Triton X-100存在下镉试剂分光光度法测定痕量铊(III)

本文首次提出了在Triton X-100存在下, 以镉试剂作显色剂于水相直接分光光度法测定了痕量铊, 结果表明: 该体系具有很高的灵敏度, 是目前分光光度法测定铊的最灵敏方法之一.     

Spectrophotometric determination of micro amounts of cadmium in waste water with cadion and triton X-100

A spectrophotometric method for determination of micro amounts of cadmium in waste water with Cadion and Triton X-100 is described. The interference of foreign ions can be eliminated by masking with an ascorbic acid-Rochelle salt-potassium cyanide-potassium fluoride mixture. After demasking with formalin, cadmium is determined directly in aqueous solution without separation. Beer's law is obeyed for 0-8 mug of Cd in 25 ml of solution. The method is more sensitive than the dithizone method, its apparent molar absorptivity at 480 nm being 1.19 x 10(5) 1. mole(-1). cm(-1). Results obtained by using the proposed method on waste water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Triton X-100增敏光度法测定铝土矿中的微量钪

研究了在HCl溶液中微量钪(Ⅲ)-偶氮氯膦Ⅲ(CPAⅢ)之间的配合反应。结果表明,在0.5mol/LHCl溶液中和TritonX 100的存在下,有色溶液的最大吸收波长为680nm,表观摩尔吸光系数为2.62×104L·mol-1·cm-1。钪(Ⅲ)质量浓度在0～0.45mg/L范围内符合比耳定律,钪(Ⅲ)的加标回收率在98.0%～105.1%之间,RSD(n=6)为2.1%～2.6%。可用于铝土矿中的微量钪的测定。     

Spectrophotometric determination of mercury(II) and silver(I) with copper(II) and diethyldithiocarbamate in the presence of triton X-100

Procedures for the determination of mercury and silver by displacement of diethyldithiocarbamate (DDTC) from its copper complex in the presence of 1% Triton X-100, and measurement of the decrease in the Cu(DDTC)(2) absorbance, are described. The use of the surfactant avoids the need for an extraction step. Reproducibility within 1% and detection limits of 0.25 ppm Hg(II) and 0.45 ppm Ag(I) have been obtained, and linear calibration ranges up to 13 ppm Hg(II) and 15 ppm Ag(I). In the presence of 0.1M EDTA very good selectivity is achieved.     

Ternary complexes in the spectrophotometric determination of trace amounts of silver(I) and cadmium(II)

The reaction of silver(I) and cadmium(II) with 1,10-phenanthroline (PHEN) and Eosin (2,4,5,7-tetrabromofluorescein) gives coloured association complexes. The solution spectra of the mixed-ligand complexes are characterised by high intensity (∈ ≈ 10⁴) metal-to-ligand charge-transfer bands at 540–555nm. The optimum conditions for the spectrophotometric determination of Ag(I) or Cd(II) have been established. A simple, sensitive and selective method was proposed for the determination of traces of the metal ions either in aqueous or organic media. In the presence of EDTA only aluminium and cyanide interfere.     

Spectrophotometric study of thiocyanato complexation of cobalt(II) and nickel(II) ions in micellar solutions of a nonionic surfactant triton X-100

Complexation of cobalt(II) and nickel(II) with thiocyanate ions has been studied by precise spectrophotometry in aqueous and micellar solutions of a nonionic surfactant Triton X-100 of varying concentrations (20–100 mmol-dm^–3). With regard to cobalt(II), the formation of [Co(NCS)]⁺, [Co(NCS)₂], and [Co(NCS)₄]^2– was established. The formation constant of [Co(NCS)₄]^2–, is increased with increasing concentration of the surfactant, suggesting that the [Co(NCS)₄]^2– complex is formed in micelles. In contrast, the formation constants of [Co(NCS)]⁺ and [Co(NCS)₂] are remained practically unchanged. On the other hand, with nickel(II), the formation of sole [Ni(NCS)]⁺ and [Ni(NCS)₂] was established in both aqueous and micellar solutions examined, their formation constants being also remained unchanged. Interestingly, no higher complex was confirmed in the nickel(II) system, unlike cobalt(II). The unusual affinity of the [Co(NCS)₄]^2– complex with micelles will be discussed from thermodynamic and structural points of view.     

Spectrophotometric determination of microamounts of quercetin based on its complexation with copper(II)

The complexation process of the transition metal Cu(II) with quercetin was studied. The investigation was conducted spectrophotometrically in ethanol at the maximum absorption wavelength of 458.5 nm. Cu(II)—quercetin complex composition (1: 1) was determined using the Job, Harvey—Manning, and mole ratio methods. Complex stability constant was calculated by the Job and mole ratio methods and the respective logarithm values were 7.53 ± 0.25 and 7.44 ± 0.03. A new method for quantitative determination of the quercetin content in solution was developed in this work. At the optimal conditions quercetin was determined in concentrations ranging from 0.202 to 1.006 μg cm⁻³ with relative standard error of 2.5 % to 5.5 %. The lower detection limit was 0.067 μg cm⁻³. The method was found very accurate, reproducible, and sensitive, capable to determine microamounts of quercetin in pharmaceutical preparations.     

Spectrophotometric determination of copper(II) with carbon disulfide,a secondary amine and triton X-100

Copper(II) is determined by non-extractive spectrophotometry as a complex of butylene dithiocarbamate formed in situ by reaction between carbon disulfide and pyrrolidine in aqueous Triton X-100 medium. This method is similar to that with butylene dithiocarbamate as starting material in the sense of simplicity, sensitivity, precision and accuracy. Pyrrolidine is the best of seven secondary amines tested in this way for copper determinations.     

Nephelometric determination of germanium(IV) witho-phenanthroline and bromopyrogallol red in the presence of triton X-100

The light scattering of germanium(IV) witho-phenanthroline [phen] and bromopyrogallol red [BPR] in the presence of Triton X-100 has been studied. The ternary complex shows a constant light scattering intensity in an acidic medium (0.02 mol/l HCl+0.02 mol/l H₃PO₄). The maximum wavelength was 332 nm. The calibration graph is linear in the range 0.03–10 g/25 ml for Ge(IV). The detection limit is 0.03 g/25 ml. The composition of the ternary complex is GephenBPR = 122. The effects of diverse ions on the determination of Ge(IV) were examined. This simple method with high sensitivity can be successfully applied to the determination of Ge(IV) in coal fly ash, with a relative standard deviation of 2%.     

Spectrophotometric and first-derivative spectrophotometric determination of cadmium witho-hydroxybenzenediazoaminoazobenzene (HDAA)

The synthesis ofo-hydroxybenzenediazoaminoazobenzene (HDAA) is described. Cadmium forms with HDAA in the presence of Triton X-100 a 13 complex, which gives a maximum absorption at 520nm with an apparent molar absorptivity of 1.97 × 10⁵1 · mol^–1 · cm^–1 in pH 10 borax buffer solution and 1.52 × 10⁵1 · mol^–1 · cm^–1 in ammoniacal medium. In both media, Beer's law is followed in the range of 0 –10 g of cadmium in 25ml of solution and the coefficients of variation do not exceed 1.5%. A derivative method has been employed to determine cadmium in certain waste water samples without separation.     

Indirect complexometric determination of cadmium(II) using 1,10-phenanthroline as selective masking agent

An indirect complexometric method is described for the determination of cadmium(II), 1,10-phenanthroline being used as masking agent. Cadmium(II) in a given sample solution is initially complexed with an excess of EDTA and the surplus EDTA is titrated with lead nitrate solution at pH 5.0–6.0 (hexamine), using xylenol orange as indicator. An excess of 1,10-phenanthroline is then added and the EDTA released from the Cd-EDTA complex is titrated with standard lead nitrate solution. Results are obtained for 1.5–57 mg of Cd with relative errors 0.90% and standard deviations 0.06 mg. Cu(II), Co(II), Hg(II), Ni(II), Zn(II), Pd(II), Tl(III), Au(III) and Sn(IV) interfere, but can be easily masked. The method is applied for the determination of cadmium in synthetic alloy solutions.     

Cd(II) determination in the presence of aqueous micellar solutions

The equilibrium constants and molar absorptivities for the fast formation of a 1:3 complex between cadmium(II) (Cd(II)) and dithizonate anion, in the presence of cationic and non-ionic surfactants, allowed a simple and fast spectrophotometric determination of total cadmium. Indeed, the molar absorptivities of the Cd(II)-dithizone (Dz) complex formed in the presence of the neutral Triton X-100 and cationic cetyltrimethylammonium bromide (CTAB) surfactants are almost twice the value observed in the standard method and the maxima of absorption are shifted by about 40 nm when compared with the standard method. Clearly, the use of neutral and cationic surfactants promotes a higher value of the molar absorptivities of the complex, resulting in an increase in the sensitivity of the method. Application of the method to the desorption of Cd(II) ions from clays is illustrated.     

Spectrophotometric determination of vanadium(IV) in the presence of vanadium(V) using Br-PADAP

In the present paper, a simple and sensitive method is proposed for vanadium(IV) determination in the presence of vanadium(V). This is based on the oxidation of vanadium(IV) present in the sample to vanadium(V) by addition of iron(III) cation, followed by a complexation reaction of iron(II) with the spectrophotometric reagent 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (Br-PADAP). The iron(II) reacts with Br-PADAP immediately, forming a stable complex with a large molar absorptivity. The vanadium(IV) determination is possible, with a calibration sensitivity of 0.549 g ml^–1, for an analytical curve of 18.8 ng ml^–1 to 2.40 g ml^–1, molar absorptivity of 2.80 × 10⁴ 1 mole^–1 cm^–1 and a detection limit of 5.5 ng ml^–1. Selectivity was increased with the use of EDTA as a masking agent. The proposed method was applied for the vanadium(IV) determination in the presence of several amounts of vanadium(V). The results revealed that 200 g of vanadium(V) do not interfere with determination of 5.00 g of vanadium(IV). The precision and the accuracy obtained were satisfactory (R. S. D.<2%).     

Spectrophotometric and derivative spectrophotometric determination of palladium(II) using pyridopyridazine dithione in the presence of non-ionic surfactant

Pyridopyridazine dithione (PPD) was synthesized as a new sensitive and selective reagent for spectrophotometric and derivative spectrophotometric determination of palladium(II). In aqueous and micellar medium, PPD forms 1:4 complexes having molar absorptivities of 4.68 × 10⁴ and 5.74 × 10⁴lmol^–1 cm^–1 at 570 and 615 nm, respectively. Beer's law was obeyed up to 2.2 and 2.5 g ml^–1 with detection limits of 0.2 and 0.1g ml^–1. The relative standard deviations for 1.23g ml^–1 were 2.6 and 1.3%, in the absence and presence of Triton X-100. In fourth-derivative mode, the regression equation, linear range, detection limit and RSD for 0.075 g ml^–1 wereD ₄ = 4.3C + 1.5 × 10^–3, 0.013 – 0.23 g ml^–1, 3.7 ng ml–1 and 0.78%, respectively. The ionization constants of the reagent and stability constants of the complexes were evaluated. The method is free from interference by most common metal ions and anions. The method was applied for determination of palladium in activated charcoal.     

Spectrophotometric determination of trace amounts of uranium(VI) in water samples after mixed micelle-mediated extraction

A cloud point extraction process using mixed micelle of the cationic surfactant CTAB and non-ionic surfactant TritonX-114 to extract uranium(VI) from aqueous solutions was investigated. The method is based on the color reaction of uranium with pyrocatechol violet in the presence of potassium iodide in hexamethylenetetramine buffer media and mixed micelle-mediated extraction of complex. The optimal extraction and reaction conditions (e.g. surfactant concentration, reagent concentration, effect of time) were studied and the analytical characteristics of the method (e.g. limit of detection, linear range, preconcentration, and improvement factors) were obtained. Linearity was obeyed in the range of 0.20-10.00 ng mL⁻¹ of uranium(VI) ion and the detection limit of the method is 0.06 ng mL⁻¹. The interference effect of some anions and cations was also tested. The method was applied to the determination of uranium(VI) in tap water, waste-water and well water samples.     

Spectrophotometric determination of Fe(III) with tiron in the presence of cationic surfactant and its application for the determination of iron in Al-alloys and Cu-based alloys

A sensitive Spectrophotometric method for the determination of iron with tiron and a cationic surfactant, cetylpyridinium chloride, at pH 5.6 is reported. The complex is extracted into a chloroform-propan-2-ol (41) mixture and shows maximum absorbance at 520 nm. Beer's law is obeyed in the range 1–14 g/ml with an average molar absorptivity of 15800 l mol^–1 cm^–1. The molar ratio as determined by Job's method for Fe:tiron:CPC is 143. Interferences by various ions are examined. Zr, Ti and Mo interfere heavily. The method is applied for the determination of iron in Al-based and Cu-based alloys, using appropriate masking agents.     

Spectrophotometric determination of cobalt(II) in the presence of large amounts of iron with salicylaldehyde thiosemicarbazone

Cobalt(II) reacts instantaneously with the reagent at pH 5.0. The yellow complex has a molar absorptivity of 1.1 × 10⁴ 1 mol^?1 cm^?1. The method is applied to the determination of cobalt in steels after removal of iron with phosphate.     

Determination of Cd(II) in Some Foodstuffs by Anodic Stripping Pulse Voltammetry (ASPV) using Glassy Carbon Electrode

Abstract

Cadmium in the presence of 0.04 M NaCl as the electrolyte was determined using stripping voltammetry with superimposed constant amplitude pulses of negative polarity (SVPNP) or positive polarity (SVPPP), and differential pulses stripping voltammetry using rotating disc glass carbon electrode (RDGCE). The SVPNP was found to give the greatest sensitivity. The anodic peak was obtained at potential ?850 to ?795 mV due to the oxidation of cadmium to cadmium(II). Linear calibration curves were obtained in the concentration range between 1.5×10^?9–2×10^?10 M. The relative standard deviation is 4.25% at very low concentration of 2×10^?10 M. This method was successfully applied to the determination of cadmium in some foodstuffs (wheat and its products, vegetables) after acid digestion.