Nitro musk metabolites bound to carp hemoglobin: determination by GC with two MS detection modes: EIMS versus electron capture negative ion MS

Nitroaromatic compounds including synthetic nitro musks are important raw materials and intermediates in the synthesis of explosives, dyes, pesticides, and pharmaceutical and personal-care products (PPCPs). The nitro musks such as musk xylene (MX) and musk ketone (MK) are extensively used as fragrance ingredients in PPCPs and other commercial toiletries. Identification and quantification of a bound 4-amino-MX (4-AMX) metabolite as well as a 2-amino-MK (2-AMK) metabolite were carried out by gas chromatography–mass spectrometry (GCMS), with selected ion monitoring (SIM) in both the electron ionization (EIMS) and electron capture (EC) negative ion chemical ionization (NICIMS) modes. Detection of 4-AMX and 2-AMK occurred after the cysteine adducts in carp hemoglobin, derived from the nitroso metabolites, were released by alkaline hydrolysis. The released metabolites were extracted into n-hexane. The extract was preconcentrated by evaporation, and analyzed by GC-SIM-MS. A comparison between the EI and EC approaches was made. EC NICIMS detected both metabolites whereas only 4-AMX was detected by EIMS. The EC NICIMS approach exhibited fewer matrix responses and provided a lower detection limit. Quantitation in both approaches was based on an internal standard and a calibration plot.     

Determination of synthetic musk compounds in indoor house dust by gas chromatography–ion trap mass spectrometry

A new method for the simultaneous determination of 11 synthetic musks and one fragrance compound in house dust was developed. The nitro musks included musk ketone (MK, 4-tert-butyl-3,5-dinitro-2,6-dimethylacetophenone), musk xylene (MX, 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene), musk ambrette (1-tert-butyl-2-methoxy-4-methyl-3,5-dinitrobenzene) and musk moskene (1,1,3,3,5-pentamethyl-4,6-dinitroindane). The polycyclic musk compounds were 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-(γ)-2-benzopyran (HHCB), 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN), 4-acetyl-1,1-dimethyl-6-tert-butylindane, 6-acetyl-1,1,2,3,3,5-hexamethylindane, 5-acetyl-1,1,2,6-tetramethyl-3-isopropylindane, 6,7-dihydro-1,1,2,3,3-pentamethyl-4(5H)-indanon. The one macrocyclic musk was 1,4-dioxacycloheptadecane-5,17-dione. The bicyclic hydrocarbon fragrance compound (1,2,3,4,5,6,7,8-octahydro-2,3,8,8-tetramethylnaphthalen-2yl)ethan-1-one (OTNE) and HHCB-lactone (4,6,6,7,8,8-hexamethyl-1H,3H,4H,6H,7H, 8H-indeno[5,6-c]pyran-1-one), a degradation product of HHCB, were also analysed. NIST SRM 2781 (domestic sludge) and SRM 2585 (organic contaminants in house dust) were analysed for these target compounds. The method was applied for the analysis of 49 paired samples collected using two vacuum sampling methods: a sample of fresh or "active" dust (FD) collected using a Pullman-Holt vacuum sampler, and a household dust (HD) sample taken from the participants' vacuum cleaners. Method detection limits and recoveries ranged from 12 to 48?ng/g and 54 to 117?%, respectively. AHTN, HHCB, OTNE and HHCB-lactone were detected in all samples, with median concentrations of 552, 676, 252 and 453?ng/g for FD samples, respectively; and 405, 992, 212 and 492?ng/g for HD samples, respectively. MX and MK were detected with high frequencies but with much lower concentrations. The two sampling methods produced comparable results for the target analytes. Widely scattered concentration levels were observed for target analytes from this set of 49 house dust samples, suggesting a wide variability in Canadian household exposure to synthetic musks.     

分散固相萃取-气相色谱-质谱联用法测定水产品中的痕量酮麝香

建立了水产品中痕量酮麝香测定的分散固相萃取-气相色谱-质谱联用法(GC-MS)。目标化合物经1%乙酸-乙腈高速匀浆提取,以N-丙基乙二胺(PSA)、C₁₈和石墨化碳(GCB)混合物为分散剂对其进行净化,采用GC-MS在选择离子监测模式下测定,外标法定量,并应用正交试验对前处理条件进行优化,以及对酮麝香的裂解机制进行探讨。在优化条件下,方法在1～50 μg/L范围内线性关系良好,相关系数不低于0.999,检出限(S/N=3)为0.30 μg/kg。对于明虾和罗非鱼空白样品,在1.0、2.0、10.0 μg/kg 3个水平下的加标回收率为91.8%～110.6%,相对标准偏差(RSD)为2.6%～8.4%。该方法操作简便、快速、准确,可用于水产品中痕量酮麝香的日常检验。     

Determination of synthetic musks in the sediment of the Taihu lake by using accelerated solvent extraction (ASE) and GC/MS

Synthetic musks, substitutes for natural musks, are widely distributed in environment. They have been detected in water, sludge, fish, shrimp, mussels and other aquatic animals, and even in human's adipose tissue, blood and breast milk. In this study, a new extraction procedure, based on the accelerated solvent extraction (ASE) and in cell clean-up technique was developed and successfully coupled with gas chromatography-mass spectrometry (GC/MS) for the analysis of musks in sediment samples. With this method, the limits of detection as low as 0.03–0.05?ng?g^?1 and the recovery rate of 86.0%–104% are achieved. When compared with soxhlet extraction (SE) and ultrasonic extraction (USE), ASE not only has the best extraction efficiency but also has advantage in extraction time and solvent consumption. Eight synthetic musks, including six polycyclic musks (Tonalide (AHTN), Galaxolide (HHCB), Phantolide (AHDI), Traseolide (ATII), Cashmeran (DPMI) and Celestolide (ADBI)) and two nitro musks (musk xylene (MX) and musk ketone (MK)), were evaluated in sediment samples collected from 15 selected locations of the Taihu lake, one of the largest freshwater lakes in China. The contents of synthetic musks in sediment samples range from 0.336 to 3.10?ng?g^?1 for HHCB, 0.184 to 1.21?ng?g^?1 for AHTN, below detection limit (BDL) to 0.349?ng?g^?1 for MX, and BDL to 0.0786?ng?g^?1 for MK. The contents of DPMI, ADBI, AHMI and ATII are below detection limit in all samples. The results reflect current status of fragrance compound pollution in this area, and provide basic data for environmental policy making.     

多重吸附同步净化-气相色谱-质谱联用法测定水产品中痕量的二甲苯麝香和酮麝香

为了考察水产品中二甲苯麝香和酮麝香的残留量,建立了水产品中痕量二甲苯麝香和酮麝香测定的多重吸附同步净化（MASP）-气相色谱-质谱联用法（GC-MS）。以乙腈高速匀浆提取样品,应用MASP方法对样品同时进行提取、盐析和净化,并采用GC-MS在选择离子监测（SIM）模式下测定水产品中的痕量二甲苯麝香和酮麝香,以基质匹配标准溶液外标法定量。选用DB-5 MS石英毛细管柱（30 m×0.25 mm×0.25 μm）,采用电子轰击电离源,二甲苯麝香的选择监测离子为m/z 282、297、265,酮麝香为m/z 279、294、191。结果表明：在优化条件下,二甲苯麝香和酮麝香在1~100 μg/kg范围内线性良好,相关系数不低于0.999,检出限（S/N=3）为0.30 μg/kg。明虾、花蛤和鳗鱼空白样品中1.0、2.0、10.0 μg/kg 3个添加水平下二甲苯麝香和酮麝香的加标回收率为79%~104%,相对标准偏差（RSD）为1.6%~13.3%。本方法具有操作简便、快速、准确的特点,可用于水产品中痕量二甲苯麝香和酮麝香的日常检测。     

A Microwave‐assisted Headspace Solid‐phase Microextraction for Rapid Determination of Synthetic Polycyclic and Nitro‐aromatic Musks in Fish Samples

Rapid solvent‐free microwave‐assisted headspace solid‐phase microextraction (MA‐HS‐SPME) coupled with gas chromatography‐mass spectrometry (GC‐MS) was developed to determine synthetic polycyclic and nitro‐aromatic musks in fish samples. Four commonly used synthetic musks, galaxolide (HHCB), tonalide (AHTN), musk xylene (MX) and musk ketone (MK) were employed in the method development and validation. The parameters (microwave irradiation time, irradiation power, amount of water addition, pH value and addition of NaCl) affecting the extraction efficiency of analytes from fish slurry were systematically investigated and optimized. The best extraction conditions were achieved when the fish sample 2‐g mixed with 4‐mL methanol and 15‐mL deionized water (containing 4 g of NaCl, pH 2.0 in a 40‐mL sample‐vial) was microwave irradiated at 80 watt for 5 min. The limits of quantification (LOQ) were 0.4 to 1.2 ng/g in 2‐g of wet tissue. The precision for these analytes, as indicated by relative standard deviations, were less than 9% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 80 to 92%. A standard addition method was used to quantitate these four synthetic musks, and the total concentrations ranged from 2.1 to 23.1 ng/g in various fish samples.     

Synthetic musk fragrances in environmental Standard Reference Materials

Synthetic musk fragrances have been measured in water, air, sediments, sewage sludge, and biota worldwide. As the study of the environmental fate and impacts of these compounds progresses, the need for Standard Reference Materials (SRMs) for these compounds to facilitate analytical method improvement and interlaboratory comparisons becomes increasingly important. The National Institute of Standards and Technology (NIST) issues environmental matrix SRMs with certified concentrations for a variety of persistent organic pollutants including polycyclic aromatic hydrocarbons (PAHs), chlorinated pesticides, and polychlorinated biphenyl congeners (PCBs). Until now synthetic musk fragrance concentrations have not been reported in NIST SRMs. The objective of this study was to provide reference values for several commonly detected synthetic musk fragrances in several NIST natural matrix SRMs. In this study five polycyclic musk fragrances [HHCB (1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-γ-2-benzopyran), AHTN (7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene), ADBI (4-acetyl-1,1-dimethyl-6-tert-butylindane), AHMI (6-acetyl-1,1,2,3,3,5-hexamethylindane), and ATII (5-acetyl-1,1,2,6-tetramethyl-3-isopropylindane] and two nitro musk fragrances [musk xylene (1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene) and musk ketone (4-tert-butyl-3,5-dinitro-2,6-dimethylacetophenone)] were measured in selected environmental SRMs. Gas chromatography–electron impact mass spectrometry (GC/EI-MS) was used for all analyses. HHCB was the most frequently detected synthetic musk fragrance and was detected in SRM 2585 Organic Contaminants in House Dust, SRM 2781 Domestic Sludge, SRM 1974b Organics in Mussel Tissue (Mytilus edulis), and SRM 1947 Lake Michigan Fish Tissue. It was not detected in SRM 1946 Lake Superior Fish Tissue or SRM 1945 Organics in Whale Blubber. Concentrations of HHCB in these SRMs ranged from 1.12 ng/g in SRM 1947 to 92,901 ng/g in SRM 2781. All of the polycyclic musk fragrances were detected in SRM 2781 and all of the target compounds were detected in SRM 2585. Electronic supplementary material Supplementary material is available for this article at and is accessible to authorized users.     

Determination of coumarin in fragrance products by capillary gas chromatography with electron capture detection.

A gas chromatographic (GC) method is described for the determination of coumarin in fragrance products. Coumarin was tentatively identified by retention time and confirmed by GC/mass spectrometry. The amount of coumarin was determined by external standard. The method was validated by conducting recovery studies from fortified fragrance products at several concentrations. Recoveries of coumarin ranged from 99 to 110%, with a relative standard deviation of 3.24. The method was used to survey a variety of fragrance products purchased in the metropolitan Washington, DC area, for coumarin. Seventy one percent of the products were found to contain coumarin at concentrations ranging from 0.002 to 0.61%.     

Optimization of solid-phase microextraction for the gas chromatographic-mass spectrometric determination of synthetic musk fragrances in water samples

Described is a solid-phase microextraction-gas chromatography-mass spectrometric procedure for the determination of three polycyclic musk fragrances (galaxolide, tonalide, celestolide) and a nitro musk fragrance (musk ketone) in natural river water. Both classes of the musk fragrances could be extracted reproducibly from water samples with a recovery in the range of 45-50% and relative standard deviation of 11-18% for fragrances at 25-260 ng/l levels. Detection limits were between 14 and 22 ng/l. To achieve this reproducibility it was necessary to use an internal standard, pentachloronitrobenzene, for all substances. Best recoveries were achieved with polydimethylsiloxane (PDMS)-divinylbenzene fibers (compared to recoveries obtained with PDMS, polyacrylate or carboxen fibers) and extraction times of 45 min at 30 degrees C, with no need for attainment of equilibrium conditions. The latter was achieved at about 2 h. For Elbe River water, in the vicinity of Magdeburg, no matrix effects were observed. While the average levels of celestolide and musk ketone for samples investigated were below the detection limits, 14 and 22 ng/l, respectively, and for tonalide below the limit of quantification, 22 ng/l, the ambient levels of galaxolide in the Elbe River were 117 ng/l.     

Preparation and characterization of inclusion complexes containing fixolide, a synthetic musk fragrance and cyclodextrins

AHTN (7-Acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene), commercially known as fixolide or tonalide, is a synthetic fragrance widely used in replace of natural musk odor which is more expensive. It is a popular fragrance material added in the manufacturing of personal care and household products, such as perfumes, soaps, shampoos, detergents, and fabric softeners. AHTN is semivolatile and is degraded under light exposure and high temperature. This work focuses on the complexation of AHTN with cyclodextrins in the effort to stabilize the fragrance material. AHTN was complexed with β-cyclodextrin, methyl (MβCD), and hydroxypropyl (HPβCD) derivatives in the mole ratio 1:1, 1:2, and 1:3 guest:host, and the complexes formed by physical mixing, co-precipitation, kneading, and freeze-drying were analyzed by DSC and FTIR. Percent AHTN included in the complex was also determined by hexane extraction and GC analysis. It was found that no inclusion complex was formed in the physical mixture. When co-precipitation method was performed, only βCD could form inclusion complex with AHTN, while the other two derivatives could not. Using 1:2 AHTN:βCD, no free AHTN was left in the complex as evidenced by DSC and FTIR spectrum. In kneading and freeze-drying methods, complexes could be formed with all CDs tested. However, co-precipitation method with 1:2 AHTN:βCD and kneading method with 1:2 AHTN:MβCD provided the highest complex yield with highest amount of AHTN included in the complex. AHTN in the complex form was more stable against high temperature and UV exposure than its free form.     

人工合成麝香的分析方法及环境污染现状

人工合成麝香作为天然麝香的替代物被大量用于日化产品中,按其化学结构可分为硝基麝香、多环麝香和大环麝香3种。人工合成麝香的大量生产及广泛使用使之通过各种途径进入环境,而该物质亲脂性和持久性的特点,导致其在生物体内积累并产生毒理效应,故引起了广泛关注,成为一类新型污染物。该文综述了目前人工合成麝香的分类、环境污染现状及不同基体样品的分析检测方法,为今后合成麝香的风险评价研究提供参考。     

Headspace stir bar sorptive extraction followed by thermal desorption and gas chromatography with mass spectrometry to determine musk fragrances in sludge samples without sample pretreatment

A direct, simple and solvent‐free method based on headspace stir bar sorptive extraction and thermal desorption gas chromatography with mass spectroscopy was developed to determine 13 musk fragrances (six polycyclic musks, three nitro musks and four macrocyclic musks) in sludge without sample treatment. The optimal headspace stir bar sorptive extraction conditions were achieved when a polydimethylsiloxane stir bar was exposed for 45 min in the headspace of a 10 mL vial filled with 100 mg of sludge mixed with 0.2 mL of water stirred at 750 rpm at 80°C. The stir bar was then desorbed in the thermal desorption gas chromatography and mass spectrometry system, obtaining limits of detection between 5 and 30 ng/g. The method applicability was tested with sewage sludge from two urban wastewater treatment plants and from a potable water treatment plant. Results showed galaxolide and tonalide to be the most abundant musk fragrances found in wastewater treatment plants with maximal concentrations of 9240 and 7500 ng/g, respectively. Maximum concentration levels between 35 and 635 ng/g were found for musk ketone, musk moskene, traseolide, phantolide and celestolide in this kind of samples. Concentrations below the limits of quantitation of phantolide, galaxolide, tonalide and musk ketone were found in sludge from a potable water treatment plant.     

固相微萃取-气相色谱质谱法联用测定水体中痕量多环麝香类化合物

采用固相微萃取-气相色谱质谱法联用测定了水体中痕量多环麝香类化合物。对固相微萃取条件和解析条件进行了优化,确定了微萃取条件为:选用65μmPDMS-DVB萃取头、顶空萃取模式(HS),在800 r/min,60℃条件下,萃取45 min;萃取过程中保持pH 7并且不加入NaCl;解析条件为:解析时间为3 min,插入GC深度为4 cm,进样口温度为250℃。方法的检测限为0.29～0.37 ng/L,线性范围5～1000ng/L,相对标准偏差1.5%～2.2%。对实际污水厂不同类型的水样使用优化后的实验条件进行了验证试验,目标化合物的回收率在82.5%～92.8%之间,表明优化后的试验条件适用于实际水体中痕量多环麝香类化合物的分析测定。     

Determination of musk fragrances in sewage sludge by pressurized liquid extraction coupled to automated ionic liquid‐based headspace single‐drop microextraction followed by GC‐MS/MS

A method for the quantitative determination of ten musk fragrances extensively used in personal care products from sewage sludge was developed by using a pressurized liquid extraction (PLE) followed by an automated ionic liquid‐based headspace single‐drop microextraction and gas chromatography‐tandem mass spectrometry. The influence of main factors on the efficiency of PLE was studied. For all musks, the highest recovery values were achieved using 1 g of pretreated sewage sludge, H₂O/methanol (1:1) as an extraction solvent, a temperature of 80°C, a pressure of 1500 psi, an extraction time of 5 min, 2 cycles, a 100% flush volume, a purge time of 120 s, and 1 g Florisil as in‐cell clean‐up extraction sorbent. The use and optimization of an in‐cell clean‐up sorbent was necessary to remove fatty interferents of the PLE extract that make the subsequent ionic liquid‐based headspace single‐drop microextraction difficult. Validation parameters, namely LODs and LOQs, ranged from 0.5–1.5 to 2.5–5 ng/g, respectively. Good levels of intra‐ and interday repeatabilities were obtained analyzing sewage sludge samples spiked at 10 ng/g (n = 3, RSDs < 10%). The method applicability was tested with sewage sludge from different wastewater treatment plants. The analysis revealed the presence of all the polycyclic musks studied at concentrations higher than the LOQs, ranging from 6 to 530 ng/g. However, the nitro musk concentrations were below the LOQs or, in the case of musk xylene, was not detected.     

Microextraction by packed sorbents combined with surface-enhanced Raman spectroscopy for determination of musk ketone in river water

Microextraction by packed sorbents (MEPS) combined with Surface-enhanced Raman spectroscopy (SERS) was investigated, and applied to the determination of musk ketone (MK) in river water samples. The full MEPS–SERS method includes analyte enrichment by MEPS preconcentration with C₁₈ sorbent followed by SERS detection supported by silver nanoparticles. An eluent drop containing the analyte is deposited directly from the MEPS syringe on a CaF₂ glass plate. When the drop has dried, a specific volume of silver nanoparticles solution is added on it before each SERS measurement. Several experimental variables were studied in depth; under the optimum experimental conditions MK can be extracted from a 500 μL sample with recoveries in the range 47–63 %. The limit of detection was 0.02 mg L^?1 and the relative standard deviation 15.2 % (n?=?4). Although not investigated in this work, the proposed method might be suitable for in-situ monitoring, because of the portability of the Raman spectrometer used.

New analytical method for the determination of musks in personal care products by Quick,Easy, Cheap,Effective, Rugged,and Safe extraction followed by GC–MS

Synthetic musks are organic compounds used as fragrance additives and fixative compounds in a diversity of personal care products. A new method based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction followed by GC–MS for the analysis of 12 musks in personal care products was developed and validated. Some experimental parameters, such as total QuEChERS mass, sample mass/solvent volume ratio, type of extraction solvent, as well as salts and sorbents amount were investigated and optimized. The final method involves the musks extraction using acetonitrile, followed by the addition of anhydrous magnesium sulphate and sodium acetate. The clean‐up step was performed using dispersive SPE with primary and secondary amine and octadecyl–silica sorbents. This extraction procedure is fast (about 10 min) when compared to other traditional approaches. The method was robust for the matrices studied and shows a high precision (%RSD < 15%) and accuracy (average recovery of 85%), allowing the detection of musks in minimum concentrations between 0.01 ng/g (galaxolide) and 15.80 ng/g (musk xylene). The developed method was applied to the analysis of 12 samples, which revealed musks concentrations ranging from 2 ng/g (toothpaste) to 882 340 ng/g (perfumed body lotion).     

Closed-loop stripping analysis of synthetic musk compounds from fish tissues with measurement by gas chromatography-mass spectrometry with selected-ion monitoring

Synthetic musk compounds have been found in surface water, fish tissues, and human breast milk. Current techniques for separating these compounds from fish tissues require tedious sample clean-up procedures. A simple method for the determination of synthetic musk compounds in fish tissues has been developed. Closed-loop stripping of saponified fish tissues in a 1-1 Wheaton purge-and-trap vessel is used to strip compounds with high vapor pressures such as synthetic musks from the matrix onto a solid sorbent (Abselut Nexus). This technique is useful for screening biological tissues that contain lipids for musk compounds. Analytes are desorbed from the sorbent trap sequentially with polar and nonpolar solvents, concentrated, and directly analyzed by high resolution gas chromatography coupled to a mass spectrometer operating in the selected ion monitoring mode. In this paper, we analyzed two homogenized samples of whole fish tissues with spiked synthetic musk compounds using closed-loop stripping analysis and pressurized liquid extraction (PLE). The analytes were not recovered quantitatively but the extraction yield was sufficiently reproducible for at least semi-quantitative purposes (screening). The method was less expensive to implement and required significantly less sample preparation than the PLE technique.     

Dispersive Micro Solid‐phase Extraction Coupled with Ultrasound‐assisted Solvent Desorption for Determination of Synthetic Polycyclic and Nitro‐aromatic Musks in Aqueous Samples

An optimized method for the determination of five synthetic polycyclic: celestolide (ADBI), phantolide (AHMI), traseolide (ATII), galaxolide (HHCB), tonalide (AHTN), and two nitro‐aromatic musks: musk xylene (MX) and musk ketone (MK), in water samples is described. The method involves a dispersive micro solid‐phase extraction (D‐μ‐SPE) plus ultrasound‐assisted solvent desorption (UASD) prior to their determination by gas chromatography‐mass spectrometry (GC‐MS) using the selected ion storage (SIS) mode. Factors affecting the extraction efficiency of the target analytes from water samples and ultrasound‐assisted solvent desorption were optimized by a Box‐Behnken design method. The optimal extraction conditions involved immersing 10.1 mg of a typical octadecyl (C18) bonded silica adsorbent (i.e., ENVI‐18) in a 50 mL water sample. After 10.4 min of extraction by vigorously shaking, the adsorbent was collected and dried on a filter, and the target musks were desorbed by ultrasound‐assisted for 38 sec with n‐hexane (200 μL) as the desorption solvent. A 10 μL aliquot was then directly determined by large‐volume injection GC‐MS. The limits of quantitation (LOQs) were 1.2 to 5 ng/L. The precision for these analytes, as indicated by relative standard deviations (RSDs), were less than 11% for both intra‐ and inter‐day analysis. Accuracy, expressed as the mean extraction recovery, was between 74% and 92%. A preliminary analysis of the effluents from municipal wastewater treatment plants (MWTP) and river water samples revealed that HHCB and AHTN were the two most commonly detected synthetic musks; their concentration were determined to range from 88 to 690 ng/L for effluent samples, and 5 to 320 ng/L for river water samples. This is a simple, low cost, effective, and eco‐friendly analytical method.     

固相萃取-气相色谱-质谱法测定进口海产品中11种合成麝香

建立了固相萃取-气相色谱-质谱法同时测定进口海产品中11种合成麝香（开司米木、萨利麝香、粉檀麝香、葵子麝香、特斯拉、佳乐麝香、二甲苯麝香、吐纳麝香、伞花麝香、西藏麝香和麝香酮）。样品经正己烷提取,弗罗里硅土固相萃取柱净化,内标法定量。目标物在0.001~0.1 mg/L内呈良好的线性相关,相关系数（r²）均大于0.990,方法检出限（信噪比（S/N）>3）为0.35~2.08μg/kg,定量限（S/N>10）为1.18~5.00μg/kg。分别在空白基质中添加低、中、高3个水平的标准品进行回收试验,平均回收率为83.1%~117%,相对标准偏差（RSD,n=6）为5.1%~8.5%。利用该方法对2017年上海口岸进口的30个海产品进行了筛查,发现佳乐麝香在93.3%的被测样品中均有检出,含量最高达3.82μg/kg。葵子麝香和伞花麝香也是检出较多的麝香品种,含量最高分别可达15.4μg/kg和10.5μg/kg。该方法特异性强,灵敏度高,适用于海产品中多种合成麝香残留物的筛查和确证。     

Optimisation of a solid-phase microextraction method for synthetic musk compounds in water

A solid-phase microextraction method (SPME) for determining trace levels of synthetic musk fragrances in residual waters has been developed. Six polycyclic musks (cashmeran, phantolide, celestolide, traseolide, galaxolide and tonalide), and a macrocyclic musk (ambrettolide) have been analysed. A detailed study of the different parameters affecting the extraction process is presented. The main important factors affecting the microextraction process have been studied and optimised by means of a categorical factorial design. Two extraction modes (direct SPME and headspace SPME) were tried at different extraction temperatures using four different fiber coatings [polydimethylsiloxane (PDMS), Carboxen (CAR)-PDMS, PDMS-divinylbenzene (DVB) and Carbowax (CW)-DVB]. An extraction temperature of 100 degrees C sampling the headspace over the sample using CAR-PDMS or PDMS-DVB as fiber coatings were found to be the experimental conditions that lead to a more effective extraction. The method proposed is very simple and yields high sensitivity, with detection limits in the low pg/ml, good linearity and repeatability for all the target compounds. The total analysis time, including extraction and GC analysis, was only 45 min. The optimised method performed well when it was applied to waste water from an urban treatment plant.