The effect of mechanochemical activation upon the intercalation of a high-defect kaolinite with formamide

The effect of mechanochemical activation upon the intercalation of formamide into a high-defect kaolinite has been studied using a combination of X-ray diffraction, thermal analysis, and DRIFT spectroscopy. X-ray diffraction shows that the intensity of the d(001) spacing decreases with grinding time and that the intercalated high-defect kaolinite expands to 10.2 A. The intensity of the peak of the expanded phase of the formamide-intercalated kaolinite decreases with grinding time. Thermal analysis reveals that the evolution temperature of the adsorbed formamide and loss of the inserting molecule increases with increased grinding time. The temperature of the dehydroxylation of the formamide-intercalated high-defect kaolinite decreases from 495 to 470 degrees C with mechanochemical activation. Changes in the surface structure of the mechanochemically activated formamide-intercalated high-defect kaolinite were followed by DRIFT spectroscopy. Fundamentally the intensity of the high-defect kaolinite hydroxyl stretching bands decreases exponentially with grinding time and simultaneously the intensity of the bands attributed to the OH stretching vibrations of water increased. It is proposed that the mechanochemical activation of the high-defect kaolinite caused the conversion of the hydroxyls to water which coordinates the kaolinite surface. Significant changes in the infrared bands assigned to the hydroxyl deformation and amide stretching and bending modes were observed. The intensity decrease of these bands was exponentially related to the grinding time. The position of the amide C=O vibrational mode was found to be sensitive to grinding time. The effect of mechanochemical activation of the high-defect kaolinite reduces the capacity of the kaolinite to be intercalated with formamide.     

Assessment of the surface areas of silica and clay in acid-leached clay materials using concepts of adsorption on heterogeneous surfaces

Two clays of the areas of Kaélé and Kousseri (extreme North Cameroon) containing mainly smectites and minor amounts of kaolinite were activated with sulfuric acid (1 to 8 N). Crystal-chemical properties were studied using X-ray diffraction, Fourier transform infrared spectroscopy, and chemical analysis, while textural properties were analyzed by step-by-step nitrogen adsorption at 77 K and low-pressure quasi-equilibrium argon adsorption at 77 K. As is generally observed, smectite is more sensitive to acid leaching than kaolinite. As a result of smectite decomposition, amorphous Al-containing silica forms, leading to an increase in the specific surface area of the leached materials. The content of the clay minerals and amorphous silica can be estimated on the basis of changes in the chemical composition of the samples upon acid leaching. As far as adsorption energy distributions derived from low-pressure argon derivative adsorption isotherms are concerned, the main modifications occur when 1 N sulfuric acid is used, due to the replacement of calcium and sodium compensating cations by protons. When higher acid concentrations are used, variations in adsorption energy distribution can be assigned to the presence of amorphous silica. It was possible to model experimental adsorption energy distributions as weighted sums of argon adsorption energy distributions obtained on (i) 1 N samples representing protonated clays and (ii) a silica gel used as a reference aluminous silica. Using such an approach, increasing acid concentration results in an increase in the surface area of silica, whereas the surface area of the remaining clay minerals remains roughly constant.     

A DRIFT spectroscopic study of potassium acetate intercalated mechanochemically activated kaolinite

Kaolinite has been mechanochemically activated by dry grinding for periods of time up to 10 h. The kaolinite was then intercalated with potassium acetate and the changes in the structure followed by DRIFT spectroscopy. Intercalation of the kaolinite with potassium acetate is difficult and only the layers, which remain hydrogen bonded, are intercalated. The mechanochemical activation of the kaolinite may be followed by the loss of intensity of the hydroxyl-stretching vibrations. The intensity of the 3695 and 3619 cm(-1) bands reach a minimum after 10 h of grinding. The observation of a band at 3602 cm(-1) is indicative of the intercalation of the kaolinite with potassium acetate. The degree of intercalation decreases with mechanochemical treatment. The effect of exposure of the intercalated mechanochemically activated kaolinite to moist air results in de-intercalation. The effect of the mechanochemical treatment is loss of layer stacking, which prevents the intercalation of the kaolinite.     

Modification of low- and high-defect kaolinite surfaces: implications for kaolinite mineral processing

A comparison is made of the mechanochemical activation of three low- and one high-defect kaolinite using a combination of X-ray diffraction, thermal analysis, and DRIFT spectroscopy. The effect of mechanochemical alteration of the kaolinites is greater for the low-defect kaolinites. The effectiveness of the mechanochemical treatment is represented by the slope of the d(001) peakwidth-grinding time line. High-defect kaolinite is not significantly altered by the grinding treatment. The effect of mechanochemical treatment on peakwidth was independent of the presence of quartz; the quartz acts as an additional grinding medium. The effectiveness of the mechanochemical treatment depends on the crystallinity of the kaolinite. Two processes are identified in the mechanochemical activation of the kaolinite: first the delamination of kaolinite appears to take place in the first hour of grinding and second a recombination process results in the reaggregation of the ground crystals. During this process proton hopping occurs and reaction to form water takes place. This water is then adsorbed and coordinated to surface-active sites created during mechanochemical treatment.     

苯基磺酸官能化中孔硅基材料催化环己酮Aldol缩合反应

2-(1环-己烯基)环己酮是一种植物防腐杀菌剂,作为制备柑桔类水果的保鲜剂、分散染料染色的载体物质邻苯基苯酚(Ortho-phenylphenol,OPP)的原料而备受重视。其与环己叉基环己酮互为同分异构体,均由环己酮A ldol缩合反应合成,该过程是包括醇醛缩合、脱水在内的亲核加成-消除反应,     

Thermo-infrared-spectroscopy analysis of dimethylsulfoxide-kaolinite intercalation complexes

Dimethylsulfoxide (DMSO) kaolinite complexes of low-and high-defect kaolinites were studied by thermo-IR-spectroscopy analysis. Samples were gradually heated up to 170°C, three hours at each temperature. After cooling to room temperature, they were pressed into KBr disks and their spectra were recorded. From the spectra two types of complexes were identified. In the spectrum of type I complex two bands were attributed to asymmetric and symmetric H-O-H stretching vibrations of intercalated water, bridging between DMSO and the clay-O-planes. As a result of H-bonds between intercalated water molecules and the O-planes, Si-O vibrations of the clay framework were perturbed, in the low-defect kaolinite more than in the high-defect. Type II complex was obtained by the thermal escape of the intercalated water. Consequently, the H-O-H bands were absent from the spectrum of type II complex and the Si-O bands were not perturbed. Type I complex was present up to 120°C whereas type II between 130 and 150°C. The presence of intercalated DMSO was proved from the appearance of methyl bands. These bands decreased with temperature due to the thermal evolution of DMSO but disappeared only in spectra of samples heated at 160°C. Intercalated DMSO was H-bonded to the inner-surface hydroxyls and vibrations associated with this group were perturbed. Due to the thermal evolution of DMSO the intensities of the perturbed bands decreased with the temperature. They disappeared at 160°C together with the methyl bands.     

Kaolinite–urea complexes obtained by mechanochemical and aqueous suspension techniques—A comparative study

Intercalation compounds of low- and high-defect kaolinites have been prepared by direct reaction with urea aqueous solution as well as by co-grinding with urea in the absence of water (mechanochemical intercalation). The complexes formed were studied by X-ray diffraction, thermal analysis, DRIFT spectroscopy, and scanning electron microscopy. In aqueous solution the degree of intercalation for the low- and high-defect kaolinites was found to be 77 and 65%, respectively. With mechanochemical intercalation, both kaolinites were almost fully expanded after 1 h of grinding. Based on the results of DRIFT spectroscopy, a structural model for the bonding of urea to the siloxane surface is proposed. The kaolinite–urea intercalation compounds produced by mechanochemical intercalation have crystallite sizes lower than those obtained by the aqueous solution method.     

Studies of natural kaolinite and its modified forms

Modified forms of the natural and annealed at 700°C kaolinite have been fabricated by treatment using hydrochloric acid of different concentrations. The resulting samples were investigated using X-ray fluorescence spectroscopy, X-ray diffraction analysis, IR spectroscopy, and positron annihilation spectroscopy, scanning electron microscopy, etc. The dependencies of elements contents, dye adsorption, specific surface area, and specific internal volume on the concentration of hydrochloric acid have been determined. It has been demonstrated that the changes in the structure of annealed kaolinite were significantly increased by the increase of the concentration of acid, and also there were proportional changes in the values of specific surface area, internal volume, and dye adsorption. Changes in the structural parameters of natural kaolinite depend on the acid concentration in a less degree. Modification with acid results in obtaining solutions that contain metal chlorides. Precipitation of these metals in the form of oxides on the surface of kaolinite particles results in fabrication of new sorbents, whose yield is close to the quantitative one, whereas the kaolinite sorption characteristics become improved. Further kaolinite modification by cellulose under similar conditions results in fabrication of a new, more efficient sorbent. It has been demonstrated that natural kaolinite treated with 12% hydrochloric acid had lower friction coefficient than the annealed one.     

Modification of the Kaolinite Hydroxyl Surfaces through the Application of Pressure and Temperature, Part III

Kaolinite hydroxyl surfaces have been modified by the combined application of heat and pressure in the presence of water at 120 degrees C and 2 bars and at 220 degrees C and 20 bars. X-ray diffraction shows that some of the layers are expanded. It is hypothesized that this expansion occurs at the edges of the crystals due to the intercalation of water. The X-ray diffraction data is supported by diffuse reflectance infrared spectroscopy, with additional hydroxyl stretching bands observed around 3550 and 3590 cm-1. These bands are attributed to adsorbed water and to edge-intercalated water. Additional bands are observed in the hydroxyl deformation region around 895 and 877 cm-1. The position of these bands depends on the defect structure of the kaolinite and the conditions under which the kaolinite was thermally treated. Additional water bending vibrations were observed at 1651 and 1623 cm-1 for the thermally treated high-defect kaolinite and at 1682 and 1610 cm-1 for the low-defect kaolinite. The bands at 1651 and 1682 cm-1 are attributed to the bending modes of water coordinated to the kaolinite surface. The role of water in the edge intercalation of water in the high- and low-defect kaolinites is apparently different. Copyright 1999 Academic Press.     

Role of exchangeable cations on geometrical and energetic surface heterogeneity of kaolinites

Textural and energetic proprieties of kaolinite were studied by low-pressure argon adsorption at 77 K. The heterogeneity of four kaolinites (two low-defect and two high-defect samples) modified on their surface by cation exchange with Li+, Na+, or K+ was studied by DIS analysis of the derivative argon adsorption isotherms. The comparison between the derivative adsorption isotherms shows that the nature of the surface cation influences the adsorption phenomena on edge and basal faces. In the case of basal faces, two adsorption domains are observed: for the first one, argon adsorption is slightly sensitive to the nature of the surface cation; for the second one, argon adsorption energy depends on the nature of surface cation suggesting their presence on theoretically uncharged basal faces. This study also shows that the shape of elementary particles, as derived from basal and edge surface areas, changes with the nature of cation. This anomalous result is due to the decrease of edge surface area with increasing the size of the cation. This surface cation dependence can be accounted for the area occupied by the edge surface cations in the first argon monolayer.     

黏结剂对铁酸锌脱硫剂在高温煤气中脱硫性能的影响

以硝酸铁、硝酸锌、氨水及黏结剂为主要原料,用共沉淀法制成六种铁酸锌脱硫剂。研究了各种黏结剂的加入对脱硫剂的尖晶石结构、硫容量和脱硫效果的影响,在固定床上对其进行脱硫试验。并用X射线衍射（XRD）、扫描电子显微镜(SEM)和气体吸附等测试手段,对脱硫剂的物相组成、结构、比表面积和孔容进行了表征。结果表明,用共沉淀法制备的铁酸锌,具有不受黏结剂影响的尖晶石结构,其颗粒属于微米级;添加高岭土黏结剂的脱硫剂的脱硫效果最好,添加硅藻土的脱硫剂的脱硫效果最差;不同黏结剂对脱硫剂的织构的影响不同;脱硫剂的反应活性和硫容量与其孔容的大小有关。     

Investigation of mechanochemically modified kaolinite surfaces by thermoanalytical and spectroscopic methods

The effect of mechanochemical activation (dry grinding), formamide intercalation, and thermal deintercalation on high- and low-defect kaolinite surfaces was studied by thermogravimetry and diffuse reflectance Fourier transform infrared spectroscopy. These investigations were completed with specific surface area and pore size distribution measurements. The surface acidity of the ground and the ground-and-intercalated kaolinites was probed with ammonia adsorption. The surface area and the pore volume as well as the amount of adsorbed ammonia increased with the rate of mechanochemical activation. At the same time the thermally deintercalated minerals showed increased surface area but decreased pore volume with the time of grinding. Adsorbed ammonia was detected as ammonium ion in the 1400-1500 cm(-1) spectral range.     

固体超强酸SO2-4/ZrO2的制备及其催化性能研究

以氧氯化锆为锆原,氨水为沉淀剂,硫酸溶液为浸渍液,通过沉淀-浸渍法制备SO2-4/ZrO2(SZ)酯化催化剂,其结构经BET、X-射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)及扫描电子显微镜(SEM)表征.结果表明:随着焙烧温度升高,催化剂的比表面积依次降低,孔径增大,氧化锆的晶态由无定形态转化为四方晶态再转化为单斜晶态;于600℃焙烧时,催化剂形成的S=O键红外吸收峰最强;于700℃焙烧时,催化剂结构被破坏.在丙烯酸与十八醇的酯化反应中对催化剂进行活性测试.结果表明:600℃焙烧的催化剂产率最高(96.4%).     

Surface fractal and structural properties of layered clay minerals monitored by small-angle X-ray scattering and low-temperature nitrogen adsorption experiments

Small-angle X-ray scattering of the clay minerals kaolinite, montmorillonite and illite was studied with a compact Kratky camera. From the scattering function, the correlation length, the Porod constant and the specific surface area were determined. The scattering functions also led to the surface fractal dimension. The pore volume distribution, the adsorption/desorption hysteresis, the specific surface area and the surface fractal dimension of the same samples were also determined by nitrogen adsorption at 77 K.     

碳纳米管的功能化及其电化学性能

超级电容器作为一种新型的储能元件,以其快速储存、释放能量等优点,近年来成为各国科研工作的研究重点和焦点[1￣3],并在数据记忆存储系统、便携式仪器设备、后备电源、通讯设备、计算机、燃料电池、电动车混合电源等许多领域都有广泛的应用前景[4]。目前,超级电容器用的电极材     

Characterization of Highly Porous Materials from Cellulose Carbamate

Highly porous cellulose was formed by gelation of cellulose carbamate solutions in caustic soda. Two methods for gel preparation were optimized for the formation of beads and bulky materials – the chemical precipitation from dilute sulfuric acid and the thermal gelation by annealing at elevated temperatures. Various methods were used for characterizing of the pores of low density materials: scanning electron microscopy, small angle X-ray scattering, mercury intrusion and nitrogen sorption. These methods were optimized and used for characterizing the complete pore system from micro to macro pores. The effects of different preparation (cellulose carbamate concentration in caustic soda) and processing (precipitation, drying and pyrolysis) on the pore structure were studied by the set of complementary methods. Aerocell samples with a minimum density of 0.06 g/cm³ were prepared from cellulose carbamate. They are characterized by a broad pore size distribution ranging from 0.5 nm to 1 mm, specific internal surfaces of up to 660 m²/g and total pore volumes of up to 18 cm³/g.     

Synthesis of mesoporous silica materials with ascorbic acid as template via sol-gel process

Mesoporous silica materials with pore diameters of 2-5 nm have been prepared using ascorbic acid as a nonsurfactant template or pore-forming agent in HCl-catalyzed sol-gel reactions of tetraethylorthosilicate,followed by removing the ascorbic acid compound by extraction with ethanol.Characterization results from nitrogen sorption isotherm,powder X-ray diffraction and transmission electron microscopy indicate that the materials have large specific surface areas (e.g.1000 m2/g) and pore volumes (e.g.0.8 cm3/g).The rnesoporosity is arisen from interconnecting disordered wormlike channels and pores with relatively broad size distributions.As the ascorbic acid concentration is increased,the pore diameters and pore volumes of the materials increase.     

Adsorption of NH3 onto activated carbon prepared from palm shells impregnated with H2SO4

Adsorption of ammonia (NH3) onto activated carbons prepared from palm shells impregnated with sulfuric acid (H2SO4) was investigated. The effects of activation temperature and acid concentration on pore surface area development were studied. The relatively large micropore surface areas of the palm-shell activated carbons prepared by H2SO4 activation suggest their potential applications in gas adsorption. Adsorption experiments at a fixed temperature showed that the amounts of NH3 adsorbed onto the chemically activated carbons, unlike those prepared by CO2 thermal activation, were not solely dependent on the specific pore surface areas of the adsorbents. Further adsorption tests for a wide range of temperatures suggested combined physisorption and chemisorption of NH3. Desorption tests at the same temperature as adsorption and at an elevated temperature were carried out to confirm the occurrence of chemisorption due to the interaction between NH3 and some oxygen functional groups via hydrogen bonding. The surface functional groups on the adsorbent surface were detected by Fourier transform infrared spectroscopy. The amounts of NH3 adsorbed by chemisorption were correlated with the contents of elemental oxygen present in the adsorbents. Mechanisms for chemical activation and adsorption processes are proposed based on the observed phenomena.     

Effect of continuous magnetic field on the growth mechanism of nanoporous anodic alumina films on different substrates

The effects induced by an external homogeneous magnetic field on the oxide film growth on aluminum in aqueous solutions of oxalic and sulfuric acid and on surface morphology of the alumina films were studied. Aluminum films of 100 nm thickness were prepared by thermal evaporation on SiO₂/Si and glass-ceramic substrates. The pore diameter for oxalic acid alumina films on the SiO₂/Si substrate decreased by 0.8 nm, the interpore distance by 5.9 nm, and cell diameter by 6.9 nm if a magnetic field of 0.5 T was applied. When aluminum was anodized in sulfuric acid on the same substrate, the significant changes in parameters of porous structure of alumina, which were similar to the ones in oxalic acid, are firstly observed in stronger magnetic fields (of 0.7 T). On the basis of data obtained in this study and of previous investigation on the negative space charge and thermally activated defects in anodic alumina, we concluded that the intensity of the magnetic field is associated with energy of electron traps and that the changes of cell diameter characterize the trap concentration. The energy of electron traps in oxalic acid alumina films was proved to be smaller than the one in films formed in sulfuric acid, but the concentration of traps was of the same order of magnitude. When the substrate was replaced with the glass-ceramic one, the pore diameter in oxalic acid alumina films increased to ca. 17.6 nm.     

凝胶法制备条件对载体硅胶孔结构的影响

以水玻璃、硫酸为原料采用凝胶法制备了烯烃环氧化催化剂载体硅胶,为探讨制备条件对硅胶孔结构的影响,采用物理吸附仪对不同条件下制备的硅胶进行了表征,结果表明:溶胶pH值、老化温度和老化时间、氨水pH值对硅胶孔结构影响显著,当溶胶pH值为1.5,在80℃下用pH 10.5的氨水浸泡老化凝胶2 h,所得硅胶的比表面积在300 m2.g-1左右,孔径和孔容分别在9.71 nm和0.92 cm3.g-1以上,以此硅胶为载体制得的非均相催化剂Ti/SiO2对于氯丙烯和环己基过氧化氢的环氧化反应具有明显的催化活性。