Ag<Subscript>3</Subscript>PO<Subscript>4</Subscript>/Bi<Subscript>2</Subscript>MoO<Subscript>6</Subscript> heterostructures with enhanced visible light photocatalytic activity for the degradation of rhodamine B

Highly efficient visible-light-driven Ag₃PO₄/Bi₂MoO₆ hybrid photocatalysts with different mole ratios of Ag₃PO₄ were prepared via sonochemical method and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results show that product are cubic Ag₃PO₄ nanoparticles supported on orthorhombic Bi₂MoO₆ nanoplates. Under visible light irradiation (>420 nm), the Ag₃PO₄/Bi₂MoO₆ photocatalysts displayed the higher photocatalytic activity than pure Bi₂MoO₆ for the decolorization of rhodamine B (RhB). Among the hybrid photocatalysts, 10% Ag₃PO₄/Bi₂MoO₆ exhibited the highest photocatalytic activity for the decolorization of RhB due to the efficient separation of electron–hole pairs.     

Phase formation in the InPO<Subscript>4</Subscript>-Na<Subscript>3</Subscript>PO<Subscript>4</Subscript>-Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> ternary system

The 950°C isothermal section of the InPO₄-Na₃PO₄-Li₃PO₄ ternary system was studied and constructed; one-, two, and three-phase fields are outlined. Five solid-solution regions exist in the system: solid solutions based on the complex phosphate LiNa₅(PO₄)₂ (olympite structure), the indium ion stabilized high-temperature Na₃PO₄ phase (Na_{3(1 − x)}In _x (PO₄); space group Fm [`3]\bar 3 m), the complex phosphate Na₃In₂(PO₄)₃, and the α and β phases of the compound Li₃In₂(PO₄)₃. A narrow region of melt was found in the vicinity of eutectic equilibria. All the phases detected in the system are derivatives of phases existing in the binary subsystems. Isovalent substitution of lithium for sodium in Na₃In₂(PO₄)₃ leads to a significant increase in the region of a NASICON-like solid solution.     

Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/nitrogen-doped reduced graphene oxide nanocomposite with enhanced lithium storage properties

The three-dimensional porous Li₃V₂(PO₄)₃/nitrogen-doped reduced graphene oxide (LVP/N-RGO) composite was prepared by a facile one-pot hydrothermal method and evaluated as cathode material for lithium-ion batteries. It is clearly seen that the novel porous structure of the as-prepared LVP/N-RGO significantly facilitates electron transfer and lithium-ion diffusion, as well as markedly restrains the agglomeration of Li₃V₂(PO₄)₃ (LVP) nanoparticles. The introduction of N atom also has positive influence on the conductivity of RGO, which improves the kinetics of electrochemical reaction during the charge and discharge cycles. It can be found that the resultant LVP/N-RGO composite exhibits superior rate properties (92 mA h g^?1 at 30 C) and outstanding cycle performance (122 mA h g^?1 after 300 cycles at 5 C), indicating that nitrogen-doped RGO could be used to improve the electrochemical properties of LVP cathodes for high-power lithium-ion battery application.

Open image in new window

Graphical abstract The three-dimensional porous Li₃V₂(PO₄)₃/nitrogen-doped reduced graphene oxide composite with significantly accelerating electron transfer and lithium-ion diffusion exhibits superior rate property and outstanding cycle performance.

     

A novel WO<Subscript>3</Subscript>/MoS<Subscript>2</Subscript> photocatalyst applied to the decolorization of the textile dye Reactive Blue 198

A novel FTO/WO₃ electrode decorated with MoS₂ was constructed using two simple and low-cost techniques involving a modified single-step sol-gel method for the WO₃ film together with the electrodeposition of amorphous MoS₂. The photoelectrocatalytic performance of the material was investigated by monitoring the degradation of Reactive Blue 198 dye under visible-light irradiation. The FTO/WO₃/MoS₂ electrode exhibited excellent photocatalytic activity and afforded total decolorization of the dye after 90 min at low applied current density (5 mA cm^?2). The results described herein support the view that MoS₂ acts as a noble metal-free cocatalyst by promoting H₂ evolution and assisting in the suppression of electron/hole pair recombination in the photocatalytic material (WO₃), thereby improving the process of decolorization of the dye solution. The novel approach of combining of the WO₃ and MoS₂ materials shows particular promise and may prove to be very effective in the photocatalytic degradation of other hazardous organic compounds.     

Graphitic-C<Subscript>3</Subscript>N<Subscript>4</Subscript> quantum dots decorated {001}-faceted TiO<Subscript>2</Subscript> nanosheets as a 0D/2D composite with enhanced solar photocatalytic activity

Zero-dimensional (0D)/two-dimensional (2D) heterojunctions have attracted great attention in photocatalysis due to their superior interfacial effects. In this work, 0D g-C₃N₄ quantum dots (CNQDs) were firstly used to modify {001}-faceted 2D TiO₂ nanosheets by a simple solvothermal method. During the controlled growth of TiO₂ nanosheets with exposed reactive {001} facets, the CNQDs can be simultaneously assembled on the surface of TiO₂ nanosheets in a highly dispersive way. The 0D/2D composite containing only 0.5% of CNQDs shows the optimized solar photocatalytic activity for the degradation of rhodamine B and 4-chlorophenol. More importantly, the 0D/2D composite exhibits a better solar photocatalytic activity than the bulk g-C₃N₄/TiO₂ nanosheets composite. This improvement can be ascribed to the close interfacial contact and strong interaction between the highly dispersed CNQDs and the TiO₂ nanosheets, which could lead to efficient separation of the photogenerated electron–hole pairs, provide more catalytic active sites, and enhance the absorption of solar light. The 0D/2D composite also shows good stability for its practical applications.     

Quantum-chemical study of adsorption of Ag<Subscript>2</Subscript>, Ag<Subscript>4</Subscript>, and Ag<Subscript>8</Subscript> on different parts of the TiO<Subscript>2</Subscript> surface

Quantum-chemical study of the adsorption of two-, four- and eight-atomic silver clusters on stoichiometric and partially reduced rutile (110) surface, and of silver tetramer on the surface of anatase (101) was carried out in the framework of periodic DFT model. The most energetically favorable positions of clusters on the surface of TiO₂ and the mechanism of binding the clusters with the substrate were revealed. According to the calculations, the adsorption of silver clusters on the surface of stoichiometric rutile (110) is more preferable than on the partially reduced one. The mechanism of binding the clusters with the surface of anatase and rutile is shown to be similar.     

Electrochemical sensor using graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanosheets functionalized with garlic extract for the detection of lead ion

Based on the modulated electronic properties of Fe₃O₄-graphene (Fe₃O₄/GN composite) as well as the outstanding complexation between Pb²⁺ and natural substances garlic extract (GE), a novel electrochemical sensor for the determination of Pb²⁺ in wastewater was prepared by immobilization of Fe₃O₄/GN composite integrated with GE onto the surface of glassy carbon electrode (GCE). Fe₃O₄/GN composite was employed as an electrochemical active probe for enhancing electrical response by facilitating charge transfer while GE was used to improve the selectivity and sensitivity of the proposed sensor to Pb²⁺ assay. The electrochemical sensing performance toward Pb²⁺ was appraised by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV). Under the optimized condition, the sensor exhibited two dynamic linear ranges (LDR) including 0.001 to 0.5 nM and 0.5 to 1000 nM with excellent low detection limit (LOD) of 0.0123 pM (S/N =?3) and quantification limit (LOQ) of 0.41 pM (S/N =?10). Meanwhile, it displayed remarkable stability, reproducibility (RSD of 3.61%, n =?3), and selectivity toward the assay for the 100-fold higher concentration of other heavy metal ions. Furthermore, the novel sensor has been successfully employed to detect Pb²⁺ from real water samples with satisfactory results.     

Structural relaxation of scintillating Ce-doped NaGd(PO<Subscript>3</Subscript>)<Subscript>4</Subscript> glass

Structural relaxation of scintillating Ce-doped Na–Gd phosphate glass with a nominal composition of Ce:NaGd(PO₃)₄ was experimentally studied using non-isothermal thermo-mechanical analysis, and the relaxation process was described by the Tool–Narayanaswamy–Mazurin model. The distribution of relaxation times was expressed by the empirical Kohlrausch–Williams–Watts relaxation function with relaxation time directly proportional to dynamic viscosity. The model parameters and material constants were obtained by the nonlinear regression analysis of thermo-mechanical data. It has been concluded that the model used of structural relaxation correctly describes relaxation processes in studied Ce-doped NaGd(PO₃)₄ glass.     

Synthesis of ammonia from natural gas at atmospheric pressure with doped ceria–Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>–K<Subscript>3</Subscript>PO<Subscript>4</Subscript> composite electrolyte and its proton conductivity at intermediate temperature

A new type of oxide–salt composite electrolyte, yttrium doped ceria YDC–Ca₃(PO₄)₂–K₃PO₄, was developed and demonstrated for its promising use for ammonia synthesis. Using this composite electrolyte, ammonia was synthesized from nitrogen and natural gas at atmospheric pressure in the solid-state proton conducting cell reactor, and the optimal condition for ammonia production was determined . The evolved rate of ammonia is up to 6.95×10⁻⁹ mol s⁻¹ cm⁻².     

Phase formation in the Ag<Subscript>2</Subscript>MoO<Subscript>4</Subscript>-MgMoO<Subscript>4</Subscript>-Al<Subscript>2</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>3</Subscript> system

The subsolidus region of the Ag₂MoO₄-MgMoO₄-Al₂(MoO₄)₃ ternary salt system has been studied by X-ray phase analysis. The formation of new compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ (0 ≤ x ≤ 0.4) and AgMg₃Al(MoO₄)₅ has been determined. The Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ variable-composition phase is related to the NASICON type structure (space group R \(\bar 3\) c). AgMg₃Al(MoO₄)₅ is isostructural to sodium magnesium indium molybdate of the same formula unit and crystallizes in triclinic system (space group P \(\bar 1\), Z = 2) with the following unit cell parameters: a = 9.295(7) Å, b = 17.619(2) Å, c = 6.8570(7) Å, α = 87.420(9)°, β = 101.109(9)°, γ = 91.847(9)°. The compounds Ag_{1 ? x} Mg_{1 ? x} Al_{1 + x} (MoO₄)₃ and AgMg₃Al(MoO₄)₅ are thermally stable up to 790 and 820°C, respectively.     

Impact of carbon coating thickness on the electrochemical properties of Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites

A series of Li₃V₂(PO₄)₃/C composites with different amounts of carbon are synthesized by a combustion method. The physical and electrochemical properties of the Li₃V₂(PO₄)₃/C composites are investigated by X-ray diffraction, element analysis, Raman spectroscopy, scanning electron microscopy, transmission electron microscopy and electrochemical measurements. The effects of carbon content of Li₃V₂(PO₄)₃/C composites on its electrochemical properties are conducted with cyclic voltammetry and electrochemical impedance. The experiment results clearly show that the optimal carbon content is 4.3 wt %, and more or less amount of carbon would be unfavorable to electrochemical properties of the Li₃V₂(PO₄)₃/C electrode materials. The results would provide some basis for further improvement on the Li₃V₂(PO₄)₃ electrode materials.     

Synthesis of hydroxyapatite by hydrolysis of α-Ca<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>

Conditions for hydroxyapatite (HAP) synthesis in aqueous solutions by hydrolysis of α-Ca₃(PO₄)₂ were studied. Temperature exerts a substantial effect on the rate of α-Ca₃(PO₄)₂ hydrolysis and also changes the morphology of the reaction products. At 40 °C, the plate-like intersecting (perpendicular to the surface of the initial particles) crystals of HAP grow. Their maximum size after the 24-h hydrolysis is 1–2 µm. Needle like HAP crystals are formed upon boiling of the suspension. The morphology observed for the HAP particles agrees well with the conclusions obtained by analysis of the kinetics of tricalcium phosphate hydrolysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 78–85, January, 2005.     

Synthesis and structure of phosphates M<Subscript>0.5</Subscript>Ti<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>

Phosphates M_0.5Ti₂(PO₄)₃ (M = Ni, Zn) were synthesized by the sol-gel method and characterized by the methods of X-ray diffraction, IR spectroscopy, and electronic microprobe analysis. Structures of Ni_0.5Ti₂(PO₄)₃ and Zn_0.5Ti₂(PO₄)₃ were studied by Rietveld method using the X-ray powder diffraction data.     

Synthesis and characterization of macroporous Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C composites as cathode materials for Li-ion batteries

The macroporous Li₃V₂(PO₄)₃/C composite was synthesized by oxalic acid-assisted carbon thermal reaction, and the common Li₃V₂(PO₄)₃/C composite was also prepared for comparison. These samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), and electrochemical performance tests. Based on XRD and SEM results, the sample has monoclinic structure and macroporous morphology when oxalic acid is introduced. Electrochemical tests show that the macroporous Li₃V₂(PO₄)₃/C sample has a high initial discharge capacity (130 mAh g⁻¹ at 0.1 C) and a reversible discharge capacity of 124.9 mAh g⁻¹ over 20 cycles. Moreover, the discharge capacity of the sample is still 91.5 mAh g⁻¹, even at a high rate of 2 C, which is better than that of the sample with common morphology. The improvement in electrochemical performance should be attributed to its improved lithium ion diffusion coefficient for the macroporous morphology, which was verfied by cyclic voltammetry and electrochemical impedance spectroscopy.     

Moderate-temperature protonic conductors based on CsH<Subscript>2</Subscript>PO<Subscript>4</Subscript> and modified silicon dioxide

With the aim of creating an inert matrix for composite in the (1 ? x) CsH₂PO₄ ? xSiO₂ system, the surface of finely divided dioxide is modified and matrices with more acid centers are produced. Physicochemical properties of composite systems on the basis of these are studied. The role played by acid centers in the formation of more stable and better conductive composite systems in the temperature interval 150 to 250°C is demonstrated. The conductivity of composites based on silicon dioxide modified with CsHSO₄ or H₃PO₄ at 130–230°C is shown to exceed that of the initial phase CsH₂PO₄ and the composite systems based on uniformly porous silicon dioxide with the surface acidity pH ～7 studied previously. The composites are of interest for further research. Compositions of phases under formation and conditions for their existence are determined.     

Sol-assisted spray-drying synthesis of porous Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C microspheres as high-activity cathode materials for lithium-ion batteries

Herein, porous Li₃V₂(PO₄)₃/C microspheres made of nanoparticles are obtained by a combination of sol spray-drying and subsequent-sintering process. Beta-cyclodextrin serves as a special chelating agent and carbon source to obtain carbon-coated Li₃V₂(PO₄)₃ grains with the size of ca. 30–50?nm. The unique porous structure and continuous carbon skeleton facilitate the fast transport of lithium ion and electron. The Li₃V₂(PO₄)₃/C microspheres offer an outstanding electrochemical performance, which present a discharge capacity of 122?mAh?g^?1 at 2?C with capacity retention of 96% at the end of 1000 cycles and a high-rate capacity of 113?mAh?g^?1 at 20?C in the voltage window of 3.0–4.3?V. Moreover, the Li₃V₂(PO₄)₃/C microspheres also give considerable cycling stability and high-rate reversible capacity at a higher end-of-charge voltage of 4.8?V.

Open image in new window

     

Facile ultrasonic-assisted preparation of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/Ag<Subscript>3</Subscript>VO<Subscript>4</Subscript> nanocomposites as magnetically recoverable visible-light-driven photocatalysts with considerable activity

In this work, a facile ultrasonic-assisted method was applied for preparation of Fe₃O₄/Ag₃VO₄ nanocomposites with different compositions. The as-prepared products were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive analysis of X-rays, UV–Vis diffuse reflectance spectroscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometery. Photocatalytic degradation of rhodamine B under visible-light irradiation was investigated, and it was found that weight ratio of Fe₃O₄–Ag₃VO₄ has significant influence on the photocatalytic activity and the nanocomposite with 1:4 weight ratio of Fe₃O₄–Ag₃VO₄ has superior activity. In addition, the nanocomposite showed great activities in degradations of methylene blue and fuchsine, which are comparable with activity of the pure Ag₃VO₄. More importantly, this nanocomposite displayed remarkable saturation magnetization, leading to easily and quickly separation of its suspension from treated system by applying a magnetic field.     

Thermodynamic study of Ag<Subscript>8</Subscript>GeSe<Subscript>6</Subscript> by EMF with an Ag<Subscript>4</Subscript>RbI<Subscript>5</Subscript> solid electrolyte

The Ag–Ge–Se system was studied in the range of compositions Ag₂Se–GeSe₂–Se by measuring the EMF of the concentration (relative to the silver electrode) circuits with a solid electrolyte Ag₄RbI₅ in the temperature range 290–430 K. The polymorphic transition temperature of Ag₈GeSe₆ (320 K) was determined and the partial molar functions of silver were calculated for both crystal modifications of this compound based on the EMF measurements. The thermodynamic functions of formation and entropy of both modifications of Ag₈GeSe₆ and the thermodynamic functions of its polymorphic transition were calculated.     

Lithium-conducting solid electrolytes of Li<Subscript>4</Subscript>GeO<Subscript>4</Subscript>-Li<Subscript>3</Subscript>PO<Subscript>4</Subscript> system with additions of zirconium ions

The effect of partial substitution of Zr⁴⁺ ions for Ge4+ ions in highly conducting lithium-cationic solid electrolyte Li_3.75Ge_0.75P_0.25O₄ is studied. It is found that the introduction of zirconium ions considerably raises the conductivity of basic electrolyte in the high-temperature range. For the optimal composition, the conductivity is 2.82 × 10⁻¹ S cm⁻¹ at 400°C and 1.55 S cm⁻¹ at 700°C. Possible reasons for the effects are discussed.     

A high mass loading electrode based on ultrathin Co<Subscript>3</Subscript>S<Subscript>4</Subscript> nanosheets for high performance supercapacitor

There is a growing need for the electrode with high mass loading of active materials, where both high energy and high power densities are required, in current and near-future applications of supercapacitor. Here, an ultrathin Co₃S₄ nanosheet decorated electrode (denoted as Co₃S₄/NF) with mass loading of 6 mg cm^?2 is successfully fabricated by using highly dispersive Co₃O₄ nanowires on Ni foam (NF) as template. The nanosheets contained lots of about 3～5 nm micropores benefiting for the electrochemical reaction and assembled into a three-dimensional, honeycomb-like network with 0.5～1 μm mesopore structure for promoting specific surface area of electrode. The improved electrochemical performance was achieved, including an excellent cycliability of 10,000 cycles at 10 A g^?1 and large specific capacitances of 2415 and 1152 F g^?1 at 1 and 20 A g^?1, respectively. Impressively, the asymmetric supercapacitor assembled with the activated carbon (AC) and Co₃S₄/NF electrode exhibits a high energy density of 79 Wh kg^?1 at a power density of 151 W kg^?1, a high power density of 3000 W kg^?1 at energy density of 30 Wh kg^?1 and 73 % retention of the initial capacitance after 10,000 charge-discharge cycles at 2 A g^?1. More importantly, the formation process of the ultrathin Co₃S₄ nanosheets upon reaction time is investigated, which is benefited from the gradual infiltration of sulfide ions and the template function of ultrafine Co₃O₄ nanowires in the anion-exchange reaction.

Open image in new window

Graphical abstract The ultrathin 2D Co₃S₄ nanosheets fabricated on 3D Ni foam and the formation process of the ultrathin Co₃S₄ nanosheets upon reaction times has been investigated. At the same time, the Co₃S₄/NF electrode displays an outstanding specific capacitance of 2420 F g^?1 at 1 A g^?1 with high mass loading of 6 mg cm^?2.