基于合成后修饰策略构建高灵敏度和选择性金属有机骨架基荧光静默系统用于抗坏血酸的检测

成功制备了一种在水溶液中表现出优异荧光性能和稳定结构的三维荧光金属有机骨架[Cd (L)(H₂O)_0.5]·DMF·2.5H₂O (1),其中H₂L=3-(四唑-5-基)三唑。1在识别Cr (Ⅵ)离子过程中表现出明显的荧光猝灭现象,并形成“开-关”荧光静默体系(Cr₂O₇^2-@1),该体系可以快速检测水溶液中的Cr (Ⅵ)离子,这是Cr (Ⅵ)的紫外吸收光谱和1的激发光谱重叠而导致的福斯特共振能量转移(FRET)。此外,通过消除FRET的作用,Cr₂O₇^2-@1的荧光强度可以恢复或超越原始值,从而实现对水体系中抗坏血酸(AA)的高选择性和灵敏度的荧光检测。同时,Cr₂O₇^2-@1体系可以成功检测维生素C片中的AA,回收率为98.20%~103.33%,相对标准偏差(RSD)为1.78%~3.42%。基于此,构建了以AA和铬(Ⅵ)为化学输入的荧光“IMPLICATION”分子逻辑门。     

MOF-1和Tb@MOF-1荧光探针的设计、 合成及对痕量Cr2O72-、 S2O82-离子的识别

采用5-((4-吡啶基)甲氧基)-异烟酸(H₂PLIA)、1,3,5-三(1-咪唑基)-苯(TIB)合成了金属有机骨架[Cd(PLIA)(TIB)]_n (MOF-1),MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1 易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1 和Tb@MOF-1 进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

MOF-1和Tb@MOF-1荧光探针的设计、合成及对痕量Cr2O72-、S2O82-离子的识别

采用5-（（4-吡啶基）甲氧基）-异烟酸（H₂PLIA）、1,3,5-三（1-咪唑基）-苯（TIB）合成了金属有机骨架[Cd （PLIA）（TIB）]_n （MOF-1）。MOF-1是具有理想一维孔道的二维结构化合物,其一维孔道由柔性三角形PLIA^2-配体和刚性三角形TIB配体间隔形成。利用MOF-1易掺杂的优势,采用后修饰合成策略制备了Tb@MOF-1。对MOF-1和Tb@MOF-1进行了基本表征及荧光探针性能研究。2种探针材料具有相同的结构。MOF-1和Tb@MOF-1分别对水溶液中的Cr₂O₇^2-和S₂O₈^2-离子具有较强荧光识别能力,均有响应时间快,稳定性、选择性、灵敏度高的特点。研究了MOF-1和Tb@MOF-1对Cr₂O₇^2-和S₂O₈^2-的荧光识别机理,其不同可能与Tb³⁺离子掺杂有关。     

多功能Zn（Ⅱ）金属有机骨架荧光传感器检测苯甲醛、四环素、2，4，6-三硝基苯甲酸、氟啶胺、Cr2O72-和Fe3+

成功制备了新型Zn（Ⅱ）金属有机骨架(MOF)[Zn₂(Hdepa)(dya)₂]_n (1)(H₅depa=2,2'',3,4'',5-二苯醚五羧酸,dya=2,2''-二吡啶胺)。单晶X射线衍射分析表明MOF 1由2个Zn²⁺离子与1个Hdepa^4-离子和2个dya分子连接组成,通过氢键形成三维骨架。用粉末X射线衍射和IR表征了配合物1的相纯度。值得注意的是,配合物1具有优异的荧光特性和热稳定性,1的高灵敏度和选择性使其能够作为荧光传感器检测苯甲醛(BZH)、四环素(TC)、2,4,6-三硝基苯酚(TNP)、氟啶胺(Flu)、Cr₂O₇^2-和Fe³⁺。此外,通过荧光寿命分析了Fe³⁺、TC、BZH对MOF 1的荧光的猝灭过程,通过能量转移研究了Fe³⁺、Cr₂O₇^2-、TNP、TC、BZH和Flu的荧光猝灭机理。     

用于痕量监测Zr4+、Cr2O72-、Fe3+、HPO42-和指纹识别的功能化Eu3+/Tb3+配位聚合物荧光探针的构筑

采用芳香族π共轭及含氮原子有机连接剂,合成同构铽、铕发光配位聚合物(CPs){[Eu (PLIA)_1.5(H₂O)₂]·H₂O}_n (1)和{[Tb (PLIA)_1.5(H₂O)₂]·H₂O}_n (2),其中H₂PLIA=5-((吡啶-4-基甲基)氧基)苯-1,3-二甲酸。对合成的配合物进行了结构测定、表征和荧光痕量识别实验研究。2个同构配合物具有理想的三维框架结构,π…π堆积及氢键等弱相互作用增强了其化学稳定性;表征显示配位聚合物1和2具有良好的荧光性质、结晶性、热力学稳定性及结构完整性,可作为荧光传感的材料。1和2对水溶液中的Zr⁴⁺、Cr₂O₇^2-和Fe³⁺、HPO₄^2-具有选择性好、灵敏度高的荧光识别能力,其检出限分别为0.139 μmol·L^-1(1,Zr⁴⁺)、0.626 μmol·L^-1(1,Cr₂O₇^2-)、0.430 μmol·L^-1(2,Fe³⁺)、1.36 μmol·L^-1(2,HPO₄^2-)。探究了1和2作为探针的荧光猝灭机理。更有趣的是,1和2具有指纹识别性能,其荧光指纹纹路清晰连贯,细节明显,可被清晰观察。     

Cr2O3和CrO3/Cr2O3催化剂的2-氯-1，1，1-三氟乙烷气相氟化反应的活性物种和失活

采用沉淀法和浸渍法制备了2种铬基（Cr₂O₃和CrO₃/Cr₂O₃）催化剂,用于气相氟化2-氯-1,1,1-三氟乙烷合成1,1,1,2-四氟乙烷。研究发现含有低价铬（Cr³⁺）物种的Cr₂O₃催化剂上2-氯-1,1,1-三氟乙烷的稳态转化率为18.5%,而含有高价铬（Cr⁶⁺）物种和低价铬（Cr³⁺）物种的CrO₃/Cr₂O₃催化剂初始转化率达到30.6%,然而存在明显的失活。含有Cr⁶⁺物种的CrO₃/Cr₂O₃催化剂的2-氯-1,1,1-三氟乙烷氟化反应初始TOF值为1.71×10^-4 mol_HCFC-133a·mol_Cr(Ⅵ)^-1·s^-1,高于含有Cr³⁺物种的Cr₂O₃催化剂（4.16×10^-5 mol_HCFC-133a·mol_Cr(Ⅲ)^-1·s^-1）。Cr₂O₃催化剂在氟化反应前后催化剂的物相结构保持不变;而含有高价铬物种的CrO₃/Cr₂O₃催化剂经HF反应后生成了CrO_xF_y活性物种。然而,CrO_xF_y物种在反应中挥发或转化成稳定但无活性的CrF₃,从而导致催化剂失活。     

基于6-(3，5-二羧基苯基)烟酸金属有机配位聚合物的构筑及其荧光识别性能

利用混合配体设计、合成了2种新颖的金属有机配位聚合物：[Cd（HDCPN）（1,4-bib）_0.5（H₂O）₂]_n（1）和{[Zn（HDCPN）（1,2bimb）]·H₂O}_n（2）（H₃DCPN=6-（3,5-二羧基苯基）烟酸,1,4-bib=1,4-二（1-咪唑基）苯,1,2-bimb=1,2-二（咪唑-1-基甲基）苯）,并通过单晶X射线衍射、红外光谱（IR）、热重分析（TG）和粉末衍射对配合物1和2进行结构表征。结构分析表明1和2都显示一维链结构,并通过π…π作用堆积成三维网络空间结构。进一步研究了配合物1和2的荧光性能及1在水溶液中对阳离子和阴离子的识别。荧光检测显示,配合物1在水溶液中高灵敏识别Fe³⁺、Cr₂O₇^2-和CrO₄^2-离子。同时研究了配合物1对Fe³⁺、Cr₂O₇^2-和CrO₄^2-的荧光猝灭机理。     

基于二氰根铬的一系列氰根桥联CrⅢ-CuⅡ-CrⅢ三核配合物的合成、结构与磁性

基于一系列二氰根铬与[Cu(cyclam)](ClO₄)₂反应合成了3个氰根桥联Cr^Ⅲ-Cu^Ⅱ-Cr^Ⅲ三核配合物[Cu(cyclam)][Cr(bpmb)(CN)₂]₂·4H₂O(1)(cyclam=1,4,8,11-四氮杂环十四,bpmb^2-=1,2-二(2-吡啶甲酰胺基)-4-甲基苯),[Cu(cyclam)][Cr(bpdmb)(CN)₂]₂(2)(bpdmb^2-=1,2-二(2-吡啶甲酰胺基)-4,5-二甲基苯)和[Cu(cyclam)][Cr(bpClb)(CN)₂]₂·4H₂O(3)(bpClb^2-=1,2-二(2-吡啶甲酰胺基)-4-氯苯)。单晶衍射结果表明:3个化合物是结构类似的中性三核配合物,均含有氰根桥联的Cr(Ⅲ)-CN-Cu(Ⅱ)-NC-Cr(Ⅲ)连接;磁性研究表明:氰根桥在Cr^Ⅲ和Cu^Ⅱ离子间传递弱的铁磁耦合作用,基于自旋哈密顿算符Ĥ=-2J_CrCuŜ_Cu(Ŝ_Cr1+Ŝ_Cr2)拟合得到它们的磁耦合常数分别是J_CrCu=1.53(2) cm^-1(1),0.45(1) cm^-1(2)和0.73(2) cm^-1(3)。     

用于痕量监测Zr4+、Cr2O72-、Fe3+、HPO42-和指纹识别的功能化Eu3+/Tb3+配位聚合物荧光探针的构筑

采用芳香族π共轭及含氮原子有机连接剂,合成同构铽、铕发光配位聚合物(CPs){[Eu(PLIA)_1.5(H₂O)₂]·H₂O}_n (1)和{[Tb(PLIA)_1.5(H₂O)₂]·H₂O}_n (2),其中H₂PLIA=5-((吡啶-4-基甲基)氧基)苯-1,3-二甲酸。对合成的配合物进行了结构测定、表征和荧光痕量识别实验研究。2个同构配合物具有理想的三维框架结构,π…π堆积及氢键等弱相互作用增强了其化学稳定性;表征显示配位聚合物1和2具有良好的荧光性质、结晶性、热力学稳定性及结构完整性,可作为荧光传感的材料。1和2对水溶液中的Zr⁴⁺、Cr₂O₇^2-和Fe³⁺、HPO₄^2-具有选择性好、灵敏度高的荧光识别能力,其检出限分别为0.139 μmol·L^-1(1,Zr⁴⁺)、0.626 μmol·L^-1(1,Cr₂O₇^2-)、0.430 μmol·L^-1(2,Fe³⁺)、1.36 μmol·L^-1(2,HPO₄^2-)。探究了1和2作为探针的荧光猝灭机理。更有趣的是,1和2具有指纹识别性能,其荧光指纹纹路清晰连贯,细节明显,可被清晰观察。     

多功能Zn(Ⅱ)金属有机骨架荧光传感器检测苯甲醛、四环素、2,4,6-三硝基苯甲酸、氟啶胺、Cr2O72-和Fe3+

成功制备了新型 Zn(Ⅱ)金属有机骨架(MOF)[Zn₂(Hdepa)(dya)₂]n (1)(H₅depa=2,2'',3,4'',5-二苯醚五羧酸,dya=2,2''-二吡啶胺)。单晶 X 射线衍射分析表明 MOF 1 由 2 个 Zn²⁺离子与 1 个 Hdepa^4-离子和 2 个 dya 分子连接组成,通过氢键形成三维骨架。用粉末X射线衍射和IR表征了配合物1的相纯度。值得注意的是,配合物1具有优异的荧光特性和热稳定性,1的高灵敏度和选择性使其能够作为荧光传感器检测苯甲醛(BZH)、四环素(TC)、2,4,6-三硝基苯酚(TNP)、氟啶胺(Flu)、Cr₂O₇^2-和Fe³⁺。此外,通过荧光寿命分析了Fe³⁺、TC、BZH对MOF 1的荧光的猝灭过程,通过能量转移研究了Fe³⁺、Cr₂O₇^2-、TNP、TC、BZH和Flu的荧光猝灭机理。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.