On the use of a dead-time meter for pile-up corrections

Correction for pile-up losses in the amplifier is possible by the dead-time fraction indicator of the ADC in case of long-lived radionuclides. If the dead-time meter has been calibrated, an accuracy of 1.5% is feasible up to a dead-time fraction of 25%. The precision decreases from 1.5% at 10% dead-time fraction to 3% at a deadtime fraction of 30%.     

Investigation of surface phenomena on solid catalysts by thermogravimetry

Thermogravimetry was applied to the investigation of the phenomena of adsorption, chemisorption, desorption and surface reactions on solid catalysts. The measurements were carried out with 13 NaX and NaY type zeolites and with silica gels treated with sodium hydroxide, in the presence of cumene and methanol. On the basis of the quantitative results it is possible to give an interpretation of surface phenomena and to establish the existence of various active centres on the surface of the catalysts.

---

Zusammenfassung Adsorptions-, Chemisorptions- und Desorptionserscheinungen, sowie Oberflächenreaktionen an festen Katalysatoren wurden thermogravimetrisch untersucht. Die Messungen wurden an Zeoliten der Typen 13 NaX und NaY und an mit Natriumhydroxid behandelten Silikagelen in Gegenwart von Cumol und Methanol durchgeführt. Aufgrund der quantitativen Ergebnisse war es möglich, die Oberflächenerscheinungen zu deuten und das Vorhandensein von verschiedenen aktiven Zentren an der Katalysatoroberfläche nachzuweisen.

---

Résumé On a appliqué la méthode thermogravimétrique à l'étude des phénomènes d'adsorption, de chemisorption et de désorption ainsi qu'aux réactions de surface sur des catalyseurs solides. Les mesures ont été effectuées sur zéolites de type 13 NaX et NaY et sur des silicagels traités par la soude en présence de cumène et de méthanol. Des résultats quantitatifs permettent de donner une interprétation des phénomènes de surface et d'établir l'existence de divers centres actifs à la surface des catalyseurs.

---

, , , . , , , , . 13 NaX NaY , . .

---

---

The authors express their gratitude to Prof. S. Malinowski for help and discussion and to Mr. W. Dziklinski for his technical help.     

Kinetics of solid polypropylene oxidation inhibited by aromatic nitrons

C-phenylcarbamoyl-N-phenylnitron and C(2,4-di-tert-butyl-3-hydroxyphenylcarbamoyl)-N-(p-di-methylaminophenyl) nitron inhibit the oxidation of solid polypropylene. In this case the nitrons studied demonstrate properties of polyfunctional inhibitors: they interrupt oxidation chains by chains by reactions with alkyl and peroxyl radicals.

---

C--N- C-(2,4----3-)-N-(-) . , .

     

Correlation between acid strength (Ho) and ammonia desorption temperature for aluminas and silica-aluminas

Correlation between the temperature at which a base is desorbed and the acid strength (H_o) of the sites set free by it, was looked for. Ammonia was employed as base. A linear correlation of the type H_o=+/T (K) is valid with and constants, dependent on the adsorbate and the adsorbent.

---

(H_o) , . H_o=+/T (K), .

     

Hole Burning and Fluorescence Spectra of Sol-Gel Derived Sm2+-Doped Glasses

Sm2+-doped glasses in the system of Al2O3-SiO2 were prepared by sol-gel processing of metal alkoxides and reacting with H2 gas at 800°C. The hole burning properties of these glasses were investigated. The holes were burned in the 7F0 5D0 line of the Sm2+ ions using a DCM dye laser at 77 K. The hole depth increased with increasing the laser irradiation time, reaching up to 15% of the total intensity within a few hundred seconds. The hole width was 3 cm–1 full width at half maximum. Fluorescence line narrowing spectra of the 5D0 7 F1 transition were analyzed to study the local structure surrounding the Sm2+ ion. It is concluded that the Sm2+ ions are closely coordinated with nine oxygens of the AlO6 group in aluminosilicate glasses and that the addition of Al3+ ions into glass induces an increase in the coordination number of the Sm2+.     

Non-Aqueous Capillary Electrophoresis with Indirect Photometric Detection for Direct Analysis of Pb2+, Zn2+ and Cd2+ Ions

A new approach, based on non-aqueous capillary electrophoresis separation and indirect photometric detection, was established for the determination of the transition metal ions Pb²⁺, Zn²⁺ and Cd²⁺. Under optimized conditions, the method produced baseline separation of these three metal ions. The linear range and detection limits were 1050µM, 1.9µM for Cd²⁺; 1050µM, 2.1µM for Zn²⁺; and 20100µM, 3.8µM for Pb²⁺, respectively.     

The determination of tin in explosive materials by thermal neutron activation analysis

A method, based on the measurement of the -photopeak at 332 keV arising from a¹²⁴Sn(n, )^125mSn reaction, has been developed for the rapid measurement of Sn at concentrations of 20 g g^–1, present as the cross-linking agent, in explosive charges. The method is comparative, and has a limit of detection of 0.6 g g^–1 and a precision of 5% RSD. The method requires no sample preparation and is economical in effort.     

Role of Water on Fast Proton Conduction in Sol-Gel Glasses

Fast proton-conducting P2O5-ZrO2-SiO2 glasses were prepared by sol-gel processing of metal alkoxides. Glasses heated to 150 to 400°C exhibited room temperature conductivities of 10–4 S/cm, larger by 2 order of magnitude than that of as-prepared gel, 3 × 10–7 S/cm at 30°C. The conductivity increased quadratically with the increasing product of proton and molecular water concentration. These high conductivities were regarded as fast proton transfer accelerated by molecular water bonded with the hydroxyl groups.     

Calorimetric studies of adsorptive properties of metallic carbides and nitrides of transition elements. Adsorption of H2, CO and O2 on titanium nitrides

Adsorption heats of hydrogen, oxygen and carbon monoxide on titanium nitrides have been measured calorimetrically in the temperature range from 473 to 673 K. With increasing Me/N ratio, the adsorption heat of oxygen grows.

---

, 473–673 . Me/N.

     

Preparation and Characterization of Germanium Sulfide Based Sol-Gel Planar Waveguides

Germanium sulfide based glass films have been deposited by spin-coating onto single crystal silicon wafers and silica glass disks, using the reaction between GeCl₄, either pure or doped with of 5 mol% of SbCl₃, dissolved in toluene, with H₂S. The films, heat-treated under different conditions, were characterized by X-ray diffraction, infrared spectroscopy, X-ray photoemission spectroscopy, mechanical profilometry and ellipsometry. Oxide contamination was found in these films, but this was reduced or even eliminated by a heat-treatment in H₂S gas, at 270°C. A maximum film thickness of 1.3 m was achieved and the refractive indices of the films were in the range of 1.9–2.8 at 633 nm. Propagated light was observed by butt-coupling, for waveguides deposited on silica glass disks, at = 633 nm. Optical losses in the range of 1.1–1.9 dB/cm were measured at this wavelength, for different regions of different planar waveguides. The present method has achieved reasonably low loss and low levels of oxide contamination, which are promising for active applications.     

Crystallization kinetics of LDPE/Ny6 blends

The crystallization behaviour of low density polyethylene/nylon 6 blends has been investigated as a function of the composition.The melting points of the polymers are almost uninfluenced by the presence of the other homopolymers except for blends with a nylon content of 75–90%.Blends with 10% nylon content do not exhibit the crystallization peak during the cooling step probably because of the low concentration and high viscosity of the low density polyethylene matrix.The crystallinity degree of the polyethylene is independent of the composition, while some variations are shown by the polyamide.Finally the rate of nucleation is strongly affected by the composition, in particular for the nylon phase.

---

Zusammenfassung Die Abhängigkeit des Kristallisationsverhaltens von 6 Polyethylen/Nylon-Gemischen geringer Dichte von der Zusammensetzung wurde untersucht. Der Schmelzpunkt eines jeden Polymers ist nahezu unbeeinflußt von der Anwesenheit des anderen Homopolymers ausgenommen die Gemische mit einem Nylongehalt von 75–90%. Die Gemische mit einem Gehalt von 10% Nylon zeigen während des Abkühlungsschrittes keinen Kristallisationspeak, was wahrscheinlich auf die niedrige Konzentration und auf die hohe Viskosität der Polyethylenmatrix mit geringer Dichte zurückzuführen ist. Der Kristallinitätsgrad des Polyethylens ist unabhängig von der Zusammensetzung, während ein Einfluß des Polyamids festzustellen ist. Die Keimbildungsgeschwindigkeit ist stark von der Zusammenstzung abhängig, was besonders für die Nylonphase gilt.

---

— 6 . , 75–90% , . 10% , , , . , . , , .

     

ESR studies of N2O interaction with photoinduced centers on ZnO and MgO

According to the analysis of the formation of O^– anion radicals stabilized on the surface of oxides, it has been shown that on ZnO, only O _s ^– hole centers are formed, whereas in the presence of N₂O molecules, besidese the above centers, MgO surface contains O _ads ^– electron centers.

---

- O^–, . , ZnO O _s ^– , MgO N₂O O _s ^– O ^– .

     

Gamma radiolysis of Methyl Red solution and reaction induced by γ-irradiated NaCl in Methyl Red

The -radiolysis of Methyl Red solution in HCl medium at pH=2 has been studied along with energy transfer reaction brought about byF and hole centers of -irradiated NaCl. The G-values for degradation of the azo dye indicator by radiolysis and -irradiated salt were determined as 9·10^–1 and 4.8·10^–3, respectively. The kinetic rate constants (k) of degradation are evaluated as 2·10^–5 rad^–1 in the case of direct radiolysis, while for the irradiated salt it is 2·10^–7 rad^–1. The extent of degradation by direct -radiolysis is 100–200 times greater as compared to that by the -irradiated salt. The same mechanism is proposed for radiolysis as well as the reaction induced by -irradiated sodium chloride.     

Strategies to vectorize conventional SCF-Cl algorithms

Recent high-performance computers, especially supercomputers, achieve very high-speed operations but bring about serious I/O problems in quantum chemical computations. Strategies to vectorize conventional SCF-CI algorithms are discussed relating to the I/O problems. The conventional SCF-CI algorithm which is proposed here reduces I/O processing by eliminating all sorting routines and redundant integral files and generates directly nonzero and nonredundant PK integrals with a vectorizable canonically-ordered list. The new implementation has been undertaken and successfully realized as a program system named GSCF3. The vector to scalar acceleration rate of GSCF3 on the HITAC S-810 are as follows: 2.5 5 in the AO integral evaluation, 5 12 in the SCF calculation, 15 30 in the four-index integral transformation, 10 20 in the CI matrix diagonalization, and overall 510 through SCF-CI.     

TEM and XPS studies of Ni/WS2 catalysts for thiophene hydrogenolysis

Differences in the structure of WS₂ samples with S_BET=7.6 and 75 m²/g are manifested in decreasing lengths of basal faces of some small crystallites in the more dispersed WS₂. This effect increases the relative fraction of lateral faces on the catalyst surface. Ni ions in the Ni/WS₂ catalysts are in an electrondeficient state compared to NiS.

---

WS₂ 7,6 ²/qg 75 ²/ WS₂. Ni Ni/WS₂ ( NiS) .

     

Effects of pH and Dye Concentration on the Optical and Structural Properties of Coumarin-4 Dye-Doped SiO2-PDMS Xerogels

Optical and structural properties of coumarin-4 dye-doped SiO₂-PDMS xerogels synthesized by acid catalyzed (one-step) and acid-base catalyzed (two-step) sol-gel routes with varying pH (0.6 to 7) and dye content ( 5 × 10^–4 to 5 × 10^–2 mole) are reported. Spectroscopic methods such as photo-luminescence, FT-IR and FT-Raman were used for characterizations. The acid catalyzed xerogels prepared with pH < 2.5 exhibited two fluorescence peaks, I at 390 nm and II at 480 nm. The acid-base catalyzed xerogels synthesized with pH < 2.5 also exhibited two peaks, I at 400 nm and II at 475 nm. Peak II was not observed for the samples with pH 2.5. This phenomenon was attributed to the existence of pH dependent different forms of coumarin-4 molecule. The concentration-quenching phenomenon was observed for the acid catalyzed xerogels prepared with different dye concentration. TheFT-IR spectra indicated the existence of hydrogen bonds between the carbonyl groups of dye molecules and the silanol groups of gel matrix. The hydrogen bonding was the highest for the samples with the extremity pH, 0.6 and 7, resulting in the highest dye/gel matrix interactions, hence, the highest fluorescence peaks. The Raman studies indicated that the samples prepared with pH < 2.5 possessed relatively more number of 3-membered siloxane rings than 4-membered siloxane rings. The ring statistics was reversed for the samples with pH > 2.5. The number of silanol groups was higher for the samples with pH > 2.5.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Modification of preparation technique for highly dispersed Ni/γ?Al2O3 catalysts

Highly dispersed Ni/–Al₂O₃ catalysts have been prepared by the method of double impregnation. The application of ethylenediaminetetraacetic acid (H₄Y) as a chelating agent for activation of the -Al₂O₃ support enables us to prepare highly dispersed Ni/Al₂O₃ catalysts. The use of this chelating agent according to the described modification of the impregnation technique results in the highest dispersity of the metal component in the catalysts obtained.

---

Ni/-Al₂O₃ . (H₄Y) -Al₂O₃ Ni/Al₂O₃ . , .

     

Oxidizing supported reagents, III. Oxidation of alcohols by new supported K2Cr2O7 reagents

Several new supported K₂Cr₂O₇ reagents are used in the oxidation of secondary alcohols. The influence of the number of active sites and the nature of solid support on the yield is discussed. The influence of the structure of alcohol on the yield of ketone is analyzed.

---

K₂Cr₂O₇ . . .

     

Ba(OH)2 as catalyst in organic reactions, part XIV. Michael addition catalyzed by barium complex salts in the homogeneous phase

Michael addition to chalcone is catalyzed by barium complex salts in the homogeneous phase under various conditions. The nature of these intermediates is analyzed. These complex salts are described for the first time. The Michael adduct of malonodinitrile to chalcone is described for the first time.

---

, , . . . . .