碰撞分岔

对于一类分段映射讨论了非线性幂次z导致的不同非光滑性, 推导了周期n 解的边界碰撞分岔及光滑flip和fold 分岔条件. 通过数值仿真验证了这些分岔条件的正确性, 发现存在稳定周期窗的加周期分岔序列是非光滑映射的一个普遍现象, 根本原因在于边界碰撞分岔和光滑flip 或fold 分岔相互作用. 当z取值不同分岔序列有很大的不同, 而参数γ 对于分岔序列的结构影响不大, 因此令参数γ=0 可简化映射的参数分析.     

对称铺设正交各向异性层合板的亚谐参数共振

本文应用奇异性理论讨论了对称铺设正交各向异性层合矩形板的亚谐参数共振问题。主要内容是用Ｌｉａｐｕｎｏｖ－Ｓｃｈｍｉｄｔ方法结合Ｚ２－对称等变的概念，使分叉方程转化为代数方程的研究，同时给出了参数平面上不同参数域中各种可能的分叉曲线。