Influence of suspended particles on the structure of a turbulent flow in a tube

The results of an experimental investigation into the dispersed flow of a system subject to negative pressure gradients are presented. The measurements were based on an optical time-of-flight method in a water channel, using polystyrene spheres as the solid phase. The average and pulsational characteristics of the dispersed flow were obtained in the boundary (wall) region and also in the center (core) of the flow. For zero pressure gradient the influence of the solid phase expressed itself as a reduction in the level of turbulence and an increase in the extent of the viscous sublayer, leading to a fall in the coefficient of friction. For a negative pressure gradient the pressure of the solid phase generated small-scale vortices, reduced the extent of the viscous sublayer, and hence increased the coefficient of surface friction.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 2, pp. 111–118, March–April, 1976.The author wishes to thank Yu. A. Buevich for interest in this work and V. L. Zalukaev for participation in the experiments.     

Investigation of a hypersonic viscous shock layer on rotating axisymmetric bodies in the presence of blowing

The hypersonic flow of a laminar stream of viscous compressible gas past blunt axisyrametric bodies rotating about the longitudinal axis is considered. It is assumed that gas blows from the surface of the body. The solution of the problem is obtained by a finite-difference method in a wide range of Reynolds numbers and blowing and rotation parameters. Some results of the calculations characterizing the effect of the rotation on the velocity and temperature profiles across the shock layer, on the friction and heat transfer coefficients, and the shock wave separation are given for the neighborhood of the stagnation point. For large Reynolds numbers and strong blowing an analytic solution of the problem is found in an approximation of two inviscid layers separated by a contact surface. The calculations are made for the flow past a sphere and a paraboloid and it is shown that in the presence of rotation the maximum of the heat flux is shifted from the stagnation point onto the side surface of the body. The dependence of the pressure distribution, the heat flux, and the friction coefficient is investigated for cases of constant and variable blowing over the contour of the body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 106–114, January–February, 1986.     

Analytic investigation of friction and heat transfer in the neighborhood of a three-dimensional stagnation point at low and moderate Reynolds numbers

A study is made of hypersonic three-dimensional flow of a viscous gas past blunt bodies at low and moderate Reynolds numbers with allowance for the effects of slip and a jump of the temperature across the surface. The equations of the three-dimensional viscous shock layer are solved by an integral method of successive approximation and a finite-difference method in the neighborhood of the stagnation point. In the first approximation of the method an analytic solution to the problem is found. Analysis of the obtained solution leads to the proposal of a simple formula by means of which the calculation of the heat flux to a three-dimensional stagnation point is reduced to the calculation of the heat flux to an axisymmetric stagnation point. A formula for the relative heat flux obtained by generalizing Cheng's well-known formula [1] is given. The accuracy and range of applicability of the obtained expressions are estimated by comparing the analytic and numerical solutions. Three-dimensional problems of the theory of a supersonic viscous shock layer at small Reynolds numbers were considered earlier in [2–5] in a similar formulation but without allowance for the effects of slip.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 143–150, March–April, 1988.     

One-dimensional and two-dimensional analogs for three-dimensional viscous flows in the neighborhood of the plane of symmetry of a blunt body

An approximate method of determining the heat transfer and friction stress in three-dimensional flow problems using the two-dimensional and one-dimensional solutions is proposed. This method is applicable over a wide range of Reynolds numbers — from low to high. On the basis of a theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer it is shown that the problem of determining the heat flux in the neighborhood of the plane of symmetry of bodies inclined to the flow at an angle of attack can be reduced, firstly, to the problem of determining that quantity for an axisymmetric body and, secondly, to the problem of determining the heat transfer to an axisymmetric stagnation point. On the basis of an analysis of the results of a numerical solution of the problem it is shown that corresponding analogs can also be used for the friction stress. The accuracy of the similarity relations established is estimated by solving the problem by a finite-difference method. A similarity relation of the same kind was previously obtained in [1] for a double-curvature stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 117–122, January–February, 1990.     

Existence and nonuniqueness of local separation zones in viscous jets

The plane steady problem of the flow of a viscous wall jet past a smoothed break in the contour of a body is considered. For convenience, the flow in the neighborhood of the junction between two flat plates inclined at an angle to each other is chosen for study. As a result of the small extent of the region investigated the flow field is divided into two layers: the main part of the jet, which undergoes inviscid rotation, and a thin sublayer at the wall, which ensures the satisfaction of the no-slip condition. Particular interest attaches to the flow regime in which the solution in the sublayer satisfies the Prandtl boundary layer equations with a given pressure gradient. A similar problem was studied in [1–4]. The present case is distinguished by the structure of the free interaction region in a small neighborhood of the point of zero surface friction stress. By means of the method of matched asymptotic expansions, applied to the analysis of the Navier-Stokes equations, it is established that the interaction mechanism is that described in [5–7]. As a result, an integrodifferential equation describing the behavior of the surface friction stress function is obtained. A numerical solution of this equation is presented. The range of plate angles on which solutions of the equation obtained exist and, therefore, flows of this general type are realized is determined. The essential nonuniqueness of the possible solutions is established, and in particular attention is drawn to the possible existence of six permissible friction distributions.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 38–45, January–February, 1986.The author wishes to thank V. V. Sychev and A. I. Ruban for their useful advice and discussion of the results.     

Axisymmetric analogy for three-dimensional viscous flow problems

A method of solving three-dimensional flow problems with the aid of two-dimensional solutions, which can be used for any Reynolds numbers, is proposed. The method is based on the use of similarity relations obtained in the theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer. These relations express the heat flux and the friction stress on the lateral surface of a three-dimensional body in terms of the values on the surface of an axisymmetric body. The accuracy is estimated by comparing the results with those of a numerical finite-difference calculation of the flow past bodies of various shapes. Similar similarity relations were previously obtained in [1] for the plane of symmetry of a blunt body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 111–118, November–December, 1991.The authors are grateful to G. A. Tirskii for his interest in their work.     

Numerical simulation of laminar viscous supersonic flow past a two-dimensional cavity

A systematic study of laminar viscous supersonic flows past rectangular cavities in a flat plate was carried out on the basis of the numerical integration of the Navier-Stokes equations. The greater part of calculations was performed at a Mach number of the outer flow equal to 3 and at a surface temperature amounting to 20% of the stagnation temperature. The pressure, surface friction and heat flux profiles on the plate and on the cavity walls and bottom, together with the streamline pattern, were obtained for various Reynolds numbers.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 6, pp. 27–33, November–December, 1994.     

Investigation of laminar sublayer on permeable surfaces with injection

The thin-wall region — the laminar (or viscous) sublayer, in which the molecular mechanism of transfer predominates — plays an important role in friction and heat-transfer processes in a turbulent boundary layer. In particular, the relation between the sublayer thickness and the height of the surface roughness determines the nature of the flow — hydrodynamically smooth or rough — over the surface. This is of great practical importance and, hence, the roughness criterion has become the subject of numerous and systematic investigations. There are exhaustive data for the majority of the commonest cases encountered in practice [1]. The velocity on the boundary of the laminar sublayer appears as an important parameter in two-layer calculation schemes (e.g., [2–4], etc.). Although the theoretical analysis of a turbulent boundary layer with injection started several decades ago, there are at present hardly any reliable experimental data which can be used to determine the variation of the parameters within and at the boundary of the sublayer in relation to the injection rate. In this work we used interferometric diagnostics for precision experimental investigations of the parameters of the laminar sublayer on permeable surfaces with injection.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 66–72, September–October, 1977.     

Investigation of the hypersonic viscous shock layer around blunt bodies in a nonuniform flow

Unseparated viscous gas flow past a body is numerically investigated within the framework of the theory of a thin viscous shock layer [13–15]. The equations of the hypersonic viscous shock layer with generalized Rankine-Hugoniot conditions at the shock wave are solved by a finite-difference method [16] over a broad interval of Reynolds numbers and values of the temperature factor and nonuniformity parameters. Calculation results characterizing the effect of free-stream nonuniformity on the velocity and temperature profiles across the shock layer, the friction and heat transfer coefficients and the shock wave standoff distance are presented. The unseparated flow conditions are investigated and the critical values of the nonuniformity parameter a_k [10] at which reverse-circulatory zones develop on the front of the body are obtained as a function of the Reynolds number. The calculations are compared with the asymptotic solutions [10, 12].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 154–159, May–June, 1987.     

Flow past a three-dimensional hump in the hypersonic boundary layer on a cooled body

Hypersonic gas flow past a small hump on the surface of a cold body has been investigated. The main parameters controlling the physical features of the flow in the near-wall viscous layer are determined. The solution of the boundary-value problem on a viscous sublayer along the symmetry line of flow past a wedge of finite span has been investigated numerically and the influence of the similarity parameters demonstrated.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.1, pp. 157–165, January–February, 1993.     

Heat transfer in the neighborhood of a point of inflection in the leading edge of a plate in hypersonic flight

A study is made of the three-dimensional flow of a viscous gas around a flat plate with an inflection in the generator of the leading edge in the case of strong interaction between the exterior hypersonic flow and the boundary layer. Numerical solutions to the problem are obtained. It is shown that near points of inflection of the profile of the leading edge of a flat wing strong self-induced secondary flows can be formed together with associated local peaks of the heat fluxes and the friction.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 40–45, May–June, 1980.     

Flow of a viscous heat-conducting gas and binary mixtures in a sink

The class of exact solutions of the one-dimensional Navier-Stokes equations corresponding to gas flows from a spherical source or sink has been investigated analytically and numerically on a number of occasions (see, for example, [1, 2]). Here, the solution for a sink is considered in the presence of heat transfer from the ambient medium. Apart from seeking the solution itself, the object of the investigation was to establish the conditions of transi tion from viscous to inviscid flow in the sink as the Reynolds number tends to infinity. As shown in [3], for zero heat flux at an infinitely remote point there is no such transition for flow in a sink. The sink flow characteristics of a binary gas mixture are investigated in detail. In the transonic flow region an asymptotic solution is obtained.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 56–62, January–February, 1989.     

Three-dimensional thin viscous shock layer in the absence of planes of symmetry in the flow

The basic laws of viscous homogeneous gas flow at high supersonic speeds past smooth blunt bodies with a permeable surface are investigated within the framework of the thin viscous shock layer model. An efficient numerical method of solving these equations, which makes it possible to consider cases of flow past bodies at angles of attack and slip, when there are no planes of symmetry in the flow, is proposed. Some results of calculating the flow past a triaxial ellipsoid with an axial ratio of 103n73 at angles of attack =0–45° and slip angles =0–45° over a broad interval of Reynolds numbers are presented as an example. The effect of the principal determining parameters of the problem on the flow structure in the shock layer and the surface friction and heat transfer coefficients is analyzed. An expression for calculating the heat fluxes to the impermeable surface of smooth blunt bodies in a supersonic homogeneous viscous gas flow over a broad interval of Reynolds numbers is proposed on the basis of the solutions obtained and the results of other authors.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 150–158, March–April, 1989.     

Laminar boundary layer in a swirling flow on a permeable surface

Numerical and approximate analytic methods are used to investigate the three-dimensional nonself-similar swirling flow of a uniform gas on an axisymmetric permeable surface. For large values of the injection parameter (in the general case the injection velocity vector forms a nonzero angle with the vector of the outward normal to the flow surface) asymptotic expressions are obtained for the velocity and temperature profiles across the injection layer, the components of the friction stress and the heat flux at the surface. Certain results of a numerical solution of the problem obtained on a broad interval of variation of the injection parameter are presented. By comparing the numerical and asymptotic solutions the accuracy and region of applicability of the latter are estimated.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 28–37, November–December, 1985.In conclusion, the author wishes to thank É. A. Gershbein (deceased) for useful discussion of his results.     

The effect of variable viscosity on the entropy generation and pumping power in a laminar fluid flow through a duct subjected to constant heat flux

Entropy generation and pumping power required for a laminar viscous flow in a duct subjected to constant heat flux has been investigated. The temperature dependence of the viscosity is taken into consideration. The ratio of pumping power to total heat flux decreases considerably and entropy generation increases along the duct length for viscous fluids. Therefore, it is shown that an optimum duct length may be obtained which minimizes total energy losses due to both entropy generation and pumping power. For low heat-flux conditions, entropy generation due to viscous friction becomes dominant and the dependence of viscosity on temperature must be considered in order to determine entropy generation accurately. Received on 17 May 1999     

Interaction of an elastic boundary with a viscous sublayer of a turbulent boundary layer

The boundary region of a turbulent boundary layer contributes greatly to the drag. Intense turbulence is generated in this region. Below we investigate the interaction of an elastic boundary with a viscous sublayer for a decrease in the Reynolds stresses, and for a corresponding decrease in the drag. It does not seem possible to investigate the general case. Therefore, the problem is solved within the framework of the limitations made by Sternberg [1] for the theory of a viscous sublayer in a turbulent flow near a solid smooth wall.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 3, pp. 58–62, May–June, 1971.The authors thanks G. S. Migirenko for advice and remarks given during a discussion of the work.     

Boundary layer in the vicinity of the stagnation point of a body of axial symmetry in a turbulent stream

The flow in the boundary layer in the vicinity of the stagnation point of a flat plate is examined. The outer stream consists of turbulent flow of the jet type, directed normally to the plate. Assumptions concerning the connection between the pulsations in velocity and temperature in the boundary layer and the average parameters chosen on the basis of experimental data made it possible to obtain an isomorphic solution of the boundary layer equations. Equations are obtained for the friction and heat transfer at the wall in the region of gradient flow taking into account the effect of the turbulence of the impinging stream. It is shown that the friction at the wall is insensitive to the turbulence of the impinging stream, while the heat transfer is significantly increased with an increase in the pulsations of the outer flow. These properties are confirmed by the results of experimental studies [1–4].Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 5, pp. 83–87, September–October, 1973.     

Unsteady three-dimensional viscous shock layer in nonuniform gas flow in the neighborhood of a stagnation point

The combined influence of unsteady effects and free-stream nonuniformity on the variation of the flow structure near the stagnation line and the mechanical and thermal surface loads is investigated within the framework of the thin viscous shock layer model with reference to the example of the motion of blunt bodies at constant velocity through a plane temperature inhomogeneity. The dependence of the friction and heat transfer coefficients on the Reynolds number, the shape of the body and the parameters of the temperature inhomogeneity is analyzed. A number of properties of the flow are established on the basis of numerical solutions obtained over a broad range of variation of the governing parameters. By comparing the solutions obtained in the exact formulation with the calculations made in the quasisteady approximation the region of applicability of the latter is determined. In a number of cases of the motion of a body at supersonic speed in nonuniform media it is necessary to take into account the effect of the nonstationarity of the problem on the flow parameters. In particular, as the results of experiments [1] show, at Strouhal numbers of the order of unity the unsteady effects are important in the problem of the motion of a body through a temperature inhomogeneity. In a number of studies the nonstationary effect associated with supersonic motion in nonuniform media has already been investigated theoretically. In [2] the Euler equations were used, while in [3–5] the equations of a viscous shock layer were used; moreover, whereas in [3–4] the solution was limited to the neighborhood of the stagnation line, in [5] it was obtained for the entire forward surface of a sphere. The effect of free-stream nonuniformity on the structure of the viscous shock layer in steady flow past axisymmetric bodies was studied in [6, 7] and for certain particular cases of three-dimensional flow in [8–11].Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 3, pp. 175–180, May–June, 1990.     

Asymptotic solution of the Navier-Stokes equations for a compressible-fluid flow in a plane channel under intensive blowing from the walls

The problem of determining the friction, heat flux, line of spreading, and longitudinal pressure gradient in the neighborhood of the central streamline is considered for the flow of a homogeneous, weightless, compressible fluid in a plane channel under intensive blowing from the walls. The asymptotic formulas obtained are compared with the results of numerical computations, and the limit of their applicability is established.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 76–82, November–December, 1971.In conclusion, the author is grateful to G. A. Tirskii for valuable comments and interest in the research.     

Influence of real gas properties on the integral aerodynamic coefficients

The results of mathematically modeling axisymmetric hypersonic flow past an ellipsoid are presented. The calculation data are obtained on the basis of a numerical solution of the complete Navier—Stokes equations using a finite-difference method. The investigation is carried out for the problem of laminar flow over the windward side of the body. The effect of the elongation of the ellipsoid on the total heat flux and the viscous and pressure drag is considered. Results are obtained for three different gas (air) models: the perfect gas, chemical equilibrium and chemical nonequilibrium models. For the latter model various sets of catalyticity coefficients are considered. The effect of the real properties of air on the integral aerodynamic characteristics of ellipsoids with different elongations is analyzed.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 156–164, July–August, 1992.