Synthesis and self-assembly of comb-like amphiphilic copolymer poly(maleic anhydride-<Emphasis Type="Italic">alt</Emphasis>-stearyl methacrylate)-<Emphasis Type="Italic">b</Emphasis>-poly(stearyl methacrylate)

Comb-like amphiphilic block copolymers of maleic anhydride (MA) and stearyl methacrylate (SMA) were prepared through the reversible-addition-fragmentation-transfer polymerization. The resultant copolymers were characterized by gel permeation chromatograph and ¹H NMR. The aggregation behaviors of P(MA-alt-SMA)-b-PSMA were investigated in tetrahydrofuran/water. It is of great interest that the aggregates with different morphologies and dimensions could be obtained by adjusting the polymer concentration, water content, and pH. The dimension and structure of these aggregates were investigated by transmission electron microscopy and dynamic light scattering. The effect of the copolymer–solvent interaction on these aggregations was discussed.     

Effects of ionization on the phase behavior of poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-acrylic acid) and poly(<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethylacrylamide-co-acrylic acid) in water

Phase transitions of poly(N-isopropylacrylamide-co-acrylic acid) (PiPA-AA) and poly(N,N- diethylacrylamide-co-acrylic acid) (PdEA-AA) in water have been investigated by means of turbidimetry, Fourier transform infrared (FTIR) spectroscopy and differential scanning calorimetry (DSC). The phase transition temperatures (T_p) of these copolymers increase with the degree of ionization () of the acrylic acid (AA) units, which in turn is dependent on the pH of the solutions. Apparent values of pK_a for the AA units, determined from the pH dependencies of T_p, are 4.7 and 5.4 for PiPA-AA and PdEA-AA, respectively. Differences between T_p for PiPA-AA and T_p for PiPA homopolymer (T_p) are +1.5 and –0.2 °C/mol% of AA at =1 and 0, respectively. The values of T_p for PdEA-AA are +2.6 (ionic) and –0.5 (nonionic)°C/mol%, indicating that the incorporated AA units have a larger effect on PdEA than on PiPA. DSC measurements performed with each of these copolymers at different pH values show a linear relationship between T_p and the enthalpy of transition (H). IR measurements of PiPA-AA show that the profiles of IR bands from both iPA and AA units exhibit critical changes at T_p of the copolymer. Heating the solution above T_p leads to shifts of the amide II, C–H stretch, and C–H bend bands from the iPA units toward lower wavenumbers, as well as a shift of the amide I band from the iPA units toward higher wavenumbers. A decrease in the intensity of the symmetric C=O stretch IR band from carboxylate anions (1560 cm^–1), and an increase in the intensity of the C=O stretch band from COOH groups (1705 cm^–1) suggest that a partial protonation of the carboxylate groups (COO^–+H⁺COOH) takes place upon the phase transition.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-(2-chloroethyl)glycine and -<Emphasis Type="SmallCaps">DL</Emphasis>-alanine esters

Two methods for the synthesis of N-(2-chloroethyl)glycine and-DL-alanine esters are proposed: 1) reductive amination of the C=O group of glyoxilic or pyruvic acids upon treatment with 2-chloroethylamine and sodium cyanoborohydride in methanol and 2) alkylation of 2-chloroethylamine with α-haloalkanoic acid esters in K₂CO₃-MeCN two-phase system. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2372–2374, December, 2007.     

Synthesis of graft copolymers of wood and <Emphasis Type="Italic">N</Emphasis>-vinylpyrrolidone

Lignocellulose copolymers with grafted lactam rings were prepared by graft copolymerization of wood with N-vinylpyrrolidone initiated by Fe²⁺-H₂O₂. The principal features of their formation were investigated as functions of reactant concentrations, temperature, and polymerization time. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 2, pp. 174–176, March–April, 2008.     

Synthesis and characterization of thermoresponsive poly(<Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide-co-<Emphasis Type="Italic">N</Emphasis>-hydroxymethylacrylamide-co-2-hydroxyethyl methacrylate) hydrogels

Thermoresponsive hydrogels based on N-isopropylacrylamide, N-hydroxymethylacrylamide, and 2-hydroxyethyl methacrylate, poly(NIPAM–co-NHMAAm–co-HEMA), have been synthesized and their swelling—deswelling behavior studied as a function of NIPAM concentration, NIPAM/NHMAAm and NIPAM/HEMA mole ratio, and total monomer concentration. Copolymers varying in composition have been obtained by redox copolymerization of these three monomers. Temperature has been changed in the ranges from 4 to 70 °C at fixed pH and total ionic strength. Equilibrium swelling ratio, dynamic swelling ratio, and dynamic deswelling ratio were evaluated for all hydrogel systems. The equilibrium swelling ratios of the copolymeric gels decrease with increasing NHMAAm and HEMA content. The formation of the intermolecular hydrogen bonding between hydroxyl and amido groups decreases the hydrophilic group numbers of the gel and the affinity of the gel towards water decreases. The copolymer gels also showed rapid volume transitions with time. The time required for equilibrium shrinking increased with increasing NHMAAm and HEMA content in the gel.     

Adsorption of<Emphasis Type="Italic"> N</Emphasis>-dodecyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl-3-ammonio-1-propanesulfonate (DDAPS), a model zwitterionic surfactant,on the Au(111) electrode surface

Electrochemical measurements including cyclic voltammetry, differential capacity, and chronocoulometry have been used to characterize the adsorption behaviors of the zwitterionic surfactant N-dodecyl-N,N-dimethyl-3-ammonio-1-propanesulfonate (DDAPS) on the Au(111) electrode surface. The thermodynamics of the ideally polarized electrode have been employed to determine the Gibbs excess and the Gibbs energy of adsorption. The results show that the adsorption of DDAPS has a multistate character. The first two states are observed at potentials close to zero charge. At low bulk DDAPS concentrations, it corresponds to the formation of a film of nearly flat adsorbed molecules. At higher concentrations it is converted into a hemimicellar state. The second state is formed at negative potentials and charge densities close to 0 C cm^–2. It corresponds to a film of tilted molecules oriented with the hydrocarbon tail towards the metal and the polar head toward the solution.Dedicated to Professor Zbigniew Galus on the occasion of his 70^th birthday and in recognition of his many contributions to electrochemistry.     

Determination of epoxides by high-performance liquid chromatography following derivatization with <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyldithiocarbamate

A reversed-phase, high-performance liquid chromatography (RP-HPLC) method that allows quantitation of low levels of epoxides has been described. The method involved derivatization of epoxides using 100- to 1,000-fold excess N,N-diethyldithiocarbamate (DTC) at 60 °C for 20 min at neutral pH. The unreacted DTC was then decomposed to CS₂ and diethyl amine by acidification of the reaction mixture to pH 2 using orthophosphoric acid. The first two steps could be performed in the same reaction vessel by sequential addition of reagents. In the final step, an aliquot (20 μL) of the derivatized sample was analyzed for the presence of stable esters of DTC by RP-HPLC using a Supelcosil LC-18-S (150 × 4.6-mm) column and a mobile phase consisting of 40% (v/v) acetonitrile in water at a flow of 1 mL min⁻¹. Using UV detection at 278 nm, the epoxides gave linear responses in the concentration range of 0.25 to 50 μM. The method is robust, and as low as 5 pmol of the analyte could be successfully detected and quantified with recoveries of ≥94%. Following a minimal pretreatment such as ultrafiltration (molecular weight cutoff 5,000 Da), the method is suitable for analysis of epoxides in complex physiological fluids (e.g., fetal bovine serum). The method has been rigorously evaluated and adapted in our laboratory for routine analysis and determination of stability of epoxides of 1,3-butadiene and other alkenes added to cell cultures.     

Preparation of nanoparticle colloids of methoxy poly(ethylene glycol)-<Emphasis Type="Italic">b</Emphasis>-poly(<Emphasis Type="SmallCaps">D</Emphasis>,<Emphasis Type="SmallCaps">L</Emphasis>-lactide): effects of surfactant and organic solvent

Nanoparticle colloids of methoxy poly(ethylene glycol)-b-poly(D,L-lactide) (MPEG-b-PDLL) diblock copolymer were prepared by a modified spontaneous emulsification solvent diffusion method using acetone/ethanol as the mixture organic solvents. The MPEG-b-PDLL was synthesized by ring-opening polymerization of D,L-lactide using stannous octoate and MPEG with molecular weight of 5,000 g/mol as the initiating system. The MPEG-b-PDLL obtained was an amorphous polymer with molecular weight of 73,600 g/mol. Influences of acetone/ethanol (v/v) ratios and Tween 80 surfactant concentrations on characteristics of the colloidal nanoparticles were investigated and discussed. Light-scattering analysis showed that average diameters of the surfactant-free colloidal nanoparticles were in the range of 86–124 nm. The nanoparticle sizes decreased as the ethanol ratio increased. The Tween 80 did not show the significant effect on the nanoparticle sizes. Scanning electron micrographs of dried nanoparticles that demonstrated the aggregation of most particles suggested they were the soft nanoparticles. However, the dried nanoparticle morphology can be observed from scanning electron microscopy as having a spherical shape and smooth surfaces.     

Electrooxidation of undiluted organic liquids swelling<Emphasis Type="Italic"> N</Emphasis>-isopropylacrylamide-based copolymers

Polyacrylate gels such as: N-isopropylacrylamide (NIPA), ionic copolymer NIPA-co-sodium acrylate (NIPA-co-SA) and ionic copolymer NIPA-co-[2-(acryloyloxy)ethyl]trimethylammonium chloride (NIPA-co-XCl) were swollen by methanol, ethanol and N,N-dimethylformamide. These solvents were oxidized voltammetrically in the gels at platinum microelectrodes. The blocking coefficients, defined as the ratio of the currents observed in the presence and absence of the polymeric chains, were different for the solvents in the charged and uncharged polymers and did not differ for the electroactive probe, ferrocene, present in the solvents at millimolar level. This may mean that the micro ionic layer that is formed at microelectrodes at the plateau of the voltammetric solvent waves leads to a kind of collapse/phase transition of the polymer in the depletion layer. For methanol, the gel structure was found to prevent occasionally the formation of large gas bubbles at the potentials positive versus the first wave and then three one-electron waves could be obtained. Experiments done with a capillary cell and an optical microscope indicated that before formation of large bubbles at the Pt microelectrode a very dynamic, dense stream of microbubbles leaves the electrode surface.Dedicated to Zbigniew Galus on the occasion of his 70th birthday     

Effect of Cu(II) on the electrochemically initiated reaction of thiols with<Emphasis Type="Italic"> N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diethyl-<Emphasis Type="Italic">p</Emphasis>-phenylenediamine: methodology for the indirect voltammetric determination of Cu(II)

The effect of Cu(II) on the determination of homocysteine via its electrochemically initiated reaction with N,N-diethyl-p-phenylenediamine is examined. The presence of copper inhibited the detection process for homocysteine owing to a complexation reaction occurring. This provided an indirect route for the sensitive and selective determination of Cu(II), which produced a linear response over the range from 2.5 to 500 M and a limit of detection of 2.5 M. The detection pathway was examined in the presence of metallic and inorganic ions, with negligible interference observed.     

An efficient <Emphasis Type="Italic">Mannich</Emphasis>-type synthesis of <Emphasis Type="Italic">bis</Emphasis>(pyrido[2,1-<Emphasis Type="Italic">b</Emphasis>][1,3,5]thiadiazin-7-yl)-methanes

Morpholinium 3-cyano-4-methyl-6-oxo-1,6-dihydropyridine-2-thiolate upon treatment with primary amines and a formaldehyde excess under mild conditions produces bis(pyrido[2,1-b][1,3,5]thiadiazin-7-yl)methane derivatives in good yields (67–87%). Correspondence: Victor V. Dotsenko, State Enterprise “Luganskstandartmetrology”, 91021 Lugansk, Ukraine.     

The smallest Hosoya index in (<Emphasis Type="Italic">n</Emphasis>, <Emphasis Type="Italic">n</Emphasis> + 1)-graphs

A (n, n + 1)-graph G is a connected simple graph with n vertices and n + 1 edges. In this paper, we determine the lower bound for the Hosoya index in (n, n + 1)-graphs in terms of the order n, and characterize the (n, n + 1)-graph with the smallest Hosoya index.     

New acyl derivatives of <Emphasis Type="Italic">N</Emphasis>-deacetyllappaconitine

New N-acylates of the norditerpenoid alkaloid N-deacetyllappaconitine that were modified in the aromatic ring and are interesting as potential pharmacologically valuable compounds were prepared. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 275–279, May–June, 2008.     

Temperature- and pressure-responsive properties of <Emphasis Type="SmallCaps">l</Emphasis>- and<Emphasis Type="SmallCaps"> dl</Emphasis>-forms of poly(<Emphasis Type="Italic">N</Emphasis>-(1-hydroxymethyl)propylmethacrylamide) in aqueous solutions

The structural transition of the l- and dl forms of poly(N-(1- hydroxymethyl)propylmethacrylamide (PHMPMA) in aqueous solution was studied by measuring the pressure dependence of the apparent scattering intensity, differential scanning calorimetry (DSC), and circular dichroism (CD). The thermodynamic implications of the results are discussed in relation to the chiral structure of the side chain, and differences in the thermal and barometric transitions. T-P diagrams of the transition showed characteristic ellipsoid features. Antagonism of the temperature and pressure effects was observed only for P(dl-HMPMA). For P(l-HMPMA), the transition temperature (T _tr) decreased with increasing pressure, and the highest T _tr was observed at atmospheric pressure (0.1 MPa). For both polymers, the highest P _trs were observed at the lowest temperatures. The l polymer showed a specific negative peak in its CD spectrum at around 220 nm in the lower temperature region and the temperature dependence was reproduced by a single-step transition, with the midpoint corresponding to the T _tr obtained from the scattering measurements. Coupled with the results from the DSC, the different behavior between the P(l-HMPMA) and P(dl-HMPMA) could be explained in terms of the chain states before and after the transition. The cooperative factors derived from the DSC measurement revealed that about 4 to 5 polymers of the present size were necessary to perform a thermal transition for P(l-HMPMA), and that P(dl-HMPMA) underwent its transition as an almost single molecular event.This revised version was published online in June 2005 with correction to the article category.     

Starch Derivatives of High Degree of Functionalization 11: Studies on Alternative Acylation of Starch with Long-chain Fatty Acids Homogeneously in <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethyl acetamide/LiCl

Starch materials of different amylose content were allowed to react with saturated and unsaturated fatty acids of varying chain length from C₁₄ to C₁₈ under homogeneous conditions applying the solvent N,N-dimethyl acetamide in combination with LiCl. As reagent the corresponding acid chlorides and, alternatively, carboxylic acids in situ activated with toluene-4-sulfonyl chloride and N,N′-carbonyldiimidazole (CDI) were studied. Using fatty acid chlorides (FACl) and toluene-4-sulfonyl chloride-activated acids an almost complete substitution of the starch occurs. By in situ activation of the fatty acids with CDI, products with a degree of substitution up to 2 were obtained, which, in particular, represents a simple and very mild procedure.     

Molecular properties of the copolymers of <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-diallyl-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-dimethylammonium chloride and maleic acid

The hydrodynamic and conformational properties of molecules of poly(N,N-diallyl-N,N-dimethylammonium chloride) and N,N-diallyl-N,N-dimethylammonium chloride-maleic acid copolymers of different compositions in solutions with various ionic-strength and pH values, as well as of the polyelectrolyte complex based on the copolymer with dodecyl sulfate anions in chloroform, are studied. For poly(N,N-diallyl-N,N-dimethylammonium chloride) molecules in a 1 M NaCl solution, the Kuhn segment length and the hydrodynamic diameter of the chain are estimated as A = 3.9 nm and d = 0.48 nm, respectively. In acidic solutions with pH 3.5, the copolymers demonstrate behavior typical for polyelectrolytes. In an alkaline solution with pH 13, when 1 M NaCl is added to the solution of the copolymer containing 29 mol % maleic acid units, there is an antipolyelectrolyte effect that manifests itself as an increase in the intrinsic viscosity of the copolymer and in the hydrodynamic radius of its molecules. It is found that an increase in the fraction of maleic acid units in the copolymer from 12 to 42 mol % brings about a reduction in the equilibrium rigidity of its macromolecules from 4.1 to 2.2 nm. The equilibrium rigidity of polyelectrolyte-complex molecules is higher than that of initial copolymer molecules owing to steric interactions arising between the aliphatic chains of dodecyl sulfate anions. In an electric field, the molecules of the complex are oriented owing to the induced dipole moment resulting from the displacement of dodecyl sulfate anions along the chain contour.     

<Emphasis Type="Italic">N</Emphasis>-bridged heterocycles: regiospecific synthesis of 2-methyl-4H-pyrimido[2,1-<Emphasis Type="Italic">b</Emphasis>]benzothiazol-4-ones

N-bridged heterocycles, 2-methyl-4H-pyrimido[2,1-b]benzothiazol-4-ones, have been synthesized in quantitative yield by the reaction of 2-aminobenzothiazoles with ethylacetoacetate in the presence of polyphosphoric acid involving dehydrative condensation followed by cyclization. The possibility of the formation of 4-methyl-2H-pyrimido[2,1-b]benzothiazol-2-ones has been excluded on the basis of spectral studies.     

Association behavior of one-end hydrophobically modified poly[<Emphasis Type="Italic">N</Emphasis><Superscript>5</Superscript>-(2-hydroxyethyl) <Emphasis Type="SmallCaps">l</Emphasis>-glutamine] in water/ethylene glycol mixed solvent

Amphiphilic polymers Cn-PHEG consisting of water-soluble poly[N ⁵-2-(hydroxyethyl) l-glutamine] (PHEG) and hydrophobic alkyl chain (carbon number n = 12, 14, 16, or 18) attached at the PHEG terminal was prepared, and association behavior and structure of associate for Cn-PHEG in selective solvent (water/ethylene glycol mixed solvent) have been investigated. α-Helix content of PHEG block for all the polymers increased with weight fraction of ethylene glycol in the mixed solvent (W _EG). By light scattering measurements, formation of a small micelle was suggested for C14-, C16-, and C18-PHEG when W _EG = 0. With the increase in W _EG, appearance of a larger associate was revealed for C16- and C18-PHEG. Evaluated molecular weight and radius of gyration suggested that the micelle is star-like sphere when W _EG = 0 and worm-like cylinder when W _EG = 0.7. C12-PHEG did not demonstrate any distinct micellization behavior because of the weak hydrophobicity of C12 chain.     

Theoretical and experimental study of molecular structure and vibrational spectra of <Emphasis Type="Italic">N</Emphasis>-(2-pyridylmethyl)-2-pyrazinecarboxamide

N-(2-Pyridylmethyl)-2-pyrazinecarboxamide was prepared and its crystal structure was investigated by X-ray analysis. The compound crystallizes in the triclinic space group \(P{\bar 1}\) with a = 4.262(3), b = 12.117(9), c = 20.840(18) Å, α = 91.802(6), β = 89.834(7), γ = 91.845(6)°, V = 1075.2(16) ų, Z = 4, and D = 1.323?Mg/m³. The structure was solved by direct method and refined to R = 0.0699 and wR ₂ = 0.1268 by full matrix anisotropic least-squares method. Using the Hartree-Fock and density functional method (B3LYP) with 6-31G(d) basis set, the molecular geometry and vibrational frequencies of the title compound has been investigated and compared with experimental ones from experimental studies. The optimized bond lengths obtained by RHF method and bond angles obtained by B3LYP method show better agreement with the experimental values. The vibrations computed of the title compound by the RHF and DFT methods are in good agreement with the observed IR spectra data.     

Screening and Immobilization <Emphasis Type="Italic">Burkholderia</Emphasis> sp. GXU56 Lipase for Enantioselective Resolution of (<Emphasis Type="Italic">R</Emphasis>,<Emphasis Type="Italic">S</Emphasis>)-Methyl Mandelate

Microorganisms producing lipase were isolated from soil and sewage samples and screened for enantioselective resolution of (R,S)-methyl mandelate to (R)-mandelic acid. A strain designated as GXU56 was obtained and identified as Burkholderia sp. Preparing immobilized GXU56 lipase by simple adsorption on octyl sepharose CL-4B, the optimum temperature was shifted from 40 °C (free lipase) to 50 °C (immobilized lipase), and the optimum pH was shifted from 8.0 (free lipase) to 7.2 (immobilized lipase). The immobilized enzyme displayed excellent stability in the pH range of 5.0–8.0, at the temperatures below 50 °C and in organic solvents compared with free enzyme. Enantioselectivity ratio for (R)-mandelic acid (E) was dramatically improved from 29.2 to more than 300 by applying immobilized lipase in the resolution of (R,S)-methyl mandelate. After five cycles of use of immobilized lipase, conversion and enantiomeric excess of (R)-mandelic acid were 34.5% and 98.5%, respectively, with enantioselectivity ratio for (R)-mandelic acid (E) of 230. Thus, octyl-sepharose-immobilized GXU56 lipase can be used as a bio-resolution reagent for producing (R)-mandelic acid.