Determination of O and OH adsorption sites and coverage in situ on Pt electrodes from Pt L(2,3) X-ray absorption spectroscopy

The adsorption of atomic oxygen and hydroxide on a platinum electrode in 0.1 M HClO4 or H2SO4 electrolytes was studied in situ with Pt L(2,3) X-ray absorption spectroscopy (EXAFS and XANES). The Pt L3 edge absorption data, mu, were collected at room temperature in transmission mode on beamline X-11A at the National Synchrotron Light Source using a custom built cell. The Pt electrode was formed of highly dispersed 1.5-3 nm particles supported on carbon. A novel difference procedure (delta mu = mu(O[H]/Pt) - mu(Pt)) utilizing the L3 XANES spectra at different applied voltages was used to isolate the effects of O[H] (O or OH) adsorption in the XANES spectra. The Deltamu results are compared with results obtained from real-space full-multiple scattering calculations utilizing the FEFF8 code on model clusters. The experimental results, when compared with theoretical calculations, allow the adsorption site to be identified. At low coverages OH adsorbs primarily in 1-fold coordinated atop sites. As the coverage increases, O binds in the bridge/fcc sites, and at still higher coverages above 1.05 V RHE, O adsorbs into a higher coordinated n-fold or subsurface site, which is thought to be the result of Pt-O site exchange and oxide formation. These results are similar to those found in the gas phase. Direct specific adsorption of bisulfate anions in H2SO4 is spectroscopically seen in both the EXAFS and XANES data and is seen to impede oxygen adsorption consistent with previous reports.     

Structural determination of ruthenium-porphyrin complexes relevant to catalytic epoxidation of olefins

A reproducible synthesis of a competent epoxidation catalyst, [Ru(VI)(TPP)(O)2)] (TPP = tetraphenylporphyrin dianion), starting from [Ru(II)(TPP)(CO)L] (L = none or CH3OH), is described. The molecular structure of the complex was determined by using ab initio X-ray powder diffraction (XRPD) methods, and its solution behavior was in detail investigated by NMR techniques such as PGSE (pulsed field gradient spin-echo) measurements. [Ru(IV)(TPP)(OH)]2O, a reported byproduct in the synthesis of [Ru(VI)(TPP)(O)2], was synthesized in a pure form by oxidation of [Ru(II)(TPP)(CO)L] or by a coproportionation reaction of [Ru(VI)(TPP)(O)2] and [Ru(II)(TPP)(CO)L], and its molecular structure was then determined by XRPD analysis. [Ru(VI)(TPP)(O)2] can be reduced by dimethyl sulfoxide or by carbon monoxide to yield [Ru(II)(TPP)(S-DMSO)2] or [Ru(II)(TPP)(CO)(H2O)], respectively. These two species were characterized by conventional single-crystal X-ray diffraction analysis.     

High-nuclearity ruthenium carbonyl cluster complexes derived from 2-amino-6-methylpyridine: synthesis of nonanuclear derivatives containing mu4- and mu5-oxo ligands

Nonanuclear cluster complexes [Ru9(mu3-H)2(mu-H)(mu5-O)(mu4-ampy)(mu3-Hampy)(CO)21] (4) (H2ampy = 2-amino-6-methylpyridine), [Ru9(mu5-O)2(mu4-ampy)(mu3-Hampy)2(mu-CO)(CO)20] (5), [Ru9(mu5-O)2(mu4-ampy)(mu3-Hampy)2(mu-CO)2(CO)19] (6), and [Ru9(mu4-O)(mu5-O)(mu4-ampy)(mu3-Hampy)(mu-Hampy)(mu-CO)(CO)19] (7), together with the known hexanuclear [Ru6(mu3-H)2(mu5-ampy)(mu-CO)2(CO)14] (2) and the novel pentanuclear [Ru5(mu4-ampy)(2)(mu-CO)(CO)12] (3) complexes, are products of the thermolysis of [Ru3(mu-H)(mu3-Hampy)(CO)9] (1) in decane at 150 degrees C. Two different and very unusual quadruply bridging coordination modes have been observed for the ampy ligand. Compounds 4-7 also feature one (4) or two (5-7) bridging oxo ligands. With the exception of one of the oxo ligands of 7, which is in a distorted tetrahedral environment, the remaining oxo ligands of 4-7 are surrounded by five metal atoms. In carbonyl metal clusters, quadruply bridging oxo ligands are very unusual, whereas quintuply bridging oxo ligands are unprecedented. By using 18O-labeled water, we have unambiguously established that these oxo ligands arise from water.     

Metal-metal charge transfer and solvatochromism in cyanomanganese carbonyl complexes of ruthenium and osmium

The complexes [(H3N)5Ru(II)(mu-NC)Mn(I)Lx]2+, prepared from [Ru(OH2)(NH3)5]2+ and [Mn(CN)L(x)] {L(x) = trans-(CO)2{P(OPh)3}(dppm); cis-(CO)2(PR3)(dppm), R = OEt or OPh; (PR3)(NO)(eta-C5H4Me), R = Ph or OPh}, undergo two sequential one-electron oxidations, the first at the ruthenium centre to give [(H3N)5Ru(III)(mu-NC)Mn(I)Lx]3+; the osmium(III) analogues [(H3N)5Os(III)(mu-NC)Mn(I)Lx]3+ were prepared directly from [Os(NH3)5(O3SCF3)]2+ and [Mn(CN)Lx]. Cyclic voltammetry and electronic spectroscopy show that the strong solvatochromism of the trications depends on the hydrogen-bond accepting properties of the solvent. Extensive hydrogen bonding is also observed in the crystal structures of [(H3N)5Ru(III)(mu-NC)Mn(I)(PPh3)(NO)(eta-C5H4Me)][PF6]3.2Me2CO.1.5Et2O, [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)(dppm)2-trans][PF6]3.5Me2CO and [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)2{P(OEt)3}(dppm)-trans][PF6]3.4Me2CO, between the amine groups (the H-bond donors) at the Ru(III) site and the oxygen atoms of solvent molecules or the fluorine atoms of the [PF6]- counterions (the H-bond acceptors).     

Reactivity of alkynes containing alpha-hydrogen atoms with a triruthenium hydrido carbonyl cluster: alkenyl versus allyl cluster derivatives

The reactions of the hydrido-triruthenium cluster complex [Ru3(mu-H)(mu3-kappa(2)-HNNMe2)(CO)9] (1; H2NNMe2 = 1,1-dimethylhydrazine) with alkynes that have alpha-hydrogen atoms give trinuclear derivatives containing edge-bridging allyl or face-capping alkenyl ligands. Under mild conditions (THF, 70 degrees C) the isolated products are as follows: [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(3)-1-syn-Me-3-anti-EtC3H3)(mu-CO)2(CO)6] (2) and [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(3)-1-syn-Me-3-syn-EtC3H3)(mu-CO)2(CO)6] (3) from 3-hexyne; [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(3)-3-anti-PhC3H4)(mu-CO)2(CO)6] (4), [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(2)-MeCCHPh)(mu-CO)2(CO)6] (5) and [Ru3(mu3-kappa(2)-HNNMe2)(mu3-kappa(2)-PhCCHMe)(mu-CO)2(CO)6] (6) from 1-phenyl-1-propyne; [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(2)-3-anti-PrC3H4)(mu-CO)2(CO)6] (7), [Ru3(mu3-kappa(2)-HNNMe2)(mu3-kappa(2)-BuCCH2)(mu-CO)2(CO)6] (8), and [Ru3(mu3-kappa(2)-HNNMe2)(mu3-kappa(2)-HCCHBu)(mu-CO)2(CO)6] (9) from 1-hexyne; [Ru3(mu3-kappa(2)-HNNMe2)(mu3-kappa(2)-HOH2CCCH2)(mu-CO)2(CO)6] (10) from propargyl alcohol; and [Ru3(mu3-kappa(2)-HNNMe2)(mu3-kappa(2)-MeOCH2CCH2)(mu-CO)2(CO)6] (11) from 3-methoxy-1-propyne. The regioselectivity of these reactions depends upon the nature of the alkyne reagent, which affects considerably the kinetic barriers of important reaction steps and the stability of the final products. It has been established that the face-capped alkenyl derivatives are not precursors to the allyl products, which are formed via edge-bridged alkenyl intermediates. At higher temperature (toluene, 110 degrees C), the complexes that have allyl ligands with an anti substituent are isomerized into allyl derivatives with that substituent in the syn position, for example, 4 into [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(3)-3-syn-PhC3H4)(mu-CO)2(CO)6] (14). The diene complex [Ru3(mu-H)(mu3-kappa(2)-HNNMe2)(mu-kappa(4)-trans-EtC4H5)(CO)7] (13) has been obtained from the thermolysis of compounds 2 and 7 at 110 degrees C (3 and [Ru3(mu3-kappa(2)-HNNMe2)(mu-kappa(2)-3-syn-PrC3H4)(mu-CO)2(CO)6] (12) are also formed in these reactions). A DFT theoretical study has allowed a comparison of the thermodynamic stabilities of isomeric compounds and has helped rationalize the experimental results. Mechanistic proposals for the synthesis of the allyl complexes and their isomerization processes are also provided.     

Photodissociation of CO from [Ru3(mu3-O)(mu-OOCCH3)6(CO)L2] in acetonitrile, where L = pyridine, 4-cyanopyridine and methanol

Photodissociation of CO from oxo-centered trinuclear ruthenium clusters [Ru3(mu3-O)(mu-OOCCH3)6(CO)L2] (L = pyridine (py): 1; 4-cyanopyridine (cpy): 2; methanol: 3) dissolved in organic solvents has been examined. Upon photolysis (> or = 290 nm, a 450-W Xe lamp), an absorption peak at 585 nm observed for 1 in CH3CN decreases its intensity and a new absorption band appears and grows at 896 nm. This spectral change, presenting isosbestic points, corresponds to photosubstitution of CO in 1 to form [Ru3(mu3-O)(mu-OOCCH3)6(CH3CN)(py)2] 4. Photoexcitation of carbonyl complexes 2 and 3 in CH3CN also affords the corresponding CH3CN-coordinated complexes [Ru3(mu3-O)(mu-OOCCH3)6(CH3CN)(cpy)2] 6 and [Ru3(mu3-O)(mu-OOCCH3)6(CH3CN)3] 7, respectively. The photosubstitution reactions (excitation wavelength, > or = 290 nm) are well described by the first-order kinetics: k = 7.3 x 10(-4) s(-1) for 1, 4.9 x 10(-4) s(-1) for 2 and 5.1 x 10(-4) s(-1) for 3 (298 K). In the presence of a 100-fold excess of py, photolysis of 1 yields a tris(py) complex [Ru3(mu3-O)(mu-OOCCH3)6(py)3] 5 via photochemical loss of CO followed by coordination of py. The overall reaction (photochemical and thermal) is also confirmed by 1H NMR spectroscopy. The dissociative character of the photosubstitution is supported by negligible effects of the concentration of the entering pyridine molecule, the nature of solvents and the type of terminal monodentate ligands (other than CO) attached to the cluster. Quantum yield measurements with varied excitation wavelengths have shown that absorption bands located in the UV region (< 400 nm) play a principal role in photosubstitution, whereas an absorption band in the visible region (centered at approximately 580 nm), ascribed to an "intracluster" charge transfer, is not at all responsible for photosubstitution.     

Mixed-metal cluster chemistry. 28. Core enlargement of tungsten-iridium clusters with alkynyl, ethyndiyl, and butadiyndiyl reagents

Reaction of [WIr3(mu-CO)3(CO)8(eta-C5Me5)] (1c) with [W(C[triple bond]CPh)(CO)3(eta-C5H5)] afforded the edge-bridged tetrahedral cluster [W2Ir3(mu4-eta2-C2Ph)(mu-CO)(CO)9(eta-C5H5)(eta-C5Me5)] (3) and the edge-bridged trigonal-bipyramidal cluster [W3Ir3(mu4-eta2-C2Ph)(mu-eta2-C=CHPh)(Cl)(CO)8(eta-C5Me5)(eta-C5H5)2] (4) in poor to fair yield. Cluster 3 forms by insertion of [W(C[triple bond]CPh)(CO)3(eta-C5H5)] into Ir-Ir and W-Ir bonds, accompanied by a change in coordination mode from a terminally bonded alkynyl to a mu4-eta2 alkynyl ligand. Cluster 4 contains an alkynyl ligand interacting with two iridium atoms and two tungsten atoms in a mu4-eta2 fashion, as well as a vinylidene ligand bridging a W-W bond. Reaction of [WIr3(CO)11(eta-C5H5)] (1a) or 1c with [(eta-C5H5)(CO)2 Ru(C[triple bond]C)Ru(CO)2(eta-C5H5)] afforded [Ru2WIr3(mu5-eta2-C2)(mu-CO)3(CO)7(eta-C5H5)2(eta-C5R5)] [R = H (5a), Me (5c)] in low yield, a structural study of 5a revealing a WIr3 butterfly core capped and spiked by Ru atoms; the diruthenium ethyndiyl precursor has undergone Ru-C scission, with insertion of the C2 unit into a W-Ir bond of the cluster precursor. Reaction of [W2Ir2(CO)10(eta-C5H5)2] with the diruthenium ethyndiyl reagent gave [RuW2Ir2{mu4-eta2-(C2C[triple bond]C)Ru(CO)2(eta-C5H5)}(mu-CO)2(CO)6(eta-C5H5)3] (6) in low yield, a structural study of 6 revealing a butterfly W2Ir2 unit capped by a Ru(eta-C5H5) group resulting from Ru-C scission; the terminal C2 of a new ruthenium-bound butadiyndiyl ligand has been inserted into the W-Ir bond. Reaction between 1a, [WIr3(CO)11(eta-C5H4Me)] (1b), or 1c and [(eta-C5H5)(CO)3W(C[triple bond]CC[triple bond]C)W(CO)3(eta-C5H5)] afforded [W2Ir3{mu4-eta2-(C2C[triple bond]C)W(CO)3(eta-C5H5)}(mu-CO)2(CO)2(eta-C5H5)(eta-C5R5)] [R = H (7a), Me (7c); R5 = H4Me (7b)] in good yield, a structural study of 7c revealing it to be a metallaethynyl analogue of 3.     

Synthesis, characterization, and crystal structures of two novel high-nuclear nickel-substituted dimeric polyoxometalates

Two novel high-nuclear Ni-substituted polyoxometalates Na9K[Ni7(OH)4(H2O)(CO3)2(HCO3)(A-alpha-SiW9O34)(beta-SiW10O37)].5H3O.18H2O (1) and K6Na4[{Ni6(H2O)4(mu2-H2O)4(mu3-OH)2}(x-SiW9O34)2].17.5H2O (2) have been obtained by reaction of K(8)[gamma-SiW10O36] with NiCl2.2H2O in basic conditions. Compounds 1 and 2 all represent the first polyoxometalates substituted by seven and six Ni centers, respectively. Also, compound 1 exhibits a novel asymmetric dimeric structure, composed of [A-alpha-SiW9O34]10- and [beta-SiW10O37]10- units linked by a Ni7 cluster and three carbonates, which exhibit tri- and bidentate coordination modes in 1.     

Synthesis of Ru-Pt and Ru-Pd mixed-metal imido clusters from a diruthenium imido-methylene scaffold [(Cp*Ru)2(mu2-NPh)(mu2-CH2)

The diruthenium mu2-imido mu2-methylene complex [(Cp*Ru)2(mu2-NPh)(mu2-CH2)] serves as a bifunctional scaffold for cluster synthesis, producing a mu3-imido Ru2Pt cluster [(Cp*Ru)2(mu3-NPh)(mu2-CH2)Pt(PMe3)2] on treatment with [Pt(eta2-C2H4)(PMe3)2] and a mu3-methylidyne Ru4Pd2 cluster [(Cp*Ru)2(mu2-NPh)(mu3-CH)PdCl]2 with [PdMeCl(cod)].     

Barrel- and crown-shaped dodecanuclear copper(II) cages built from phosphonate, pyrazole, and hydroxide ligands

The reaction of Cu(ClO4)2. 6H2O with t-BuP(O)(OH)2 and 3,5-(CF3)2PzH in the presence of triethylamine afforded the dodecanuclear cage ([Et3NH]2[Cu12(mu-3,5-(CF3)2Pz)6(mu3-OH)6(mu-OH)3(mu3-t-BuPO3)2(mu6-t-BuPO3)3][t-BuPO2OH][C6H5CH3]2) (2). The molecular structure of this cage revealed that it possesses a barrel-shaped architechture. The cage structure is built by the cumulative coordination action of phosphonate, hydroxide, and pyrazolyl ligands. A similar reaction involving Cu(NO3)2. 3H2O, t-BuP(O)(OH)2, 3,5-dimethylpyrazole, and triethylamine afforded another dodecanuclear cage [Cu12(mu-DMPz)8(eta1-DMPzH)2(mu4-O)2(mu3-OH)4(mu3- t-BuPO3)4].3MeOH (3). The latter is crown-shaped and is built by the coordination of pyrazole, pyrazolyl, phosphonate, hydroxide, oxide, and methanol ligands. Both of the dodecanuclear cages are efficient nucleases in the presence of magnesium monoperoxyphthalate.     

Ruthenium-cluster-mediated activation of all bonds of a methyl group of 6,6'-dimethyl-2,2'-bipyridine and 2,9-dimethyl-1,10-phenanthroline: transformation of the latter into a 2-alkenyl-9-methyl-1,10-phenanthroline ligand

The treatment of [Ru3(CO)12] with 6,6'-dimethyl-2,2'-bipyridine (Me2bipy) or 2,9-dimethyl-1,10-phenanthroline (Me2phen) in THF at reflux temperature gives the trinuclear dihydride complexes [Ru3(mu-H)2(mu3-L1)(CO)8] (L1 = HCbipyMe 1 a, HCphenMe 1 b), which result from the activation of two C-H bonds of a methyl group. The hexa-, hepta-, and pentanuclear derivatives [Ru6(mu3-H)(mu5-L2)(mu-CO)3(CO)13] (L2 = CbipyMe 2 a, CphenMe 2 b), [Ru7(mu3-H)(mu5-L2)(mu-CO)2(CO)16] (L2 = CbipyMe 3 a, CphenMe 3 b), and [Ru5(mu-H)(mu5-C)(mu-L3)(CO)13] (L3 = bipyMe 4 a, phenMe 4 b) can also be obtained by treating 1 a and 1 b with [Ru3(CO)12]. Compounds 2 a and 2 b have a basal edge-bridged square-pyramidal metallic skeleton with a carbyne-type C atom capping the four Ru atoms of the pyramid base. The structures of 3 a and 3 b are similar to those of 2 a and 2 b, respectively, but an additional Ru atom now caps a triangular face of the square-pyramidal fragment of the metallic skeleton. The most interesting feature of 2 a, 2 b, 3 a, and 3 b is that their carbyne-type C atoms were originally bound to three hydrogen atoms in Me2bipy or Me2phen and, therefore, they arise from the unprecedented activation of all three C-H bonds of C-bound methyl groups. The pentanuclear compounds 4 a and 4 b contain a carbide ligand surrounded by five Ru atoms in a distorted trigonal-bipyramidal environment. They are the products of a series of processes that includes the activation of all bonds (three C-H and one C-C) of organic methyl groups, and are the first examples of complexes having carbide ligands that arise from C-bonded methyl groups. The alkenyl derivatives [Ru5(mu5-C)(mu-p-MeC6H4CHCHphenMe)(CO)13] (5 b), [Ru5(mu-H)(mu5-C)(mu-p-MeC6H4CHCHphenMe)(p-tolC2)(CO)12] (6 b), and [Ru5(mu-H)(mu5-C)(mu-PhCHCHphenMe)(PhC2)(CO)12] (7 b) have been obtained by treating 4 b with p-tolyl- and phenylacetylene, respectively. Their heterocyclic ligands contain an alkenyl fragment in the position that was originally occupied by a methyl group. Therefore, these complexes are the result of the formal substitution of an alkenyl group for a methyl group of 2,9-dimethyl-1,10- phenanthroline.     

Synthesis, characterisation, crystal structures, reactivity, and electrochemistry of ruthenium-nitrido, ruthenium-cobalt-imido and ruthenapyrrolidone carbonyl clusters containing alkyne ligands

Thermolysis of [Ru3(CO)9(mu3-NOMe)(mu3-eta2-PhC2Ph)] (1) with two equivalents of [Cp*Co(CO)2] in THF afforded four new clusters, brown [Ru5(CO)8(mu-CO)3(eta5-C5Me5)(mu5-N)(mu4-eta2-PhC2Ph)] (2), green [Ru3Co2(CO)7(mu3-CO)(eta5-C5Me5)2(mu3-NH)[mu4-eta8-C6H4-C(H)C(Ph)]] (3), orange [Ru3(CO)7(mu-eta6-C5Me4CH2)[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (4) and pale yellow [Ru2(CO)6[mu-eta3-PhC2(Ph)C(O)N(OMe)]] (5). Cluster 2 is a pentaruthenium mu5-nitrido complex, in which the five metal atoms are arranged in a novel "spiked" square-planar metal skeleton with a quadruply bridging alkyne ligand. The mu5-nitrido N atom exhibits an unusually low frequency chemical shift in its 15N NMR spectrum. Cluster 3 contains a triangular Ru2Co-imido moiety linked to a ruthenium-cobaltocene through the mu4-eta8-C6H4C(H)C(Ph) ligand. Clusters 4 and 5 are both metallapyrrolidone complexes, in which interaction of diphenylacetylene with CO and the NOMe nitrene moiety were observed. In 4, one methyl group of the Cp* ring is activated and interacts with a ruthenium atom. The "distorted" Ru3Co butterfly nitrido complex [Ru3Co(CO)5(eta5-C5Me5)(mu4-N)(mu3-eta2-PhC2Ph)(mu-I)2I] (6) was isolated from the reaction of 1 with [Cp*Co(CO)I2] heated under reflux in THF, in which a Ru-Ru wing edge is missing. Two bridging and one terminal iodides were found to be placed along the two Ru-Ru wing edges and at a hinge Ru atom, respectively. The redox properties of the selected compounds in this study were investigated by using cyclic voltammetry and controlled potential coulometry. 15N magnetic resonance spectroscopy studies were also performed on these clusters.     

Diruthenium dithiolato cyanides: basic reactivity studies and a post hoc examination of nature's choice of Fe versus Ru for hydrogenogenesis

The reaction of Ru2(S2C3H6)(CO)6 (1) with 2 equiv of Et4NCN yielded (Et4N)2[Ru2(S2C3H6)(CN)2(CO)4], (Et4N)2[3], which was shown crystallographically to consist of a face-sharing bioctahedron with the cyanide ligands in the axial positions, trans to the Ru-Ru bond. Competition experiments showed that 1 underwent cyanation >100x more rapidly than the analogous Fe2(S2C3H6)(CO)6. Furthermore, Ru2(S2C3H6)(CO)6 underwent dicyanation faster than [Ru2(S2C3H6)(CN)(CO)5]-, implicating a highly electrophilic intermediate [Ru2(S2C3H6)(mu-CO)(CN)(CO)5]-. Ru2(S2C3H6)(CO)6 (1) is noticeably more basic than the diiron compound, as demonstrated by the generation of [Ru2(S2C3H6)(mu-H)(CO)6]+, [1H]+. In contrast to 1, the complex [1H]+ is unstable in MeCN solution and converts to [Ru2(S2C3H6)(mu-H)(CO)5(MeCN)]+. (Et4N)2[3] was shown to protonate with HOAc (pKa = 22.3, MeCN) and, slowly, with MeOH and H2O. Dicyanide [3]2- is stable toward excess acid, unlike the diiron complex; it slowly forms the coordination polymer [Ru2(S2C3H6)(mu-H)(CN)(CNH)(CO)4]n, which can be deprotonated with Et3N to regenerate [H3]-. Electrochemical experiments demonstrate that [3H]- catalyzes proton reduction at -1.8 V vs Ag/AgCl. In contrast to [3]2-, the CO ligands in [3H]- undergo displacement. For example, PMe3 and [3H]- react to produce [Ru2(S2C3H6)(mu-H)(CN)2(CO)3(PMe3)]-. Oxidation of (Et4N)2[3] with 1 equiv of Cp2Fe+ gave a mixture of [Ru2(S2C3H6)(mu-CO)(CN)3(CO)3]- and [Ru2(S2C3H6)(CN)(CO)5]-, via a proposed [Ru2]2(mu-CN) intermediate. Overall, the ruthenium analogues of the diiron dithiolates exhibit reactivity highly reminiscent of the diiron species, but the products are more robust and the catalytic properties appear to be less promising.     

Interplay of cubic building blocks in (et6-arene)ruthenium-containing tungsten and molybdenum oxides

A series of molybdenum and tungsten organometallic oxides containing [Ru(arene)]2+ units (arene =p-cymene, C6Me6) was obtained by condensation of [[Ru(arene)Cl2]2] with oxomolybdates and oxotungstates in aqueous or nonaqueous solvents. The crystal structures of [[Ru(eta6-C6Me6]]4W4O16], [[Ru(eta6-p-MeC6H4iPr]]4W2O10], [[[Ru-(eta6-p-MeC6H4iPr)]2(mu-OH)3]2][[Ru(eta6-p-MeC6H4iPr)]2W8O28(OH)2[Ru(eta6-p-MeC6H4iPr)(H2O)]2], and [[Ru(eta6-C6Me6)]2M5O18[Ru(eta6-C6Me6)(H2O)]] (M = Mo, W) have been determined. While the windmill-type clusters [[Ru(eta6-arene)]4(MO3)4(mu3-O)4] (M = Mo, W; arene =p-MeC6H4iPr, C6Me6), the face-sharing double cubane-type cluster [[Ru(eta6-p-MeC6H4iPr)]4(WO2)2(mu3-O)4(mu4-O)2], and the dimeric cluster [[Ru(eta6-p-MeC6H4iPr)(WO3)3(mu3-O)3(mu3-OH)Ru(eta6-pMeC6H4iPr)(H2O)]2(mu-WO2)2]2- are based on cubane-like units, [(Ru(eta6-C6Me6)]2M5O18[Ru(eta6-C6Me6)(H2O)]] (M = Mo, W) are more properly described as lacunary Lindqvist-type polyoxoanions supporting three ruthenium centers. Precubane clusters [[Ru(eta6-arene)](MO3)2(mu-O)3(mu3-O)]6- are possible intermediates in the formation of these clusters. The cluster structures are retained in solution, except for [[Ru(eta6-p-MeC6H4iPr)]4Mo4O16], which isomerizes to the triple-cubane form.     

Reactivity of triruthenium thiophyne and furyne clusters: competitive S-C and P-C bond cleavage reactions and the generation of highly unsymmetrical alkyne ligands

The synthesis and reactivity of the thiophyne and furyne clusters [Ru3(CO)7(mu-dppm)(mu3-eta2-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, O) is reported. Addition of P(C4H3E)3 to [Ru3(CO)10(mu-dppm)] (1) at room temperature in the presence of Me3NO gives simple substitution products [Ru3(CO)9(mu-dppm)(P(C4H3E)3)] (E = S, 2; E = O, 3). Mild thermolysis in the presence of further Me3NO affords the thiophyne and furyne complexes [Ru3(CO)7(mu-dppm)(mu3-eta2-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, 4; E = O, 6) resulting from both carbon-hydrogen and carbon-phosphorus bond activation. In each the C4H2E (E = S, O) ligand donates 4-electrons to the cluster and the rings are tilted with respect to the mu-dppm and the phosphido-bridged open triruthenium unit. Heating 4 at 80 degrees C leads to the formation of the ring-opened cluster [Ru3(CO)5(mu-CO)(mu-dppm)(mu3-eta3-SC4H3)(mu-P(C4H3S)2)] (5) resulting from carbon-sulfur bond scission and carbon-hydrogen bond formation and containing a ring-opened mu3-eta3-1-thia-1,3-butadiene ligand. In contrast, a similar thermolysis of 3 affords the phosphinidene cluster [Ru3(CO)7(mu-dppm)(mu3-eta2-C4H2O)(mu3-P(C4H3O))] (7) resulting from a second phosphorus-carbon bond cleavage and (presumably) elimination of furan. Treatment of 4 and 6 with PPh3 affords the simple phosphine-substituted products [Ru3(CO)6(PPh3)(mu-dppm)(mu3-eta2-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, 8; E = O, 9). Both thiophyne and furyne clusters 4 and 6 readily react with hydrogen bromide to give [Ru3(CO)6Br(mu-Br)(mu-dppm)(mu3-eta2-eta1-C4H2E)(mu-P(C4H3E)2)(mu-H)] (E = S, 10; E = O, 11) containing both terminal and bridging bromides. Here the alkynes bind in a highly unsymmetrical manner with one carbon acting as a bridging alkylidene and the second as a terminally bonded Fisher carbene. As far as we are aware, this binding mode has only previously been noted in ynamine complexes or those with metals in different oxidation states. The crystal structures of seven of these new triruthenium clusters have been carried out, allowing a detailed analysis of the relative orientations of coordinated ligands.     

Reactivity of the heterometallic clusters [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides, including selenium transfer. Crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)], [MCo2(mu3-Se)(CO)7(mu-dppy)], and [RuCo2(mu3-Se)(CO)7(mu-dppm)] [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2

The reactivity of [HMCo3(CO)12] and [Et4N][MCo3(CO)12] (M = Fe, Ru) toward phosphine selenides such as Ph3PSe, Ph2P(Se)CH2PPh2, Ph2(2-C5H4N)PSe, Ph2(2-C4H3S)PSe, and Ph2[(2-C5H4N)(2-C4H2S)]PSe has been studied with the aim to obtain new selenido-carbonyl bimetallic clusters. The reactions of the hydrido clusters give two main classes of products: (i) triangular clusters with a mu3-Se capping ligand of the type [MCo2(mu3-Se)(CO)(9-x)L(y)] resulting from the selenium transfer (x = y = 1, 2, with L = monodentate ligand; x = 2, 4, and y = 1, 2, with L = bidentate ligand) (M = Fe, Ru) and (ii) tetranuclear clusters of the type [HMCo3(CO)12xL(y)] obtained by simple substitution of axial, Co-bound carbonyl groups by the deselenized phosphine ligand. The crystal structures of [HRuCo3(CO)7(mu-CO)3(mu-dppy)] (1), [MCo2(mu3-Se)(CO)7(mu-dppy)] (M = Fe (16) or Ru (2)), and [RuCo2(mu3-Se)(CO)7(mu-dppm)] (12) are reported [dppy = Ph2(2-C5H4N)P, dppm = Ph2PCH2PPh2]. Clusters 2, 12, and 16 are the first examples of trinuclear bimetallic selenido clusters substituted by phosphines. Their core consists of metal triangles capped by a mu3-selenium atom with the bidentate ligand bridging two metals in equatorial positions. The core of cluster 1 consists of a RuCo3 tetrahedron, each Co-Co bond being bridged by a carbonyl group and one further bridged by a dppy ligand. The coordination of dppy in a pseudoaxial position causes the migration of the hydride ligand to the Ru(mu-H)Co edge. In contrast to the reactions of the hydrido clusters, those with the anionic clusters [MCo3(CO)12]- do not lead to Se transfer from phosphorus to the cluster but only to CO substitution by the deselenized phosphine.     

Reactions of [Ru(H(2)O)(6)](2+) with water-soluble tertiary phosphines

In aqueous solutions under mild conditions, [Ru(H(2)O)(6)](2+) was reacted with various water-soluble tertiary phosphines. As determined by multinuclear NMR spectroscopy, reactions with the sulfonated arylphosphines L =mtppms, ptppms and mtppts yielded only the mono- and bisphosphine complexes, [Ru(H(2)O)(5)L](2+), cis-[Ru(H(2)O)(4)L(2)](2+), and trans-[Ru(H(2)O)(4)L(2)](2+) even in a high ligand excess. With the small aliphatic phosphine L = 1,3,5-triaza-7-phosphatricyclo-[3.3.1.1(3,7)]decane (pta) at [L]:[Ru]= 12:1, the tris- and tetrakisphosphino species, [Ru(H(2)O)(3)(pta)(3)](2+), [Ru(H(2)O)(2)(pta)(4)](2+), [Ru(H(2)O)(OH)(pta)(4)](+), and [Ru(OH)(2)(pta)(4)] were also detected, albeit in minor quantities. These results have significance for the in situ preparation of Ru(II)-tertiary phosphine catalysts. The structures of the complexes trans-[Ru(H(2)O)(4)(ptaMe)(2)](tos)(4)x2H(2)O, trans-[Ru(H(2)O)(4)(ptaH)(2)](tos)(4)[middle dot]2H(2)O, and trans-mer-[RuI(2)(H(2)O)(ptaMe)(3)]I(3)x2H(2)O, containing protonated or methylated pta ligands (ptaH and ptaMe, respectively) were determined by single crystal X-ray diffraction.     

Structure and magnetic ordering of KxH1-xNi(OH2)4[Ru2(CO3)4].zH2O

K(x)H(1-x)Ni(OH2)4[Ru2(CO3)4].zH2O is a ferrimagnet (Tc = 4.3 K) formed from the reaction of K3[Ru(II/III)2(CO3)4] and Ni(II) in water. It possesses a new 3-D network structural motif composed of linked chains and mu3-CO3 linkages to both Ru and Ni sites. Each Ni(II) bonds to four oxygens and to two [Ru2(CO3)4]3- moieties in a cis manner, and four mu3-CO3 groups from each [Ru2(CO3)4](3-) have two oxygens bonding to the Ru2 moiety, forming the typical paddle-wheel core, and trans pairs of the third CO32- oxygen axially bonded to either another Ru2 or Ni(II).     

Addition of Pt(PBu(t)(3)) groups to Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C). Synthesis, structures, and dynamical activity

The reaction of Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(5)-C), 7, with Pt(PBu(t)(3))(2) yielded two products Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))], 8, and Ru(5)(CO)(12)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](2), 9. Compound 8 contains a Ru(5)Pt metal core in an open octahedral structure. In solution, 8 exists as a mixture of two isomers that interconvert rapidly on the NMR time scale at 20 degrees C, DeltaH() = 7.1(1) kcal mol(-1), DeltaS() = -5.1(6) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 8.6(3) kcal mol(-1). Compound 9 is structurally similar to 8, but has an additional Pt(PBu(t)(3)) group bridging an Ru-Ru edge of the cluster. The two Pt(PBu(t)(3)) groups in 9 rapidly exchange on the NMR time scale at 70 degrees C, DeltaH(#) = 9.2(3) kcal mol(-)(1), DeltaS(#) = -5(1) cal mol(-)(1) K(-)(1), and DeltaG(298)(#) = 10.7(7) kcal mol(-1). Compound 8 reacts with hydrogen to give the dihydrido complex Ru(5)(CO)(11)(eta(6)-C(6)H(6))(mu(6)-C)[Pt(PBu(t)(3))](mu-H)(2), 10, in 59% yield. This compound consists of a closed Ru(5)Pt octahedron with two hydride ligands bridging two of the four Pt-Ru bonds.     

Mononuclear and dinuclear complexes with a [Ru(tBu2PCH2CH2PtBu2)(CO)] core

Thermolysis of solid [Ru(d(t)bpe)(CO)2Cl2](2, d(t)bpe =(t)Bu2PCH2CH2P(t)Bu2) under vacuum affords the five-coordinate complex [Ru(d(t)bpe)(CO)Cl2] (4), which was shown by X-ray crystallography to contain a weak remote agostic interaction. In solution, 4 can be readily trapped by CO, CH3CN or water to give [Ru(d(t)bpe)(CO)(L)Cl2](L = CO, 2; L = CH3CN, 6; L = H2O, 7). Reaction of 4 with AgOTf/H2O yields the tris-aqua complex [Ru(d(t)bpe)(CO)(H2O)3](OTf)2 (8), which has been structurally characterised and probed in solution by pulsed-gradient spin echo (PGSE) NMR spectroscopy. The water ligands in 8 are labile and easily substituted to give [Ru(d(t)bpe)(CO)(NCCH3)3](OTf)2 (10) and [Ru(d(t)bpe)(CO)(DMSO)3](OTf)2 (11). In the presence of CO, the tris-aqua complex undergoes water-gas shift chemistry with formation of the cationic hydride species [Ru(d(t)bpe)(CO)3H](OTf) (12) and CO2. X-Ray crystal structures of complexes 2, 4, 6, 8 and 11-12 are reported along with those for [{Ru(d(t)bpe)(CO)}2(mu-Cl)2(mu-OTf)](OTf) (3), [{Ru(d(t)bpe)(CO)}2(mu-Cl)3][Ru(d(t)bpe)(CO)Cl3](5) and [Ru(d(t)bpe)(CO)(H2O)2(OTf)](OTf)(9).