Metallothioneins from horse kidney studied by separation with capillary zone electrophoresis below and above the isoelectric points

Capillary zone electrophoresis (CZE) was used to study metallothionein (MT) isoforms and non-MT components in the horse kidney MT preparation produced by Sigma. This technique was found to be well suited for studies of such forms. The non-MTs are heat resistant, they do not bind metal, but comigrate with MT in the various systems generally used for MT isolations. These forms may cause discrepancies between claimed MT content and sample weight as well as confusion in MT identification. The functional metal binding ability in the Sigma sample was measured, and the elution profile from an anion exchange column, commonly used for separation of tissue MTs, was determined in order to ascertain the MT-I isoform content. Optimum conditions for the separation of the MT isoforms have been studied in the polyacrylamide coated capillary at pHs below and above the isoelectric points (pIs) in various buffer systems. Evidence is put forward that MT forms oligomers or aggregates in the metal binding situation at pHs above pI. Our results may indicate that the oligomerized MT-IA form binds additional Cd atoms than the expected number of seven per monomer.     

金属硫蛋白异构体及亚型异构体的液相色谱分离与质谱鉴别

建立了金属硫蛋白(MT)异构体及亚型异构体的色谱分离与质谱鉴别方法。将金属硫蛋白混合物通过弱阴离子DEAE Sephadex A-25离子交换柱,结合离线电感耦合等离子体质谱(ICP-MS)对锌诱导金属硫蛋白的两个异构体MT-1和MT-2进行分离和检测;利用Sephadex G-25凝胶排阻色谱柱对得到的两个金属硫蛋白异构体进行脱盐;探索脱盐后的金属硫蛋白异构体在不同色谱条件下的C18反相色谱柱上的保留行为,进而实现各个亚型异构体的分离;通过在线电喷雾质谱检测实现了对金属硫蛋白各个亚型异构体的鉴别。结果表明,通过优化色谱条件,由离子交换色谱及凝胶排阻色谱得到的金属硫蛋白各亚型异构体在酸性条件下均得到了良好的分离,质谱检测结果与前人的文献报道结果一致。该方法可使金属硫蛋白各异构体均达到最佳的分离效果。     

The determination of environmental and industrial exposure to heavy metals based on the quantitative isolation of metallothionein from human fluids, with application of covalent affinity chromatography with thiol-disulphide interchange gel as a solid-phase extraction support

The aim of this study was to present a new analytical method for the quantitative determination of metallothionein (MT) proteins in human body fluids and tissues, in order to determine the level of environmental and industrial exposure to heavy metals. For MT isolation, covalent affinity chromatography with thiol-disulphide inter-change (CAC-TDI) was applied. Fundamentals of indirect determination of the contents of metallothionein proteins were worked out through estimation of the quantities of metals bound with metallothionein protein and adsorbed on covalent affinity chromatography gel as on solid-phase extraction support during separating process. The (CAC-TDI) gel, specially prepared, was used as a solid phase extraction support (SPE) for preconcentration of Hg-thionein (Hg-Th), Cd-thionein (Cd-Th), Zn-thionein (Zn-Th) and Cu-thionein (Cu-Th) proteins and Hg, Cd, Zn and Cu bonded with MTs from water, human fluids such as: urine, human plasma, breast milk and tissues homogenates.     

Separation and characterization of rabbit liver apothioneins by capillary electrophoresis coupled to electrospray ionization time-of-flight mass spectrometry

The present study establishes a method for the separation and characterization of rabbit liver metallothionein (MT) subisoforms by capillary electrophoresis coupled to electrospray ionization time-of-flight mass spectrometry (CE-ESI-TOF-MS) via a sheath-flow interface. Directly coupled-CE-MS enables the extraction of specific molecular weight information and thereby facilitates the identification of peaks when no reference materials are available, as in the case of MT subisoforms. The analysis described here revealed the presence of the apothioneins MT-1a, MT-2d, and MT-2e, belonging to MT-I sample, and MT-2a, MT-2b, and MT-2c, belonging to MT-II. Several non-N-acetylated forms were also detected as traces appearing with their respective acetylated forms in both samples. Similar results were found when MALDI-TOF experiments were performed, identifying all the sequenced rabbit liver MTs as apo-MT-forms, as in the CE-ESI-MS coupling.     

Analysis of metallothionein isoforms by capillary electrophoresis: optimisation of protein separation conditions using micellar electrokinetic capillary chromatography

Capillary electrophoresis (CE) techniques have been successfully applied to the separation of metallothionein (MT) isoforms and have proved to be rapid, practical and economical. Study of a variety of different electrolytes and capillaries has shown that electrolyte buffer composition and capillary wall surface modifications can have considerable influence on isoform separation and resolution. Ionic surfactants such as sodium dodecyl sulphate (SDS) form micelles at elevated concentrations and the partitioning of molecules between the hydrophobic micelle phase and the aqueous phase and their resulting migration in an electric field is the basis of the technique known as micellar electrokinetic capillary chromatography (MECC). In the present work, we have used sheep and rabbit MT to optimise MECC conditions for analysis of MT isoforms. Capillaries of 57 cm gave much better separations than shorter columns although analysis times were increased to about 12 min. Changing the buffer and SDS concentration or the pH affected the selectivity of isoform separation and up to 5 isoforms in sheep MT and 6 in rabbit MT were completely or partially resolved. Comparing different diameter capillaries we conclude that 25 μm I.D. columns give better separations than 50 or 75 μm I.D. columns although sensitivity is reduced by a factor of about 3 and 5, respectively. Using our MECC conditions, columns coated with C₁ or C₁₈ hydrophobic material were not found to be useful in improving MT separation or resolution although further evaluation of these columns is in progress. Analysis of sheep liver extracts using optimised conditions showed the expression of at least 4 MT isoforms in response to Zn injection and 3 of these forms were evident in extracts from untreated sheep. We therefore conclude that MECC is a suitable method for MT isoform analysis.     

Evaluation of different purification procedures for the electrochemical quantification of mussel metallothioneins

Several different procedures were applied to purify metallothionein (MT) isolated from the digestive glands of the mussels (Mytilus galloprovincialis) exposed to cadmium: heat treatment (at 70 and 85 °C), solvent precipitation, and gel-filtration. Using electrochemical method, the MT contents were determined. Based on the obtained results each procedure was statistically evaluated. Application of the post-hoc Scheffé test showed that there were significant differences between all the treatments applied. Heat treatment and solvent precipitation effectively remove high molecular weight (HMW) proteins from the samples. In untreated as well as in heat or solvent treated samples MT10 isoform remains unchanged. MT20 isoform is significantly reduced by heat treatment and drastically reduced by solvent precipitation. Due to the fact that MT20 is considered as ‘target’ MT isoform for metal effect and exposure it is recommended to use the purification procedure which less affects MT20 fraction. According to the presented results it is the heat treatment.     

Differential pulse anodic stripping voltammetry detection of metallothionein at bismuth film electrodes

As a representation of metalloproteins, metallothionein (MT), which plays important biological and environmental roles such as in the metabolism and detoxification of some metals, was detected at bismuth film electrode (BiFE) by differential pulse anodic stripping voltammetry (DPASV). In pH 2–5.5, two well-defined anodic peaks were produced and attributed to the Zn²⁺ and Cd²⁺ inherent to MT. The calibration plot of DPASV peak currents for Cd²⁺ inherent to MT versus MT concentrations showed a good linearity with a detection limit of 3.86 × 10⁻⁸ mol/L for MT. As a non-toxic excellent electrode material, BiFE shows good performance for detecting MT, and is expected to find further applications in the studies of many other metalloproteins.     

Development of surface plasmon resonance-based sensor for detection of silver nanoparticles in food and the environment

Silver nanoparticles are recognized as effective antimicrobial agents and have been implemented in various consumer products including washing machines, refrigerators, clothing, medical devices, and food packaging. Alongside the silver nanoparticles benefits, their novel properties have raised concerns about possible adverse effects on biological systems. To protect consumer's health and the environment, efficient monitoring of silver nanoparticles needs to be established. Here, we present the development of human metallothionein (MT) based surface plasmon resonance (SPR) sensor for rapid detection of nanosilver. Incorporation of human metallothionein 1A to the sensor surface enables screening for potentially biologically active silver nanoparticles at parts per billion sensitivity. Other protein ligands were also tested for binding capacity of the nanosilver and were found to be inferior to the metallothionein. The biosensor has been characterized in terms of selectivity and sensitivity towards different types of silver nanoparticles and applied in measurements of real-life samples-such as fresh vegetables and river water. Our findings suggest that human MT1-based SPR sensor has the potential to be utilized as a routine screening method for silver nanoparticles, that can provide rapid and automated analysis dedicated to environmental and food safety monitoring.     

Employment of Electrochemical Techniques for Metallothionein Determination in Tumor Cell Lines and Patients with a Tumor Disease

In the present paper we employed adsorptive transfer stripping technique coupled with chronopotentiometric stripping analysis for determination of metallothionein (MT) in tumor cell lines and differential pulse voltammetry Brdicka reaction for determination of MT in blood serum of patients with head and neck cancer or retinoblastoma, and of rats treated with cisplatin with respect to discuss the role of MT in formation of resistance on treatment with heavy metal based cytostatics. The cisplatin or carboplatin sensitive and resistant neuroblastoma cell lines were derived from the maternal cell line isolated from the bone metastasis of patients with neuroblastoma. Based on the results obtained it can be concluded that level of MT increases with higher dose of platinum based cytostatics at cells. Further we focused on determination of MT in blood serum of rats treated with cisplatin (two doses 1.05 mg and/or 2.1 mg of cisplatin per kg). The highest level of MT at rats treated with 1.05 mg cisplatin was determined after four hours as 4.9 μmol/L. In the case of the second experimental group the maximum was reached even after two hours of the treatment as 4.8 μmol/L. In addition we were interested in the effect of cisplatin or carboplatin treatment of patients with a tumor disease. At patients with tumor in head and neck area treated with cisplatin we observed that the level of MT was going higher due to administration of the drug. This phenomenon was observed at all patients. However at patients with retinoblastoma treated with carboplatin we observed various phenomena including decreasing, increasing or no changes in MT level. Progression of MT levels was therefore individual and probably depended on tumor resistance to carboplatin.     

Electrochemical study of heavy metals and metallothionein in yeast Yarrowia lipolytica

The bioaccumulation of heavy metals (cadmium, nickel, cobalt and zinc) and the effect of these metals on the production of metallothionein and metallothionein-like proteins (MT) in Yarrowia lipolytica was studied by electrochemical methods. The concentrations of heavy metals were determined by differential pulse voltammetry (DPV). A combination of the constant current chronopotentiometric stripping analysis (CPSA) and adsorptive transfer stripping technique (AdTS) was used to determine the content of MT in cells. Both the bioaccumulation of heavy metals and the production of MT in different cell compartments of Y. lipolytica exposed to heavy metals were monitored. The LD(50) of each metal was determined from the number of viable cells in yeast cultures: LD(50)Cd (37.5 microM), LD(50)Ni (570 microM), LD(50)Co (700 microM), and LD(50)Zn (1800 microM). The highest concentrations of heavy metals were found in the cell wall and membrane debris while the lowest concentrations were detected in the cytoplasm. Cadmium and nickel showed the most significant effect on the production of MT. This study provides new insights into the ecophysiology of microorganisms and demonstrates the potential use of these electrochemical methods in biotechnology.     

GIF S-亚硝基化的一些见解

Neural growth inhibitory factor （GIF）, a member of metallothionein family （metallothionein-3, MT3）, was well known by its distinct neural growth inhibitory activity, which is not shown by other MT isoforms. However, till now, people still did not know clearly how GIF exerts its biological functions. Since it has been reported that GIF might serve as NO scavenger and was related to the release of zinc, our study was focused on the interaction of GIF and NO. By studying the reactions of human GIF and human MTlg with SNOC-a type of NO donor, it was found that GIF was more reactive than MT-lg toward SNOC. In order to further figure out if the high reactivity of GIF in this reaction resulted from the acid-base catalysis, several mutants were constructed： E23K, E41G/E43A, E23K/E41G/E43A. By studying their basic properties and the reactions toward SNOC, it was found that the S-nitrosylation of GIF was not only related to the acid-base catalysis, but also to the accessibility of metal-thiolate clusters.     

Catalytic signal of rabbit liver metallothionein on a mercury electrode: a combination of derivative chronopotentiometry with adsorptive transfer stripping

Constant current chronopotentiometric stripping analysis (CPSA) in combination with adsorptive transfer stripping (AdTS) technique was used to study the rabbit liver metallothionein (MT) on a hanging mercury drop electrode (HMDE). Metallothionein yielded a distinct, sharp chronopotentiometric signal at very negative potentials (about -1.7 V), also known as the "peak H". The height and potential of this peak were dependent on experimental conditions, such as buffer composition, pH, and the presence oxygen in solutions. The peak H was highest in borate buffer with pH close to the isoelectric point (pI) of MT. The chronopotentiometric results contribute to a deeper understanding of the nature of catalytic hydrogen evolution and demonstrate the usefulness of the peak H in peptide and protein research.     

Metallothionein quantification in clams by reversed-phase high-performance liquid chromatography coupled to fluorescence detection after monobromobimane derivatization

In this paper, we describe a highly specific, sensitive and reliable method for total metallothionein (MT) quantification by RP-HPLC coupled to fluorescence detection following reaction with monobromobimane of thiols from metal-depleted MT after heat-denaturation of extracts in the presence of sodium dodecyl sulphate (SDS). SDS-polyacrylamide gel electrophoresis (SDS-PAGE) confirmed the identity of the peak resolved (t(R)=16.44) with MT: a highly fluorescent protein of approximately 8.3 kDa, in agreement with the high thiol content and low MT size. Other heat-resistant and Cys-containing proteins of 35 kDa were efficiently separated. The new method was successfully used to quantify MT content in digestive gland of clams from southern Spanish coastal sites with different metal levels, and is proposed as a tool for using MTs as biomarker in monitoring programmes.     

Electrochemical methods for quantification and characterization of metallothioneins induced in Mytilus galloprovincialis

The quantification of the purified metallothionein (MT) component, isolated from the digestive gland of cadmium-exposed Mytilus galloprovincialis, is described based on the analysis of Cd(II) and SH-groups content, applying electrochemical methods. Advantages and disadvantages of the Brdicka procedure for the determination of the MT content is discussed. The saturation of binding positions of purified MT with Cd(2+) ions can be directly followed voltammetrically. Irrespective of the MT concentration, the saturation with Cd(2+) of in vivo induced mussel MT is achieved at a molar ratio of 5. Cd(2+) ions are rapidly displaced from the Cd-Th complex after the addition of Pb(2+) ions, which indicates the kinetically labile type of the complex.     

Amino acids and peptides. XXXIII. Synthesis of N-terminal epitope peptides of mammalian metallothioneins (MTs).

In order to determine the fine structure of the mammalian metallothionein (MT) epitope to a monoclonal anti-rat Zn-MT-II antibody (MT 189-14-7), N-terminal peptides of various lengths of mammalian metallothioneins (MTs) were synthesized by a conventional solution method using the newly developed beta-2-adamantylaspartate, and their immunological properties were examined. It was found that the N-terminal acetyl group was indispensable for the reaction with the monoclonal antibody and the N-terminally acetylated pentapeptide, Ac-Met-Asp-Pro-Asn-Cys-OH, was the smallest peptide which exhibited a significant reactivity with the antibody.     

金属硫蛋白的分离与纯化

金属硫蛋白(MT)是一类低分子量、高巯基含量,能大量结合重金属离子的蛋白质.本文从诱导剂的注射次数、家兔体重以及不同诱导剂等因素对家兔体内金属硫蛋白含量的影响进行了分析.金属硫蛋白氨基酸组分分析结果与文献报道一致.利用精品生产工艺对金属硫蛋白粗品进行纯化,结果令人满意.     

Evaluation of cadmium–metallothionein stability constants based on voltammetric measurements

A voltammetric study on the binding properties of the commercially available rabbit liver metallothionein (MT) Sigma M 7641 for cadmium ions was performed. The capacity of metallothionein to complex cadmium and the stability constants of Cd–T complex (T denotes the apoprotein or thionein molecule) have been determined from the direct titration of the defined MT concentration with the standard CdCl₂ solution in 0.59 M sodium chloride medium at pH 7.9 and 2.0. At pH 7.9 the formation of the Cd–T complex has been followed measuring the specific anodic signal height of the complex. Stability constants of Cd–T have been evaluated from the experimental data using three different procedures. The calculated apparent stability constants K=(7.6±0.2)·10⁸ dm³ mol⁻¹ of Cd–T complex in 0.59 M NaCl at pH 7.9 and 25°C indicate that under the given experimental conditions all the three procedures are equally applicable.     

非标记铕配合物荧光免疫分析法研究: 测定血清中的金属硫蛋白

本文报告一种新型非同位素免疫分析法, 非标记稀土铕配合物荧光免疫分析。它仍以免疫反应为基础, 所不同的是无须制备标记物。较标记免疫分析法简便、快速、在所建立的方法中, 金属硫蛋白(MT)的量与Eu-β-二酮配合物的荧光强度成负相关。测定范围为0-1.3μg/mL, 测定血清中MT的回收率为95%-100%, 相对标准偏差<10%。     

3-甲基噻吩在离子液体 BMIMPF6中的电化学聚合、表征及应用

Poly-3-methylthiophene （P3MT） was synthesized in the room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate （[BMIM]PF6） by constant potential and constant current respectively. The structure and morphology of P3MT films were characterized by FTIR spectrum and SEM. The undoped （reduction） and doped （oxidation） forms of P3MT film prepared in ionic liquid were reversible and stable. The P3MT film has strong characteristics of electrocatalytic oxidation of ascorbic acid and can separate the oxidation peaks of ascorbic acid and dopamine. Two methods of potential steps were used to observe the response time of the film and the film was found to have perfect electrochromic response.     

猴金属硫蛋白MT1 α-结构域中Cys33和Cys34的突变对蛋白质稳定性的影响

重组猴金属硫蛋白MT1及其C33M,C34S和C33M/C34S突变体蛋白的蛋白质快速液相色谱(FPLC)分析表明,突变体蛋白C34S和C33M/C34S存在着两个稳定的流分f1和f2.CD光谱和重金属离子分析表明,突变体蛋白多流分不仅与半胱氨酸和Cd2+离子结合方式和构型有关,还与金属结合量有关.突变体蛋白多流分的结果表明,在把猴金属硫蛋白α-结构域中的Cys33和Cys34突变为非半胱氨酸残基以建立β-β结构域的金属硫蛋白时,可导致蛋白形成多种结构形式.这表明α-结构域在稳定金属硫蛋白的结构中起着重要的作用,半胱氨酸残基在肽链上的分布对金属硫蛋白的三级结构和金属硫簇的形成有重大的影响.