Physical and Chemical Properties of Magnetite and Magnetite-Polymer Nanoparticles and Their Colloidal Dispersions

The properties of polymer-coated magnetite nanoparticles, which have the potential to be used as effective magnetic resonance contrast agents, have been studied. The magnetite particles were synthesized by using continuous synthesis in an aqueous solution. The polymer-coated magnetite nanoparticles were synthesized by seed precipitation polymerization of methacrylic acid and hydroxyethyl methacrylate in the presence of the magnetite nanoparticles. The particle size was measured by laser light scattering. It was shown that the particle size, variance, magnetic properties, and stability of aqueous magnetite colloidal dispersion strictly depend on the nature of the stabilizing agent. The average hydrodynamic radius of the magnetite particles was found to be 5.7 nm in the stable aqueous colloidal dispersion. An inclusion of the magnetite particle into a hydrophilic polymeric shell increases the stability of the dispersion and decreases the influence of the stabilizing agent on the magnetic and structural properties of the magnetite particles as was shown by X-ray diffraction and M?ssbauer and IR spectroscopy, as well as by vibrating sample magnetometry. The variation in the polymeric shell size and the polymer net density can be useful tools for evaluation of the polymer-coated magnetite particles as effective contrast agents. Copyright 1999 Academic Press.     

Surfactant-free miniemulsion polymerization as a simple synthetic route to a successful encapsulation of magnetite nanoparticles

Due to the existing interest in new hybrid particles in the colloidal range based on both magnetic and polymeric materials for applications in biotechnological fields, this work is focused on the preparation of magnetic polymer nanoparticles (MPNPs) by a single-step miniemulsion process developed to achieve better control of the morphology of the magnetic nanocomposite particles. MPNPs are prepared by surfactant-free miniemulsion polymerization using styrene (St) as a monomer, hexadecane (HD) as a hydrophobe, and potassium persulfate (KPS) as an initiator in the presence of oleic acid (OA)-modified magnetite nanoparticles. The effect of the type of cross-linker used [divinylbenzene (DVB) and bis[2-(methacryloyloxy)ethyl] phosphate (BMEP)] together with the effect of the amount of an aid stabilizer (dextran) on size, particle size distribution (PSD), and morphology of the hybrid nanoparticles synthesized is analyzed in detail. The mixture of different surface modifiers produces hybrid nanocolloids with various morphologies: from a typical core-shell composed by a magnetite core surrounded by a polymer shell to a homogeneously distributed morphology where the magnetite is uniformly distributed throughout the entire nanocomposite.     

Preparation and characterization of magnetic polymeric composite particles by miniemulsion polymerization

A water‐based magnetite ferrofluid, with an average size of about 10 nm, was prepared in a first step by the chemical coprecipitation of ferrous and ferric salts. Oil‐based styrene (St) magnetite ferrofluid was obtained by the acidification of the water‐based magnetite ferrofluid and the dispersion of the acidified magnetite in St. Magnetic polymeric composite particles (MPCPs) were prepared by miniemulsion polymerization in the presence of the oil‐based St magnetite ferrofluid with hexadecane as a hydrophobe, 2,2′‐azobisisobutyronitrile as an initiator, and sodium dodecyl sulfate as an emulsifier. Methacrylic acid was used as a comonomer, and hydroxyethyl cellulose and polyvinylpyrrolidone were used as aid stabilizers subsequently. With the aim of improving the encapsulation degree of magnetite, avoiding pure polymer particles and exposed magnetite particles, and obtaining the narrowest particle size distributions, the encapsulation conditions of magnetite were investigated in detail. The results show that miniemulsion polymerization is an effective method for encapsulating magnetite into a hydrophobic polymer successfully. Exposed magnetite particles and pure polymer particles can be avoided completely by the selection of the appropriate preparation conditions. All the resulting MPCPs exhibited superparamagnetism and possessed some magnetic response. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4187–4203, 2006     

Magnetite 3D colloidal crystals formed in the early solar system 4.6 billion years ago

Three-dimensional colloidal crystals made of ferromagnetic particles, such as magnetite (Fe(3)O(4)), cannot be synthesized in principle because of the strong attractive magnetic interaction. However, we discovered colloidal crystals composed of polyhedral magnetite nanocrystallites of uniform size in the range of a few hundred nanometers in the Tagish Lake meteorite. Those colloidal crystals were formed 4.6 billion years ago and thus are much older than natural colloidal crystals on earth, such as opals, which formed about 100 million years ago. We found that the size of each individual magnetite particle determines its morphology, which in turn plays an important role in deciding the packing structure of the colloidal crystals. We also hypothesize that each particle has a flux-closed magnetic domain structure, which reduces the interparticle magnetic force significantly.     

Optimal design and characterization of superparamagnetic iron oxide nanoparticles coated with polyvinyl alcohol for targeted delivery and imaging

Superparamagnetic iron oxide nanoparticles (SPION) with narrow size distribution and stabilized by polyvinyl alcohol (PVA) were synthesized. The particles were prepared by a coprecipitation technique using ferric and ferrous salts with a molar Fe3+/Fe2+ ratio of 2. Using a design of experiments (DOE) approach, the effect of different synthesis parameters (stirring rate and base molarity) on the structure, morphology, saturation magnetization, purity, size, and size distribution of the synthesized magnetite nanoparticles was studied by various analysis techniques including X-ray powder diffraction (XRD), thermogravimetric analysis (TGA) with differential scanning calorimetry (DSC) measurements, vibrating-sample magnetometer (VSM), transmission electron microscopy (TEM), UV-visible, and Fourier transform infrared (FT-IR) spectrometer. PVA not only stabilized the colloid but also played a role in preventing further growth of SPION followed by the formation of large agglomerates by chemisorption on the surface of particles. A rich behavior in particle size, particle formation, and super paramagnetic properties is observed as a function of molarity and stirring conditions. The particle size and the magnetic properties as well as particle shape and aggregation (individual nanoparticles, magnetic beads, and magnetite colloidal nanocrystal clusters (CNCs) are found to be influenced by changes in the stirring rate and the base molarity. The formation of magnetic beads results in a decrease in the saturation magnetization, while CNCs lead to an increase in saturation magnetization. On the basis of the DOE methodology and the resulting 3-D response surfaces for particle size and magnetic properties, it is shown that optimum regions for stirring rate and molarity can be obtained to achieve coated SPION with desirable size, purity, magnetization, and shape.     

Impact of initiators in preparing magnetic polymer particles by miniemulsion polymerization

Sub-micron sized polystyrene particles containing magnetite more than 30 wt.% were prepared by miniemulsion polymerization with commercially available ferricolloid. The effects of some water-soluble initiators and/or oil-soluble initiators on the particles characteristics, such as the size, morphology, magnetic properties and colloidal stability, were studied. The size of monomer droplets/polymer particles increased from 60 to 300 nm during polymerization, keeping magnetic in core when potassium persulfate (KPS) or ammonium persulfate (APS) was used as the sole initiator. These particles were easily separated from the medium within short time scale in external magnetic field, while such characteristics were controlled by the amount of persulfate used for the polymerization. In contrast, when 2,2′-azobis isobutyronitrile (AIBN) was used as the initiator, the size of droplets/particles was retained to be 90 nm at the most and magnetite nanoparticles located at the surface of polystyrene particles, which were so colloidally stable that they were not separated in external magnetic field. The above-mentioned effect of initiators on particle size in persulfate system was likely originated from the decrease of pH value and the increase of ionic strength, which induced the fusion of droplets/particles containing magnetite. Mixed-initiators system resulted in intermediate characteristics, compared with each initiator system. The location of magnetite in the particle seems to depend on where initiation/polymerization occurred in each initiator system.     

Ferrogel: a new magneto-controlled elastic medium

Magnetic-field-sensitive gels, called ferrogels, have been prepared by introducing monodomain, magnetite particles of colloidal size into chemically crosslinked poly(vinyl alcohol) hydrogels. The influence of a non-uniform external magnetic field on the shape of gel tubes and the possibility to induce elongation and contraction by means of a magnetic field gradient produced by an electromagnet have been demonstrated. It was shown that both the concentration of magnetite particles and the crosslinking density of the ferrogels play an essential role in the magneto-elastic behaviour.     

PS colloidal particles stabilized by graphene oxide

Exfoliated graphene oxide (GO) sheets with hydrophilic functional groups on the surface were prepared by the oxidation of graphite. Because of the hydrophilic groups on the sheets and the hydrophobic carbon surface, GO sheets were located at the oil-water interface and could be used as a stabilizer in Pickering emulsions. After the Pickering emulsion polymerization of styrene, PS colloidal particles with GO sheets on the surface were prepared. The size of the GO sheets exerts an important influence on the preparation of PS colloidal particles. Small GO sheets located at the liquid-liquid interface and GO-stabilized PS colloidal particles were prepared; however, for large GO sheets, smaller PS colloidal particles prepared on the GO surface were observed. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used to characterize the structure and morphology of the colloidal particles. TEM, SEM, and XPS results all suggest the successful preparation of GO-stabilized PS colloidal particles.     

Magnetic Polymer Composite Particles Via In situ Inverse Miniemulsion Polymerization Process

We aimed at preparing magnetic iron oxide particles by the oxidation-precipitation method in order to encapsulate these particles in polymer matrices composed of poly(acrylamide-styrene sulfonic acid sodium salt). Nanocomposites were synthesized by the incorporation of surface treated magnetic nanoparticles in the synthesized polymers via in situ inverse mini-emulsion polymerization process. The study parameter was the ionic monomer content in the synthesized polymers. The structure and the morphology of the magnetic nanogels were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), dynamic light scattering (DLS), thermal gravimetric analysis (TGA) and scanning electron microscopy (SEM). FTIR and XRD showed that pure magnetite was formed and successfully encapsulated in the composite nanoparticles. The polymer encapsulation could reduce the susceptibility to leaching and could protect the magnetite particle surfaces from oxidation. The ionic monomer content had a great effect on the magnetization behavior. Magnetite prepared by the oxidation precipitation method, of 50 nm mean particle size, was embedded successfully into the polymer nanogels with a reasonable magnetic response, as proved by vibrating sample magnetometer measurement. Magnetic nanocomposites were proven to be super-ferromagnetic materials.     

Synthesis of amino‐functionalized latex particles by a multistep method

Cationic latex particles with surface amino groups were prepared by a multistep batch emulsion polymerization. In the first one or two steps, monodisperse cationic latex particles to be used as the seed were synthesized, and in the third step, two different amino‐functionalized monomers [aminoethylmethacrylate hydrochloride (AEMH) and vinylbenzylamine hydrochloride (VBAH)] were used to synthesize the final functionalized latex particles. 2,2′‐Azobisisobutyramidine dihydrochloride was used as the initiator, and different concentrations of two quaternary ammonium emulsifiers with hydrophobic chains of different lengths were examined. To characterize the final latexes yields were obtained gravimetrically, and particle size distributions and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The amount of amino groups was determined by fluorimetry. The effect of the amino‐functional monomer used on the final latexes and the colloidal behavior of the system were studied. The influence of the different conditions utilized to synthesize the latexes on the colloidal stability of the particles was evaluated in terms of the Fuchs stability ratio and electrophoretic mobility. High yields of the amino‐functional monomers were obtained. Surface amino, amidine, and quaternary ammonium groups provided the cationic character. The colloidal stability behavior of the products obtained was compatible with their cationic character. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2929–2936, 2001     

Effect of the synthesis conditions on the size of magnetite nanoparticles produced by high-temperature reductive hydrolysis

A study was made into the effect of the conditions (synthesis temperature, water content, iron salt(III) concentration, and nature of precipitant) of the synthesis of magnetite nanoparticles by high-temperature reductive hydrolysis of iron(III) salts in an ethylene glycol medium on their size and morphology. It was shown that is basically possible to carry out the direct synthesis of spherical particles with an average size of 55–170 nm while varying synthesis conditions. The obtained particles were characterized by X-ray powder diffraction analysis, and their magnetic properties were explored. The synthesized particles are ferrimagnets. The magnetic moments, numbers, and sizes of domains in magnetite particles of various sizes were found.     

Synthesis of nano-sized magnetic colloidal particles from ferrous salts and hydroxylated poly(butyl methacrylate-b-glycidyl methacrylate)

Poly(butyl methacrylate-b-glycidyl methacrylate) is used to prepare magnetic nanoparticles from ferrous salts. The structural identification of synthesized colloidal particles and bulk magnetite is performed via X-ray diffraction. Magnetic hysteresis studies show that the obtained microspheres are specified as soft magnetic materials. Microspheres have a ferrite core and a polymer shell. The size and size dispersion of the microspheres decrease with the total concentration of ferrous salts. The text was submitted by the authors in English.     

Synthesis of highly monodisperse particles composed of a magnetic core and fluorescent shell

Highly monodisperse particles composed of a magnetic silica core and fluorescent polymer shell were synthesized with a combined technique of heterocoagulation and soap-free emulsion polymerization. Prior to heterocoagulation, monodisperse, submicrometer-sized silica particles were prepared with the Stober method, and magnetic nanoparticles were prepared with a modified Massart method in which a cationic silane coupling agent of N-trimethoxysilylpropyl- N, N, N-trimethylammonium chloride was added just after coprecipitation of Fe (2+) and Fe (3+). The silica particles with negative surface potential were heterocoagulated with the magnetic nanoparticles with positive surface potential. The magnetic silica particles obtained with the heterocoagulation were treated with sodium silicate to modify their surfaces with silica. In the formation of a fluorescent polymer shell onto the silica-coated magnetic silica cores, an amphoteric initiator of 2,2'-azobis[ N-(2-carboxyethyl)-2-2-methylpropionamidine] (VA-057) was used to control the colloidal stability of the magnetic cores during the polymer coating. The polymerization of St in the presence of a hydrophobic fluorophore of pyrene could coat the cores with fluorescent polymer shells, resulting in monodisperse particles with a magnetic silica core and fluorescent polymer shell. Measurements of zeta potential for the composite particles in different pH values indicated that the composite particles had an amphoteric property originating from VA-057 initiator.     

Elaboration of hydrophilic aminodextran containing submicron magnetic latex particles

Aminodextran containing submicron magnetic latex particles were prepared in two steps: (a) transformation of oil-in-water magnetic emulsion into structured magnetic latex particles via combination of seed and miniemulsion-like polymerization process and (b) immobilization (adsorption and chemical grafting) of prepared aminodextran onto negatively charged seed magnetic latex particles. The elaborated magnetic latex particles were characterized in terms of particle size, size distribution, morphology, surface charge density, chemical composition, magnetic properties, and also colloidal stability. The results showed that the morphology of the prepared seed magnetic latex is core–shell like and the cationic latex particles are hydrophilic and of high colloidal stability, irrespective of the aminodextran immobilization process.     

Comparative Study on the Collapse Transition of Poly(N-isopropylacrylamide) Gels and Magnetic Nanoparticles Loaded Poly(N-isopropylacrylamide) Gels

A novel polymer gel exhibiting simultaneous temperature and magnetic field sensitivity has been prepared and studied. Poly(N-isopropylacrylamide) (PNIPA) and magnetic nanoparticles (magnetite, Fe₃O₄) loaded PNIPA gel beads with mm size and monolith gels with cm size were prepared. The dependence of swelling degree on the temperature has been studied. The effects of cross-linking density and the presence of magnetic nanoparticles on the equilibrium swelling degree as well as on the collapse transition have been investigated. Swelling kinetic measurements were also made. By comparing the equilibrium swelling properties of PNIPA and magnetite loaded PNIPA gels it was found that the built in magnetic nanoparticles do not modify the temperature sensitivity of these gels. Within the experimental accuracy the temperature of the collapse transition was not sensitive to the presence of magnetic particles. We have compared the swelling behaviour of mm size gel beads to the cm size monolith gels in order to study the influence of surface skin layer on the swelling equilibrium. It was established that the extent of surface skin formation was decreased by the presence of magnetic particles.     

氨基酸功能化的果胶/姜黄素胶体粒子的合成与性质

通过酯化反应合成了新型的氨基酸功能化的果胶衍生物, 通过红外光谱(FTIR)和元素分析确认了果胶衍生物的化学组成及结构, 用动态光散射(DLS)和透射电子显微镜(TEM)表征了果胶衍生物胶体的形貌和尺寸. 结果表明, 果胶衍生物胶体呈现不规则的球状结构, 粒度分布较均一, 平均粒径200 nm. 用紫外-可见(UV-Vis)光谱测试了果胶衍生物胶体对姜黄素的包裹和控制释放, 结果表明, 姜黄素能够有效被果胶衍生物胶束包裹. 体外细胞毒理实验结果表明, 果胶衍生物胶体载体能显著提高姜黄素对HepG2细胞生长的抑制作用.     

Nanocomposite particles with core-shell morphology II. An investigation into the affecting parameters on preparation of Fe3O4-poly (butyl acrylate-styrene) particles via miniemulsion polymerization

The encapsulation of inorganic particles with polymers is desirable for many applications in order to improve the stability of the encapsulated products and disperse ability in different media. Colloidal particles with magnetic properties have become increasingly important both technologically and for fundamental studies. This is due to their tunable anisotropic. In the absence of an applied magnetic field, the particles have isotropic sphere dispersion, whereas in an external magnetic field the particles form anisotropic structures. Here, latexes containing nanocomposite particles of styrene-butyl acrylate/Fe₃O₄ with core-shell structure were prepared through miniemulsion polymerization technique. Magnetic composite nanospheres with high magnetic content were synthesized through miniemulsion polymerization using a new process based on a three-steps preparation route including two miniemulsion processes: (1) preparing a dispersion of oleic acid coated magnetite particles in water; (2) mixing of modified magnetite particles with styrene/butyl acrylate in the presence of sodium dodecyl sulfate (SDS), sorbitane mono oleate (Span 80), hexadecane (HD) and (3) miniemulsification of the modified Fe₃O₄ into the monomer droplets to reach to complete encapsulation. Subsequent polymerization generated magnetic nanocomposite spheres. Hence, the copolymerization reaction was performed on the surface of such particles in order to obtain core-shell morphology for these nanoparticles, which were characterized by several techniques such as TEM, SEM, DLS, TGA, VSM and FT-IR. The magnetic copolymer particles with diameter of 120-170 nm were obtained. The effect of several parameters such as magnetite, surfactants and hydrophobe amounts on the stability, particle size and magnetization were investigated and also optimized.     

Magnetoswitchable controlled hydrophilicity/hydrophobicity of electrode surfaces using alkyl-chain-functionalized magnetic particles: application for switchable electrochemistry

Magnetic nanoparticles consisting of undecanoate-capped magnetite (average diameter approximately 4.5 nm; saturated magnetization, M(s), 38.5 emu g(-1)) are used to control and switch the hydrophobic or hydrophilic properties of the electrode surface. A two-phase system consisting of an aqueous buffer solution and a toluene phase that includes the suspended capped magnetic nanoparticles is used to control the interfacial properties of the electrode surface. The magnetic attraction of the functionalized particles to the electrode by means of an external magnet yields a hydrophobic interface that acts as an insulating layer, prohibiting interfacial electron transfer. The retraction of the magnetic particles from the electrode to the upper toluene phase by means of the external magnet generates a hydrophilic electrode that reveals effective interfacial electron transfer. The electron-transfer resistance and double-layer capacitance of the electrode surface upon the attraction and retraction of the functionalized magnetic particles to and from the electrode, respectively, by means of the external magnet were probed by Faradaic impedance spectroscopy (R(et) = 170 Omega and C(dl) = 40 microF sm(-2) in the hydrophilic state of the electrode and R(et) = 22 k Omega and C(dl) = 0.5 microF sm(-2) in the hydrophobic state of the interface). The magnetoswitchable control of the interface enables magnetic switching of the bioelectrocatalytic oxidation of glucose in the presence of glucose oxidase and ferrocene dicarboxylic acid to "ON" and "OFF" states.     

Water-dispersible Fe3O4 nanoparticles stabilized with a biodegradable amphiphilic copolymer

In this work, we report a green synthetic method using water-dispersible magnetite nanoparticles containing oleic acid and poly(2-ethyl-2-oxazoline)-poly(ɛ-caprolactone) diblock copolymer as the magnetite nanoparticle dispersants. The Fe₃O₄ nanoparticles were prepared by co-precipitation and had a bilayer surface with a hydrophobic inner poly(ɛ-caprolactone) (PCL) layer and hydrophilic corona poly(2-ethyl-2-oxazoline) (POX) blocks. Also, the role of the ultrasonicating treatment's duration on the percent of magnetite in the complex and on its magnetic properties was investigated. Transmission electron microscopy (TEM) showed the average particle size to be about 10–20 nm in diameter for nanoparticles.     

Preparation and sedimentation behavior in magnetic fields of magnetite-covered clay particles

This work is devoted to the preparation of magnetite-covered clay particles in aqueous medium. For this purpose, magnetite nanoparticles were synthesized by a coprecipitation method. These magnetic particles are adhered to sodium montmorillonite (NaMt) particles in aqueous suspensions of both materials, by appropriate control of the electrolyte concentrations. The best condition to produce such heteroaggregation corresponds to acid pH and approximately 1 mol/L ionic strength, when the electrokinetic potentials (zeta-potential) of both NaMt and Fe3O4 particles have high enough and opposite sign, as demonstrated from electrophoresis measurements. When a layer of magnetite re-covers the clay particles, the application of an external magnetic field induces a magnetic moment in clay-magnetite particles parallel to the external magnetic flux density. The sedimentation behavior of such magnetic particles is studied in the absence or presence of an external magnetic field in a vertical direction. The whole sedimentation behavior is also strongly affected by the formation of big flocculi in the suspensions under the action of internal colloidal interactions. van der Waals and dipole-dipole magnetic attractions between magnetite-covered clay particles dominate the flocculation processes. The different relative orientation of the clay-magnetite particles (edge-to-edge, face-to-edge, and face-to-face) are discussed in order to predict the most favored flocculi configuration.