Effect of substituents on the strength of A-Cl- (A = Si, Ge, and Sn) bonds in hypervalent systems: ACl5-, ACl4F-, and A(CH3)3Cl2-

The gas-phase strengths of the A-Cl(-) bonds in ACl(5)(-), ACl(4)F(-), and A(CH(3))(3)Cl(2)(-) (A = Si, Ge, and Sn) have been determined by measuring thresholds for collision-induced dissociation in a flowing afterglow-tandem mass spectrometer. Bond dissociation energies increase in the order Si < Ge < Sn. Replacement of the three equatorial chlorides with methyl groups weakens the bonds, while replacing one axial chloride with a fluoride strengthens the bonds. Computational results using the B3LYP model with several basis sets parallel the experimental periodic trends, but provide bond dissociation energies lower than experiment by 7-44 kJ mol(-1). MP2 computational results are in better agreement with experiment. The results are consistent with steric hindrance and electrostatic effects playing significant roles in the bonding energetics.     

Cycloalkane and cycloalkene C-H bond dissociation energies

Both C-H bond dissociation energies for cyclobutene were measured in the gas phase (BDE = 91.2 +/- 2.3 (allyl) and 112.5 +/- 2.5 (vinyl) kcal mol-1) via a thermodynamic cycle by carrying out proton affinity and electron-binding energy measurements on 1- and 3-cyclobutenyl anions. The results were compared to those for an acyclic model compound, cis-2-butene, and provide the needed information to experimentally establish the heat of formation of cyclobutadiene. Chemically accurate G3 and W1 calculations also were carried out on cycloalkanes, cycloalkenes, and selected reference compounds. It appears that commonly cited bond energies for cyclopropane, cyclobutane, and cyclohexane are 3 to 4 kcal mol-1 too small and their pi bond strengths, as given by BDE1 - BDE2, are in error by up to 8 kcal mol-1.     

Hydrogen atom transfer reactions of C2-, C4-, and C6-: bond dissociation energies of linear H-C2n- and H-C2n (n = 1, 2, 3)

The reactions of C2-, C4-, and C6- with D2O and ND3 and of C4- with CH3OH, CH4, and C2H6 have been investigated using guided ion beam tandem mass spectrometry. Hydrogen (or deuterium) atom transfer is the major product channel for each of the reactions. The reaction threshold energies for collisional activation are reported. Several of the reactions exhibit threshold energies in excess of the reaction endothermicity. Potential energy calculations using density functional theory show energy barriers for some of the reactions. Dynamic restrictions related to multiple wells along the reaction path may also contribute to elevated threshold energies. The results indicate that the reactions with D2O have the smallest excess threshold energies, which may therefore be used to derive lower limits on the C-H bond dissociation energies of the C2nH- and C2nH (n = 1-3) linear species. The experimental lower limits for the bond dissociation energies of the neutral radicals to linear products are D0(C2-H) >or= 460 +/- 15 kJ/mol, D0(C4-H) >or= 427 +/- 12 kJ/mol, and D0(C6-H) >or= 405 +/- 11 kJ/mol.     

Determination of N-NO bond dissociation energies of N-methyl-N-nitrosobenzenesulfonamides in acetonitrile and application in the mechanism analyses on NO transfer

The heterolytic and homolytic N-NO bond dissociation energies of seven substituted N-methyl-N-nitrosobenzenesulfonamides (abbreviated as G-MNBS, G = p-OCH(3), p-CH(3), p-H, p-Cl, p-Br, 2,5-2Cl, m-NO(2)) in acetonitrile solution were evaluated for the first time by using titration calorimetry and relative thermodynamic cycles according to Hess' law. The results show that the energetic scales of the heterolytic and homolytic N-NO bond dissociation energies of G-MNBS in acetonitrile solution cover the ranges from 44.3 to 49.5 and from 33.0 to 34.9 kcal/mol for the neutral G-MNBS, respectively, which indicates that N-methyl-N-nitrosobenzenesulfonamides are much easier to release a NO radical (NO(*)) than to release a NO cation (NO(+)). The estimation of the heterolytic and homolytic (N-NO)(-)(*) bond dissociation energies of the seven G-MNBS radical anions in acetonitrile solution gives the energetic ranges of -15.8 to -12.9 and -3.1 to 1.8 kcal/mol for the (N-NO)(-)(*) bond homolysis and heterolysis, respectively, which means that G-MNBS radical anions are very unstable at room temperature and able to spontaneously or easily release a NO radical or NO anion (NO(-)), but releasing a NO radical is easier than releasing NO anion. These determined N-NO bond dissociation energies of G-MNBS and their radical anions have been successfully used in the mechanism analyses of NO transfer from G-MNBS to 3,6-dibromocarbazole and the reactions of NO with the substituted N-methyl-benzenesulfonamide nitranions (G-MBSN(-)) in acetonitrile solution.     

Weak metal-metal bonding in small manganese cluster ions, Mn(N)+ (N < or = 7)

The binding energies of manganese cluster ions Mn(N)+ (N = 5-7) were determined by the photodissociation experiments in the near-infrared and visible-photon-energy ranges. The bond dissociation energies of Mn(N)+, D0(Mn(N-1)+...Mn), were obtained to be 1.70+/-0.08, 1.04+/-0.10, and 1.46+/-0.11 eV, respectively, for N = 5, 6, and 7 from the threshold energies for the two-atom loss processes and the bond dissociation energies of Mn3(+) and Mn4(+) reported previously [A. Terasaki et al., J. Chem. Phys. 117, 7520 (2002)]. Correspondingly, binding energies per atom are obtained to be 0.99+/-0.03, 1.00+/-0.03, and 1.06+/-0.03 eV/at. for N = 5, 6, and 7, respectively. A gradual increase in the binding energy from N = 2 to N = 7 shows an increasing contribution of nonbonding 3d orbitals to the bonding via weak hybridization with valence 4s orbitals as the cluster size increases. These binding energies per atom are still much smaller than the bulk cohesive energy of manganese (2.92 eV/at.), and this finding indicates exceptionally weak metal-metal bonds in this size range.     

Direct determination of the ionization energies of PtC, PtO, and PtO2 with VUV radiation

Photoionization efficiency curves were measured for gas-phase PtC, PtO, and PtO2 using tunable vacuum ultraviolet (VUV) radiation at the Advanced Light Source. The molecules were prepared by laser ablation of a platinum tube, followed by reaction with CH4 or N2O and supersonic expansion. These measurements provide the first directly measured ionization energy for PtC, IE(PtC) = 9.45 +/- 0.05 eV. The direct measurement also gives greatly improved ionization energies for the platinum oxides, IE(PtO) = 10.0 +/- 0.1 eV and IE(PtO2) = 11.35 +/- 0.05 eV. The ionization energy connects the dissociation energies of the neutral and cation, leading to greatly improved 0 K bond dissociation energies for the neutrals: D0(Pt-C) = 5.95 +/- 0.07 eV, D0(Pt-O) = 4.30 +/- 0.12 eV, and D0(OPt-O) = 4.41 +/- 0.13 eV, as well as enthalpies of formation for the gas-phase molecules DeltaH(0)(f,0)(PtC(g)) = 701 +/- 7 kJ/mol, DeltaH(0)(f,0)(PtO(g)) = 396 +/- 12 kJ/mol, and DeltaH(0)(f,0)(PtO2(g)) = 218 +/- 11 kJ/mol. Much of the error in previous Knudsen cell measurements of platinum oxide bond dissociation energies is due to the use of thermodynamic second law extrapolations. Third law values calculated using statistical mechanical thermodynamic functions are in much better agreement with values obtained from ionization energies and ion energetics. These experiments demonstrate that laser ablation production with direct VUV ionization measurements is a versatile tool to measure ionization energies and bond dissociation energies for catalytically interesting species such as metal oxides and carbides.     

Structure and reactivity of V(2)O(5): bulk solid, nanosized clusters, species supported on silica and alumina, cluster cations and anions

Vanadyl bond dissociation energies are calculated by density functional theory (DFT). While the hybrid (B3LYP) functional results are close to the available reference data, gradient corrected functionals (BP86, PBE) yield large errors (about 50 to 100 kJ mol(-1)), but reproduce trends correctly. PBE calculations on a V(20)O(62)H(24) cluster model for the (001) surface of V(2)O(5) crystals virtually reproduce periodic slab calculations. The low bond dissociation energy (formation of oxygen surface defect) of 113 kJ mol(-1)(B3LYP) is due to substantial structure relaxations leading to formation of V-O-V bonds between the V(2)O(5) layers of the crystal. This relaxation cannot occur in polyhedral (V(2)O(5))(n) clusters and also not for V(2)O(5) species supported on silica or alumina (represented by cage-type models) for which bond dissociation energies of 250-300 kJ mol(-1) are calculated. The OV(OCH(3))(3) molecule and its dimer are also considered. Radical cations V(2)O(5)(+) and V(4)O(10)(+) have very low bond dissociation energies (22 and 14 kJ mol(-1), respectively), while the corresponding radical anions have higher dissociation energies (about 330 kJ mol(-1)) than the neutral clusters. The bond dissociation energies of the closed shell V(3)O(7)(+) cation (165 kJ mol(-1)) and the closed shell V(3)O(8)(-) anion (283 kJ mol(-1)) are closest to the values of the neutral clusters. This makes them suitable for gas phase studies which aim at comparisons with V(2)O(5) species on supporting oxides.     

Phosphodiester and N-glycosidic bond cleavage in DNA induced by 4-15 eV electrons

Thin molecular films of the short single strand of DNA, GCAT, were bombarded under vacuum by electrons with energies between 4 and 15 eV. Ex vacuo analysis by high-pressure liquid chromatography of the samples exposed to the electron beam revealed the formation of a multitude of products. Among these, 12 fragments of GCAT were identified by comparison with reference compounds and their yields were measured as a function of electron energy. For all energies, scission of the backbone gave nonmodified fragments containing a terminal phosphate, with negligible amounts of fragments without the phosphate group. This indicates that phosphodiester bond cleavage by 4-15 eV electrons involves cleavage of the C-O bond rather than the P-O bond. The yield functions exhibit maxima at 6 and 10-12 eV, which are interpreted as due to the formation of transient anions leading to fragmentation. Below 15 eV, these resonances dominate bond dissociation processes. All four nonmodified bases are released from the tetramer, by cleavage of the N-glycosidic bond, which occurs principally via the formation of core-excited resonances located around 6 and 10 eV. The formation of the other nonmodified products leading to cleavage of the phosphodiester bond is suggested to occur principally via two different mechanisms: (1) the formation of a core-excited resonance on the phosphate unit followed by dissociation of the transient anion and (2) dissociation of the CO bond of the phosphate group formed by resonance electron transfer from the bases. In each case, phosphodiester bond cleavage leads chiefly to the formation of stable phosphate anions and sugar radicals with minimal amounts of alkoxyl anions and phosphoryl radicals.     

Effects of electron attachment on C5'-O5' and C1'-N1 bond cleavages of pyrimidine nucleotides: A theoretical study

Sugar-base C(1')-N(1) and phosphate-sugar C(5')-O(5') bond breakings of 2'-deoxycytidine-5'-monophosphates (dCMP) and 2'-deoxythymidine-5'- monophosphates (dTMP) and their radical anions have been explored theoretically at the B3LYP/DZP++ level of theory. Calculations show that the low-energy electrons attachment to the pyrimidine nucleotides results in remarkable structural and chemical bonding changes. Predicted Gibbs free energies of reaction DeltaG for the C(5')-O(5') bond dissociation process of the radical anions are -14.6 and -11.5 kcal mol(-1), respectively, and such dissociation processes may be intrinsically spontaneous in the gas phase. Furthermore, the C(5')-O(5') bond cleavage processes of the anionic dCMP and dTMP were predicted to have activation energies of 6.9 and 8.0 kcal mol(-1) in the gas phase, respectively, much lower than the barriers for the C(1')-N(1) bond breaking process, showing that the C-O bond dissociation in DNA single strand breaks is a dominant process as observed experimentally.     

N-亚硝基吲哚系列化合物及其自由基负离子在乙腈介质中N-NO键断裂能的测定

利用滴定量热技术并结合适当的热力学循环测定了乙腈溶液中7个取代的N-亚硝基吲哚化合物中N—NO键的异裂能和均裂能, 能量范围分别为206.1~246.2 kJ/mol和119.1~124.6 kJ/mol. 表明N-亚硝基吲哚均裂释放NO自由基(NO·)比异裂释放NO正离子(NO+)要容易得多, 通过热力学循环得到的相应自由基负离子中N—NO键的异裂能和均裂能的能量范围分别为25.5~34.4和5.0~40.5 kJ/mol, 表明所研究化合物的自由基负离子在室温下很不稳定.     

MX3(-) superhalogens (M = Be, Mg, Ca; X = Cl, Br): a photoelectron spectroscopic and ab initio theoretical study

Gas-phase alkaline earth halide anions, MgX3(-) and CaX3(-) (X = Cl, Br), were produced using electrospray and investigated using photoelectron spectroscopy at 157 nm. Extremely high electron binding energies were observed for all species and their first vertical detachment energies were measured as 6.60 +/- 0.04 eV for MgCl3(-), 6.00 +/- 0.04 eV for MgBr3(-), 6.62 +/- 0.04 eV for CaCl3(-), and 6.10 +/- 0.04 eV for CaBr3(-). The high electron binding energies indicate these are very stable anions and they belong to a class of anions, called superhalogens. Theoretical calculations at several levels of theory were carried out on these species, as well as the analogous BeX3(-). Vertical detachment energy spectra were predicted to compare with the experimental observations, and good agreement was obtained for all species. The first adiabatic detachment energies were found to be substantially lower (by about 1 eV) than the corresponding vertical detachment energies for all the MX3(-) species, indicating extremely large geometry changes between MX3(-) and MX3. We found that all the MX3(-) anions possess D3h ((1)A1') structures and are extremely stable against dissociation into MX2 and X-. The corresponding neutral species MX3, however, were found to be only weakly bound with respect to dissociation toward MX2 + X. The global minimum structures of all the MX3 neutrals were found to be C2v ((2)B2), which can be described as (X2(-))(MX+) charge-transfer complexes, whereas the MX2...X (C2v, (2)B1) van der Waals complexes were shown to be low-lying isomers.     

Potential energy surface for activation of methane by Pt(+): a combined guided ion beam and DFT study

A guided-ion beam tandem mass spectrometer is used to study the reactions of Pt(+) with methane, PtCH(2)(+) with H(2) and D(2), and collision-induced dissociation of PtCH(4)(+) and PtCH(2)(+) with Xe. These studies experimentally probe the potential energy surface for the activation of methane by Pt(+). For the reaction of Pt(+) with methane, dehydrogenation to form PtCH(2)(+) + H(2) is exothermic, efficient, and the only process observed at low energies. PtH(+), formed in a simple C-H bond cleavage, dominates the product spectrum at high energies. The observation of a PtH(2)(+) product provides evidence that methane activation proceeds via a (H)(2)PtCH(2)(+) intermediate. Modeling of the endothermic reaction cross sections yields the 0 K bond dissociation energies in eV (kJ/mol) of D(0)(Pt(+)-H) = 2.81 +/- 0.05 (271 +/- 5), D(0)(Pt(+)-2H) = 6.00 +/- 0.12 (579 +/- 12), D(0)(Pt(+)-C) = 5.43 +/- 0.05 (524 +/- 5), D(0)(Pt(+)-CH) = 5.56 +/- 0.10 (536 +/- 10), and D(0)(Pt(+)-CH(3)) = 2.67 +/- 0.08 (258 +/- 8). D(0)(Pt(+)-CH(2)) = 4.80 +/- 0.03 eV (463 +/- 3 kJ/mol) is determined by measuring the forward and reverse reaction rates for Pt(+) + CH(4) right harpoon over left harpoon PtCH(2)(+) + H(2) at thermal energy. We find extensive hydrogen scrambling in the reaction of PtCH(2)(+) with D(2). Collision-induced dissociation (CID) of PtCH(4)(+), identified as the H-Pt(+)-CH(3) intermediate, with Xe reveals a bond energy of 1.77 +/- 0.08 eV (171 +/- 8 kJ/mol) relative to Pt(+) + CH(4). The experimental thermochemistry is favorably compared with density functional theory calculations (B3LYP using several basis sets), which also establish the electronic structures of these species and provide insight into the reaction mechanism. Results for the reaction of Pt(+) with methane are compared with those for the analogous palladium system and the differences in reactivity and mechanism are discussed.     

The dissociation kinetics of energy-selected CpMn(CO)(3)(+) ions studied by threshold photoelectron-photoion coincidence spectroscopy

Threshold photoelectron-photoion coincidence spectroscopy has been used to investigate the dissociation kinetics of the cyclopentadienyl manganese tricarbonyl ion, CpMn(CO)(3)(+). The ionization energy of CpMn(CO)(3) was measured from the threshold photoelectron spectrum to be 7.69 +/- 0.02 eV. The dissociation of the CpMn(CO)(3)(+) ion proceeds by the sequential loss of three CO molecules. The first and third CO loss reactions were observed to be slow (lifetimes in the microsecond range). By simulating the resulting asymmetric time-of-flight peak shapes and breakdown diagram, 0 K onsets for three product ions were determined to be 8.80 +/- 0.04, 9.43 +/- 0.04, and 10.51 +/- 0.06 eV, respectively. Combined with the adiabatic ionization energy, the three successive Mn-CO bond energies in the CpMn(CO)(3)(+) were found to be alternating with values of 1.11 +/- 0.04, 0.63 +/- 0.04, and 1.08 +/- 0.06 eV, respectively. Using a scaled theoretical Cp-Mn(+) bond energy of 3.10 +/- 0.10 eV and the combined results from theory and experiment, the 298 K gas-phase heat of formation of CpMn(CO)(3) is suggested to be -419 +/- 15 kJ/mol. Based on this value, the 298 K heats of formation of CpMn(CO)(3)(+), CpMn(CO)(2)(+), CpMnCO(+), and CpMn(+) are 325 +/- 15, 546 +/- 15, 719 +/- 15, and 938 +/- 15 kJ/mol, respectively. By scaling theoretical calculated neutral bond energies with the experimental information derived in this study, the successive Mn-CO bond energies were estimated to be 1.88, 1.10, and 1.03 eV, respectively, while the Cp-Mn bond energy was found to be 2.16 eV. Comparison between the quantum chemical calculations and experimental values shows that the loss of CO groups follows the lowest energy adiabatic path, in which electronic spin on the metal center is not conserved.     

Thermochemical studies of N-methylpyrazole and N-methylimidazole

The 351.1 nm photoelectron spectra of the N-methyl-5-pyrazolide anion and the N-methyl-5-imidazolide anion are reported. The photoelectron spectra of both isomers display extended vibrational progressions in the X2A' ground states of the corresponding radicals that are well reproduced by Franck-Condon simulations, based on the results of B3LYP/6-311++G(d,p) calculations. The electron affinities of the N-methyl-5-pyrazolyl radical and the N-methyl-5-imidazolyl radical are 2.054 +/- 0.006 eV and 1.987 +/- 0.008 eV, respectively. Broad vibronic features of the A(2)A' ' states are also observed in the spectra. The gas-phase acidities of N-methylpyrazole and N-methylimidazole are determined from measurements of proton-transfer rate constants using a flowing afterglow-selected ion flow tube instrument. The acidity of N-methylpyrazole is measured to be Delta(acid)G(298) = 376.9 +/- 0.7 kcal mol(-1) and Delta(acid)H(298) = 384.0 +/- 0.7 kcal mol(-1), whereas the acidity of N-methylimidazole is determined to be Delta(acid)G(298) = 380.2 +/- 1.0 kcal mol(-1) and Delta(acid)H(298)= 388.1 +/- 1.0 kcal mol(-1). The gas-phase acidities are combined with the electron affinities in a negative ion thermochemical cycle to determine the C5-H bond dissociation energies, D(0)(C5-H, N-methylpyrazole) = 116.4 +/- 0.7 kcal mol(-1) and D(0)(C5-H, N-methylimidazole) = 119.0 +/- 1.0 kcal mol(-1). The bond strengths reported here are consistent with previously reported bond strengths of pyrazole and imidazole; however, the error bars are significantly reduced.     

Metal-benzene and metal-CO bond energies in neutral and ionic C6H6Cr(CO)3 studied by threshold photoelectron-photoion coincidence spectroscopy and density functional theory

photoelectron-photoion coincidence spectroscopy and density functional theory calculations have been used to investigate the dissociation kinetics of the benzene chromium tricarbonyl ion, BzCr(CO)3+ (Bz = C6H6). The dissociation of the BzCr(CO)3+ ion proceeds by the sequential loss of three CO and benzene ligands. The first and third CO and the benzene loss reactions were associated with metastable precursor ions (lifetimes in the microsecond range). By simulating the resulting asymmetric time-of-flight peak shapes and breakdown diagram, the 0 K appearance energies of the four product ions were determined to be 8.33 +/- 0.05, 8.93 +/- 0.05, 9.97 +/- 0.06, and 11.71 +/- 0.06 eV, respectively. Combined with the ionization energy of BzCr(CO)3, 7.30 +/- 0.05 eV, the three successive Cr-CO bond energies in the BzCr(CO)3+ were found to alternate, with values of 1.03 +/- 0.05, 0.60 +/- 0.05, and 1.04 +/- 0.05 eV, respectively, and the Bz-Cr bond energy in BzCr+ is 1.74 +/- 0.05 eV, a trend confirmed by the density functional theory (DFT) calculations. Using the heats of formation of the fully dissociated products, C6H6, Cr+, and CO, the 298 K heats of formation the ionic BzCr(CO)n+ (n = 03) species were determined. By scaling the DFT calculated bond energies for the neutral molecules, the heats of formation of the neutral BzCr(CO)n (n = 03) were also obtained.     

G3 and density functional theory investigations of the structures and energies of SF(n)Cl (n=0-5) and their anions

Computations of structures and total energies have been carried out for neutral and anionic SF(n)Cl (n=0-5), using the composite G3 method and density functional theory (DFT) at the B3LYP6-311+G(3df) level. The total energies and zero-point energies have been used here to derive electron affinities, bond dissociation energies, and heats of formation. In addition, vibrational frequencies, polarizabilities, and dipole moments are reported. Results are compared with earlier work for SF(m) (m=1-6) and demonstrate how the relatively weak S-Cl bond and reduced symmetry influence the properties of these molecules and anions. Comparisons are also made between G3 and DFT results for SF(n)Cl. Of particular interest is the alternating pattern of agreement between calculated electron affinity values with n. These calculations also provide critical energetic data needed to understand experimental measurements of electron attachment to SF(5)Cl [Van Doren et al., J. Chem. Phys. 128, 094309 (2008)] for which numerous ion products have been reported in the literature at low electron energy.     

羰基镍簇Ni(CO)n(n=1-4)的结构和Ni-CO键解离性质的密度泛函理论研究

在密度泛函理论框架下, 应用不同泛函计算了配合物Ni(CO)n(n=1~4)的平衡几何构型和振动频率. 考察了泛函和基组重叠误差对预测Ni—CO键解离能的影响. 计算结果表明, 用杂化泛函能得到与实验一致的优化几何构型和较合理的振动频率. 对Ni(CO)n(n=2~4)体系, 用“纯”泛函, 如BP86和BPW91, 可得到与CCSD(T)更符合、 并与实验值接近的解离能. 当解离产物出现单个金属原子或离子(如金属羰基配合物的完全解离)时, BSSE校正项的计算中应保持金属部分的电子结构一致. 只有考虑配体基组和不考虑配体基组两种情况下金属的电子构型与配合物中金属的构型一致时, 才能得到合理的BSSE校正, 从而预测合理的解离能.     

Electronic structure of the hydroxo and methoxo oxometalate anions MO3(OH)- and MO3(OCH3)- (M = Cr, Mo, and W)

The electronic structure of the mononuclear hydroxo MO3(OH)- and methoxo MO3(OCH3)- Group 6 oxometalate anions (M = Cr, Mo, and W) were examined by photodetachment photoelectron spectroscopy and electronic structure calculations at the density functional and CCSD(T) levels of theory. All of the anions exhibited high electron binding energies (>4.9 eV), with the lowest-energy detachment features arising from oxygen 2p-based orbitals. The combined experimental and theoretical results allowed the change in molecular orbital energy levels to be investigated as a function of metal (Cr, Mo, or W) and ligand (-OH, -OCH3). A number of fundamental thermodynamic properties of the anions and corresponding neutrals were predicted on the basis of the theoretical calculations. The calculations indicate high O-H bond dissociation energies for MO2(OR)(O-H) (R = H, CH3) and MO3(O-H), consistent with their high Br?nsted acidities (just below that of H2SO4 in the gas phase) and the high ionization energies of their conjugate base anions. This suggests that the corresponding radicals should readily abstract H atoms from organic molecules.     

Determination of the electron affinities of alpha- and beta-naphthyl radicals using the kinetic method with full entropy analysis. The C-H bond dissociation energies of naphthalene.

The C - H bond dissociation energies for naphthalene were determined using a negative ion thermochemical cycle involving the gas-phase acidity (Delta H (acid)) and electron affinity (EA) for both the alpha- and beta-positions. The gas-phase acidity of the naphthalene alpha- and beta-positions and the EAs of the alpha- and beta-naphthyl radicals were measured in the gas phase in a flowing after glow-triple quadrupole apparatus. A variation of the Cooks kinetic method was used to measure the EAs of the naphthyl radicals by collision-induced dissociation of the corresponding alpha- and beta-naphthylsulfinate adducts formed by reactions in the flow tube portion of the instrument. Calibration references included both pi and sigma radicals, and full entropy analysis was performed over a series of calibration curves measured at collision energies ranging from 3.5 to 8 eV (center-of-mass). The measured EAs are 33.0 +/- 1.4 and 31.4 +/- 1.0 kcal mol(-1) (1 kcal = 4.184 kJ) for the alpha- and beta-naphthyl radicals, respectively. The gas-phase acidities for naphthalene were measured by the DePuy silane cleavage method, which utilizes the relative abundances of aryldimethylsiloxides and trimethylsiloxide that result from competitive cleavages from a proposed penta coordinate hydroxysiliconate intermediate. The measured acidities are 394.0 +/- 5.0 and 397.6 +/- 4.8 kcal mol(-1) for the alpha- and beta- positions, respectively. The C - H bond dissociation energies calculated from the thermochemical cycle are 113.4 +/- 5.2 and 115.4 +/- 4.9 kcal mol(-1) for the alpha- and beta-positions, respectively. These energies are, to within experimental error, indistinguishable and are approximately the same as the first bond dissociation energy for benzene.     

Theoretical approaches to estimating homolytic bond dissociation energies of organocopper and organosilver compounds

Although organocopper and organosilver compounds are known to decompose by homolytic pathways among others, surprisingly little is known about their bond dissociation energies (BDEs). In order to address this deficiency, the performance of the DFT functionals BLYP, B3LYP, BP86, TPSSTPSS, BHandHLYP, M06L, M06, M06-2X, B97D, and PBEPBE, along with the double hybrids, mPW2-PLYP, B2-PLYP, and the ab initio methods, MP2 and CCSD(T), have been benchmarked against the thermochemistry for the M-C homolytic BDEs (D(0)) of Cu-CH(3) and Ag-CH(3), derived from guided ion beam experiments and CBS limit calculations (D(0)(Cu-CH(3)) = 223 kJ·mol(-1); D(0)(Ag-CH(3)) = 169 kJ·mol(-1)). Of the tested methods, in terms of chemical accuracy, error margin, and computational expense, M06 and BLYP were found to perform best for homolytic dissociation of methylcopper and methylsilver, compared with the CBS limit gold standard. Thus the M06 functional was used to evaluate the M-C homolytic bond dissociation energies of Cu-R and Ag-R, R = Et, Pr, iPr, tBu, allyl, CH(2)Ph, and Ph. It was found that D(0)(Ag-R) was always lower (～50 kJ·mol(-1)) than that of D(0)(Cu-R). The trends in BDE when changing the R ligand reflected the H-R bond energy trends for the alkyl ligands, while for R = allyl, CH(2)Ph, and Ph, some differences in bond energy trends arose. These trends in homolytic bond dissociation energy help rationalize the previously reported (Rijs, N. J.; O'Hair, R. A. J. Organometallics2010, 29, 2282-2291) fragmentation pathways of the organometallate anions, [CH(3)MR](-).