负载金属催化剂Ir(γ-Al2O3)对阿维菌素选择加氢反应研究

分别采用氢气、NaBH₄、醇水混合溶剂还原, PVP(聚乙烯吡咯烷酮)保护和微乳液法制备了γ-Al₂O₃负载的Ir金属催化剂, 通过XPS、XRD、TEM对催化剂的结构进行了表征, 考察了催化剂对阿维菌素选择加氢制备伊维菌素的性能, 探讨了催化剂制备方法对催化剂活性和选择性的影响. 实验结果表明, 在不同金属催化剂Ru/γ-Al₂O₃、Pd/γ-Al₂O₃、Pt/γ-Al₂O₃、Ir/γ-Al₂O₃中, Ir/γ-Al₂O₃的活性和选择性最好. 用PVP保护的Ir/γ-Al₂O₃, 其催化活性和选择性比没有PVP保护的催化剂有显著提高; 采用微乳液法制备的Ir/γ-Al₂O₃催化剂显示出最好的活性, 但反应选择性比PVP保护的催化剂差.     

The remarkable enhancement of CO-pretreated CuO-Mn2O3/γ-Al2O3 supported catalyst for the reduction of NO with CO: the formation of surface synergetic oxygen vacancy

NO reduction by CO was investigated over CuO/γ-Al2O3, Mn2O3/γ-Al2O3, and CuOMn2O3/γ-Al2O3 model catalysts before and after CO pretreatment at 300 °C. The CO-pretreated CuO-Mn2O3/γ-Al2O3 catalyst exhibited higher catalytic activity than did the other catalysts. Based on X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV/Vis diffuse reflectance spectroscopy (DRS), Raman, and H2-temperature-programmed reduction (TPR) results, as well as our previous studies, the possible interaction model between dispersed copper and manganese oxide species as well as γ-Al2O3 surface has been proposed. In this model, Cu and Mn ions occupied the octahedral vacant sites of γ-Al2O3, with the capping oxygen on top of the metal ions to keep the charge conservation. For the fresh CuO/γ-Al2O3 and Mn2O3/γ-Al2O3 catalysts, the -Cu-O-Cu- and -Mn-O-Mn- species were formed on the surface of γ-Al2O3, respectively; but for the fresh CuO-Mn2O3/γ-Al2O3 catalyst, -Cu-O-Mn- species existed on the surface of -Al2O3. After CO pretreatment, -Cu-□-Cu- and -Mn-□-Mn- (□ represents surface oxygen vacancy (SOV)) species would be formed in CO-pretreated CuO/γ-Al2O3 and CO-pretreated Mn2O3/γ-Al2O3 catalysts, respectively; whereas -Cu-□-Mn- species existed in CO-pretreated CuO-Mn2O3/γ-Al2O3. Herein, a new concept, surface synergetic oxygen vacancy (SSOV), which describes the oxygen vacancy formed between the individual Mn and Cu ions, is proposed for CO-pretreated CuO-Mn2O3/γ-Al2O3 catalyst. In addition, the role of SSOV has also been approached by NO temperature-programmed desorption (TPD) and in situ FTIR experiments. The FTIR results of competitive adsorption between NO and CO on all the CO-pretreated CuO/γ-Al2O3, Mn2O3/γ-Al2O3, and CuO-Mn2O3/γ-Al2O3 samples demonstrated that NO molecules mainly were adsorbed on Mn2+ and CO mainly on Cu+ sites. The current study suggests that the properties of the SSOVs in CO-pretreated CuO-Mn2O3/γ-Al2O3 catalyst were significantly different to SOVs formed in CO-pretreated CuO/γ-Al2O3 and Mn2O3/γ-Al2O3 catalysts, and the SSOVs played an important role in NO reduction by CO.     

Bowl-shaped poly(3,4-ethylenedioxythiophene)/γ-Fe2O3 composites with elecromagnetic function

In this paper, electromagnetic poly(3,4-ethylenedioxythiophene)/γ-Fe2O3 (PEDOT/γ-Fe2O3 ) micro-bowls, 1 2 μm in diameter, were prepared by a simple environment-friendly process. In this method, the aqueous solution of cetyltrimethylammonium bromide (CTAB) instead of any organic solvent was used. FeCl3 acted as a source of Fe Ⅲ for the formation of γ-Fe2O3 and as an oxidant for the polymerization of 3,4-ethylenedioxythiophene (EDOT). The bowl-shaped morphology of PEDOT/γ-Fe2O3 composites was strongly influenced by the concentration of CTAB, FeCl2 , ammonia solution and the reaction temperature. The saturation magnetization of PEDOT/γ-Fe2O3 micro-bowls increased with the increase of FeCl2 concentration and reached 6.20 Am2 /kg at the FeCl2 concentration of 0.30 mol/L. The conductivity of the PEDOT/γ-Fe2O3 composites was in the range of 101 S/cm. The electrical and magnetic sources of PEDOT/γ-Fe2O3 micro-bowls were confirmed by SEM-EDX, TEM, XRD and XPS spectra. And the possible formation mechanism of PEDOT//γ-Fe2O3 was proposed.     

Theoretical studies of the reactions of O(~3p) with halogenated methyl (Ⅰ)——Reaction mechanism of the O(~3p) CH_2Cl reaction

The reaction of O(~3P) with CH_2Cl radical has been studied using ab initio molecular orbital theory. G2 (MP2) method is used to calculate the geometrical parameters, vibrational frequencies and energies of various stationary points on the potential energy surface. The reaction mechanism is revealed. The addition of O(~3P) with CH_2Cl leads to the formation of an energy rich intermediate OCH_2Cl which can subsequently undergo decomposition or isomerization to the final products. The calculated heat of reaction for each channel is in agreement with the experimental value. The production of H CHClO and Cl CH_2O are predicted to be the major channels. The overall rate constants are calculated using transition state theory on the basis of ab initio data. The rate constant is pressure independent and exhibits negative temperature dependence at lower temperatures, in accordance with the experimental results.     

Effect of synthesis solution pH of Co/γ-Al_2O_3 catalyst on its catalytic properties for methane conversion to syngas

The cobalt nanoparticles over γ-Al_2O_3 support were prepared via chemical reduction of CoCl_2·6H_2O using NaBH_4 with various values of pH in the range of 11. 92-13. 80. Synthesized catalysts were studied through X-ray diffraction( XRD),N_2 adsorption/desorption( BET),H_2-temperature programmed reduction( H_2-TPR),H_2-chemisorption,O_2 pulse titration and temperature programmed oxidation( TPO) methods. Obtained results exhibited the synthesis solution pH showed a significant influence on the activity and selectivity in partial oxidation of methane reaction. The methane conversion,CO selectivity and H_2 yield were enhanced by increasing of the synthesis solution pH. Compared to other catalysts,the catalyst that synthesized at pH of 13.80,showed a superior ability in syngas production with a H_2/CO ratio of near 2 and also a proper stability against deactivation during the partial oxidation of methane.     

Complex formation between Ru(η(6)-p-cym)(H2O)3]2+ and (O,O) donor ligands with biological relevance in aqueous solution

The interaction between [Ru(η(6)-p-cym)(H(2)O)(3)](2+) and (O,O) type chelators with different basicity of the donor atoms was studied using combined pH-potentiometric, (1)H-NMR and ESI-TOF-MS techniques. The studied nine ligands are building blocks of reported complexes with antitumor activity or may model (O,O) donor serum components capable of interacting with the administered half-sandwich ruthenium(II) type drug. Composition and stability constants of the [Ru(η(6)-p-cym)(O,O)Y] type species (Y: H(2)O or OH(-)) were determined (T = 25.0 °C; I = 0.20 M (KCl)) and the metal ion binding strengths of the ligands are discussed. It was found that ligands with two low basicity O donors (oxalic and cyclobutane-1,1-dicarboxylic acid) bind the metal ion at acidic conditions but are not able to prevent the hydrolysis at physiologically relevant conditions. Ligands with one low and one high basicity O donor (lactic and salicylic acid) are weak binders for Ru(η(6)-p-cym)(H(2)O)(3)](2+). Pyrone or pyridinone based ligands are capable of binding the metal ion over a wide pH range and no hydrolysis product is detectable at pH = 7.4. The obtained speciation models may help in the rationalization of the biological activity of such complexes and provide a deeper insight into the solution behaviour of half-sandwich Ru(II) complexes with potential anticancer activity.     

混合配合物[Cu~0~.~5Mn~0~.~5(phen)~2Cl]OH.3H~2O的合成与晶 体结构

报道了混合配合物[Cu~0~.~5Mn~0~.~5(phen)~2Cl]OH.3H~2O的合成、表征和晶体结构分析。该晶体属单斜晶系,具有C2/c空间群,a=2.3321(5),b=3.0295(6),c=0.7492(1)nm,β=97.85(3)ⅲ,V=5.244(3)nm^3,Z=8,Dc=1.516g/cm^3,F(000)=1244,R=0.066,Rw=0.068。该化合物含[Cu(phen)~2Cl]^+和[Mn(phen)~2Cl]^+阳离子,它们以金属离子各50%的几率在晶胞中无序排列。晶胞中分两层排布8个这样的阳离子单元;水分子和OH^-离子分布其中。     

Hexacoordinate oxy-globin models Fe(Por)(NH3)(O2) react with NO to form only the nitrato analogs Fe(Por)(NH3)(η1-ONO2), even at ~100 K

The oxy-globin models Fe(Por)(NH(3))(O(2)), prepared by sequential reactions of O(2) ((18)O(2)) and NH(3) with thin porous layers of Fe(II)(Por), react with NO ((15)NO) at 80-100 K to form only the low-spin nitrato complexes Fe(Por)(NH(3))(η(1)-ONO(2)), thus implying that peroxynitrite intermediates, if formed, must undergo very facile isomerization to the nitrato analog.     

Optimization study by Box-Behnken design (BBD) and mechanistic insight of CO2 methanation over Ru-Fe-Ce/γ-Al2O3 catalyst by in-situ FTIR technique

The utilization of carbon dioxide for methanization reactions in the production of synthetic natural gas (SNG) is of increasing interest in energy-related issues. The use of CO₂ as a raw material in methanization reactions in the formation of SNG is of increasing concern associated with energy problems. The effect of three independent process parameters (calcination temperature, ceria loading and catalyst dosage) and their interactions in terms of conversion of CO₂ was considered by response surface methodology (RSM). Box-Behnken design (BBD) revealed that the optimized parameters were 1000 °C calcination temperature, 85%wt ceria loading and 10 g catalyst dosage, which resulted in 100% conversion of CO₂ and 93.5% of CH₄ formation. Reaction intermediate study by in situ FTIR showed that carboxylate species was the most active species on the catalyst surface. In-situ FTIR experiments revealed a weak CO₂ adsorption, that exist namely as carboxylate species over the trimetallic catalyst. As a result, dissociated hydrogen over ruthenium reacts with surface carbon, leading to *CH, which subsequently hydrogenated to produce *CH₂, *CH₃ and finally to the desired product methane. The use of in situ-FTIR study indicated that the CO₂ methanation mechanism does not involve CO as a reaction intermediate. The more detailed mechanism of CO₂ methanation pathways involved over Ru-Fe-Ce/γ-Al₂O₃ catalyst is discussed in accordance with IR-spectroscopic data. The better catalytic activity and stability over Ru-Fe-Ce (5:10:85)/γ-Al₂O₃ catalyst calcined at 1000 °C showed the presence of moderate basic sites for CO₂ adsorption.     

Effect of cobalt precursors on the dispersion, reduction, and CO oxidation of CoO(x)/γ-Al2O3 catalysts calcined in N2

The present work tentatively investigated the effect of cobalt precursors (cobalt acetate and cobalt nitrate) on the physicochemical properties of CoO(x)/γ-Al(2)O(3) catalysts calcined in N(2). XRD, Raman, XPS, FTIR, and UV-vis DRS results suggested that CoO/γ-Al(2)O(3) was obtained from cobalt acetate precursors and CoO was dispersed on γ-Al(2)O(3) below its dispersion capacity of 1.50 mmol/(100 m(2) γ-Al(2)O(3)), whereas Co(3)O(4)/γ-Al(2)O(3) was obtained from cobalt nitrate precursors and Co(3)O(4) preferred to agglomerate above the dispersion capacity of 0.15 mmol/(100m(2) γ-Al(2)O(3)). Compared with Co(3)O(4)/γ-Al(2)O(3), CoO/γ-Al(2)O(3) catalysts were difficult to be reduced and easy to desorb oxygen species at low temperatures and presented high activities for CO oxidation as proved by H(2)-TPR, O(2)-TPD, and CO oxidation model reaction results. A surface incorporation model was proposed to explain the dispersion and reduction properties of CoO/γ-Al(2)O(3) catalysts.     

γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres: Preparation, formation mechanism, magnetic property, and application in water treatment

In this paper, we report the preparation of γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres by a solvothermal combined with precursor thermal conversion method. These γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres were constructed by three-dimensional self-assembly of nanosheets, forming porous nanostructures. The effects of experimental parameters including molar ratio of reactants and reaction temperature on the precursors were studied. The time-dependent experiments indicated that the Ostwald ripening was responsible for the formation of the hierarchically nanostructured hollow microspheres of the precursors. γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres were obtained by the thermal transformation of the precursor hollow microspheres. Both γ-Fe(2)O(3) and Fe(3)O(4) hierarchically nanostructured hollow microspheres exhibited a superparamagnetic property at room temperature and had the saturation magnetization of 44.2 and 55.4emu/g, respectively, in the applied magnetic field of 20 KOe. Several kinds of organic pollutants including salicylic acid (SA), methylene blue (MB), and basic fuchsin (BF) were chosen as the model water pollutants to evaluate the removal abilities of γ-Fe(2)O(3) and Fe(3)O(4) magnetic hierarchically nanostructured hollow microspheres. It was found that γ-Fe(2)O(3) hierarchically nanostructured hollow microspheres showed a better adsorption ability over SA than MB and BF. However, Fe(3)O(4) hierarchically nanostructured hollow microspheres had the best performance for adsorbing MB.     

Is it homogeneous or heterogeneous catalysis? Identification of bulk ruthenium metal as the true catalyst in benzene hydrogenations starting with the monometallic precursor,Ru(II)(eta 6-C6Me6)(OAc)2, plus kinetic characterization of the heterogeneous nucleation,then autocatalytic surface-growth mechanism of metal film formation

A reinvestigation of the true catalyst in a benzene hydrogenation system beginning with Ru(II)(eta(6)-C(6)Me(6))(OAc)(2) as the precatalyst is reported. The key observations leading to the conclusion that the true catalyst is bulk ruthenium metal particles, and not a homogeneous metal complex or a soluble nanocluster, are as follows: (i) the catalytic benzene hydrogenation reaction follows the nucleation (A --> B) and then autocatalytic surface-growth (A + B --> 2B) sigmoidal kinetics and mechanism recently elucidated for metal(0) formation from homogeneous precatalysts; (ii) bulk ruthenium metal forms during the hydrogenation; (iii) the bulk ruthenium metal is shown to have sufficient activity to account for all the observed activity; (iv) the filtrate from the product solution is inactive until further bulk metal is formed; (v) the addition of Hg(0), a known heterogeneous catalyst poison, completely inhibits further catalysis; and (vi) transmission electron microscopy fails to detect nanoclusters under conditions where they are otherwise routinely detected. Overall, the studies presented herein call into question any claim of homogeneous benzene hydrogenation with a Ru(arene) precatalyst. An additional, important finding is that the A --> B, then A + B --> 2B kinetic scheme previously elucidated for soluble nanocluster homogeneous nucleation and autocatalytic surface growth (Widegren, J. A.; Aiken, J. D., III; Ozkar, S.; Finke, R. G. Chem. Mater. 2001, 13, 312-324, and ref 8 therein) also quantitatively accounts for the formation of bulk metal via heterogeneous nucleation then autocatalytic surface growth. This is significant for three reasons: (i) quantitative kinetic studies of metal film formation from soluble precursors or chemical vapor deposition are rare; (ii) a clear demonstration of such A --> B, then A + B --> 2B kinetics, in which both the induction period and the autocatalysis are continuously monitored and then quantitatively accounted for, has not been previously demonstrated for metal thin-film formation; yet (iii) all the mechanistic insights from the soluble nanocluster system (op. cit.) should be applicable to metal thin-film formations which exhibit sigmoidal kinetics and, hence, the A --> B, then A + B --> 2B mechanism.     

Ni(II) complexes with pyrazole-derived ligands. Crystal structures of [Ni(HL0)2ClH2O][Ni(HL0)2(H2O)2]Cl3·CH3OH·H2O and [Ni(HL1)2(H2O)2]Br2·2.5DMF (HL0=3-phenyl-5-(2-pyridyl)pyrazole and HL1=3-phenyl-5-(6-methyl-(2-pyridyl))pyrazole

The reaction of 3-phenyl-5-(2-pyridyl)pyrazole (HL⁰) and 3-phenyl-5-(6-methyl-(2-pyridyl))pyrazole (HL¹) with nickel(II) salts produces mononuclear coordination compounds. The new complexes have been characterised by elemental analyses, conductivity measurements and infrared and electronic spectroscopies.Two different forms of mononuclear nickel(II) complexes have been prepared and structurally characterised by X-ray crystallography: [Ni(HL⁰)₂Cl(H₂O)][Ni(HL⁰)₂(H₂O)₂]Cl₃·CH₃OH·H₂O and [Ni(HL¹)₂(H₂O)₂]Br₂·2.5DMF. In the cationic complexes, the coordination of the Ni(II) is octahedral with two bidentate HL⁰ or HL¹ neutral ligands in a cis disposition. The degree of distortion from regular octahedral geometry is compared to closely related structures. In the solid state, cations and anions are bonded by hydrogen bonding.     

Oxidation of carbon monoxide catalyzed by Pd(α,α-bipy)Cl2—CuCl2—C3F7COOH/γ-Al2O3: oscillations in the flow reactor

Russian Chemical Bulletin -     

{[(μ_2—Cl)(C_5H_5)Sm(μ_2—Cl)]_2(μ_3—Cl](μ_4—O)Sm(μ_2—Cl)THF}_2~(2-)·[Li(DME)_2·Li(THF)_2DME]~(2+)·DME的晶体结构

1977年,Bradley等人报道了稀土离子间以双氧离子(O_2~(2-))为桥的稀土金属有机配合物的合成及其晶体结构,类似的稀土离子间夹有氧离子(O~(2-))的金属有机配合物也相继有些报道,但本文提出的含有六个Sm~(3+)夹有两个氧离子的簇状配合物则未见报道。     

Synthesis and structural characterisation of five copper(I) and silver(I) complexes with 2-aminopyridine (2-APy), [Cu(μ-Cl)(2-Apy)(PPh3)]2, [Ag(μ-X)(2-Apy)(PPh3)]2 (X = Cl,Br), [Ag(μ-ONO2)(2-Apy)(EPh3)]2 (E = P,As)

Five new copper(I)/silver(I) complexes containing 2-aminopyridine, [Cu(μ-Cl)(2-Apy)(PPh₃)]₂(1), [Ag(μ-Cl)(2-Apy)(PPh₃)]₂(2), [Ag(μ-Br)(2-Apy)PPh₃)]₂(3), [Ag(μ-ONO₂)(2-Apy)(PPh₃)]₂(4), [Ag(μ-ONO₂)(2-Apy)(AsPh₃)]₂(5) have been synthesised for the first time. Complexes 1–5 are obtained by the reactions of MX (MX = CuCl for 1; M = Ag for 2–5; X = Cl, Br for 2–3; X = NO₃ for 4–5) with the monodentate ligands EPh₃ (E = P for 1–4; E = As for 5) and 2-Apy in the molar ratio of 1:1:2 in the mixed solvent of CH₂Cl₂ and MeOH. Complexes 1–5 are characterised by IR and X-ray diffraction. In 1–5, chloride, bromide and nitrate ions bridge two metal atoms to form dinuclear complexes containing the parallelogram cores M₂X₂ (M = Cu, Ag).     

Kinetics and mechanism of the substitution reactions of some monofunctional Pt(II) complexes with heterocyclic nitrogen donor molecules. Crystal structure of [Pt(bpma)(pzBr)]Cl2·2H2O

Substitution reactions of [Pt(terpy)Cl]⁺ (terpy = 2,2′;6′,2′′-terpyridine), [Pt(bpma)Cl]⁺ (bpma = bis(2-pyridylmethyl)amine), [Pt(dien)Cl]⁺ (dien = diethylenetriamine or 1,5-diamino-3-azapentane) and [Pt(tpdm)Cl]⁺ (tpdm = tripyridinedimethane) with nitrogen donor heterocyclic molecules, such as 3-amino-4-iodo-pyrazole (pzI), 5-amino-4-bromo-3-methyl-pyrazole (pzBr) and imidazole (Im), were studied in aqueous 0.10 M NaClO₄ in the presence of 10 mM NaCl using variable-temperature UV–vis spectrophotometry. The second-order rate constants k₂ indicate decrease in reactivity in the order [Pt(terpy)Cl]⁺ > [Pt(bpma)Cl]⁺ > [Pt(tpdm)Cl]⁺ > [Pt(dien)Cl]⁺. The most reactive nucleophile among the heterocyclic compounds is imidazole, while pzI shows slightly higher reactivity than pzBr. Activation parameters were also determined and the negative values for entropies of activation, ΔS^≠, support an associative mode of substitution for all substitution processes. Crystal structure of [Pt(bpma)(pzBr)]Cl₂·2H₂O was determined by single-crystal X-ray analysis. The coordination geometry of the complex is distorted square-planar while the bond distance Pt–N2(pzBr) is longer than the other three Pt–N distances.     

Comparison of the Activities of Pd(0) and Pd(I) in Low-Temperature Oxidation of Carbon Monoxide on the Pd/γ-Al2O3 Catalyst

Kinetics and Catalysis - Low-temperature oxidation of carbon monoxide on the Pd/γ-Al2O3 catalyst has been studied at room temperature and atmospheric pressure of air containing 100 mg/m3 CO....     

Ready formation of phosphonate complexes of rhodium and iridium from [M(P(OMe3)5]Cl compounds (M = Rh,Ir). Differences between reactions of dihydrogen with [Mp(O)(OMe)2(P(OMe)3)4] complexes (M = Co,Rh, Ir), including facile hydrogenolysis of a rhodiumphosphorus bond

The ease of formation of the phosphonate complexes [M(P(O)(OMe)₂(P(OMe)₃)₄] (M = Rh, Ir), from the pentakis-trimethylphosphite complexes [M(P(OMe)₃)₅]Cl is reported. Differences in the interaction of H₂ with the complexes [M′(P(O)(OMe)₂(P(OMe)₃)₄), (M′ = Co, Rh, Ir) are presented and discussed.