Theoretical explanation of electron paramagnetic resonance and optical parameters for Cu<Superscript>2+</Superscript> ion in LiNbO<Subscript>3</Subscript> crystal

The EPR parameters, anisotropic g-factors g _x , g _y and g _z for cu²⁺ ion and hyperfine structure constants A _x , A _y and A _z for Cu²⁺ in LiNbO₃ crystal are calculated by the method of diagonalizing the full Hamiltonian matrix. The crystal-field parameters contact with the crystal structure by the aid of the superposition model. The optical transition parameters are calculated using Zhao crystal-field model. The calculated results are in good agreement with the observed values. The results are discussed.      

Up-conversion emissions of Er<Superscript>3+</Superscript>-Yb<Superscript>3+</Superscript> codoped Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles by the arc discharge synthesis method

The Er³⁺-Yb³⁺ codoped Al₂O₃ nanoparticles with an average particle size of about 50 nm have been synthesized by an arc discharge synthesis method. The green and red up-conversion emissions centered at about 526, 547 and 677 nm, corresponding respectively to the ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2 and ⁴F_9/2→⁴I_15/2 transitions of Er³⁺, were detected by a 978-nm semiconductor laser diode excitation. The Annealing has evident effect on the up-conversion emissions of the samples: The red up-conversion emission is noticeable before annealing; however, the green up-conversion emission becomes predominant after annealing. The mixture of (Er,Yb)₃Al₅O₁₂ and α-(Al,Er,Yb)₂O₃ phases is more favorable for green up-conversion emissions due to an enhancement of the ESA (I) of ⁴I_11/2+a photon→⁴F_7/2 and ET (III) of ²F_5/2(Yb³⁺)+⁴I_11/2(Er³⁺)→²F_7/2(Yb³⁺)+⁴F_7/2(Er³⁺) processes. The two-photon absorption up-conversion process is involved in the green and red up-conversion emissions. The results have proved that arc discharge synthesis is a new promising preparation technology for optical materials. Supported by National Natural Science Foundation of China (Grant No. 10804015), the Scientific Research Foundation for Doctor of Liaoning Province (Grant No. 20071095), and the Educational Committee Foundation of Liaoning Province (Grant No. 2008123)     

Hyperfine structure in EPR spectra of the catalytic system TiCl<Subscript>4</Subscript> + Al(i-C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>3</Subscript>

In an EPR study of the catalytic system TiCl₄ + Al(i-C₄H₉)₃ in toluene and isopentane in TiCl₄/oligopiperylene + Al(i-C₄H₉)₃ in toluene, we have observed a dependence of the linewidth of the hyperfine structure on the mobility of the complex in solution. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 174–177, March–April, 2007.     

VUV luminescence of Er<Superscript>3+</Superscript> ions in LiYF<Subscript>4</Subscript> and BaY<Subscript>2</Subscript>F<Subscript>8</Subscript> crystals

Vacuum ultraviolet luminescence of Er³⁺ ions in LiYF4 and BaY₂F₈ crystals has been investigated. It is revealed that under excitation by 193 nm radiation from an ArF excimer laser the interconfigurational 5d–4f radiative transitions in Er³⁺ ions are observed. It is shown that from the LiYF₄:Er crystal only the spin-forbidden luminescence (λ = 165 nm) is detected, whereas both the spin-forbidden (λ = 169 nm) and spin-allowed (λ = 160.5 nm) components are observed from the BaY₂F₈:Er crystal.     

Wavelength and oscillator strength of dipole transition 1s<Superscript>2</Superscript>2p—1s<Superscript>2</Superscript><Emphasis Type="Italic">n</Emphasis>d for Mn<Superscript>22+</Superscript> ion

The transition energies, wavelengths and dipole oscillator strengths of 1s²2p—1s² nd (3⩽n⩽9) for Mn²²⁺ ion are calculated. The fine structure splittings of 1s² nd (n</9) states for this ion are also evaluated. In calculating energy, the higher-order relativistic contribution is estimated under a hydrogenic approximation. The quantum defect of Rydberg series 1s² nd is determined according to the quantum defect theory. The results obtained in this paper excellently agree with the experimental data available in literatures. Supported by the National Natural Science Foundation of China (Grant No. 10774063)     

EPR of Yb<Superscript>3+</Superscript> ions in a monoclinic KY(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> single crystal

The electron paramagnetic resonance (EPR) of Yb³⁺ ions in a KY(WO₄)₂ single crystal was investigated at T=4.2 K and fixed frequency of 9.38 GHz. The resonance absorption observed on the lowest Kramers doublet represents the complex superposition of three spectra, corresponding to the ytterbium isotopes with different nuclear moments. The EPR spectrum is characterized by a strong anisotropy of the g-factors. The temperature dependence of the g-factors is shown to be caused by the strong spin-orbital and orbital-lattice coupling. The resonance lines broaden with increasing temperature due to the short spin-lattice relaxation times.     

Electron paramagnetic resonance parameters and local structure for Gd3+ in KY3F10

The electron paramagnetic resonance parameters, zero-field splittings (ZFSs) b₂⁰, b₄⁰, b₄⁴, b₆⁰, b₆⁴ and the g factors for Gd³⁺ on the tetragonal Y³⁺ site in KY₃F₁₀ are theoretically studied from the superposition model for the ZFSs and the approximation formula for the g factor containing the admixture of the ground ⁸S_7/2 and the excited ⁶L_7/2 (L=P, D, F, G) states via the spin-orbit coupling interactions, respectively. By analysing the above ZFSs, the local structure information for the impurity Gd³⁺ is obtained, i.e., the impurity-ligand bonding angles related to the four-fold (C₄) axis for the impurity Gd³⁺ center are found to be about 0.6° larger than those for the host Y³⁺ site in KY₃F₁₀. The calculated ZFSs based on the above angular distortion as well as the g factors are in reasonable agreement with the observed values. The present studies on the ZFSs and the local structure would be helpful to understand the optical and magnetic properties of this material with Gd dopants.      

Tunable optical parametric oscillator based on a KTP crystal,pumped by a pulsed Ti<Superscript>3+</Superscript>:Al<Subscript>2</Subscript>O<Subscript>3</Subscript> laser

We present the characteristics of an optical parametric oscillator based on a KTP crystal, pumped with noncritical phase matching by a pulsed Ti³⁺:Al₂O₃ laser, tunable in the range 677–970 nm. Tunable generation of signal and idler waves is obtained in the ranges 1030–1390 nm and 2690–3050 nm respectively. The efficiency of conversion of the pump to the signal wave is ≈23%, which for pulses of duration ≈8 nsec ensures an energy in the range 1.0–11.5 mJ. The width of the emission spectrum for the signal wave is within the range 0.8–1.8 nm and is predominantly determined by the linewidth of the Ti³⁺:Al₂O₃ pump laser. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 3, pp. 351–356, May–June, 2007.     

Electron paramagnetic resonance of Mn2+ and Gd3+ in Pr2Zn3(NO3)12.24 H2O single crystals

The electron paramagnetic resonance of Mn²⁺ and Gd³⁺ doped in Pr₂Zn₃(NO₃)₁₂.24H₂O single crystals has been studied at X-band. Mn²⁺ substitutes for two Zn²⁺ sites, while Gd³⁺ substitutes for single type of Pr³⁺ sites. The spin-Hamiltonian analysis of the EPR spectra is presented at 298 K as well as 77 K.     

Quantum cutting in Gd<Subscript>2</Subscript>SiO<Subscript>5</Subscript>: Eu<Superscript>3+</Superscript> by VUV excitation

The emission and excitation spectra of Gd₂SiO₅∶Eu³⁺ were investigated using the VUV beam line of the Beijing Synchrotron Radiation Facility (BSRF). The experimental results were discussed in the frame of visible quantum cutting process involved in Gd³⁺−Eu³⁺ system. Upon direct excitation into the⁶G _J states of Gd³⁺, two visible photon emissions from Eu³⁺ were observed. Cursory evaluation proved that Gd₂SiO₅∶Eu³⁺ is an efficient visible quantum cutter.     

One-step synthesis of colloidal Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> and γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles at room temperature

A facile room-temperature synthesis has been developed to prepare colloidal Mn₃O₄ and γ-Fe₂O₃ nanoparticles (5 to 25 nm) by an ultrasonic-assisted method in the absence of any additional nucleation and surfactant. The morphology of the as-prepared samples was observed by transmission electron microscopy. High-resolution transmission electron microscopy observations revealed that the as-synthesized nanoparticles were single crystals. The magnetic properties of the samples were investigated with a superconducting quantum interference device magnetometer. The possible formation process has been proposed.     

Zero-field splitting of <Superscript>4</Superscript><Emphasis Type="Italic">T</Emphasis><Subscript>2</Subscript> term for 3d<Superscript>3</Superscript> ions in tetragonal symmetry

By taking into account slight interactions, i.e. spin-spin, spin-other-orbit and orbit-orbit interactions, in addition to spin-orbit interaction, the zero-field splitting of ⁴ T ₂ state for 3d³ ions at tetragonal symmetry has been studied. The convergence of the approximation perturbation formula of ⁴ T ₂ state for 3d³ ions at tetragonal symmetry has been investigated, and the contributions to zero-field splitting arising from magnetic interaction and tetragonal crystal field are discussed. It is found that there exists combined mechanism between magnetic interactions and tetragonal crystal field.      

Synthesis and characterization of Mn<Superscript>2+</Superscript>-doped ZnS nanoparticles

Mn²⁺-doped ZnS nanoparticles were prepared by chemical arrested precipitation method. The samples were heated at 300, 500, 700 and 900°C. The average particle size was determined from the X-ray line broadening. Samples were characterized by XRD, FTIR and UV. The composition was verified by EDAX spectrum. The hexagonal structure of the sample was identified. The size of the particles increased as the annealing temperature was increased. The crystallite size varied from 5 nm to 34 nm as the calcination temperature increased. At around 700°C, ZnS is converted into ZnO phase due to oxidation. The emission peak of the sample is observed at 300 nm resulting in blue emission. The solid state theory based on the delocalized electron and hole within the confined volume can explain the blue-shifted optical absorption spectra. UV-VIS spectro-photometric measurement shows an indirect allowed band gap of 3.65 eV.      

Wavelength tunable linear cavity cladding pump Er<Superscript>3+</Superscript>/Yb<Superscript>3+</Superscript>co-doped fiber laser operating in L-band

We have demonstrated a novel tunable linear cavity Er³⁺/Yb³⁺ co-doped fiber laser, which utilizes amplified spontaneous emission as a secondary pump source so that it can operate in L-band. The tuning wavelength range can be up to 34 nm, from 1588.6 to 1622.6 nm, and the output power excursion of the laser at different wavelengths can be less than 0.4 dB by using a two sections of high-birefringence fiber loop mirror as the wavelength filter. The high output power of 200 mW is realized by using the cladding-pump.     

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.     

Theoretical studies of the local structures and electron paramagnetic resonance parameters for Cu2+ center in Zn(C3H3O4)2(H2O)2 single crystal

The electron paramagnetic resonance (EPR) parameters (g factors g_xx, g_yy, g_zz and hyperfine structure constants A_xx, A_yy, A_zz) are interpreted by taking account of the admixture of d-orbitals in the ground state wave function of the Cu²⁺ ion in a Zn(C₃H₃O₄)₂(H₂O)₂ (DABMZ) single crystal. Based on the calculation, local structural parameters of the impurity Cu²⁺ center were obtained (i.e. R_a≈1.92 Å, R_b≈1.96 Å, R_c≈1.99 Å). The theoretical EPR parameters based on the above Cu²⁺?O^2? bond lengths in the DABMZ crystal show good agreement with the observed values and some improvements have been made as compared with those in the previous studies.     

Passive Q-switching of a laser-diode-pumped intracavity-frequency-doubling Nd:Nd<Superscript>3+</Superscript>:NaY(WO<Subscript>4</Subscript>)<Subscript>2</Subscript>/KTP laser with Cr<Superscript>4+</Superscript>:YAG saturable absorber

Nd³⁺:NaY(WO₄)₂, known as Nd:NYW, is a new type crystal. By using laser-diode as pump source, a passive Q-switching of intracavity-frequency-doubling Nd:NYW/KTP laser has been realized with Cr⁴⁺:YAG saturable absorber. The dependence of pulse repetition rate, pulse energy, pulse width, and peak power on incident pump power for different small-signal transmissions of Cr⁴⁺:YAG are measured. The coupled rate equations are used to simulate the Q-switched process of laser, and the numerical solutions agree with the experimental results.