Electro-optomechanical cooperative cooling of nanomechanical oscillator beyond resolved sideband regime

We propose a ground-state cooling scheme for a nanomechanical oscillator(NMO)that interacts with an optical cavity via radiation pressure at one side and with a superconducting microwave cavity via a capacitor at the other side.By driving these two cavities on their respective red sidebands with extra laser and microwave fields,the NMO’s dual cooling channel is created through electro-optomechanical cooperation.Differing from the conventional optomechanical system with a single optical cavity wherein ground-state cooling is limited in the resolved sideband,the proposed scheme allows the optical cavity to function in an unresolved sideband regime under the cooperation of a microwave cavity with a high quality factor,or vice versa.In a weak coupling regime we demonstrate that the NMO can be cooled to near its ground-state from a finite temperature with a cooling rate that is significantly faster than that of the single-cavity optomechanical system.The heating process can be completely suppressed by the cooperation of the dual cooling channel by appropriately selecting the system’s parameters.With a decreasing thermal phonon number,the numerical results of final mechanical occupancy gradually approach the analytical cooling limit.     

Study of nanoscratching of polymers by using molecular dynamics simulations

Molecular dynamic simulations are performed to study the nanoscratching behavior of polymers.The effects of scratching depth,scratching velocity and indenter/polymer interaction strength are investigated.It is found that polymer material in the scratching zone around the indenter can be removed in a ductile manner as the local temperature in the scratching zone exceeds glass transition temperature Tg.The recovery of polymer can be more significant when the temperature approaches or exceeds Tg.The tangential force,normal force and friction coefficient increase as the scratching depth increases.A larger scratching velocity leads to more material deformation and higher pile-up.The tangential force and normal force are larger for a larger scratching velocity whereas the friction coefficient is almost independent of the scratching velocities studied.It is also found that stronger indenter/polymer interaction strength results in a larger tangential force and friction coefficient.     

Dynamic stability of parametrically-excited linear resonant beams under periodic axial force

The parametric dynamic stability of resonant beams with various parameters under periodic axial force is studied.It is assumed that the theoretical formulations are based on Euler-Bernoulli beam theory.The governing equations of motion are derived by using the Rayleigh-Ritz method and transformed into Mathieu equations,which are formed to determine the stability criterion and stability regions for parametricallyexcited linear resonant beams.An improved stability criterion is obtained using periodic Lyapunov functions.The boundary points on the stable regions are determined by using a small parameter perturbation method.Numerical results and discussion are presented to highlight the effects of beam length,axial force and damped coefficient on the stability criterion and stability regions.While some stability rules are easy to anticipate,we draw some conclusions:with the increase of damped coefficient,stable regions arise;with the decrease of beam length,the conditions of the damped coefficient arise instead.These conclusions can provide a reference for the robust design of parametricallyexcited linear resonant sensors.     

Research on Intracavity Laser Cooling of Solid

A theoretical study of intra-cavity laser cooling by anti-Stokes luminescence in a rare-earth doped glass is performed. Compared with cooling in an external cavity by multipassing the radiation, intra-cavity cooling has the advantage of high pumping power and high-absorbed power. However, one must ensure that the cavity can still form a laser by locating the material in the cavity. A model is developed to evaluate the enhancement factor and the absorbed power. The results show that for a low optical density, especially when the sample length is less than 2ram, the intracavity configuration is a very efficient method for laser cooling. The diode laser, which may become the best candidate for our model, is briefly discussed.     

Optomechanical force gradient sensing with levitated nanosphere pair

Guided by recent progress in ground state cooling and ultraweak force sensing in the optomechanical systems with optically levitated particles,we propose a novel quantum sensing protocol that can detect the gradient of a force field directly with extremely high sensitivity.The system consists of a pair of nanospheres levitated in the high vacuum environment with optical tweezers and an optical resonator.By positioning the two spheres suitably relative to the cavity,only the collective breathing mode of the sphere pair couples to the cavity field.This optomechanical coupling will transfer the information of force difference acting on the two sensors to cavity photons,which can then be detected directly at the output of the cavity.Given the optimal control of various technical noise sources,the sensitivity could reach 10^-15N m^-1/√HZ with a high spatial resolution of micron scale on a state-of-the-art experimental setup.The potential application of this protocol in searching for short range“new force”is analyzed.Compared with conventional searching protocols with a single levitated sphere,the method proposed here can increase the signal-to-noise ratio by more than one magnitude in a large searching parameter space.     

Controlling multiple optomechanically induced transparency in the distant cavity-optomechanical system

We theoretically investigate a two-cavity optomechanical system in which each optical cavity couples to a mechanical resonator via radiation pressure force,and the two optical cavities couple to each other via a distant waveguide.Our study shows that the multiple optomechanically induced transparency can be observed from the output field at the probe frequency.The number and width of the transparent windows can be tuned by the classical driving power Pl.We also analyze the distance of the two outermost transparency windows,which shows a linear relation with the parameters Pl andλ.Our approach is feasible for controlling multipartite induced transparency,which represents a valuable step towards quantum networks with photonic and phononic circuits.     

Lower Exciton Number Strong Light Matter Interaction in Plasmonic Tweezers

The plasmonic nanocavity is an excellent platform for the study of light matter interaction within a sub-diffraction volume under ambient conditions.We design a structure of plasmonic tweezers,which can trap molecular Jaggregates and also serve as a plasmonic cavity with which to investigate strong light matter interaction.The optical response of the cavity is calculated via finite-difference time-domain methods,and the optical force is evaluated based on the Maxwell stress tensor method.With the help of the coupled oscillator model and virtual exciton theory,we investigate the strong coupling progress at the lower level of excitons,finding that a Rabi splitting of 230 meV can be obtained in a single exciton system.We further analyze the relationship between optical force and model volume in the coupling system.The proposed method offers a way to locate molecular J-aggregates in plasmonic tweezers for investigating optical force performance and strong light matter interaction.     

Impacts of operational parameters on nonlinear polarization rotation-based passively mode-locked fiber laser

The operational parameters including the polarization controlling and the pump power in a nonlinear polarization rotation-based passively mode-locked fiber laser are studied in this paper.The carrier rate equations of the activated erbium-doped fiber are first employed together with the nonlinear Shro¨dinger equations to reveal the relation between the operational parameters and the output state of the passively mode-locked fiber laser.The numerical and experimental results demonstrate that the output state of the mode-locked laser varies with the polarization controlling and the pump power.The periodicity of the polarization controlling is observed.With given pump power,there exists a set of polarization controlling under which the ultra-short pulse can be generated.With given polarization controlling,the mode-locked state can be maintained generally except for some particular values of pump power.Three shapes of the output optical spectra from the fiber cavity can be identified when the pump power changes.The results in this paper provide a comprehensive insight into the operation of the nonlinear polarization rotation-based passively mode-locked fiber laser.     

Optical switching based on the manipulation of microparticles in a colloidal liquid using strong scattering force

This paper demonstrates the realization of an optical switch by optically manipulating a large number of polystyrene spheres contained in a capillary.The strong scattering force exerted on polystyrene spheres with a large diameter of 4.3 μm is employed to realize the switching operation.A transparent window is opened for the signal light when the polystyrene spheres originally located at the beam centre are driven out of the beam region by the strong scattering force induced by the control light.The switching dynamics under different incident powers is investigated and compared with that observed in the optical switch based on the formation of optical matter.It is found that a large extinction ratio of ～ 30 dB and fast switching-on and switching-off times can be achieved in this type of switch.     

An efficient Jacobian scaling method for time-domain optical mammography

<正>Time-domain diffuse optical tomography can efficiently reconstruct optical parameters which can be further applied in diagnosing early breast cancer.Nevertheless,the performances of reconstructed imaging are badly influenced by different Jacobian magnitudes of absorption coefficient and reduced scattering coefficient.With the introudction of a relative data type based on generalized pulse spectrum technique, an efficient Jacobian scaling method is proposed.The interrelated simulated validation is also revealed for the enhancing performances.     

Feedback-controlled nonresonant laser cooling

We present a new approach to nonresonant laser deceleration and cooling of atoms based on their interaction with a bistable optical cavity. The cooling mechanism presents a photonic version of Sisyphus cooling, in which the conservative motion of atoms is interrupted by sudden transitions between two stable states of the cavity mode. The mechanical energy is extracted due to the hysteretic nature of those transitions. The bistable character of the cavity may be achieved by an external feedback loop, or by means of nonlinear intracavity optical elements. In contrast to the conventional cavity cooling, in which atoms experience a viscoustype force, bistable cavity cooling imitates “dry friction” and stops atoms much faster. Based on this novel approach, we explore the prospects of using optical bistability for efficient radiation pressure cooling of micromechanical devices that are modeled as a Fabry-Perot resonator with one fixed and one oscillating mirror. In all cases, analytical results are presented, supported by realistic numerical examples.     

Cooling of a <Emphasis Type="Italic">Λ</Emphasis>-type three-level atom in a high-finesse optical cavity

A theoretical study is carried out for the cavity cooling of a Λ-type three-level atom in a high-finesse optical cavity driven by a weakly field. Analytical expressions for the friction, diffusion coefficients and the equilibrium temperature are obtained by using the Heisenberg equations, then they are calculated numerically and shown graphically as functions of the controlling parameters. For a suitable choice of these parameters, the dynamics of the cavity field interaction with the Λ-type three-level atom introduces a sisyphus cooling mechanism yielding lower temperature than the one of the two-level atom, avoiding the problems induced by spontaneous emission.     

Geometric resonance cooling of polarizable particles in an optical waveguide

In the radiation field of an optical waveguide, the Rayleigh scattering of photons is shown to result in a strongly velocity-dependent force on atoms. The pump field, which is injected in the fundamental branch of the waveguide, is favorably scattered by a moving atom into one of the transversely excited branches of propagating modes. All fields involved are far detuned from any resonances of the atom. For a simple polarizable particle, a linear friction force coefficient comparable to that of cavity cooling can be achieved.     

双光腔耦合下机械振子的基态冷却

机械振子的基态冷却是腔量子光力学中的基本问题之一.所谓的基态冷却就是让机械振子的稳态声子数小于1.本文通过光压涨落谱和稳态声子数研究双光腔光力系统(标准单光腔光力系统中引入第二个光腔,并与第一个光腔直接耦合)的基态冷却.首先得到系统的有效哈密顿量,然后给出朗之万方程和速率方程,最后分别给出空腔和原子腔的光压涨落谱、冷却率和稳态声子数.通过光压涨落谱、冷却率和稳态声子数表达式,重点讨论空腔时机械振子的基态冷却,发现当满足最佳参数条件(机械振子的冷却跃迁速率对应光压涨落谱的最大值,而加热跃迁速率对应光压涨落谱的最小值)时,机械振子可以被冷却到稳态声子数足够少.此外分析:当辅助腔内注入原子系综时,若参数选择恰当可能更利于基态冷却.     

Effect of defects on the electronic structure of a PbI2/MoS2 van der Waals heterostructure: A first-principles study

PbI2/MoS2,as a typical van der Waals(vdW)heterostructure,has attracted intensive attention owing to its remarkable electronic and optoelectronic properties.In this work,the effect of defects on the electronic structures of a PbI2/MoS2 heterointerface has been systematically investigated.The manner in which the defects modulate the band structure of PbI2/MoS2,including the band gap,band edge,band alignment,and defect energy-level density within the band gap is discussed herein.It is shown that sulfur defects tune the band gaps,iodine defects shift the positions of the band edge and Fermi level,and lead defects realize the conversions between the straddling-gap band alignment and valence-band-aligned gap,thus enhancing the light-absorption ability of the material.     

What does friction really depend on? Robust governing parameters in contact mechanics and friction

It is known that the coefficient of friction generally depends on a large number of system and loading parameters. Already Coulomb presented experimental evidence that the static coefficient of friction may depend on time, on normal force, on the contact size, on the nature of contacting materials, and on the presence of intermediate lubricant layers. For the sliding coefficient of friction, he observed the dependence on the sliding velocity as well as the force and size dependencies. Later research has shown that the friction coefficient is very sensitive to the presence of oscillations (including self-excited vibrations). In spite of the practical importance of the problem, no generalized laws of friction or empirical procedures for measuring and representing the law of friction have been developed so far, which included at least the following four parameters: contacting body velocity, normal force, shape (and thus implicitly size), and time. In the present paper, we discuss the question of how the dimension of space of governing parameters can be reduced and if a small set of “robust governing parameters” of friction can be identified. We argue that one of such robust governing parameters is the indentation depth (or relative approach) of contacting bodies and discuss further candidates for the role of robust governing parameters.     

High-reflectivity non-periodic sub-wavelength gratings with small-angle beam-steering ability and its application in Fabry–Perot cavity

We report a high-reflectivity non-periodic sub-wavelength gratings (SWGs) mirror with small-angle beam-steering ability for reflect light. It presents a distinctive characteristic of flexibly controlling the width of oscillation optical field for the improved Fabry–Perot (F–P) cavity. We propose a detailed principle analysis of the improved cavity. By finding out a set of SWGs with the designed structural parameters, both high reflectivity (>?93%) and beam steering (1°) can be implemented. By setting beam-steering angle and cavity length, we can control the width of oscillation optical field in the improved cavity. Beam steering ability and property of controlling the oscillation width are numerically investigated by finite element method. Simulation results prove that cavity length and steering angle can effectively control the main width of oscillation optical field, and the width is linearly associated with the cavity length.     

Cooling in reduced period optical lattices: Non-zero Raman detuning

In a previous paper [Phys. Rev. A 72 (2005) 033415], it was shown that sub-Doppler cooling occurs in a standing-wave Raman scheme (SWRS) that can lead to reduced period optical lattices. These calculations are extended to allow for non-zero detuning of the Raman transitions. New physical phenomena are encountered, including cooling to non-zero velocities, combinations of Sisyphus and “corkscrew” polarization cooling, and somewhat unusual origins of the friction force. The calculations are carried out in a semi-classical approximation and a dressed state picture is introduced to aid in the interpretation of the results.     

迎风凹腔与逆向喷流组合热防护系统冷却效果研究

对迎风凹腔与逆向喷流组合热防护系统的冷却效果进行了分析, 研究了相同总压不同流速的逆向喷流对组合结构的流场、气动受力及壁面传热的影响. 通过与相关的实验结果对比, 验证了数值方法的可靠性. 研究发现:该结构能够有效地对飞行器鼻锥表面进行冷却, 引入很小总压的逆向喷流(逆喷总压比 PR=0.1), 组合结构的冷却效果就可以远远优于单一的迎风凹腔; 相同逆向喷流总压下, 逆喷速度越高, 逆喷流量越大, 外壁面的冷却效果越好; 随逆喷流速提高, 气动阻力也进一步减小. 本文研究的组合结构非常适用于远程、 需长时间飞行的高超声速飞行器的热防护.