Fourier-transform Raman and infrared spectroscopic analysis of dipyrrinones and mesobilirubins

The Fourier-transform Raman (FT-Raman), infrared (FT-IR), and UV-visible absorption spectra of four dipyrrinones and two mesobilirubins have been investigated in the solid state and in CH2Cl2 solutions. A detailed spectral analysis, assignment and discussion of these spectra are presented. The bands at 1735-1738, 1691-1707 and 1359-1377 cm(-1) which were assigned to the stretching vibrations of the C-O-C and C-O-H and symmetric deformation of C-H bonds, respectively, can act as a marker to distinguish the compounds of this class. The striking differences between the spectra of the compounds suggest that mesobilirubin XIIIalpha is tending to adopt as ridge-tile conformation, rather than linear conformation.     

Determination of iprodione in agrochemicals by infrared and Raman spectrometry

Two methodologies based on vibrational spectrometry—making use of Fourier transform infrared absorption (FTIR) and Raman spectrometry—were developed for iprodione determination in solid pesticide formulations. The FTIR procedure involved the extraction of iprodione by CHCl₃, and the latter determination involved measuring the peak area between 1450 and 1440 cm⁻¹, corrected using a horizontal baseline defined at 1481 cm⁻¹. FT-Raman determination was performed directly on the powdered solid products, using standard chromatography glass vials as sample cells and measuring the Raman intensity between 1003 and 993 cm⁻¹, with a two-point baseline correction established between 1012 and 981 cm⁻¹. The sensitivities obtained were 0.319 area values g mg⁻¹ for FTIR determination and 5.58 area values g g⁻¹ for FT-Raman. The repeatabilities, taken to be the relative standard deviation of five independent measurements at 1.51 mg g⁻¹ and 10.98% w/w concentration levels, were equal to 0.16% and 0.9% for FTIR and FT-Raman, respectively, and the limits of detection were 0.3 and 0.2% w/w (higher than those obtained for HPLC, 0.016% w/w). FTIR determination provided a sample frequency of 60 h⁻¹, higher than those obtained for the Raman and reference chromatography methods (25 and 8.6 h⁻¹, respectively). On the other hand, the new FT-Raman method eliminates reagent consumption and waste generation, and reduces the need for sample handling and the contact of operator with the pesticide. In spite of their lack of sensitivity, vibrational procedures can therefore provide viable environmentally friendly alternatives to laborious, time- and solvent-consuming reference chromatography methods for quality control in commercially available pesticide formulations.     

The infrared and Raman spectra of 2,4-and 2,5-dimethylbenzaldehydes

The vibrational frequencies of 2,4-and 2,5-dimethylbenzaldehydes have been reported from the study of ir absorption and Raman spectra of these molecules recorded in liquid phase. The probable assignments for all the frequencies are presented in terms of the fundamentals, overtones or combinations     

Diagnostic Raman spectroscopy for the forensic detection of biomaterials and the preservation of cultural heritage

This paper reviews the contributions of analytical Raman spectroscopy to the non-destructive characterisation of biological materials of relevance to forensic science investigations, including the sourcing of resins and the identification of the biodegradation of art and archaeological artefacts. The advantages of Raman spectroscopy for non-destructive analysis are well-appreciated; however, the ability to record molecular information about organic and inorganic species present in a heterogeneous specimen at the same time, the insensitivity of the Raman scattering process to water and hydroxyl groups, which removes the necessity for sample desiccation, and the ease of illumination for samples of very small and very large sizes and unusual shapes are also apparent. Several examples are used to illustrate the application of Raman spectroscopic techniques to the characterisation of forensic biomaterials and for the preservation of cultural heritage through case studies in the following areas: wall-paintings and rock art, human and animal tissues and skeletal remains, fabrics, resins and ivories.     

Raman and infrared vibrational modes of tricosane paraffin under high pressure

This paper reports an experimental study about the pressure dependence of the vibrational modes of tricosane paraffin (C₂₃H₄₈) investigated by in situ Raman and infrared spectroscopy in a diamond anvil cell (DAC). The main vibrational bands were followed up to 11 GPa and the observed behavior indicated a conformational disorder induced by pressure, corresponding to a transition from ordered to disordered state of the linear chains from 2 to 5 GPa followed by a transition to an amorphous state under pressure above 5 GPa. However, this behavior was reversible after compression–decompression cycle showing that this linear compound was structurally and chemically stable up to 11 GPa at room temperature.     

A Raman and infrared spectroscopic study of the phosphate mineral laueite

A laueite mineral sample from Lavra Da Ilha, Minas Gerais, Brazil has been studied by vibrational spectroscopy and scanning electron microscopy with EDX. Chemical formula calculated on the basis of semi-quantitative chemical analysis can be expressed as (Mn²⁺_0.85,Fe²⁺_0.10Mg_0.05)_∑1.00(Fe³⁺_1.90,Al_0.10)_∑2.00(PO₄)₂(OH)₂·8H₂O.The laueite structure is based on an infinite chains of vertex-linked oxygen octahedra, with Fe³⁺ occupying the octahedral centers, the chain oriented parallel to the c-axis and linked by PO₄ groups. Consequentially not all phosphate units are identical. Two intense Raman bands observed at 980 and 1045 cm⁻¹ are assigned to the ν₁ PO₄³⁻ symmetric stretching mode. Intense Raman bands are observed at 525 and 551 cm⁻¹ with a shoulder at 542 cm⁻¹ are assigned to the ν₄ out of plane bending modes of the PO₄³⁻. The observation of multiple bands supports the concept of non-equivalent phosphate units in the structure. Intense Raman bands are observed at 3379 and 3478 cm⁻¹ and are attributed to the OH stretching vibrations of the hydroxyl units. Intense broad infrared bands are observed. Vibrational spectroscopy enables subtle details of the molecular structure of laueite to be determined.     

An infrared and Raman spectroscopic study of polyanilines co-doped with metal ions and H+

Polyanilines doped with (HCl+KCl) and (HCl+CoCl2) were prepared by co-doping method, respectively. For comparison, polyaniline emeraldine salt (ES) by doping with HCl and its emeraldine base (EB) form were also synthesized. The co-doped polyanilines, ES and EB samples were all characterized by Fourier transform infrared spectroscopy (FTIR) and Raman spectroscopy aiming to understand the transformations in the different doping status. The results show that the doping degree of K+ ions is considerably higher than that of Co2+ ions under the same co-doping conditions possibly due to different pseudoprotonation constants of EB with K+ ions and Co2+ ions. Moreover, morphology difference of polyaniline co-doped with alkaline metal ions or transition meal ions may arise from different coordination geometry of metal ions. Nevertheless, there are similar chemical transformations of quinoid units to benzenoid ones on polyaniline backbones for the ES and both co-doped samples. And the polyaniline backbones co-doped with H+ and metal cations are found to attain weaker charge delocalization than the ES which is doped solely with H+.     

Investigation of Raman and infrared phonon modes in case of barium bismuth tantalate (BaBi2Ta2O9)

The Raman and the infrared wavenumbers in the Aurivillius structure BaBi₂Ta₂O₉ (BBT) having space group I4/mmm (no. 139-D_4h¹⁷) are investigated using normal coordinate analysis. The calculation of zone center phonons incorporates seven stretching and seven bending force constants. The Raman and the infrared frequencies for BBT have been assigned for the first time in I4/mmm phase. The calculated Raman and infrared wavenumbers are in very good agreement with the observed ones. The potential energy distributions (PED) are also investigated for each normal mode in BBT and the contributions of different force constants to various frequencies are determined.     

Infrared and infrared emission spectroscopy of the zinc carbonate mineral smithsonite

Infrared emission and infrared spectroscopy has been used to study a series of selected natural smithsonites from different origins. An intense broad infrared band at 1440cm(-1) is assigned to the nu(3) CO(3)(2-) antisymmetric stretching vibration. An additional band is resolved at 1335cm(-1). An intense sharp Raman band at 1092cm(-1) is assigned to the CO(3)(2-) symmetric stretching vibration. Infrared emission spectra show a broad antisymmetric band at 1442cm(-1) shifting to lower wavenumbers with thermal treatment. A band observed at 870cm(-1) with a band of lesser intensity at 842cm(-1) shifts to higher wavenumbers upon thermal treatment and is observed at 865cm(-1) at 400 degrees C and is assigned to the CO(3)(2-)nu(2) mode. No nu(2) bending modes are observed in the Raman spectra for smithsonite. The band at 746cm(-1) shifts to 743cm(-1) at 400 degrees C and is attributed to the CO(3)(2-)nu(4) in phase bending modes. Two infrared bands at 744 and around 729cm(-1) are assigned to the nu(4) in phase bending mode. Multiple bands may be attributed to the structural distortion ZnO(6) octahedron. This structural distortion is brought about by the substitution of Zn by some other cation. A number of bands at 2499, 2597, 2858, 2954 and 2991cm(-1) in both the IE and infrared spectra are attributed to combination bands.     

Lanthanum trilactate: Vibrational spectroscopic study − infrared/Raman spectroscopy

In this study lanthanum trilactate was prepared by neutralization reaction of lactic acid and lanthanum oxide, purified and identified by X-ray powder diffraction. Infrared spectra (Mid-IR region 4000–650 cm⁻¹) and Raman spectra (Stokes region 4000–100 cm⁻¹) of the high quality crystalline samples have been recorded and presented for the first time. For comparison DFT calculations were performed using Gaussian 09 D.01 and agreement between predicted and measured spectral data has been achieved. Acquired information can be utilized for substance identification for example in various industrial applications or in biological systems.     

Fabrication and biocompatibility of cell outer membrane mimetic surfaces

The surface design used for improving biocompatibility is one of the most important issues for the fabrication of medical devices.For mimicking the ideal surface structure of cell outer membrane,a large number of polymers bearing phosphorylcholine(PC) groups have been employed to modify the surfaces of biomaterials and medical devices.It has been demonstrated that the biocompatibility of the modified materials whose surface is required to interact with a living organism has been obviously improved by introducing PC groups.In this review,the fabrication strategies of cell outer membrane mimetic surfaces and their resulted biocompatibilities were summarized.     

Study of the hydrogen bonding of 1,4-bis[(3,4,5-trihexyloxyphenyl)hydrazide]phenylene in crystalline and liquid crystalline phases using infrared,Raman, and two-dimensional correlation spectroscopy

The vibrational bands of a dihydrazide derivative, 1,4-bis[(3,4,5-trihexyloxyphenyl)hydrazide]phenylene (TC6), observed in the Raman and infrared spectra were assigned. The intermolecular hydrogen bonding vibrational bands due to CO and NH groups in the low-frequency Raman spectra were observed at 111 and 94 cm⁻¹ in the crystalline and liquid crystalline (LC) phases, respectively. The sequential order of changes in the hydrogen bonding and alkyl chains was opposite in the crystalline and LC phases. The modifications in the hydrogen bonding occurred prior to conformational changes in the hydrocarbon chains in the crystalline phase; however, a reverse trend was observed in the LC phase. Simultaneously, the two-dimensional (2D) IR and Raman correlation spectroscopic analysis showed that the amide I band of TC6 in the LC phase comprised at least five distinct bands. In addition, the hetero 2D correlation between the NH and CO groups confirmed that no free NH and CO groups existed in the LC phase.     

Analysis of multicomponent polymer systems by raman microscopy

The Raman microscope is one of the most convenient instruments for analyzing the structural characteristics and changes in the interfacial region of multicomponent systems. This is confirmed by the results obtained in the field of packaging materials, nanocomposites, and basalt fibre reinforced composites. In the course of this study, the chemical character of the surface and interfacial regions were investigated and, in addition, the local characteristics of the crystallization process of the polymer matrix could be determined.     

Non-invasive detection of cocaine dissolved in beverages using displaced Raman spectroscopy

We demonstrate the potential of Raman spectroscopy to detect cocaine concealed inside transparent glass bottles containing alcoholic beverages. A clear Raman signature of cocaine with good signal-to-noise was obtained from a ∼300 g solution of adulterated cocaine (purity 75%) in a 0.7 L authentic brown bottle of rum with 1 s acquisition time. The detection limit was estimated to be of the order of 9 g of pure cocaine per 0.7 L (∼0.04 moles L⁻¹) with 1 s acquisition time. The technique holds great promise for the fast, non-invasive, detection of concealed illicit compounds inside beverages using portable Raman instruments, thus permitting drug trafficking to be combated more effectively.     

Terahertz, infrared and Raman vibrational assignments of [FeFe]-hydrogenase model compounds

Using Raman, terahertz (THz), and mid-infrared (IR) spectroscopies, the vibrational spectra of two chromophore models of hydrogen-producing [FeFe]-hydrogenase, Fe₂(μ-S₂C₃H₆)(CO)₆ and Fe₂(μ-S₂C₂H₄)(CO)₆, have been assigned. The combination of absorption and scattering techniques, along with DFT calculations, allows for assignments to be made without traditional isotopic substitution methods.     

Hydrated double carbonates – A Raman and infrared spectroscopic study

The Raman spectra of selected double carbonates including pirssonite, gaylussite, shortite and quintinite complemented with infrared spectra have been used to characterise the structure of these carbonate minerals. By using a Libowitzky type function hydrogen bond distances for these minerals of 2.669–2.766 Å are estimated. The variation in the hydrogen bond distances contributed to the stability of the mineral. The Raman spectrum of pirssonite shows a single band at 1080 cm⁻¹ attributed to the (CO₃)²⁻ symmetric stretching mode, in contrast to shortite and quintinite where two bands are observed. Multiple bands are observed for the antisymmetric stretching and bending region for these minerals proving that the carbonate unit is distorted in the structure of pirssonite and gaylussite.     

Comparative analysis of smokeless gunpowders by Fourier transform infrared and Raman spectroscopy

Fourier Transform Infrared (FTIR) and Raman spectroscopic techniques were used to perform a comparative study of the spectral profiles of single-base, double-base and triple-base smokeless gunpowders. Preliminary results based on visual comparison of the spectra point out that spectra obtained by both vibrational techniques were useful for a rapid identification of gunpowders containing dinitrotoluene as one of the major components and triple-base gunpowders. Additionally, the Raman spectra of gunpowders with diphenylamine in its primary composition showed a characteristic band, assigned to 2-nitro-diphenylamine, allowing the identification of this type of gunpowders.     

Analysis by Raman and infrared spectroscopy combined with theoretical studies on the identification of plasticizer in PVC films

Raman and Fourier Transform infrared spectroscopy were used to study the vibrational spectra in commercial polyvinyl chloride (PVC) flexible films. In order to have insights of the PVC and the plasticizer structures, density functional theory calculations were conducted via B3LYP hybrid functional. The infrared and Raman calculations took into account geometry optimization of the PVC film, the plasticizer DEHA and the convolution of both. The convoluted spectra were then compared with the experimental data. Finally, the thermal stability of the PVC films was checked through one-hour thermal treatment of the samples comprising temperatures ranges from 50 to 200 °C.     

The effect of high external pressures on the infrared and Raman spectra of crystalline tetra-n-propylammonium bromide

The infrared and Raman spectra of crystalline tetra-n-propylammonium bromide, (n-C₃H₇)₄NBr, have been measured in the 3000 – 700 cm⁻¹ region and vibrational assignments are proposed in part on the basis of the known crystal structure. Pressure-tuning infrared and Raman studies of this material were also undertaken using a diamond-anvil cell. There is a pressure-induced phase transition occurring between 1.8 and 2.1 GPa, which is most likely a second-order transition. Some differences are noted between the infrared data reported here and those given in an earlier high-pressure infrared study. The spectroscopic results will be useful in examining zeolites involving (n-C₃H₇)₄NBr as a template.     

Determination of oil and water content in olive pomace using near infrared and Raman spectrometry. A comparative study

Near infrared (NIR) reflectance and Raman spectrometry were compared for determination of the oil and water content of olive pomace, a by-product in olive oil production. To enable comparison of the spectral techniques the same sample sets were used for calibration (1.74–3.93% oil, 48.3–67.0% water) and for validation (1.77–3.74% oil, 50.0–64.5% water). Several partial least squares (PLS) regression models were optimized by cross-validation with cancellation groups, including different spectral pretreatments for each technique. Best models were achieved with first-derivative spectra for both oil and water content. Prediction results for an independent validation set were similar for both techniques. The values of root mean square error of prediction (RMSEP) were 0.19 and 0.20–0.21 for oil content and 2.0 and 1.8 for water content, using Raman and NIR, respectively. The possibility of improving these results by combining the information of both techniques was also tested. The best models constructed using the appended spectra resulted in slightly better performance for oil content (RMSEP 0.17) but no improvement for water content.