An investigation of micro-brownian motions in polydimethylsiloxane by complementary incoherent-neutron-scattering and nuclear-magnetic-resonance experiments below room temperature

Two different experimental methods, neutron scattering and nuclear magnetic resonance are used to investigate the random methyl group and segmental rotational jump motions in polydimethylsiloxane. It is shown that nuclear magnetic relaxation and line width experiments are complementary to incoherent neutron scattering fixed-window experiments, the principle of the fixed-window experiments being discussed in somewhat detail. Satisfactory agreement of these experimental techniques is achieved as to the determination of the two model parameters of the motional processes in question, i. e. the activation energy and the preexponential factor of the Arrhenius ansatz made for the correlation time or jump time, respectively.Contribution partly presented during the meeting of the Macromolecular Club, June 8–10, 1983 in Uppsala, the spring conference of the Deutsche Physikalische Gesellschaft, March 12–17, 1984 in Münster and the Fourth International Seminar on Polymer Physics, October 22–26, 1984 in Eyba (GDR).     

Potential theory in the problems of interfraction at small gap widths. Sphere and flat interface

An asymptotic model is proposed for the flow pattern inside a droplet when a thin liquid layer is formed at its advancing nose; at small gap widths, so far as the substantial part of the flow inside the droplet is concerned, the interface may be regarded as a flat interface. Calculations are made using the classical potential theory. The problem of hydrodynamic interaction is brought to the investigation of an integral equation for the radial velocity a the flat interface. The equation is asymptotically solved for low and high viscosities in the droplet. For these cases, results are also reported about drag force.     

Production of anomalously shaped carboxylated polymer particles by seeded emulsion polymerization

Anomalous polymer particles with a partial protuberance like octopus ocellatus were produced under alkaline conditions by seeded emulsion copolymerization for styrene and butyl acrylate, with styrene-butyl acrylate-methacrylic acid terpolymer emulsion as seed. The mechanism of production of the polymer particles was studied. By transmission electron microscopic observation of the particles at each conversion, it was observed that the anomalous polymer particles were produced by partial growth of each of the individual seed particles throughout polymerization. Ionization of the carboxyl groups and low viscosity in the growing particles during the process of polymerization were important factors for partial growth.Part CIII of the series Studies on Suspension and Emulsion.     

Change of water structure by solvents and polymers Part 4: Albumin-water solutions with acetylsalicylic,hydrochloric and ascorbic acid,lysine- and ammonium chloride and with dextrane and sorbit

Viscosity measurements were made in the temperature range of 10 °–40 °C. The equation= _o exp(B/(T-T _o )) was used with the parameterT ₀ as structure indicator, which is called the limiting temperature. For instance, hydrocarbons, as liquids with quasifree molecules, haveT ₀=O; water as a highly structured liquid hasT ₀= 140–150 K.The polymer investigated was ovalbumin in aqueous solution in a concentration comparable to that of blood. Acetylsalicylic acid produces a protein conformation which breaks the water structure in solution at a pH of within the in vivo region.The question of whether only the acidity determines the water structure breaking properties of the protein is investigated by acidifying albumin-water solutions with hydrochloric acid, lysine chloride and ascorbic acid. All these acids exhibit similar effects. A stronger influence is observed for ammonium chloride. Its interaction with ovalbumin produces a strong structure-breaking effect. The most powerful water structure breaker in albumin-water solutions is dextrane. In a concentration of 10 % it changes the polymer conformation so that the water structure is broken to such an extent that the solution behaves as an almost quasifree liquid withT ₀=O.     

Monte Carlo simulation of a lattice model for ternary polymer mixtures

Monte Carlo studies of symmetrical polymer mixturesAB, modelled by selfavoiding walks withN _A =N _B =N steps on a simple cubic lattice, are presented for arbitrary concentrations of vacancies _v in the range from _v =0.2 to _v =0.8 and chain lengthsN64. We obtained the phase diagrams and the equation of state for three choices of the ratio / _AB ( being the energy between monomers of the same kind, _AB being the energy between different monomers). Flory-Huggins theory provides only a qualitative understanding of these results. If the equation of state is fitted with an effective Flory-Huggins parameter _eff , the latter turns out to be strongly dependent on both concentration and temperature.Contributed paper delivered at the Tagung der Deutschen Physikalischen Gesellschaft, Fachausschuß Polymerphysik, Berlin, March 30–April 3, 1987.     

Cubic phases in surfactant and surfactant-like lipid systems

Cubic liquid crystalline phases are common in surfactant and surfactant-like lipid systems at temperatures above the Krafft point. They are optically isotropic and very stiff. Therefore, they are often not recognized as independent phases and separated in pure state. The liquid crystalline nature is evidenced by a low-angle diffraction pattern with sharp reflections having Bragg-values above 20 Å coupled with a diffuse wide-angle reflection at 4.5 Å, proving that the hydrocarbon moiety is in a liquid state. The cubic phases occur in a variety of lipid/water systems (also with liquid organic solvents), such as simple soaps, amphiphilic lipids of biological origin, and extracts from membrane lipids. The location of the cubic phases in a phase diagram varies.The original concept of a cubic structure composed of closed globular aggregates, either of oil-in-water or water-in-oil type in face-centered array seems to be obsolete. The present structure concepts include closed anisotropic aggregates, short rod-like aggregates forming continuous networks or lamellar aggregates with zero curvature forming networks of Infinite Periodic Minimal Surfaces (IPMS). The structure is mostly primitive or body-centered cubic.     

Dielectric properties of cleaned and monodisperse polystyrene latexes in microwaves

The dielectric behavior (, ) of three well-cleaned monodisperse polystyrene latexes having the same particle size and the same number of chemically-bound surface groups has been studied at a fixed microwave frequency (9.4 GHz), as a function of temperature and surface group (SO ₄ ^– , COO^–, OH).A large dielectric relaxation was observed in the sulfate-stabilized latex, which has the most polar surface end-group. The anomalous behavior in the thermal dependence of the hydroxyl and carboxyl-stabilized latexes (the OH latex being more pronounced than the COO^– latex) may originate from differences in the experimental conditions used for the preparation of such polymer colloids, or due to the presence of ionic species.On the basis of various dielectric models, the apparent volume fractions of the latexes were calculated. The amount of bound water around the latex particle was quantitatively correlated to the polarity of surface end-group (SO ₄ ^– > COO^– > OH). The differences between the calculated and actual values were not only a reflection of the thickness of vicinal water, but could also be indicative of the presence of oligomeric species in the suspension's medium (serum) of the latex. The permittivities of hydrated particle and of bound water were obtained with a non-linear iterative procedure.     

Preparation of micron-size monodisperse polymer particles having highly crosslinked structures and vinyl groups by seeded polymerization of divinylbenzene using the dynamic swelling method

Micron-size monodisperse polystyrene/polydivinylbenzene (PS/PDVB) composite particles having highly crosslinked structures and vinyl groups were prepared as follows. First, 1.9 m-size monodisperse PS seed particles produced by dispersion polymerization were dispersed in ethanol/water (70/30, w/w) solution which dissolved divinylbenzene (DVB) monomer, benzoyl peroxide as an initiator and poly(vinyl alcohol) as a stabilizer. The PS seed particles were swollen with a large amount of DVB monomers to 4.3 m in diameter while keeping good monodispersity by the dynamic swelling method, where water was slowly added, continuously, with a micro feeder into the dispersion. And then, the seeded polymerization of the absorbed DVB was carried out.Part CXXXV of the series Studies on Suspension and Emulsion     

Phase diagram of the system dihexadecylphosphatidylcholine/dihexadecyl-phosphatidic acid/water/NaOH at pH=14

Differential-scanning-calorimetry, freeze-fracture electron microscopy, and³¹P-NMR spectroscopy were used to study the lyotropic and thermotropic properties of the system dihexadecylphosphatidylcholine/dihexadecylphosphatidic acid/water/ NaOH in dispersion with excess water at pH=14. The phase diagram showed that both phospholipids are demixed nearly completely in the gel phase. The coexistence of theP and theB -phase in the mixtures was pointed out in the freeze-fracture electron micrographs by the ripple structure (P -phase) and by the lamellar structure (B -phase).     

Effect of random copolymerization on growth transition and morphology change in polypropylene

The growth rate of an ethylene-propylene random copolymer with a 2.8% w/w ethylene content was studied in a similar manner to polypropylene. A growth regime transition associated with a birefringence change was observed at 130C, while the same phenomena appeared at 138C in isotactic polypropylene. In both polymers positive birefringence corresponds to Regime III, whereas negative birefringence of spherulites is associated with Regime II. The birefringence change is attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae at low temperature (Regime III) and preferentially radiating lamellae at higher temperature (Regime II). We confirm that such a morphological change can be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. Thus, quadritic morphology seems to have a partly kinetic origin. The shift of the transition temperature in the copolymer is due to the rejection of ethylene segments at the surface of crystalline lamellae of polypropylene.     

Covalent immobilization of trypsin onto poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres by cyanogen bromide method and its enzymatic activity

Covalent immobilization of trypsin onto poly(2-hydroxyethyl methacrylate)/ polystyrene composite microspheres, produced by emulsifier-free seeded emulsion polymerization technique, was carried out using the cyanogen bromide method under various conditions. The highest enzymatic activities of the trypsin immobilized in this study against N--benzoyl-L-arginine ethyl ester and N--benzoyl-L-arginine-p-nitroanilide, as low-molecular substrates and casein as a high-molecular substrate, were high, as corresponding to 80%, 85% and 50% of those of free trypsin, respectively.Part C of the series Studies on Suspension and Emulsion.     

Study of the polymer latex coalescence by dielectric measurements at microwave frequency—feasibility of the method

The measurement of the complex dielectric constant ( ^*=–j) in the dipolar absorption domain of the free water molecule (microwave region) permits us to follow quasi-specifically and precisely the water circulation during the coalescence process of a latex. Weight losses and dielectric constants variations have been simultaneously recorded upon latex drying, in a resonant cavity at 5 and 9 GHz and under controlled atmosphere and temperature. Two different latexes were studied (polybutylacrylate (PBuA) and polystyrene (PS)) from which the glass transition temperature effect was investigated. It is found that the harder the polymer particles, the more clearly evidenced the flocculation and packing points are. This method appears to be quite reliable for discriminating the various steps in the film formation process of latexes.     

Macromolecular conformations at the water-air interface: Interactions between alpha and beta conformations of polypeptides

Bidimensional miscibility between alpha and beta conformations of polypeptides was investigated at the water-air interface in the 15°–30°C temperature range. The polypeptides were poly--methyl-L-glutamate (PGMG), poly--benzyl-L-glutamate (PGBG) and poly--benzyl-L-aspartate (PBBA). The polypeptide conformations, alpha or beta, were checked by IR spectroscopy using the MIR technique.The spreading isotherms for mixed monolayers alpha-PGMG/alpha-PGBG and beta-PGMG/beta-PBBA showed bidimensional miscibility both for alpha-alpha and beta-beta mixtures.For the alpha-alpha system, attractive interactions among the polypeptide alphahelices were found (G_mix<0) and the driving factor appeared to be the entropic one (packing). Compressibility moduli and surface potential measurements showed a fluidification effect of alpha-PGBG on mixed monolayers. In the case of beta-beta mixed monolayers, ideal behaviour was observed and no fluidification effect detected.Scanning electron micrographs made on collapsed monolayers showed hexagonal structures for alpha-alpha mixtures and no well-defined or characterized features for the beta-beta system.     

Effect of thick fixed-charge layers on electrostatic interaction — a theoretical approach

The electrostatic interaction pressure of charged surface layers is considered qualitatively and quantitatively. In the case of mutual penetration of the surface layers in addition to Maxwell stress and osmotic resp. hydrostatic pressure an isotropic stress on the fixed charges carrying molecules of the surface layers has to be taken into account. The derivation of the pressure-distance equations is given starting from both thermodynamic/electrostatic and hydrostatic/electrostatic principles. A possible biological significance of the additional stress is discussed emphasizing its role in modifying the structure of surface layer molecules.List of symbols e ₀ elementary charge - k Boltzmann constant - n _i concentration of theith ionic species in the bulk solution - P hydrostatic pressure - P hydrostatic pressure in the bulk volume (× ) - P ^h integration constant, independent on ×:P ^h =P(h) - T absolute temperature - Z _i electrovalence of theith ionic species - thickness of the surface layer - , ₀ relative and absolute permittivities - II(×) osmotic pressure at position × - II osmotic pressure in the bulk solution (× ) - osmotic pressure in the symmetry plane of interacting identical surface layers (electric field strength equals zero) - integration constant, independent on ×: - _e ^h electrostatic component of the disjoining pressure _e ^h = _e (h) - (×) mobile charge density profile (cations and anions of the electrolyte) - (×) fixed charge density profile - ^t(x) total charge density profile ( ^t = +) - ¹(x) fixed charge density profile of one of the two surface layers ( ¹(×) 0 for 0×) - (×) electric potential profile     

Dielectric properties of moist CaCO3 filled polyethylene composites

The capacitance and the dielectric loss tangents of CaCO₃ filled polyethylene composites were studied. Composite samples, prepared by polymerizing ethylene on the surfaces of fillers, pre-treated by polymerization catalysts, were compared to normal mechanical mixtures. Dielectric dispersion,, and loss, , proved to be sensitive to heating or vacuum treatment. Investigation of samples under conditions of different relative humidities showed that the dielectric dispersion is due to adsorbed water. Both and increased with decreasing frequency and the ratio of loss and dispersion was nearly constant. Dielectric data measured at different relative humidities could be represented by a single Cole-Cole plot. Samples soaked in water for different periods yielded qualitatively similar but quantitatively different Cole-Cole plots. Composite samples showed higher losses at similar humidities.Possible interpretations in terms of a molecular relaxation model, an interfacial relaxation model, including a charged double layer mechanism, percolation theory and the universal response theory were examined, but none was able to fully explain the observed phenomena.     

Meeting the need for reference measurements

Summary Reference materials do fulfil a very useful function in that they provide means to check, verify and calibrate measurement procedures and instrumentation. However, the material is often idealized compared to real life samples: it is either (very) pure or does not correspond in concentration level or matrix to the real life case. It is shown how this situation could be remedied if real life samples with carefully assessed reference values could be made available regularly as unknowns to measurement laboratories. Comparison of the latter's measurements with the reference values then would provide a picture of the real performance of the particular measurement community in general and of each participating laboratory in particular. The opinion is expressed that isotope-specific methods have now matured to the stage that, if they are correctly applied under rigorous control and based on highly skilled expertise, they can provide such reference values against which laboratories can then evaluate their routine performance in regular Interlaboratory Measurement Evaluation Programmes (IMEPs).

---

Wie der Notwendigkeit von Referenzmessungen entsprochen werden kann

     

Complex polarizability as used to analyze dielectric relaxation measurements

The effect of representing dielectric properties in terms of the complex polarizability ^c = – i is examined. Loss curves ( and tan ) are shifted towards higher frequencies, revealing the existence of new relaxations and allowing the clarifications of ones already known. We have calculated the shift ratios (at maximum or tan )/ (at maximum or tan ) from the more conventional empirical equations representing the dielectric behavior. Some examples are given.     

Production of anomalous polymer microspheres having uneven surfaces by “stepwise” heterocoagulation technique

Anomalous polymer microspheres having uneven surfaces were produced by stepwise heterocoagulation technique of small polymer particles (SPs) onto large polymer particles (LPs).SPs andLPs have surface charges opposite to each other in the emulsion states.SPs were produced by emulsion copolymerization of styrene and methacryloyloxyethyltrimethylammonium chloride, andLPs by emulsion terpolymerization of styrene, butyl acrylate and methacrylic acid, with nonionic emulsifier being used in both cases. Maximum covering ofLP bySPs was obtained under the conditions that both emulsions were blended without the coagulation at pH 3 at room temperature and then left stand to coagulate with each other at 70 °C for 4 h at pH 9.Part CXI of the series Studies on Suspension and Emulsion.     

Large deformation in filled networks of different architecture and its interpretation in terms of the van der Waals network model

The first quasi-static stretch of the two limiting systems of filler loaded rubber have been investigated. One of them is found by filler to matrix contacts only, the other by crosslinking permanently the matrix. In this case filler-matrix contacts are made by adhesion. The experimental results were described in terms of an extended van der Waals approach. It is illuminated that different filler to matrix contact (permanent bonds or adhesion) lead to different deformation mechanism, substantially affecting the reinforcement. Moreover, filler induced local field-modifications due to the boundary value problem can be understood with the Einstein-Smallwood approach independent of the kind of the filler to matrix contacts.     

The acceleration of decomposition of potassium persulfate in the presence of sodium dodecyl sulfate and polymer particles as a model of emulsion polymerization system

The decomposition rates of potassium persulfate (KPS) in aqueous solutions containing sodium dodecyl sulfate (SDS) in the presence of polystyrene or poly(methyl methacrylate) particles as models of emulsion polymerization systems were measured by isotachophoresis. Free SDS molecules dispersed in the monomolecular state had an ability to accelerate the KPS decomposition, but SDS molecules adsorbed onto the polymer particles did not accelerate it.Part CXX of the series of Studies on Suspension and Emulsion